Amplifiers

Immerse yourself in the world of professional audio amplification with the RCF IPS 1.5K 2-Channel Power Amplifier. Delivering 2 x 750 Watts at 4 Ohms impedance, this top-of-the-line amplifier ensures powerful and crystal-clear sound performance for live performances or studio recordings. Thanks to its Class-H power amplification technology, this amplifier guarantees fast response, low distortion, and versatile operation modes including stereo, parallel, and bridge. The IPS 1.5K is further equipped with an extensive protection circuit, variable speed cooling system, and signal, clip, and fault LED indicators to ensure reliable and safe operation under various conditions. Elevate your sound quality, enhance your performance, and unleash the full potential of your audio system with the exceptional features and performance capabilities of the RCF IPS 1.5K 2-Channel Power Amplifier.Specifications:- Power Output: 2 x 750 Watts @ 4 Ohms impedance- Technology: Class-H power amplification- Operation Modes: Stereo, Parallel, Bridge- Protection: Extensive protection circuit- Cooling System: Variable speed cooling- Indicators: Signal, Clip, Fault LED indicatorsProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 750 W @ 4 ohm 2 x 500 W @ 8 ohm 1 x 1500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <73 dB Distortion (THD+N) @ 1 kHz nominal power: <0.02 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 600 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 264 mm / 10.39 inches Weight: 10.5 kg / 23.15 lbs

Read more less

Step into the realm of professional audio amplification with the RCF IPS 2.5K 2-Channel Power Amplifier. Boasting a formidable 2 x 1250 Watts of power output at 4 Ohms impedance, this amplifier is a powerhouse designed to elevate your sound experience to new heights. Equipped with cutting-edge Class-H power technology, this amp ensures fast response and minimal distortion, delivering crisp and clear audio across a wide frequency range. Whether you prefer stereo, parallel, or bridge mode, the IPS 2.5K offers flexibility in connectivity to suit your setup preferences. Safety and reliability are at the core of the IPS 2.5K design, with an extensive protection circuit safeguarding your equipment from potential damage. The variable speed cooling system, along with signal/clip/fault LED indicators, provides peace of mind while ensuring optimal performance even during prolonged use. Elevate your audio setup and immerse yourself in crystal-clear sound with this professional-grade amplifier designed for modern audio environments.Specifications:- Power Output: 2 x 1250 Watts @ 4 Ohms- Amplifier Type: Class-H- Impedance: 4 Ohms- Connectivity Modes: Stereo, Parallel, Bridge- Protection Circuitry: Yes- Cooling System: Variable Speed- LED Indicators: Signal/Clip/FaultProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 1250 W @ 4 ohm 2 x 800 W @ 8 ohm 1 x 2500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <80 dB Distortion (THD+N) @ 1 kHz nominal power: <0.01 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 11.2 kg / 24.69 lbs

Read more less

Step into the realm of professional audio excellence with the RCF IPS 5.0K 2-Channel Power Amplifier. Delivering a potent 2 x 2600W Class-H power output at 4 ohms, this amplifier is engineered to provide exceptional sound quality with rapid response and minimal distortion. Designed for professional audio setups, the RCF IPS 5.0K excels in versatility and reliability, offering stereo, parallel, and bridge modes to accommodate various audio needs. Safety is a top priority with this amplifier, featuring an elaborate protection circuitry that safeguards against short circuits, thermal issues, and DC faults. Each channel of the amplifier is equipped with a limiter, providing precise control over the audio output. The variable speed cooling system, in conjunction with high-efficiency heat sinks and fans, ensures optimal performance even in challenging thermal conditions. Key Specifications:- Power Output: 2 x 2600W @ 4Ω- Class: Class-H- Modes: Stereo, Parallel, Bridge- Protection Circuitry: Short Circuit, Thermal, DC Protections- Cooling System: Variable Speed Cooling System- Connectors: Stereo XLR Input and Output, speakON, Binding Post Output- Indicators: Signal/Clip and Fault LED IndicatorsElevate your audio setup with the RCF IPS 5.0K 2-Channel Power Amplifier and experience unparalleled power, versatility, and reliability in every performance.Product Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 2600 W @ 4 ohm 2 x 1500 W @ 8 ohm 1 x 5200 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.04 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1800 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 21.6 kg / 47.62 lbs

Read more less

Elevate your audio experience with the RCF QPS 10K 4-Channel Class HD Power Amplifier. This professional amplifier delivers an impressive 4 x 2,500 W of power at 2 Ohms, ensuring a powerful and high-quality sound output. With a design focused on safety and longevity, the QPS 10K features comprehensive protection circuits against shorts, open circuits, and thermal issues. Its variable speed cooling system, alongside high-efficiency heat sinks and fans, guarantees reliability even in challenging environments. Versatile and precise, this amplifier offers independent gain control, signal/clip and fault indicators, and XLR output links for channels A and C, providing you with full control over your audio output. Choose from stereo, parallel, and bridge modes to suit various setups and requirements. Invest in the RCF QPS 10K for cutting-edge power amplification technologies, reliability, and superior sound quality.Important specifications:- Power: 4 x 2,500 W @ 2 Ohms- Protection circuits: Shorts, open circuits, thermal issues- Cooling system: Variable speed with high-efficiency heat sinks and fans- Operation modes: Stereo, parallel, bridgeProduct Specifications Amplifier specifications Amplifier Class: HD Output power: 4 x 2500 W @ 2 ohm 4 x 2200 W @ 4 ohm 4 x 1400 W @ 8 ohm 2 x 5000 W @ 4 ohm (bridge) 2 x 4400 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 20000 Hz SNR Analog inputs (“A” weighted): >110 dB Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.05 % Input section Total number of inputs: 4 Balanced: 4 Mono: 4 Line inputs: 4 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Speakon Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Handles: Metal handles included in the front panel Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 483 mm / 19.02 inches Depth: 399 mm / 15.71 inches Weight: 14.2 kg / 31.31 lbs

Read more less

Unleash the power and precision of the Optimal Audio Amp 300 2x1350W @ 4Ω AB Performance Power Amplifier 2U in your audio setup. This robust amplifier is designed to drive Cuboid and Sub loudspeakers within the Optimal Audio ecosystem, offering uncompromising sound quality and performance. With a reliable Class A/B design delivering 1350 watts per channel into 4Ω, this amplifier ensures a clear and dynamic audio experience. Choose between Stereo, Bridge, or Parallel mode for versatile installation options tailored to your specific needs.Take control of your sound system with the Amp 300's seamless integration with the Zone processor, allowing you to maximise performance through the onboard WebApp. Configure amplifier settings effortlessly and access a variety of Optimal Audio loudspeaker presets and limiters for a customised sound experience. Equipped with flexible input connectors and front panel status monitoring, the Amp 300 combines functionality with ease of use, making it an essential component for your audio setup.Specifications:- Power: 1350 watts per channel into 4Ω- Operation Modes: Stereo, Bridge, Parallel- Design: Class A/B- Compatibility: Cuboid and Sub loudspeakers- Integration: Zone processor with WebApp control- Connectivity: Flexible input connectors- Monitoring: Front panel status monitoringProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Elevate your audio experience with the Optimal Audio Amp 200, a top-of-the-line performance power amplifier designed to provide unparalleled quality and performance. With a reliable Class A/B design, this amplifier delivers an impressive 700 watts per channel into 4Ω, ensuring crystal-clear sound quality and powerful performance. Whether you're setting up a stereo system, bridging multiple speakers, or running them in parallel, the Amp 200 offers versatile functionality with Stereo, Bridge, and Parallel modes to suit your specific needs. Crafted with a compact 2U design, this amplifier is not only powerful but also durable, making it ideal for various installation applications. The intuitive front panel design, complete with indicator LEDs for each amplifier channel, allows for easy monitoring and control. Enhance your audio setup with seamless connectivity through balanced XLR / 1/4” Jack 'Combi' line inputs and speakON® or binding post outputs. Combine the Amp 200 with a Zone processor for maximum performance and unlock a full suite of Optimal Audio loudspeaker presets, limiters, and more, easily configurable via Zone's onboard WebApp. Take your sound experience to new heights with the Optimal Audio Amp 200 and enjoy exceptional quality, flexibility, and performance in every note.Specifications:- Power Output: 700 watts per channel into 4Ω- Design: Class A/B- Modes: Stereo, Bridge, Parallel- Connectivity: XLR / 1/4” Jack 'Combi' line inputs, speakON® or binding post outputs- Compatibility: Zone processor integrationProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Introducing the Optimal Audio Amp 100 2x350W @ 4Ω AB Performance Power Amplifier 2U, a powerhouse of performance and reliability designed to elevate your sound system to professional levels. This Class A/B amplifier delivers 350 watts per channel into 4Ω, ensuring a crisp and powerful audio experience that envelops you in exceptional sound quality. The Amp 100 features a versatile design with Stereo, Bridge, and Parallel modes, providing flexibility for various installation applications. Seamlessly tailor your audio setup with a switch on the rear panel and experience the freedom to control your sound environment.Elevate your audio system by combining the Amp 100 with a Zone processor, unlocking access to a range of Optimal Audio loudspeaker presets, limiters, and more. Easily configure these settings through Zone's onboard WebApp, enhancing the versatility and control over your sound output. The Amp 100 boasts a compact and rugged 2U design, with a user-friendly front panel that includes indicator LEDs for monitoring each amplifier channel. Connect effortlessly with balanced XLR / 1/4" Jack 'Combi' line input connectors and Speakon / binding post outputs, ensuring seamless connectivity for professional audio installations.Unleash the full potential of your sound system with the Optimal Audio Amp 100, and immerse yourself in a world of superior audio quality and performance. Perfect for anything from small venue setups to large events, this amplifier offers the reliability and power you need to take your sound to the next level.Key Specifications:- Power Output: 350 watts per channel into 4Ω- Connectivity: Balanced XLR / 1/4" Jack 'Combi' line input connectors, Speakon / binding post outputsProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 350W / 8Ω: 250W / 8Ω Bridged: 700W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 102dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

- Drive both conventional low impedance and 70V-100V loudspeaker loads- Internal DSP presets for Optimal Audio loudspeakers- Energy Star Compliant with Power Factor Correction technologyImmerse yourself in unparalleled audio performance with the Optimal Audio SmartAmp 30 4x250W Amplifier with Integral DSP 100V 1U. This powerhouse amplifier is designed to elevate the sound quality of Optimal Audio loudspeakers to new heights. Here's why you need to add this cutting-edge amplifier to your audio setup:1. Tailored Sound Experience: With internal DSP presets specifically crafted for Optimal Audio loudspeakers, the SmartAmp 30 ensures that you experience audio exactly as the creators intended. Enjoy optimised EQ settings and overload protection for a superior listening experience.2. Versatile Compatibility: Whether you're looking to power low impedance or 70V-100V line loudspeaker loads, the SmartAmp 30 has you covered. Its four channels deliver a maximum of 250W per channel, allowing you to create a customised speaker system tailored to your space and preferences.3. Energy Efficient Performance: Say goodbye to market-specific power regulation concerns with the SmartAmp 30's Power Factor Correction technology. This Energy Star Compliant amplifier offers universal AC mains operation and ultra-low standby power consumption, ensuring consistent and reliable power delivery wherever you are.Upgrade your audio setup with the Optimal Audio SmartAmp 30 4x250W Amplifier and immerse yourself in a world of crystal-clear sound and unparalleled performance. Elevate your listening experience to new heights with the perfect combination of power, precision, and efficiency.Product Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 250W 70V-100V OUTPUT: 4 x 250W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 300W HEAT GENERATED: 1080 kJ per hour DIMENSIONS: (W) 440mm x (H) 44mm x (D) 308mm (W) 17.32” x (H) 1.73” x (D) 12.13” WEIGHT: 3.6kg (7.9lbs)

Read more less

Immerse yourself in the world of unparalleled audio quality with the Optimal Audio SmartAmp 20 4x125W Amplifier with Integral DSP. This powerhouse of an amplifier is meticulously crafted to drive Optimal Audio loudspeakers to their full potential, offering a versatile power output and power-sharing technology. Elevate your listening experience to new heights with built-in Digital Signal Processing (DSP) tailored to enhance the performance of Optimal Audio loudspeakers. The SmartAmp 20 provides signal processing presets specifically designed for Optimal Audio loudspeakers, ensuring the perfect sound balance effortlessly. The sleek half-width, 1U, 19” rack housing allows for space-efficient mounting of multiple units, providing up to 8 channels in a single 1U space. Enjoy the convenience of internal DSP presets selected via switches at the rear of the amplifier, enabling the ideal EQ and overload protection settings for your speakers. With Power Factor Correction power supply technology, the SmartAmp 20 ensures consistent, regulated power delivery worldwide, offering ultra-low standby power consumption for energy efficiency. Transform your audio setup with the Optimal Audio SmartAmp 20, where cutting-edge technology meets exceptional sound quality.Specifications:- Amplifier Type: 4-channel- Power Output: 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads- Maximum Output: 250W- Half-width, 1U, 19” rack housing- Power Factor Correction power supply technology- Internal DSP presets selected via switchesProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 125W 70V-100V OUTPUT: 4 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 150W HEAT GENERATED: 540 kJ per hour DIMENSIONS (W) 220mm x (H) 44mm x (D) 353mm (W) 8.67” x (H) 1.73” x (D) 13.90” WEIGHT: 2.4kg (5.3lbs)

Read more less

Experience cutting-edge audio performance with the Optimal Audio SmartAmp 10 2x125W Amplifier with Integral DSP 100V Half-Rack 1U. This powerful amplifier is meticulously designed to enhance your sound system to exceptional levels. The 2 x 125W power output effortlessly drives both low impedance and 70V-100V line loudspeaker loads, delivering outstanding sound quality and clarity. Its built-in Digital Signal Processing (DSP) features tailored presets for Optimal Audio loudspeakers, ensuring optimal performance with a simple switch setting. Equipped with power sharing technology, the SmartAmp 10 can deliver up to 250W from a single channel, providing flexible power distribution according to your system requirements. The half-width, 1U design allows for convenient desktop or rack mounting, while the universal mains operation and Power Factor Correction power supply technology ensure consistent power regulation globally. Energy Star compliant for efficiency, the SmartAmp 10 offers unparalleled audio performance, flexibility, and efficiency in one sleek package.Specifications:- Power Output: 2 x 125W- Loudspeaker Load Compatibility: Low impedance and 70V-100V line- Digital Signal Processing (DSP): Yes- Power Sharing Technology: Yes- Design: Half-width, 1U- Power Supply: Universal mains operation with Power Factor Correction- Energy Efficiency: Energy Star compliantProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 2 x 125W 70V-100V OUTPUT: 2 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 2 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 75W HEAT GENERATED: 270 kJ per hour DIMENSIONS: (W) 220mm x (H) 43.9mm x (D) 277mm (W) 8.67” x (H) 1.73” x (D) 10.91” WEIGHT: 1.9kg (4.2lbs)

Read more less

Elevate your audio experience to new heights with the NEXO DTDAMP4X1.3C 4Ch Power Amp. Designed as the optimal companion for NEXO speakers backed by the DTD Controller, this power amplifier delivers a robust and crystal-clear sound performance. Featuring 4 channels capable of providing 4x1250W at 4Ω, this amplifier ensures a powerful audio output for your setup. The NEXO DTDAMP4X1.3C offers versatile bridging options allowing channels to be independently bridged two by two, providing flexibility in configuring your audio system. It boasts an ultra-efficient Switch Mode power supply and amplifier channel design for superior performance. The extensive protection features safeguard your equipment against mains over/undervoltage, temperature fluctuations, and DC outputs, ensuring the longevity and safety of your audio system. Ideal for powering mobile setups or fixed installations of NEXO ID and PS Series systems, the NEXO DTDAMP4X1.3C is available in two models: one delivering 4 x 700 Watts and another providing 4 x 1300 Watts at 4 Ohms. Specifications:- Channels: 4- Power Output: 4x1250W @ 4Ω- Bridging Options: Independent bridging two by two- Protection Features: Comprehensive protection against mains over/undervoltage, temperature fluctuations, and DC outputs- Power Supply: Switch Mode- Amplifier Channel Design: High-efficiency designProduct Specifications Power Number of channels:4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 135 Volts Max. output power (4 x 8 Ohms): 4 x 750 Watts Max. output power (4 x 4 Ohms): 4 x 1300 Watts Max. output power (2 bridge x 8 Ohms): 2 x 2600 Watts Audio Characteristics Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +8 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Back Panel Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Front Panel Features Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains Requirements Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 900 Watts Power consumption 1/4 max. / 4 Ohms: 1800 Watts Physical Specifications Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Operating temperature range: 0°C - 45 °C Certifications CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC Ordering Information Pre-configured for 230 volts mains: DTDAMP4x1.3C Pre-configured for 120 volts mains: DTDAMP4x1.3U

Read more less

Elevate your audio setup to new heights with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier. Tailored as the ultimate companion for NEXO speakers with DTD Controller support, this 4-channel amplifier is a game-changer for professional audio environments. Boasting a high-efficiency Switch Mode power supply and Amplifier channel design, the DTDAMP4X0.7C ensures unmatched sound quality and reliability for your performances. With comprehensive protection features such as mains over/undervoltage, temperature monitoring, and DC outputs protection, this amplifier offers peace of mind during every use. Despite its powerful capabilities, this lightweight and compact 1U rack unit weighing only 7.5 Kg is perfect for mobile setups. The variable-speed cooling system guarantees quiet operation while enhancing performance. Simplify your setup, unleash your NEXO speakers' full potential, and experience a new level of audio precision with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier.Specifications:- Power: 4x700W @ 4Ω- Weight: 7.5 Kg- Size: 1U RackProduct Specifications General Number of channels: 4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 85 Volts Max. output power (4 x 8 Ohms): 4 x 360 Watts Max. output power (4 x 4 Ohms): 4 x 700 Watts Max. output power (2 bridge x 8 Ohms): 2 x 1400 watts Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +5 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 580 Watts Power consumption 1/4 max. / 4 Ohms: 1100 Watts Physical Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Other Operating temperature range: 0°C - 45 °C CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC

Read more less

Experience unparalleled sound quality with the NEXO NXAMP4X4C MK2 4Ch Power Amp and Controller. Developed through the exceptional collaboration between NEXO and Yamaha, this state-of-the-art device brings a revolution in audio performance. Delivering a robust 4 x 4500 Watts output, this 4U unit features advanced signal processing and ultra-low distortion Class D amplifiers, ensuring an exceptional auditory experience. The large colour touchscreen on the front panel provides easy access to all essential parameters, making setup effortless. Whether for fixed installations or touring, this powered controller offers flexibility, convenience, efficiency. Elevate your sound system to new heights with the NEXO NXAMP4X4C MK2, providing remarkable clarity and detail in sound reproduction. With 24-bit/96KHz converters and 64-bit signal processing, enjoy articulate and rich performance from solid bass to impressive high-end definition. Even at low volumes, the sound remains transparent and pure, enhancing the audience experience. Specifications:- Power output: 4 x 4500 Watts- Signal Processing: 64-bit- Converters: 24-bit/96KHz- Amplifier Type: Class D- Touchscreen: Large Colour Touchscreen- Unit Size: 4UProduct Specifications Power Specifications Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 180 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 3300 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 4500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 6600 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 9000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 18 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Latency: 580 us on a flat setup Audio AD and DA converters: 24-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs

Read more less

Experience the pinnacle of sound quality with the NEXO NXAMP4X2MK2 4Ch Power Amp Controller. This powerhouse of a power amp controller is a collaborative creation between NEXO and Yamaha, designed to ensure top-notch sound quality for NEXO loudspeaker systems. Boasting cutting-edge technology, this controller features 4 ultra-low distortion Class D amplifiers, each delivering a whopping 2500 Watts of power, setting a new standard in sound reinforcement.The user-friendly interface of the NEXO NXAMP4X2MK2, with all essential parameters easily accessible via a large colour touchscreen on the front panel, provides a seamless setup experience for both fixed installations and touring. Elevate your sound system with this power amp controller and immerse your audience in a whole new level of audio excellence.Key Specifications:- Brand: NEXO- Power: 4x2500W- Amplifier Type: Class D- Interface: Colour touchscreen- Application: Fixed installations, touringProduct Specifications Power Specifications: Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 140 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1200 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 2500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 3800 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 5000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 16 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Lantency: 550 us on a flat setup Audio AD and DA converters: 32-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs Back Panel features: Analogue audio inputs: 4x balanced analogue inputs on XLR3 Power outputs: 4×Neutrik Speakon NL-4 outputs RS232 port: 1×DB-9 connector dedicated for DPU connection GPIO port: 1ｘDB-25 connector with 5x Inputs and 8x Outputs for DMU connection Expansion slot: For networking and digital audio cards, 4x digital audio inputs and remote control Main sockets: 1x Neutrik Powercon NAC3 (1x 20 A) User interface and controls: Front panel buttons and knobs: Rotary encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGZ, 480 x 272 Main requirements: Mains voltage: Universal power supply with active PFC 100-240 Volts (50/60 Hz) Mains voltage: Power consumption（1/4 max 2 Ω）: 3500 W Dimensions and Certifications: Dimensions: 2U 19" rack, 502mm / 20" depth, 16.1 kg / 35.3 lbs weight Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Elevate your audio experience with the NEXO NXAMP4X1MK2 4Ch Power Amp Controller 4x1300W 2U. This powerhouse amplifier boasts cutting-edge features that deliver unparalleled sound quality and precise control. The advanced Array-EQ User EQ allows for up to 8 bands per channel, ensuring a tailored sound experience with every note heard exactly as intended. Equipped with ultra-low distortion Class D amplifiers and 32-bit/96KHz converters, this amplifier produces crystal-clear sound reproduction with solid bass and impressive high-end definition. With two layers of mute options, Voltage and Protection Meters, and seamless integration with three new multi-core DSPs, fine-tuning your audio setup has never been easier. Future-proofed hardware ensures potential firmware updates and continuous relevance over the years. Take your sound system to the next level with the NEXO NXAMP4X1MK2 Power Amp Controller.Specifications:- Power: 4x1300W- Amplifier Type: Class D- Number of Channels: 4- EQ Bands per Channel: Up to 8- Converters: 32-bit/96KHz- Signal Processing: 64-bit- Interface: Remote Control- Connectivity: Versatile OptionsProduct Specifications Power Specifications Number of amplifiers channels: 4 x amplifiers channels, 2 by 2 bridgeable Max. output voltage (no load): 4 x 105 Volts 4 x 140 Volts Max. output power (4 channels mode/8 Ohms load per channel): 4 x 600 Watts 4 x 1200 Watts Max. output power (4 channels mode/4 Ohms load per channel): 4 x 900 Watts 4 x 1900 Watts Max. output power (4 channels mode/2 Ohms load per channel): 4 x 1300 Watts 4 x 2500 Watts Max. output power (2 channels mode/8 Ohms load per channel): 2 x 1800 Watts 2 x 3800 Watts Max. output power (2 channels mode/4 Ohms load per channel): 2 x 2600 Watts 2 x 5000 Watts Power consumption (Standby): 10 Watts Power consumption (Idle): 200 Watts Input to Power Out Frequency response: +/-0.5 dB from 10 Hz to 20 KHz Input Impedance / Max. level: 22 K Ω / +25 dBu Dynamic Range / TDH + N: 107 dB unweighted / Typical 0.1% on a flat setup Latency: 550 us on a flat setup Audio AD and DA Converters: 32 bits @ 96 KHz Processing: 3 x multicore 64 bits processing DSPs Back Panel Features Analogue audio inputs: 4 x balanced analogue inputs on XLR3 Power outputs: 4 x Neutrik Speakon NL-4 outputs RS232 port: 1 x DB-9 connector dedicated for DPU connection GPIO port: 1 x DB-25 connector with 5 x inputs and 8 x outputs or for DMU connection Expansion slot: For networking and digital audio cards, 4 x digital audio inputs and remote control Mains sockets: 1 x Neutrik Powercon NAC3 (1 x 20 A) User Interface And Controls Front panel buttons and knobs: Rotary Encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGA, 480 x 272 Mains Requirements Mains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50/60/Hz) Power consumption 1/4 max. 2 Ohms: 1900 Watts 3500 Watts Physical & Dimensions Height: 2U 19" Rack Depth: 506 mm Weight: 15.7 Kg Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Elevate your audio experience to new heights with the Martin Audio VIA5002 2 Channel Class D Power Amplifier. Designed for professional audio setups, this advanced amplifier embodies the perfect blend of power and efficiency. Ideal for live events, venues, and portable sound systems, the VIA5002 boasts a total power output of 5000 Watts, making it the ultimate choice for powering subwoofers and delivering exceptional sound quality.With 2 x 2500W into 4 ohms, this power amplifier ensures a seamless audio performance. The VIA5002 is not only powerful but also energy-efficient, thanks to its high efficiency design that minimizes energy consumption. Its lightweight and compact 2U rack height construction make it a breeze to transport and install, perfect for on-the-go sound setups. The comprehensive protection systems, including signal and clip limiter LEDs, guarantee safe operation and full output capability even in challenging environments with temperatures up to 40°C.Experience crystal-clear sound and reliable performance with the Martin Audio VIA5002. Key specifications:- Total Power Output: 5000 Watts- Power Output: 2 x 2500W @ 4 ohms- Rack Height: 2U- Temperature Resistance: up to 40°CProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT: 2 x 2500W into 4 ohms 2 x 1600W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience with the Martin Audio VIA5004 4 Channel Class D Power Amplifier. This powerful amplifier is designed to deliver unparalleled power and performance for small to medium-scale installations and portable sound applications. With four channels of efficient Class D amplification, this advanced amplifier offers a total power output of 5000 Watts, ensuring exceptional sound quality in demanding environments. The VIA5004 can deliver 4 x 1250 watts into 2 ohms and 2 x 2500 watts into 4 ohms bridged, making it versatile and ideal for a wide range of audio applications.Equipped with comprehensive protection functions, such as signal and clip limiter LEDs, the Martin Audio VIA5004 ensures safe operation and full output capability even in ambient temperatures up to 40°C. The switch mode power supply and variable speed cooling fan with front-to-back airflow provide efficient cooling and reliable performance. Global mains operation allows seamless compatibility with different power supplies, offering flexibility for various setups.Upgrade your sound system with the Martin Audio VIA5004 and enjoy exceptional audio performance, reliability, and ease of use. Whether for installations or portable applications, this 2U rack space amplifier is a must-have for anyone looking to enhance their audio setup.Specifications:- Channels: 4- Power Output: 5000 Watts total- Power Output per Channel: 4 x 1250 watts @ 2 ohms- Bridge Power Output: 2 x 2500 watts @ 4 ohms- Protection Functions: Signal and clip limiter LEDs- Cooling System: Variable speed cooling fan with front-to-back airflow- Temperature Range: Up to 40°C- Operation: Global mains operationProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 1250W into 2 ohms 4 x 800W into 4 ohms 4 x 450W into 8 ohms 2 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience to new heights with the Martin Audio VIA2502 2 Channel Class D Power Amplifier. This cutting-edge amplifier delivers a total power output of 2500 Watts, with two channels of efficient Class D amplification providing 2x1250 watts into 2 ohms. Whether you are a professional sound engineer or a music enthusiast, the Martin Audio VIA2502 is the ideal choice for powering BlacklineX, CDD, and V.Series systems in various installations and portable sound applications. Designed to meet the demands of challenging environments, this amplifier combines exceptional lightweight and compact 2U rack height design with a range of advanced features. The comprehensive protection systems ensure safe operating conditions, while the variable speed cooling fan and front-to-back airflow keep the amplifier cool even under pressure. Invest in the Martin Audio VIA2502 and enjoy unparalleled audio performance with ease.Specifications:- Power Output: 2x1250W @ 2Ω- Class: Class D- Total Power Output: 2500 Watts- Rack Height: 2UProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT 2 x 1250W into 2 ohms 2 x 800W into 4 ohms 2 x 450W into 8 ohms 1 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10kΩ Balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: High current, high frequency switch-mode AC OPERATING RANGE 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less

Elevate your sound experience with the Martin Audio VIA2004 4 Channel Class D Power Amplifier. Delivering a total power output of 2000 Watts across four channels, this advanced amplifier is designed to take your audio to new heights. Ideal for venues such as bars, auditoriums, and HoW, the VIA2004 is the perfect choice for small to medium-scale sound reinforcement and club use. Benefit from its efficient Class D amplification technology, which not only reduces energy consumption but also ensures the power reserves needed for exceptional sound quality. The lightweight and compact 2U rack height design makes it versatile for fixed installations or portable applications. Trust in the VIA2004's comprehensive protection functions to maintain safe operating conditions and deliver consistent audio performance. With a variable speed cooling fan and front-to-back airflow, temperature regulation is optimal even in ambient temperatures up to 40°C. Pair the VIA2004 with the Martin Audio DX0.5 or DX4.0 system processor for seamless integration and control under VU-NET. Take advantage of cost-effective scalability and resolution with this powerful amplifier from Martin Audio.Specifications:- Channels: 4- Power Output: 500W per channel @ 4Ω- Total Power Output: 2000 Watts- Rack Height: 2UProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 500W into 4 ohms 4 x 250W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 5 kΩ typical, balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 FREQUENCY RESPONSE: 20Hz - 20kHz +/- 0.45dB, 4 ohm load TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz MAINS CONNECTOR: 1 x Neutrik Powercon™ TOTAL SYSTEM EFFICIENCY: 89% (4 x 250W into 8 ohms) Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less

- Four channels of efficient Class D amplification- High power density in 2U rack height- Advanced DSP and network control for superb audio performanceExperience unparalleled power and performance with the Martin Audio iKon iK42 4 Channel Class D Amplifier. This advanced amplifier is a game-changer in the world of audio equipment, offering a combination of high power density, state-of-the-art DSP, and network control capabilities.With four channels of efficient Class D amplification, the iK42 delivers up to 3000W per channel @ 4Ω, making it ideal for a wide range of audio setups. Its compact 2U rack height design ensures high power density without taking up too much space in your setup.The iK42 is not just about power - it's about precision and control. The high-performance 96kHz DSP on all inputs and outputs, along with up to 1000 FIR filter taps @ 48kHz on each output channel, ensures maximum performance and compatibility with Martin Audio Wavefront Precision line arrays and XE Series stage monitors.Whether you're looking to amplify a Martin Audio loudspeaker range or provide multi-channel amplification for live events, the iKon iK42 is the ultimate choice. With Ethernet for remote control and monitoring, as well as a user-friendly front panel interface, this amplifier offers the perfect blend of power, control, and flexibility. Elevate your audio experience with the Martin Audio iKon iK42 4 Channel Class D Amplifier.Product Specifications GENERAL TYPE: Four-channel Class D amplifier POWER OUTPUT (*): 5000W into 2Ω 3000W into 4Ω 1500W into 8Ω 10000W bridged per channel pair, 4Ω CV LINE OUTPUT (*): 1250W, 25V line 3500W, 70V line 5000W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Elevate your audio setup to unparalleled levels with the Martin Audio iKon iK81 8 Channel Class D Amplifier. This advanced amplifier features eight channels of efficient Class D amplification, delivering a total power output of 10,000 Watts in a compact 2U rack height. Perfect for powering Martin Audio Wavefront Precision WPM line arrays and multi-channel setups across the Martin Audio loudspeaker range, the iK81 ensures exceptional audio performance. Equipped with a sophisticated 96kHz DSP on all inputs and outputs, the amplifier guarantees pristine sound quality with up to 1000 FIR filter taps at 48kHz on each output channel. The high efficiency of this amplifier not only reduces energy consumption but also maintains the necessary power reserves for outstanding sound reproduction in challenging live environments. With Ethernet connectivity for system remote control and monitoring via Martin Audio's VU-NET software, this amplifier offers top-tier performance and reliability. Immerse yourself in a world of precision, power, and cutting-edge technology with the Martin Audio iKon iK81.Specifications:- Power Output: 1250W per channel into 2, 4, or 8 ohms with all channels driven- Rack Height: 2U- DSP: 96kHz DSP on all inputs and outputs, up to 1000 FIR filter taps at 48kHz on each output channel- Connectivity: Ethernet for system remote control and monitoringProduct Specifications GENERAL TYPE: Eight-channel Class D amplifier POWER OUTPUT (*): 1250W into 2Ω 1250W into 4Ω 1250W into 8Ω 2500W bridged per channel pair, 4Ω or 8Ω CV LINE OUTPUT (*): 625W, 25V line 1250W, 70V line 1250W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Step into the realm of professional audio excellence with the Lab Gruppen IPX 2400 2-Channel Compact Power Amplifier with DSP 2x1200W. This powerhouse amplifier, designed for touring applications, offers a compact yet formidable solution for your sound reinforcement needs. Delivering a total output of 2,400 Watts across 2 channels, the IPX 2400 guarantees unparalleled performance in a single rack space. Harness the highly advanced DSP of this amplifier with 40 real-time multi-slope Parametric EQ's and 100 user presets, granting you the flexibility to fine-tune your sound system to perfection. The networked control via touchscreen user interface adds a modern touch, enabling intuitive operation and seamless integration into your setup. Prioritising efficiency and protection, the IPX 2400 features Speaker Protect Limiter for loudspeaker system safety and low mains current draw with IDEEA technology for power conservation without sacrificing performance. Whether you're establishing a permanent installation, portable corporate AV system, or live PA setup, the Lab Gruppen IPX 2400 stands as the ultimate choice for those seeking top-tier audio amplification. Elevate your sound experience with the IPX 2400 – where power meets precision.Specifications:- Total Output: 2,400 Watts- Channels: 2- DSP: Advanced with 40 real-time multi-slope Parametric EQ's- User Presets: 100- Interface: Touchscreen user interface- Speaker Protect Limiter: Yes- Power Draw Technology: IDEEAProduct Specifications Maximum Output Power 2 Ω per channel, stereo: 800 W 4 Ω per channel, stereo: 1200 W 8 Ω per channel, stereo: 600 W Controls Front: Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel) System Number of channels: 2 Output voltage: 100 V peak / 70 Vrms / 39.2 dBu Input sensitivity for maximum output voltage: 6 dBu Output current: 20 Arms Output circuit type: Class-D THD+N < 0.1%, 20 Hz - 20 kHz @ 1 W < 0.05% @ 1 kHz, 1 dB below clip Output noise: -65 dBu, A-weighted Signal-to-noise: > 104 dB Channel crosstalk: > 80dB @ 1 kHz Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 dB Common mode rejection (CMR): > 50 dB Gain (all DSP controls set to 0 dB): 33 dB Indicators Power: Red LED Limit, per channel: Red LED Signal / mute, per channel: Green/Red LED

Read more less

Elevate your audio experience with the Lab Gruppen IPX 1200 2-Channel Compact Power Amplifier with DSP 2x600W. Designed for touring applications, this powerhouse amplifier offers a compact yet robust solution for various audio needs. With a high power density and competitive cost, the IPX 1200 delivers 2 x 600W at 4 ohms, ensuring reliable power and performance in a single rack space.Experience unparalleled audio control with the highly advanced DSP featuring 40 real-time multi-slope Parametric EQ's. Customise your sound with adjustable gain, input, and output delay, as well as high- and low-pass filters adjustable to any frequency. The innovative software-controlled Speaker Protect Limiter provides extensive protection for your loudspeaker system, ensuring peace of mind during performances.Take command of your audio setup with networked control via the touchscreen user interface. Access all setup parameters, input mixing, DSP features, and limiter settings with ease. With 100 user-defined presets available for system configuration and setup, the IPX 1200 offers unparalleled flexibility and convenience.Key Specifications:- Wattage: 2 x 600W- Number of Channels: 2- DSP Control: Yes- Parametric EQ's: 40 real-time multi-slope- Input/Output: Adjustable gain, delay, high- and low-pass filters- Speaker Protect Limiter: Yes- User-defined Presets: 100- Connectivity: Networked control via touchscreen user interfaceProduct Specifications Maximum Output Power 2 Ω per channel, stereo: 500 W 4 Ω per channel, stereo: 600 W 8 Ω per channel, stereo: 300 W Controls Front: Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel) System Number of channels: 2 Output voltage: 70 V peak / 50 Vrms / 36.2 dBu Input sensitivity for maximum output voltage: 6 dBu Output current: 16 Arms Output circuit type: Class-D THD+N: < 0.1%, 20 Hz - 20 kHz @ 1 W < 0.05% @ 1 kHz, 1 dB below clip Output noise: -66 dBu, A-weighted Signal-to-noise: > 102 dB Channel crosstalk: > 80dB @ 1 kHz Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 d Common mode rejection (CMR): > 50 dB Gain (all DSP controls set to 0 dB): 30 dB Indicators Power: Red LED Limit, per channel: Red LED Signal / mute, per channel: Green/Red LED

Read more less

Elevate your sound system to new heights with the Lab Gruppen E10:4 Energy Efficient Class-D Amplifier. This powerhouse boasts a 1,000W amplifier with 4 flexible output channels in a compact 1U rack unit, delivering unparalleled performance and efficiency. The ultra-compact size saves valuable rack space while ensuring optimal power without compromise. With IntelliDrive Energy Efficient Amplifier technology (IDEEA) and Rail Sensing Limiter (RSL), experience crystal-clear sound, minimal distortion, and reduced signal clipping. The IDEEA technology maximises power levels with minimal mains current draw, offering a smart and energy-efficient solution for any installation. The RSL feature optimises each output channel for high-quality audio output under all load conditions. With the Lab Gruppen E10:4, enjoy a premium audio experience with smart green credentials and a low lifetime cost of ownership.Specifications:- Power: 1,000W- Output Channels: 4x250W- Size: 19" 1U- Technology: IntelliDrive Energy Efficient Amplifier (IDEEA), Rail Sensing Limiter (RSL)Product Specifications General Number of amplifier channels: 4 Total output all channels driven: 1000 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 14 Arms Max output power (all channels driven) 2 ohms: N.R. 4 ohms: 250 W 8 ohms: 250 W 16 ohms: 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W) 70 V: 250 W 100 V: Can deliver 250 W to a 100 V load tapped at 500 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: > 70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 63.2 V Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 3 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 31.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Switches Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Two fans, front-rear airflow, temperature controlled speed Power Nominal voltage: 100 - 240 VAC Operating voltage: 85 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”) Weight Weight: 6.2 kg (13.7 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, ANSI/UL 60065 (ETL), CSA, CCC, PSE, Energy Star

Read more less

Experience unparalleled efficiency and performance with the Lab Gruppen E12:2 Energy Efficient Class-D Amplifier. This powerful 1,200W amplifier, in a compact 19" 1U design, delivers exceptional audio quality while conserving valuable rack space. Energy Star 2.1 compliant, this amplifier boasts supreme green credentials and remarkably low lifetime running costs, making it the environmentally conscious choice for any audio setup. The innovative IntelliDrive technology allows customisation of the output channels, delivering 2 x 600W at either constant voltage 70V or low impedance (2, 4, and 8 Ohms) as required. With comprehensive circuit protection, fault indication, and efficient cooling, the Lab Gruppen E12:2 ensures rock-solid durability and reliability for your audio needs. Elevate your sound experience with cutting-edge technology and exceptional performance.Specifications:- Power output: 2 x 600W- Rack Size: 19" 1U- Energy Star 2.1 compliant- Output Channels: 2- Amplifier Class: Class-D- Customisable Output: Constant voltage 70V or low impedance (2, 4, and 8 Ohms)- Circuit Protection: Comprehensive- Cooling: EfficientProduct Specifications General Number of amplifier channels: 2 Max total output all channels driven: 1200 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 18 Arms Max output power (all channels driven) 2 ohms: 600 W 4 ohms: 600 W 8 ohms: 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W) 16 ohms: 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W) 70 V: 600 W 100 V: Can deliver 600 W to a 100 V load tapped at 1200 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 69.3 V Sensitivity for stated power into 4 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 2 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 8 Ohm in 70 V mode: 3.8 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 4 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 32 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

- Energy efficient Class-D amplifier with 2x200W output channels- Certified Energy Star 2.1 compliant for supreme green credentials- Compact size and high operating efficiency for cost-effective installation solutionsExperience the pinnacle of energy efficiency and sonic excellence with the Lab Gruppen E4:2 Energy Efficient Class-D Amplifier. This amplifier boasts a powerful 400W output spread across 2 flexible channels, all housed in a sleek 19" 1U rack unit. With Energy Star 2.1 certification, this amplifier guarantees exceptionally low lifetime running costs while reducing your carbon footprint. The E4:2 features Lab Gruppen's innovative IDEEA technology, delivering high power levels with minimal distortion and power consumption. Its Rail Sensing Limiter (RSL™) ensures top-notch audio quality by reducing signal clipping, while allowing for user configuration between Hi-Z and Lo-Z outputs. This flexibility extends to asymmetric loading of channels, optimising performance and efficiency. Ideal for installations where space and cost are crucial factors, the Lab Gruppen E4:2 Energy Efficient Class-D Amplifier is the perfect choice for those seeking a balance between performance, energy efficiency, and cost-effectiveness. Elevate your audio setup with the E4:2 and enjoy premium sound quality while saving on operating costs in the long run.Product Specifications General Number of amplifier channels: 2 Max total output all channels driven: 400 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 11 Arms Max output power (all channels driven) 2 ohms: 200 W 4 ohms: 200 W 8 ohms: 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W) 16 ohms: 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W) 70 V: 200 W 100 V: Can deliver 200 W to a 100 V load tapped at 400 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 40 V Sensitivity for stated power into 4 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 2 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 8 Ohm in 70 V mode: -0.9 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 2.1 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 27.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output: Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

Elevate your audio experience with the Lab Gruppen E2:2 Energy Efficient Class-D Amplifier. This cutting-edge amplifier is more than just a sound powerhouse; it is a game-changer in the realm of audio technology. Boasting Energy Star certification, the Lab Gruppen E2:2 sets the standard for green credentials, ensuring not only exceptional performance but also a sustainable choice for sound aficionados. Its versatile IntelliDrive technology allows for delivering 2 x 100W at a constant voltage of 70V or across low impedance ranges of 2, 4, and 8 Ohms, providing unparalleled flexibility in sound system configurations. The amplifier's fail-safe circuit protection guarantees reliable performance and durability, offering peace of mind while enjoying top-notch audio quality. Key Specifications:- Power Output: 2x100W- Amp Class: Class-D- Voltage Output: 70V- Impedance Compatibility: 2, 4, and 8 Ohms- Dimensions: 19" x 1UProduct Specifications General Number of amplifier channels: 2 Total output all channels driven: 200 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 7.7 Arms Max output power (all channels driven) 2 ohms: N.R. 4 ohms: 100 W 8 ohms: 100 W 16 ohms: 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W) 70 V: 100 W 100 V: Can deliver 100 W to a 100 V load tapped at 200 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 40 V Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: -0.9 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 27.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

Discover unmatched audio performance and energy efficiency with the Lab Gruppen CA2401 Commercial Amplifier. This 240 Watt powerhouse is expertly designed to cater to the demands of commercial and industrial settings, providing exceptional sound quality across a variety of speaker configurations. Whether you require a background music system for a retail space or a public address system for a corporate environment, the Lab Gruppen CA2401 is the perfect solution for your audio needs. Crafted with Energy Star certified design, this amplifier not only delivers impressive sound but also contributes to energy conservation, reducing operational costs and making it an environmentally sustainable choice for businesses. Its direct drive, constant power technology ensures consistent performance and reliability, while the GPI remote volume control and individual front panel controls allow for convenient adjustments according to your preferences. Versatile and easy to install, the Lab Gruppen CA2401 is ideal for a range of venues, from bars and restaurants to hotels and educational institutions. Its sleek 1U rack-mountable design, complete with joining brackets for various mounting options, adds practicality to its exceptional functionality. Elevate your audio experience and save on energy costs with the Lab Gruppen CA2401 Commercial Amplifier.- Power: 240 Watts- Loudspeaker Configurations: Low-Z (4/8 Ohm) and High-Z (70/100 V)- Energy Star Certified- Direct Drive, Constant Power Technology- GPI Remote Volume ControlProduct Specifications Maximum Output Power 4 Ω per channel: 240 W 8 Ω per channel: 240 W 70 V per channel: 240 W 100 V per channel: 240 W Number of Output Channels Number: 1 Minimum Load Impedance 4 Ω mode: 4 Ω 8 Ω mode: 8 Ω 70 V output mode: 20 Ω 100 V output mode: 41 Ω Controls Front: Power standby button, gain control, tone controls - bass and treble Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter Tone Controls Bass: ±10 dB @ 100 Hz Treble: ±10 dB @ 10 kHz Indicators Power: On (blue), force standby (red), sleep (yellow) Master Signal (green LED): >12.3 mV (-36 dBu) Limit (red LED): Input clip, output limit Fault (red LED): Overheat, DC fault, over current, etc System Inputs: 1 x 3-pin 5.08 mm Euroblock connector 1 x RCA stereo summed Input impedance: 10 kΩ unbalanced and RCA, 20 kΩ balanced Input sensitive: Balanced: 1.23 V (+4 dBu) RCA: 0.62 V (-2 dBu) each for mono sum RCA Maximum input level: 9.75 V (+22 dBu) Outputs: 1 x 2-pin 5.08 mm Euroblock connector Output circuit type: Class D Remote connector: 1 x RJ45 connector Performance Distortion, 1/8 rated power: <0.05% Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB Crosstalk (2 channel models): >85 dB Signal-to-noise: >97 dBA High-pass filter: 80 Hz HPF Circuit Protection Cooling: Convection-cooled, fanless Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection Load protection: Controlled start and shutdown behaviour, DC-fault protection Power Supply, Voltage (Fuse) Main voltage: 100-240 V~, 50/60 Hz with active power factor correction Fuse: T 6.3 A L 250 V Power consumption 1/8th rated power @ 4 Ω: 70 W Mains connector: Standard IEC connector Physical and Dimensions Dimensions (H x W x D): 44 x 218 x 299 mm (1.7 x 8.6 x 11.8") Weight: 2.4 kg (5.3 lbs) Finish: Brushed black anodized aluminium chassis with black painted steel bottom Approvals: CE, cTUVus, PSE, CCC, RoHS, FCC part 15 Class B and Energy Star 3.0

Read more less

Experience unmatched sound quality and performance with the Gemini XGA-5000 2-Channel Power Amplifier. This powerful amplifier delivers a crystal-clear sound output of 2 x 300W @ 4Ω, making it perfect for professional sound systems. Boasting a durable construction, this amplifier ensures consistent, reliable performance night after night. The efficient cooling technology incorporated in its design reduces maintenance needs, making it an ideal choice for professional sound system applications. With features like XLR and 1/4" balanced inputs, Stereo and Mono Bridge modes, and comprehensive front panel indicators, the Gemini XGA-5000 offers exceptional amplification performance at a remarkable value. Elevate your sound system with the Gemini XGA-5000 and enjoy the perfect blend of exceptional sound quality and power for all your events.Key Features:- Brand: Gemini- Channels: 2- Power Output: 2 x 300W @ 4Ω- Input Connectors: XLR, 1/4" Balanced- Modes: Stereo, Mono Bridge- Construction: Durable and Reliable- Cooling Technology: Efficient- Front Panel Indicators: ComprehensiveProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse: 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 400W RMS Output Stereo 4 Ω: 2 x 550W RMS Output Bridged 8 Ω: 1100W RMS Dimensions (WxDxH): 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight: 26.8 lbs (12.1 kg)

Read more less

Elevate your sound system with the Gemini XGA-4000 2-Channel Power Amplifier, offering a potent 2 x 250W @ 4Ω output to ensure robust and clear sound performance. This amplifier is crafted for professional audio applications and guarantees thermal stability and reliability with its efficient front-to-rear airflow and cooling fan technology. With the versatility of Stereo and Mono Bridge options, you have the flexibility to configure your setup according to your preferences. The comprehensive front panel indicators provide easy monitoring and adjustment ensuring optimal sound quality. Weighing just 25 lbs, it is lightweight for easy transportation yet durable for long-lasting reliability. Unleash the full potential of your audio system with the Gemini XGA-4000, combining professional amplification performance with exceptional value.Specifications:- Power Output: 2 x 250W @ 4Ω- Design: 2-Channel, 2U- Airflow: Front-to-Rear- Cooling: Cooling Fan- Setup Options: Stereo and Mono Bridge- Weight: 25 lbsProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse: 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 250W RMS Output Stereo 4 Ω: 2 x 350W RMS Output Bridged 8 Ω: 700W RMS Dimensions (WxDxH): 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight: 23.4 lbs (10.6 kg)

Read more less

- Delivering professional amplification performance with 2 x 175W @ 4Ω output- Ensuring thermal stability and reliability with front-to-rear airflow and cooling fan- Offering versatility with Stereo and Mono Bridge options, along with comprehensive front panel indicatorsExperience unmatched professional sound quality and power with the Gemini XGA-3000 2-Channel Power Amplifier. This powerhouse amplifier boasts 2 x 175W @ 4Ω output, providing you with the perfect solution for your sound system needs. With front-to-rear airflow and a cooling fan, this amplifier guarantees thermal stability and reliability, ensuring consistent performance night after night.The XGA-3000 is not just about power; it offers versatility with its balanced Stereo and Mono Bridge options, allowing you to tailor your sound to your specific requirements. The constant speed fan ensures low noise operation, while the comprehensive front panel indicators keep you informed with signal, clip, protect, and bridge status.Built for the professional sound system application, this amplifier is lightweight at just 19 lbs, making it easy to transport and set up for any event. The durable construction and efficient cooling technology of the XGA-3000 make it a reliable unit with low maintenance needs. Elevate your sound experience and choose the Gemini XGA-3000 for exceptional performance and great value.Product Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF/HF): >90dB THD (LF/HF): > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor (F=1kHz 8Ω): >350 Input Impedance: 20K Ω Fuse 5mm x 20mm: AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 150W RMS Output Stereo 4 Ω: 2 x 200W RMS Output Bridged 8 Ω: 400W RMS Dimensions (WxDxH mm): 482 x 350 x 88 Weight: 8.6kg

Read more less

Introducing the Gemini XGA-2000 Professional 2-Channel Power Amplifier, a powerhouse of performance and reliability designed for the discerning audio enthusiast. This amplifier is engineered to deliver 2 x 125W @ 4Ω of professional amplification performance in a sturdy 2U construction. Enjoy the versatility of XLR and ¼” balanced Stereo and Mono Bridge inputs, along with a comprehensive set of front-panel indicators ensuring intuitive operation. The front-to-rear airflow technology, coupled with cooling fan technology, guarantees thermal stability and reliability, allowing for consistent performance night after night. With 3 Speakon outputs for Channels A/B/Bridge, this amplifier offers flexibility and convenience in connecting your speakers. Step up your sound game with the Gemini XGA-2000 2-Channel Power Amplifier.Specifications:- Power Output: 2 x 125W @ 4Ω- Construction: 2U- Inputs: XLR and ¼” balanced Stereo and Mono Bridge- Outputs: 3 Speakon outputs for Channels A/B/BridgeProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo: 8 Ω 2 x 90W RMS Output Bridged: 8 Ω 250W RMS Dimensions: 482 x 350 x 88 mm Weight: 7.98kg

Read more less

Experience unparalleled audio performance and reliability with the Electro-Voice PA2400T 2 Channel 100V Line Amplifier. This premium amplifier is designed to meet the demands of various installation applications, providing efficient performance for both low impedance and distributed systems. Ideal for sound reinforcement, paging, and life safety applications, the PA2400T delivers a powerful output of 400W per channel for 4 Ω or 70/100 V lines, ensuring your audio needs are met with exceptional clarity and strength.The compact 2U design of the amplifier allows for easy integration into your setup, while the stepped rear-panel level attenuation provides precise control over sound output. The bridged mono out feature impressively delivers 860W into 8 Ω, ensuring that your audio is projected loud and clear.With built-in protection circuits such as Thermal Overload Protection and Dynamic Audio Limiters, the PA2400T safeguards your amplifier and connected loudspeaker systems from potential damage. This amplifier also offers a selectable high-pass filter and low-noise high-performance fans for optimal audio quality and thermal stability, making it a reliable choice for any installation.Invest in the Electro-Voice PA2400T 2 Channel 100V Line Amplifier for exceptional value, versatility, and peace of mind in your audio setup. Elevate your sound reinforcement, paging, and public address systems with this reliable and high-performance amplifier.Key Specifications:- Power Output: 2x400W/100V- Channels: 2- Construction: 2U rack-mountable design- Protection Circuits: Thermal Overload Protection, Dynamic Audio Limiters- Special Features: Bridged mono out feature, selectable high-pass filter, low-noise high-performance fans- Amplifier Type: 100V Line AmplifierProduct Specifications General Amplifier Gain: 34 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 215 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz -1dB, ref. 1kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 400/200 W 70V/100V-400 Rated output power (*rated load) THD < 1%, 1kHz: 430/215 W 70V/100V-430 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 25 V/µs 70V-46, 100V-65 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 26kg

Read more less

- Efficient performance for low impedance or distributed systems- Ideal for sound reinforcement, paging, and life safety applications- Comprehensive protection circuits to safeguard the power amplifier and connected loudspeaker systemsStep into the world of professional audio amplification with the Electro-Voice PA2250T 2-Channel 100V-Line Amplifier. Designed for optimal performance in low impedance or distributed systems, this amplifier delivers efficient power output suitable for a range of applications, from sound reinforcement to paging and life safety announcements.Experience peace of mind knowing that your audio system is protected by a host of safety features, including Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection. The integrated hi-pass filters allow you to tailor your sound by attenuating unwanted low-frequency signals, while the stepped rear-panel level attenuation gives you precise control over your audio output.Compact yet powerful, the PA2250T offers 250W per channel for 4 Ω or 70/100 V lines, with a bridged mono out option for a whopping 540W into 8 Ω. The 2 RU design ensures easy integration into your setup, while the three-stage front-to-rear fans provide optimal thermal stability without compromising on noise levels. With phoenix-type inputs and outputs for secure connections and integrated rack ears for direct mounting, this amplifier is a reliable and versatile choice for your audio needs. Elevate your sound system with the Electro-Voice PA2250T and enjoy professional-grade performance with peace of mind.Product Specifications General Amplifier Gain: 34.3 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 135 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 125 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 250/125 W 70V/100V-250 Rated output power (*rated load) THD < 1%, 1kHz: 270/135 W 70V/100V-270 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 18 V/µs 70V-41, 100V-61 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 23.5kg

Read more less

Step into a realm of unparalleled audio excellence with the Electro-Voice CPS2.6-II Installation Power Amp. This 2U power amplifier, designed for audio professionals and contractors, is a game-changer for sound systems, delivering up to 2 x 900W into 2 ohms with exceptional clarity and precision. Secure Phoenix-type input and output connections, along with rear-mounted attenuators, provide full control over audio levels. The optional RCM-810 card enables advanced networking features, allowing seamless control via IRIS-Net software. Experience optimal sound quality with the switchable 50 Hz high-pass filter, complemented by a complete protection package, three-stage front-to-rear fans, and Class-AB design for safety and longevity. Elevate your audio setup with this reliable and efficient power amp.Specifications:- Power Output: 2 x 900W @ 2 ohms- Inputs: Phoenix-type- Networking: Optional RCM-810 Card- Control: IRIS-Net Software- High-Pass Filter: 50 Hz (switchable)- Cooling: Three-stage front-to-rear fans- Design: Class-AB- Protection: Complete protection packageProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 900 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 600 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 380 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 500 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 250 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.02 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +3.1 dBu (1.11Vrms) Intermodulation Distortion (SMPTE): 0.05 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1800 Watts Maximum Bridged Output 8Ω: 1200 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional Slew Rate: 26 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 14.8kg

Read more less

Elevate your audio projects with the Electro-Voice CPS2.4-II Installation Power Amp. This robust 2-RU amplifier delivers up to 2 x 650W into 2 ohms, ensuring powerful and clear sound performance for audio installations. Featuring versatile Phoenix-type input and output connections, a switchable 50 Hz high-pass filter, and a complete protection package, this amplifier offers reliability and flexibility for any project. The CPS2.4-II provides advanced control and cooling capabilities with programmable time for custom power-on delay settings, a module slot for the optional RCM-810 card, and three-stage front-to-rear fans. Ideal for contractors and professionals, the Electro-Voice CPS2.4-II Installation Power Amp offers ease of use and customisation options to enhance your sound system setup. Specifications:- Power Output: 2 x 450W @ 4Ω- Chassis Size: 2UProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: 2.2 dBu (1.0V) Intermodulation Distortion (SMPTE): 0.1 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional (RCM-810 card) Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 12.6 kg

Read more less