Wireless Instrument Systems

Experience unparalleled sound quality and reliability with the Sennheiser EW500 G4-GBW Guitar/Instrument System. Renowned by sound engineers worldwide, this wireless system is the professionals' choice for handling multi-channel setups on the biggest stages. With up to 32 compatible channels and a staggering 88 MHz bandwidth, this system provides the flexibility and reliability you need for flawless performances. The true diversity half-rack receiver, intuitive OLED display, and Ethernet connection for Wireless Systems Manager ensure seamless control and coordination. The powerful bodypack transmitter paired with the Ci1 instrument cable delivers a perfectly balanced and upfront sound for unforgettable guitar and bass performances. Run your show with confidence and precision with this top-tier wireless system from Sennheiser.Key Features:- True diversity half-rack receiver in a full-metal housing- Up to 32 compatible channels with 3520 selectable frequencies- Ethernet connection for Wireless Systems Manager (WSM) control software- High RF output power, adjustable in three steps (10/30/50 mW)- Bandwidth: 606 - 678 MHzProduct Specifications THIS ITEM (NO.507743) OPERATES ON CH38 (GBw: 606 - 678 MHz) EM 300-500 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 626 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Receiving frequencies Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching: bandwidth up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 75 dB Intermodulation attenuation: Typically ≥ 70 dB Blocking: ≥ 75 dB Squelch: 5 to 25 dBμV in steps of 2 dB Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs): Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF): 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range: -10 °C to +55 °C Power supply: 12 V DC Current consumption: 350 mA EM 300-500 G4 - Physical & Dimensions Height: 43mm Width: 212mm Depth: 202mm Weight: 980g SK 500 G4 - General Modulation: Wideband FM Frequency ranges Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 526 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Transmission frequencies Max. 2880 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching bandwidth: up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω switchable: Low: typ. 10 mW Standard: typ. 30 mW High: typ. 50 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time: Typically 8 h SK 500 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g

Read more less

Immerse yourself in professional live sound with the Sennheiser EW100 G4-1G8 Guitar/Instrument Wireless System. This rugged all-in-one wireless system is engineered for guitarists and bassists who demand excellence on stage. The package includes a robust bodypack transmitter and a robust Ci1 instrument cable for reliable, daily use. The true diversity half-rack receiver, housed in a full-metal casing, features an intuitive LCD display for complete control over your sound.Easily synchronize the transmitter and receiver wirelessly via infrared technology, allowing for fast frequency allocation for up to 12 systems with the new linking functionality. With up to 20 compatible channels and a transmission range of up to 100 meters (300 feet), this system provides flexibility and reliability for any live performance. The high RF output power (up to 30mW) ensures strong signal transmission, complying with country regulations for seamless operation.Take advantage of the versatile wireless capabilities of this system, with 42 MHz of tuning bandwidth in a stable UHF range. Its fast and simultaneous setup allows for up to 12 linked systems, perfect for complex setups. Enjoy up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable within the stable UHF range. Key Specifications:- Frequency Range: 1G8 (1785 - 1800MHz)- Transmission Range: Up to 100 meters / 300 feet- Modulation: Wideband FM- Receiving Frequencies: Max. 1680 receiving frequencies- Bandwidth: Up to 42 MHz- RF Output Power: Up to 30mW- Receiver Type: True Diversity Half-RackProduct Specifications THIS ITEM (NO.507533) OPERATES ON 1G8 (1G8: 1785 - 1800 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g

Read more less

Immerse yourself in professional live sound with the Sennheiser EW100 G4-GB Guitar/Instrument Wireless System. Engineered for the stage, this rugged all-in-one wireless system is perfect for guitarists and bassists. The package includes a robust bodypack transmitter and a reliable Ci1 instrument cable, providing daily durability for live performances. The true diversity half-rack receiver, housed in a sturdy full-metal casing, offers intuitive control through its LCD display. Enjoy easy and flexible wireless synchronization between the transmitter and receiver via infrared, ensuring a hassle-free setup. With up to 20 compatible channels and a wide 42 MHz tuning bandwidth in a stable UHF range, this system allows for robust connectivity. The system operates on CH38 (GB: 606 - 648 MHz) for high-quality wireless transmission within a transmission range of up to 100 meters (300 feet). Benefit from the high RF output power (up to 30 mW, depending on country regulations) for reliable performance on stage.Specifications:- Frequency Range: GB: 606 - 648 MHz- Modulation: Wideband FM- Receiving Frequencies: Max. 1680 receiving frequencies, adjustable in 25 kHz steps- Frequency Banks: 20 frequency banks, each with up to 12 factory-preset channels- Bandwidth: Up to 42 MHz- Transmission Range: Up to 100 meters / 300 feet- RF Output Power: Up to 30 mWProduct Specifications THIS ITEM (NO.507528) OPERATES ON CH38 (GB: 606 - 648 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g

Read more less

Main Features Engineered for professional live sound Robust bodypack transmitter and robust Ci 1 instrument cable True diversity half-rack receiver Easy and flexible wireless synchronization Up to 20 compatible channels High RF output power EW100 G4-E Guitar/Instrument System with CI1N Cable CH70Versatile wireless systems for those who sing, speak or play instruments with up to 42 MHz tuning bandwidth in a stable UHF range and fast, simultaneous setup of up to 12 linked systems. Engineered for professional live sound: Rugged all-in-one wireless system for guitar and bass. Robust bodypack transmitter and Ci1 instrument cable for daily use on stage.THIS ITEM (NO. 507532) OPERATES ON CH70 (E: 823 - 865 MHz)Product Features Engineered for professional live sound: Rugged all-in-one wireless system for presenters and moderators Robust bodypack transmitter and robust Ci 1 instrument cable for daily use on stage True diversity half-rack receiver in a full-metal housing with intuitive LCD display for full control Easy and flexible wireless synchronization between transmitter and receiver via infrared Fast frequency allocation for up to 12 receivers via new linking functionality Up to 20 compatible channels Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range Transmission Range: up to 100 meters / 300 feet High RF output power (up to 30 mW) depending on country regulations Product Specifications THIS ITEM (NO. 507532) OPERATES ON CH70 (E: 823 - 865 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g Product Specifications THIS ITEM (NO. 507532) OPERATES ON CH70 (E: 823 - 865 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g

Read more less

Experience top-tier sound quality and seamless connectivity with the Sennheiser EW-D CI1 Wireless Instrument Mic System Ci1N Cable (U1/5) CH70. This digital wireless system eliminates noise, interference, and static bursts, allowing for crystal-clear audio transmission. The UHF transmission significantly enhances range, reliability, and scalability, perfect for performers who demand top-notch performance on stage. Setting up and operating this system is a breeze with the mobile app, which streamlines the process and eliminates complicated menus. The automated setup feature ensures reliable connections with minimal time and effort required.Enjoy flexible performance with up to 2,240 selectable frequencies, providing you with the freedom to find the perfect channel for your needs. The Lithium Ion battery pack delivers up to 12 hours of operation, ensuring you can focus on your performance without worrying about running out of power. With a sturdy metal housing, the bodypack transmitter and included CI 1 instrument cable are built to withstand daily use, making them ideal for musicians, speakers, and singers alike.Preserve every detail of your dynamic performances with the 134 dB transmitter dynamic range, capturing every nuance with precision. The 56 MHz bandwidth allows for up to 90 channels, giving you ample room to operate in crowded wireless environments.Product Features:- Digital wireless transmission eliminates noise, interference, and static bursts- UHF transmission enhances range, reliability, and scalability- Mobile App for streamlined setup and operation- Automated setup for reliable connections with minimal effort- Up to 2,240 selectable frequencies- Lithium Ion battery pack delivers up to 12 hours of operation- 56 MHz bandwidth allows for up to 90 channels- Preserves every detail of dynamic performances with a 134 dB transmitter dynamic rangeProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled audio quality and reliability with the Sennheiser EW-D CI1 Wireless Instrument Mic System Ci1N Cable (S1-7) CH38. This versatile digital wireless system provides crystal-clear sound transmission, eliminating noise, interference, and static bursts, making it the perfect choice for musicians, speakers, and performers. The UHF transmission enhances range, reliability, and scalability, while the mobile app simplifies setup and operation, ensuring a seamless user experience.The automated setup feature of this system creates reliable connections with minimal time and effort, allowing you to focus on your performance without any technical distractions. With up to 2,240 selectable frequencies and a lithium-ion battery pack providing up to 12 hours of operation, this wireless system offers tremendous flexibility and convenience.The robust bodypack transmitter, housed in durable metal, along with the included CI 1 instrument cable, is designed for daily use on stage, ensuring long-lasting performance. With a 56 MHz bandwidth allowing for up to 90 channels and 134 dB transmitter dynamic range, this system preserves every detail of even the most dynamic performances.Specifications:- Audio link frequency ranges: S1-7: 606.2 - 662 MHz- U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz- Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz- Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs- Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level- Operating temperature: -10 °C - +55 °C (14 °F - 131 °F)- Relative humidity: 5 - 95% (non-condensing)- EW-D EM (Rack Receiver) input voltage: 11 - 13 V ⎓- Input current: ≤ 300 mA- Transmit power (radiated): BLE: max. 10 mW EIRP- Audio output power: 18 dBu max.- Dimensions: 212 mmProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Upgrade your performance setup with the Sennheiser XSWD Instrument Base Set, a sophisticated wireless audio solution designed for musicians. Seamlessly integrating digital transmission technology, this elegant set simplifies the transition to a wireless setup for instruments, ensuring a reliable connection throughout your performance. With a range of up to 75m (250ft) in optimal conditions and a battery life of up to 5 hours on a single charge, this set offers both convenience and longevity. Easily switch between multiple transmitters linked to one receiver and configure any combination of transmitters and receivers to suit your needs. Enjoy the flexibility of muting from either the transmitter or receiver, adding further control to your performance. Specifications:- Dimensions: Various sizes for different components- Total Harmonic Distortion (THD): < 0.1%- Charging time: Approximately 3 hours- Operating temperature: -10 °C to +55 °C- Signal-to-noise ratio: ≥ 106 dB- Operating time: Up to 5 hours- Modulation: GFSK with TDMA- Battery Specification: Li-Ion 850 mAh- Codecs: aptX® Live- Frequency range: 2,400 - 2,483.5MHz- Max. Input voltage: 5.0 V- Transmission power: Maximum 10 mW- Voltage: 3.7 V- Operating relative humidity: 95% (non-condensing)- Latency: < 4 ms- Temperature Range: 0 °C - 60 °C- Audio frequency response: - 3.5mm Jack/XLR: 80 - 18,000 Hz - 6.3mm Jack: 10 - 18,000 HzProduct Specifications Dimensions: XSW-D XLR FEMALE TX: approx. 102 x 24 x 28 mm XSW-D MINI JACK TX: approx. 86 x 24 x 28 mm XSW-D INSTRUMENT TX: approx. 122 x 24 x 28 mm XSW-D XLR MALE RX: approx. 109 x 24 x 28 mm XSW-D MINI JACK RX: approx. 86 x 24 x 28 mm XSW-D INSTRUMENT RX: approx. 122 x 24 x 28 mm XSW-D PEDALBOARD RX: approx. 130 x 82 x 51 mm THD, total harmonic distortion: < 0.1 % Charging time: typ. 3 h Audio output: max. 12 dBu Operating temperature: -10 °C to +55 °C (14 °F to 131 °F) Signal-to-noise ratio: ≥ 106 dB Operating time: up to 5 h Modulation: GFSK with TDMA Battery Specification: Li-Ion Capacity: 850 mAh Codecs: aptX® Live Frequency range: 2,400 - 2,483.5MHz Max. Input voltage: typ. 5.0 V Transmission power: max. 10 mW Voltage: 3.7 V Operating relative humidity: 95 % (non-condensing) Latency: < 4 ms Temperature Range: 0 °C - 60 °C (32 °F - 140 °F) Audio frequency response: 3.5 mm Jack/XLR: 80 - 18,000 Hz 6.3 mm Jack: 10 - 18,000 Hz

Read more less

Unleash the full potential of your music with the Sennheiser XSW2-Ci1 GB Wireless Instrument System. This top-of-the-line system includes a True Diversity receiver with a robust instrument cable and a compact bodypack transmitter, providing unmatched flexibility for guitarists and bassists looking to elevate their performances. The system offers up to 12 compatible channels in a stable UHF band, making it ideal for demanding live stage conditions. With an intuitive LCD display for manual options, automatic frequency management, and synchronization, the XSW2-Ci1 GB System ensures hassle-free setup and reliable performance. Amplify your tunes and enjoy the freedom of wireless with this exceptional system.Key Features:- Up to 12 compatible channels- Robust instrument cable and compact bodypack transmitter- True diversity receiver with metal housing- External antennas for improved signal reception- Automatic frequency management and synchronization- Fully tunable over a wide range of UHF frequencies- Rackmount kit included for easy installationProduct Specifications General Frequency response: 50 to 16,000 Hz (–3 dB) THD, total harmonic distortion: ≤ 0.9% Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Modulation: wideband FM Output voltage: 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Diversity reception: True Diversity Frequency: 8 frequency banks, each with up to 12 factory-preset channels Frequency range A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N Squelch: switchable from 3 dBμV to 28 dBμV (via Pilot Tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization)" Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 40 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range Operation: 0°C to +40°C Storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions: approx. 200 x 42 x 127 mm Weight: approx. 680g Power supply: 12 V DC nom. / 300 mA Housing: metal AF frequency response: 50 to 16,000 Hz (–3 dB) Transmitter Dimensions: approx. 71 x 96 x 28 mm Weight: approx. 95g Operating time: approx. 10 hrs Power supply: 2 AA size batteries, 1.5 V Housing robust: ABS AF frequency response: 50 bis 16,000 Hz

Read more less

Elevate your live performances with the Sennheiser XSW2-Ci1 E Guitar/Instrument System. This all-in-one wireless system caters to guitarists and bassists, providing exceptional sound quality and reliability on stage. The set includes a robust instrument cable and a compact bodypack transmitter, ensuring hassle-free setup and optimal performance. With up to 12 compatible channels in a stable UHF band, the system offers high flexibility and versatility for musicians looking to enhance their sound. The true diversity receiver with a metal housing, automatic frequency management, and synchronization feature further contribute to a seamless and professional audio experience.Product Features:- Robust instrument cable and compact bodypack transmitter- True diversity receiver with metal housing- External antennas- Automatic frequency management and synchronization via remote channel- Fully tunable over a wide range of UHF frequencies- Rackmount kit included- Up to 12 compatible channelsProduct Specifications General Frequency response: 50 to 16,000 Hz (–3 dB) THD, total harmonic distortion: ≤ 0.9% Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Modulation: wideband FM Output voltage: 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Diversity reception: True Diversity Frequency: 8 frequency banks, each with up to 12 factory-preset channels Frequency range A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N Squelch: switchable from 3 dBμV to 28 dBμV (via Pilot Tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization)" Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 40 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range Operation: 0°C to +40°C Storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions: approx. 200 x 42 x 127 mm Weight: approx. 680g Power supply: 12 V DC nom. / 300 mA Housing: metal AF frequency response: 50 to 16,000 Hz (–3 dB) Transmitter Dimensions: approx. 71 x 96 x 28 mm Weight: approx. 95g Operating time: approx. 10 hrs Power supply: 2 AA size batteries, 1.5 V Housing robust: ABS AF frequency response: 50 bis 16,000 Hz

Read more less

Elevate your musical performance with the Sennheiser XSW1-Ci1 GB Guitar/Instrument Wireless System. Perfect for guitarists and bassists seeking exceptional live sound quality, this system offers up to 10 compatible channels in a stable UHF band. Featuring Sennheiser's renowned evolution microphone capsules, the XS Wireless 1 set includes a compact bodypack transmitter and a robust instrument cable for seamless connectivity. With automatic frequency management, easy setup, and hassle-free handling, this wireless system ensures a reliable and professional performance every time.Product Specifications:- THD, total harmonic distortion: ≤ 0.9%- Signal-to-noise ratio: ≥ 103 dBA- RF output power: 10 mW- Switching bandwidth: up to 24 MHz- Operating time: approx. 10 hrs- Modulation: Wideband FM- Frequency range: A: 548-572 MHz, GB: 606-630 MHz, B: 614-638 MHz, C: 766-790 MHz, D: 794-806 MHz, E: 821-832 MHz, 863-865 MHz, K: 925-937.5 MHz- Sensitivity: < 3 μV at 52 dB(A)rms S/N- SPL for peak deviation: 130 dB- Squelch: adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)- Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization)- Input sensitivity: 1.5 mV / Pa- AF frequency response: Receiver: 50 to 16,000 Hz (–3 dB)- Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps- Audio adjustment range: 45 dB, adjustable in 5-dB steps- Line / MicProduct Specifications General THD, total harmonic distortion: ≤ 0.9% Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Operating time: approx. 10 hrs Modulation: Wideband FM Frequency: 8 frequency banks, each with up to 10 factory-preset channels Frequency range: A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N SPL for peak deviation: 130 dB Squelch: adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Input sensitivity: 1.5 mV / Pa AF frequency response: Receiver: 50 to 16,000 Hz (–3 dB) Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 45 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range: operation: 0°C to +40°C, storage: –20°C to +70°C Receiver Principle: double superheterodyne Diversity principle: Antenna switching diversity via internal antennas Physical & Dimensions Dimensions Receiver: approx. 200 x 42 x 127 mm Bodypack transmitter: approx. 71 x 96 x 28 mm Weight: approx. 340g (receiver), approx. 95g (transmitter) Power supply: Receiver: 12 V DC nom. / 300 mA Transmitter: 2 AA size batteries, 1.5 V Output voltage: 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Housing: Rugged ABS housing

Read more less

Amplify your musical performances with the Sennheiser XSW1-Ci1 E Guitar/Instrument System. This wireless system is designed for guitarists and bassists, making it perfect for live sound applications. Experience a reliable wireless transmission with automatic frequency management and synchronization, ensuring a hassle-free setup. The XS Wireless 1 XSW1-CI1 E Guitar/Instrument System includes a compact bodypack transmitter, a robust instrument cable, and Sennheiser's renowned evolution microphone capsules for outstanding audio quality.The intuitive stationary receiver allows for quick installation, and the antenna-switching diversity reception ensures a stable connection. With up to 10 compatible channels in a stable UHF band, you can trust this system to deliver exceptional performance every time. The system offers a wide bandwidth with selectable UHF frequencies, providing flexibility for different environments.Specifications:- THD, total harmonic distortion: ≤ 0.9%- Signal-to-noise ratio: ≥ 103 dBA- RF output power: 10 mW- Switching bandwidth: up to 24 MHz- Operating time: approx. 10 hrs- Modulation: Wideband FM- Frequency range: A: 548-572 MHz- Sensitivity: < 3 μV at 52 dB(A)rms S/N- SPL for peak deviation: 130 dB- Squelch: adjustable from 3 dBμV to 28 dBμV- Frequency response: 50 to 16,000 Hz- Input sensitivity: 1.5 mV / Pa- AF frequency response: 50 to 16,000 Hz- Audio adjustment range: 45 dBProduct Specifications General THD, total harmonic distortion: ≤ 0.9% Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Operating time: approx. 10 hrs Modulation: Wideband FM Frequency: 8 frequency banks, each with up to 10 factory-preset channels Frequency range: A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N SPL for peak deviation: 130 dB Squelch: adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Input sensitivity: 1.5 mV / Pa AF frequency response: Receiver: 50 to 16,000 Hz (–3 dB) Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 45 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range: operation: 0°C to +40°C, storage: –20°C to +70°C Receiver Principle: double superheterodyne Diversity principle: Antenna switching diversity via internal antennas Physical & Dimensions Dimensions Receiver: approx. 200 x 42 x 127 mm Bodypack transmitter: approx. 71 x 96 x 28 mm Weight: approx. 340g (receiver), approx. 95g (transmitter) Power supply: Receiver: 12 V DC nom. / 300 mA Transmitter: 2 AA size batteries, 1.5 V Output voltage: 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Housing: Rugged ABS housing

Read more less

Experience wireless freedom on stage with the Gemini GMU-G100 Wireless Guitar System. This innovative UHF High Band Single Channel Receiver, featuring multi-selectable frequencies suitable for Europe (863-865MHz), ensures a stable and reliable wireless connection for your instrument. The set-up is hassle-free thanks to the ultra-fast Microcomputer Controlled PLL Oscillation Circuit and Advance Compression Circuit that effectively suppresses unwanted noise.The GMU-G100 includes the GT10 Transmitter with a 1/4" Jack, allowing you to effortlessly connect it to your Guitar, Keyboard, mixer, or any instrument with a 1/4” output. The R10 Receiver, also equipped with a 1/4" Jack, can be connected to powered speakers, amplifiers, pedals, or mixers. This wireless system is versatile and can cater to a wide range of audio devices that require movement on stage.The GMU-G100 Wireless Guitar System is powered by rechargeable Lithium batteries, providing hours of use on a single charge. Its long-distance wireless connection capability of over 50 meters ensures seamless performance whether you're at a music performance, wedding, conference, or even a live stream. A USB rechargeable feature adds to the convenience, allowing you to easily charge both the Transmitter and Receiver via an included cable.Key Features:- UHF High Band Single Channel Receiver- Multi-selectable frequencies- Ultra-fast Microcomputer Controlled PLL Oscillation Circuit- Advance Compression Circuit to reject unwanted noise- Rechargeable batteries with hours of use on a single chargeProduct Specifications Wireless Range: > 50 Meters Distortion: < 0.6% Dynamic Range: ≥ 106 dB Frequency Range: R3 (Europe): 863-865MHz Frequency Response: 20Hz-18KHz, +1dB/-3dB Construction Material: ABS Plastic Transmitter Battery: 500mAh Rechargeable Lithium Receiver Battery: 500mAh Rechargeable Lithium Charging: Micro-USB (Cable Included) Receiver Charge Time: ~2 hours Receiver Play Time: ~5 hours Transmitter Charge Time: ~2 hours Transmitter Play Time: ~4 hours

Read more less

Main Features RE3-BPGC-8M Bodypack Instrument Set Included: GC3 Instrument Cable RE3-BPT Bodypack Transmitter RE3-RX Diversity Receiver Setup is quick and simple using the RE3 clear frequency scan and sync function RE3-BPGC-8M Bodypack Instrument Set 823-865MHzBodypack UHF wireless set featuring the GC3 instrument cable for wireless music performance. The GC3 is a special purpose cable for connecting instruments or line level signal sources with ¼” output jacks to the RE3-BPT bodypack transmitter.Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.Product Features GC3 Instrument Cable Robust cable connects instrument to RE3-BPT Easy-to-grip ¼” plug 4-pin mini plug adapts to other EV bodypack transmitters RE3-BPT Bodypack Transmitter Robust metal body Sync function for easy frequency setup Selectable low and high output power (band specific) Up to 36 MHz tuning bandwidth (band specific) Unique magnetic latch and lock for easy access to batteries RE3-RX Diversity Receiver Diversity reception minimizes dropouts Frequency scanning for selecting open frequencies Sync function links transmitter to receiver for easy setup Up to 36 MHz tuning bandwidth (band specific) for trouble-free operation Easy-to-read LCD display Product Specifications GC3 Instrument Cable Electrical contact pinouts: Pin #1 - Ground, shield Pin #2 - Audio Pin #3 - N/C Pin #4 - N/C Connectors: 6.5 mm (1/4-inch) phone plug 4-pin mini plug Dimensions (cable length) : 32.7” (830 mm) Net weight: 1.94 oz (55 g) Shipping weight: 2.12 oz (60 g) RE3-BPT Bodypack Transmitter Frequency oscillation mode: Phase-locked loop (PLL) Available band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) *8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic RF power output: Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW 5H (560-596MHz): Low 10mW / High 50mW 6M (653-663MHz): Low 10mW / High 20mW 8M (823-865MHz) 10mW T (803-806MHz): Low 10mW / High 50mW Display by: LCD + LED Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock. RF stability: <±10kHz@Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Input jack: 4-pin mini jack Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Finish: Black polyurethane paint Dimensions (without antenna): Height: 3.2 in. (81.5mm) Width: 2.54 in. (64.5mm) Depth: 0.98 in. (25mm) Net weight: 6.14 oz. (0.174 kg) Gross weight: 8.29 oz. (0.235 kg) RE3-RX Diversity Receiver Frequency oscillation mode: Phase-locked loop (PLL) Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) * 8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion (Thd): <0.6%@1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT) Antenna type: Detachable ½ wave with BNC connector Antenna booster power: DC12 - 15V/100mA Function display by: LCD Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator. Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset. Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch) Audio frequency output level: Ref：±22.5kHz Dev@1kHz Tone ¼” (6.3mm) Phone Jack：-10dBV XLR Jack：-4dBV(Line)、-24dBV(MIC) Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack Power supply: DC12~15V/500mA Finish: Black polyurethane paint Dimensions: Width: 8.27 in. (210mm) Height: (with feet attached) 1.85 in. (47mm) Height: (without feet attached) 1.73 in. (44mm) Depth: (including antenna jack) 6.89 in. (175mm) Depth: (not including antenna jack) 6.1 in. (155mm) Net weight: 2.71 lb (1.23 kg) Gross weight: 3.28 lb (1.49 kg) Product Specifications GC3 Instrument Cable Electrical contact pinouts: Pin #1 - Ground, shield Pin #2 - Audio Pin #3 - N/C Pin #4 - N/C Connectors: 6.5 mm (1/4-inch) phone plug 4-pin mini plug Dimensions (cable length) : 32.7” (830 mm) Net weight: 1.94 oz (55 g) Shipping weight: 2.12 oz (60 g) RE3-BPT Bodypack Transmitter Frequency oscillation mode: Phase-locked loop (PLL) Available band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) *8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic RF power output: Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW 5H (560-596MHz): Low 10mW / High 50mW 6M (653-663MHz): Low 10mW / High 20mW 8M (823-865MHz) 10mW T (803-806MHz): Low 10mW / High 50mW Display by: LCD + LED Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock. RF stability: <±10kHz@Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Input jack: 4-pin mini jack Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Finish: Black polyurethane paint Dimensions (without antenna): Height: 3.2 in. (81.5mm) Width: 2.54 in. (64.5mm) Depth: 0.98 in. (25mm) Net weight: 6.14 oz. (0.174 kg) Gross weight: 8.29 oz. (0.235 kg) RE3-RX Diversity Receiver Frequency oscillation mode: Phase-locked loop (PLL) Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) * 8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion (Thd): <0.6%@1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT) Antenna type: Detachable ½ wave with BNC connector Antenna booster power: DC12 - 15V/100mA Function display by: LCD Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator. Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset. Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch) Audio frequency output level: Ref：±22.5kHz Dev@1kHz Tone ¼” (6.3mm) Phone Jack：-10dBV XLR Jack：-4dBV(Line)、-24dBV(MIC) Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack Power supply: DC12~15V/500mA Finish: Black polyurethane paint Dimensions: Width: 8.27 in. (210mm) Height: (with feet attached) 1.85 in. (47mm) Height: (without feet attached) 1.73 in. (44mm) Depth: (including antenna jack) 6.89 in. (175mm) Depth: (not including antenna jack) 6.1 in. (155mm) Net weight: 2.71 lb (1.23 kg) Gross weight: 3.28 lb (1.49 kg)

Read more less