Digital Zone Mixers

Transform your audio experience with the Optimal Audio Zone 4 4-Zone Audio Controller DSP & WebApp 2 Mic/4 Line. Elevate every sound to perfection with this innovative audio processor that puts you in complete control of up to four distinct zones. Designed with a full suite of audio controls, this device offers unparalleled flexibility and ease of use.Immerse yourself in a world of seamless signal routing, thanks to the fully flexible routing options that allow you to customise each zone to your exact specifications. The intuitive WebApp interface empowers you to effortlessly configure your system and exert precise control over your audio environment with just a few clicks.Whether you're setting the mood in a stylish bar, creating an inviting atmosphere in a restaurant, or keeping the energy up in a busy retail space, the Optimal Audio Zone 4 is your ultimate audio companion. With 2 mic inputs, 4 stereo line inputs, and 2 HDMI inputs for added versatility, this audio controller is the cornerstone of any professional sound system.Enjoy the convenience of fully programmable presets and timed events, ensuring that your audio system operates seamlessly throughout the day. And with its very competitive pricing, the Optimal Audio Zone 4 offers exceptional value without compromising on quality.Step into a world of unparalleled sound management with the Optimal Audio Zone 4 4-Zone Audio Controller DSP & WebApp 2 Mic/4 Line. Discover a new level of audio excellence for your space.Product Specifications TYPE: 4 zone audio processor with DSP and loudspeaker presets MIC INPUTS: 2 with 48V phantom power, +12dB to +55dB gain MIC INPUT PROCESSING: Fixed hi-pass filter @160Hz; sweepable mid-band 200Hz-5kHz, +/-12dB; HF shelf @12kHz LINE INPUTS: 4 stereo with +26dB gain trim. SPDIF option on input 1 HDMI INPUTS: 2 with ARC LINE OUTPUTS: 4 ZONEPAD SOCKETS: 4 PAGING INPUTS (CAT 5): 2 LAN ETHERNET100Mbps: Yes ALARM OVERRIDE: Yes DIMENSIONS: (W) 480mm x (H) 88mm x (D) 400mm (W) 18.90” x (H) 3.46” x (D) 15.75” WEIGHT: 9.2kg (20.2lbs)

Read more less

Introducing the Cloud DCM1 Digital 8-Zone Mixer - a sophisticated audio solution that elevates sound installations to a new level of precision and flexibility. Perfect for contractors and installers seeking a versatile mixer that allows seamless routing of both line and microphone signals, the DCM1 stands out as a pioneer in the realm of microprocessor-controlled multi zoners.With 8 stereo line inputs, including 1 balanced input, and 8 balanced line outputs (2 stereo + 6 mono), the Cloud DCM1 ensures optimal audio quality across all zones. Its compatibility with optional line inputs (LE-1) and microphone inputs (ME-1) further enhances its adaptability, catering to a diverse range of audio setups.Equipped with sophisticated features such as mic paging to all zones with fully programmable override logic, configurable EQ settings via remote controls, and a robust RS232 interface for seamless integration with AMX/Crestron systems, the Cloud DCM1 redefines convenience and control in sound management.The DCM1's compatibility with optional active input modules expands its functionality, offering unparalleled flexibility in audio configuration. Additionally, its intuitive digital control interface allows for remote control via LCD digital controllers, making operation a breeze for users.Designed with a keen focus on user-friendliness and versatility, the Cloud DCM1 maintains the traditional simplicity of Cloud products while incorporating advanced digital control capabilities. Contractors and installers can now enjoy the best of both worlds - the reliability of analogue I/O and the adaptability of digital control - in a single, compact unit.Experience the future of audio management with the Cloud DCM1 Digital 8-Zone Mixer. Discover a world where precision meets flexibility, where traditional reliability merges with cutting-edge technology. Elevate your sound installations to unparalleled heights with the Cloud DCM1.Product Specifications Line Inputs Frequency Response: 20 Hz - 20k Hz ±1 dB Distortion: <0.05 %, 20 Hz - 20k Hz Sensitivity: 195 mV (-12 dBu) to 3.1 V (+12 dBu) Input Gain Control: 24 dB range Input Impedance: 47k Ω Headroom: >+10 dB Noise: -90 dB A weighted (0 dB gain) Equalisation HF: ±14 dB/10k Hz MID: ±14 dB/1200 Hz LF: ±14 dB/50 Hz Paging Microphone Inputs Frequency Response: 100 Hz / -3 dB(filter) to 20 kHz ±0.5dB Distortion: <0.05% 20 Hz-20k Hz Gain Range: 10 dB - 50 dB Input Impedance: >2k Ω (balanced) Phantom Power: +12 V (PCB jumper for on/off) Headroom: >20 dB Noise: -120 dB EIN 22 Hz - 22k Hz (150 Ω) Equalisation HF: ±10 dB/5k Hz LF: ±10 dB/100 Hz Outputs Balanced Zone Outputs: 775 mV (0 dBu) Minimum load impedance: 600 Ω Maximum output level: +10 dBu (2.6 V) External Power Supply External Supply Input: 100 V-240 V AC; 47-63 Hz; 1.35 A Power supply: +12 V, 3 A; -12 V 1 A Physical & Dimensions Dimensions (w x h x d): 482.6 mm x 88 mm (2U) x 170 mm Dimensions (packed): 570 mm x 270 mm x 220 mm Weight net: 3.12 kg Weight packed: 4 kg packed

Read more less

Introducing the Cloud DCM1e Digital 8-Zone Mixer with Ethernet Port/Web Control 2U, a cutting-edge solution for seamless audio management in commercial settings. 🎵 Elevate your audio experience with the DCM1e, the advanced Ethernet version of the acclaimed DCM1 Digital Control Zone Mixer. Harnessing the power of an Ethernet port located on the rear panel, this mixer brings unparalleled convenience by allowing connection to an independent or existing wireless router. Experience the freedom of remote configuration and control from any mobile device on the network.🔊 With 8 Stereo Line Inputs and 8 Balanced Line Outputs (including 2 Stereo and 6 Mono), the DCM1e offers unparalleled versatility. The built-in Ethernet web-server enables intuitive control through 4 simple interface pages on any mobile or fixed device. End Users benefit from convenient "limited installer defined" controls, while Installers enjoy administrator status with password-protected "Configuration Options."🎤 Seamlessly integrate microphone paging to any zone with fully programmable override logic, along with a dedicated analogue paging Microphone Input featuring analogue contact closure selection. With Configurable Remote Controls (CDR-1) and Configurable Line Priority by Zone, the DCM1e ensures effortless audio management tailored to your specific needs.🔌 Additionally, the DCM1e boasts an RS-232 Interface for Crestron/Other Control, Ethernet Connection Socket, and Web Server for PC, Tablet & Mobile Device Control. Compatible with Bose, Amina, and Active Audio EQ cards, this mixer offers unbeatable flexibility for diverse audio setups.🔈 Experience impeccable audio quality with a frequency response of 20 Hz - 20 kHz ±1 dB, distortion of <0.05%, and a sensitivity range from 195 mV (-12 dBu) to 3.1 V (+12 dBu). Take your audio control to the next level with the Cloud DCM1e Digital 8-Zone Mixer - the ultimate solution for professional sound management.Product Specifications Line Inputs Frequency Response: 20 Hz - 20k Hz ±1 dB Distortion: <0.05 %, 20 Hz - 20k Hz Sensitivity: 195 mV (-12 dBu) to 3.1 V (+12 dBu) Input Gain Control: 24 dB range Input Impedance: 47k Ω Headroom: >+10 dB Noise: -90 dB A weighted (0 dB gain) Equalisation HF: ±14 dB/10k Hz MID: ±14 dB/1200 Hz LF: ±14 dB/50 Hz Paging Microphone Inputs Frequency Response: 100 Hz / -3 dB(filter) to 20 kHz ±0.5dB Distortion: <0.05% 20 Hz-20k Hz Gain Range: 10 dB - 50 dB Input Impedance: >2k Ω (balanced) Phantom Power: +12 V (PCB jumper for on/off) Headroom: >20 dB Noise: -120 dB EIN 22 Hz - 22k Hz (150 Ω) Equalisation HF: ±10 dB/5k Hz LF: ±10 dB/100 Hz Outputs Balanced Zone Outputs: 775 mV (0 dBu) Minimum load impedance: 600 Ω Maximum output level: +10 dBu (2.6 V) External Power Supply External Supply Input: 100 V-240 V AC; 47-63 Hz; 1.35 A Power supply: +12 V, 3 A; -12 V 1 A Physical & Dimensions Dimensions (w x h x d): 482.6 mm x 88 mm (2U) x 170 mm Dimensions (packed): 570 mm x 270 mm x 220 mm Weight net: 3.12 kg Weight packed: 4 kg packed

Read more less

Introducing the Audio Technica ATDM-1012DAN Network Smartmixer, a cutting-edge audio solution designed for the most demanding audio applications. This 1U mixer is a versatile powerhouse, boasting a 22-input × 12-bus full-matrix mixer that offers unparalleled flexibility and control over your audio routing.Here are some key features that make the Audio Technica ATDM-1012DAN a must-have for your setup:- 10 Mic/Line inputs, each equipped with a discrete microphone preamplifier, ensuring high-quality sound capture.- Stereo linking capabilities for channels 7/8 and 9/10, allowing for enhanced stereo imaging.- Compatibility with up to two ES954 hanging-array microphones (sold separately) for added flexibility in your audio setup.- 8 balanced outputs with BTL circuits and 2 unbalanced stereo outputs for versatile connectivity options.- Dante ATDM-1012DAN Digital Smartmixer technology for seamless integration into Dante-enabled networks.Whether you're in the hospitality industry, corporate environment, or a courtroom setting, the ATDM-1012DAN is engineered to meet your audio needs with precision. Its 14 input / 12 bus matrix mixer configuration, along with features such as phase inversion, low-cut filter, and a four-band parametric EQ on each channel, ensures exceptional audio quality and control.The smart mixing capabilities of the ATDM-1012DAN offer advanced features such as gain sharing or gating mixers, Acoustic Echo Cancellation (AEC) processors, compressors/de-essers, and feedback suppressors. With comprehensive control options including front panel adjustments and remote access via the Web Remote Manager software, managing your audio setup has never been more efficient.Experience the perfect blend of power, flexibility, and ease of operation with the Audio Technica ATDM-1012DAN Network Smartmixer. Elevate your audio game to new heights with this state-of-the-art solution.Product Specifications Power supply: 100 to 240 V AC (50/60 Hz) Power consumption: 65 W Operating temperature range: 0 to 40°C (32 to 104°F) Operating humidity range: 25 to 85% (with no condensation) Dimensions (including protrusions): 482 mm (19") × 343 mm (14") × 49.8 mm (2.0") (W×D×H) Weight: 3.6 kg (7.9 lbs) Finish: Front Panel: Black with silver lines Top/rear/sides: Black Frequency characteristics: 20 Hz to 20 kHz (MIC -16 dBu): +1.0/-1.0 dB 20 Hz to 20 kHz (MIC -60 dBu): +1.0/-2.0 dB 20 Hz to 20 kHz (LINE 24 dBu): +1.0/-1.0 dB 20 Hz to 20 kHz (LINE -40 dBu): +1.0/-2.0 dB Dynamic range: 112 dB or higher, A-weighted/ST S/N ratio: 92 dB or higher, A-weighted/ST Headroom: 20 dB or higher Input referred noise: -127 dBu or less, Rs = 150 ohm Common-mode rejection ratio: 80 dB or higher, 1 kHz Residual noise: -88 dBu or less, A-weighted Maximum gain: 64 dB Channel separation: -80 dB or less, 1 kHz unity Total harmonic distortion: 0.03% or less, 1 kHz unity Analog input: MIC max.: 0 dBu MIC unity: -40 dBu LINE max.: +24 dBu LINE unity: +4 dBu / 0 dBV / -10 dBV / -20 dBV, Switchable ST max.: +20 dBV ST unity: 0 dBV / -10 dBV / -20 dBV, Switchable Analog output: OUTPUT 1 to 8 max.: +24 dBu / +20 dBV / +10 dBV OUTPUT 1 to 8 unity: +4 dBu / 0 dBV / -10 dBV, Switchable OUTPUT ST max.: +20 dBV / +10 dBV / -13 dBV OUTPUT ST unity: 0 dBV / -10 dBV / -33 dBV, Switchable Phantom power: +48 V (Euroblock input) PAD (Attenuation level): -24 dB I/O connector: MIC/LINE INPUT 1 to 10: Euroblock connectors (3-pin) ST INPUT 1/2: Euroblock connectors (3-pin) OUTPUT 1 to 8: Euroblock connectors (3-pin) ST OUTPUT 1/2: Euroblock connectors (3-pin) Level indicator: SIGNAL/PEAK: 1 point (Red/Yellow/Green) Peak indicate: -5 to 0 dB Peak hold time: 2 sec. Remote control: IP protocol: RJ-45×1 pc IP address: 192.168.33.102 (factory default) Communication speed: 100 Mbps Network: ATDM-1012: Network port ATDM-1012DAN: Dante Primary/Secondary ports Link I/O: IP protocol RJ-45 × 4 pcs. Communication speed 100 Mbps USB Type B: Channel Stereo input x 1 ch, stereo output x 1 ch (24-bit) Communication speed High-speed (480 Mbps) AEC Echo cancellation amount: Max. 90 dB Tail length: Max. 400 msec A/D converter Resolution: 24-bit Dynamic range: 115 dB D/A converter Resolution: 24-bit Dynamic range: 115 dB Accessories Euroblock connector ×22, power cable

Read more less

Experience unparalleled audio control with the Audio Technica ATDM-1012 Network Smartmixer 10-Mic/Line device. Designed for versatility and precision, this 1U mixer boasts a 22-input × 12-bus full-matrix mixer that integrates seamlessly into a range of audio setups.Key features of the ATDM-1012 Network Smartmixer include:- 10 Mic/Line inputs with premium preamps for exceptional sound quality- Stereo linking capability for channels 7/8 and 9/10 for added flexibility- Compatibility with up to two ES954 hanging-array microphones (sold separately) to enhance your audio capture- A total of 8 balanced outputs with BTL circuits and 2 unbalanced stereo outputs, providing a variety of connectivity options- USB audio I/O with 1 stereo input and 1 stereo output for convenient digital audio integrationPerfect for applications in hospitality, corporate, courtroom settings, and beyond, the ATDM-1012 delivers superb performance with its advanced features. The mixer offers a 14 input / 12 bus matrix design, with additional digital inputs possible via AT-LINK or Dante integration in the ATDM-1012DAN version.Each input channel on the ATDM-1012 comes equipped with essential controls such as phase inversion, low-cut filter, and a four-band parametric EQ, allowing for precise audio adjustments. The mixer's smart mixing capabilities, including four mixing groups and Acoustic Echo Cancellation (AEC) processors, ensure optimal audio quality in any environment.Effortlessly configurable and highly adaptable, the ATDM-1012 Network Smartmixer combines professional-grade performance with user-friendly operation. Make seamless audio adjustments with the touch of a button on the front panel or dive deeper into settings using the comprehensive Web Remote Manager software.Unlock a new level of audio control with the Audio Technica ATDM-1012 Network Smartmixer, the ultimate solution for demanding audio applications where quality and versatility are paramount.Product Specifications Power supply: 100 to 240 V AC (50/60 Hz) Power consumption: 65 W Operating temperature range: 0 to 40°C (32 to 104°F) Operating humidity range: 25 to 85% (with no condensation) Dimensions (including protrusions): 482 mm (19") × 343 mm (14") × 49.8 mm (2.0") (W×D×H) Weight: 3.6 kg (7.9 lbs) Finish: Front Panel: Black with silver lines Top/rear/sides: Black Frequency characteristics: 20 Hz to 20 kHz (MIC -16 dBu): +1.0/-1.0 dB 20 Hz to 20 kHz (MIC -60 dBu): +1.0/-2.0 dB 20 Hz to 20 kHz (LINE 24 dBu): +1.0/-1.0 dB 20 Hz to 20 kHz (LINE -40 dBu): +1.0/-2.0 dB Dynamic range: 112 dB or higher, A-weighted/ST S/N ratio: 92 dB or higher, A-weighted/ST Headroom: 20 dB or higher Input referred noise: -127 dBu or less, Rs = 150 ohm Common-mode rejection ratio: 80 dB or higher, 1 kHz Residual noise: -88 dBu or less, A-weighted Maximum gain: 64 dB Channel separation: -80 dB or less, 1 kHz unity Total harmonic distortion: 0.03% or less, 1 kHz unity Analog input: MIC max.: 0 dBu MIC unity: -40 dBu LINE max.: +24 dBu LINE unity: +4 dBu / 0 dBV / -10 dBV / -20 dBV, Switchable ST max.: +20 dBV ST unity: 0 dBV / -10 dBV / -20 dBV, Switchable Analog output: OUTPUT 1 to 8 max.: +24 dBu / +20 dBV / +10 dBV OUTPUT 1 to 8 unity: +4 dBu / 0 dBV / -10 dBV, Switchable OUTPUT ST max.: +20 dBV / +10 dBV / -13 dBV OUTPUT ST unity: 0 dBV / -10 dBV / -33 dBV, Switchable Phantom power: +48 V (Euroblock input) PAD (Attenuation level): -24 dB I/O connector: MIC/LINE INPUT 1 to 10: Euroblock connectors (3-pin) ST INPUT 1/2: Euroblock connectors (3-pin) OUTPUT 1 to 8: Euroblock connectors (3-pin) ST OUTPUT 1/2: Euroblock connectors (3-pin) Level indicator: SIGNAL/PEAK: 1 point (Red/Yellow/Green) Peak indicate: -5 to 0 dB Peak hold time: 2 sec. Remote control: IP protocol: RJ-45×1 pc IP address: 192.168.33.102 (factory default) Communication speed: 100 Mbps Network: ATDM-1012: Network port ATDM-1012DAN: Dante Primary/Secondary ports Link I/O: IP protocol RJ-45 × 4 pcs. Communication speed 100 Mbps USB Type B: Channel Stereo input x 1 ch, stereo output x 1 ch (24-bit) Communication speed High-speed (480 Mbps) AEC Echo cancellation amount: Max. 90 dB Tail length: Max. 400 msec A/D converter Resolution: 24-bit Dynamic range: 115 dB D/A converter Resolution: 24-bit Dynamic range: 115 dB Accessories Euroblock connector ×22, power cable

Read more less

Enhance your audio setup with the Audio Technica ATDM-0604a Network Smartmixer 4-Mic/2-Mic/Line CAT5/USB Half-1U. This cutting-edge automatic mixer is the ultimate solution for meetings, conferences, broadcasts, and other events requiring multiple microphone inputs.Featuring SmartMixer® technology, this mixer ensures seamless audio quality by automatically mixing channels in gate or gain sharing mode. Say goodbye to feedback, ambient noise, and comb filtering - the ATDM-0604 guarantees consistent, high-quality audio output from all your inputs.With controls and LED indicators on the front panel, adjusting input/output levels, presets, phantom power, and more is simple and intuitive. The mixer also boasts Web Remote functionality, allowing you to make adjustments from your PC, Mac, iOS, or Android device.Equipped with 4 balanced microphone inputs, 2 balanced Mic/Line inputs, and 1 unbalanced stereo input, this mixer provides flexibility for various setups. The inclusion of network (Cat5e), USB ports, and A/B Audio-Technica Link ports enables seamless connectivity and expanded setup possibilities.Experience professional audio processing with the Audio Technica ATDM-0604a Network Smartmixer - the perfect choice for achieving exceptional sound quality in any setting. Elevate your audio game and impress your audience with pristine audio clarity and seamless mixing capabilities.Product Specifications General Inputs: 7 (4 balanced mic, 2 balanced Mic/Line and 1 stereo unbalanced) Outputs: 3 (1 stereo and 2 mono) Operation: Front panel direct or Web Remote Physical & Dimensions Height: 152mm Width: 584mm Depth: 432mm Weight: 6.8kg

Read more less

Enhance your sound control capabilities with the sophisticated Apart ZONE4 4-Zone Stereo Mixer. This 1U pre-amplifier revolutionises your audio experience by enabling you to effortlessly manage four stereo zones from a single compact unit.Imagine the freedom to select and play music from any of the four input sources in any of the available four zones. With the ZONE4, this becomes a seamless reality, thanks to its user-friendly design. You can fine-tune your audio with MIC-MIX level control and bass-treble adjustments on a per-zone basis, giving you complete control over your sound environment.Adding an extra layer of versatility, the ZONE4 allows you to assign up to three microphones to each zone through convenient dip switches. MIC 1 and MIC 2 are equipped with phantom power supply, enhancing the audio quality and amplifying your voice projection.The unit's flexibility extends further with the ability to control it via the front panel with a digital display, RS232-connector, IR serial, or the ZONE4R remote control panels. The remote control panels feature LED status displays and intuitive buttons for music level adjustment, MIC/MIX level control, source selection, and mute functions.Installation is a breeze with the wired remote control connected via a standard CAT5 cable, ensuring a hassle-free setup process. With line input selectors, music level controls, independent MIC-MIX settings, and bass-treble adjustments per zone, the ZONE4 offers a comprehensive audio management solution for your diverse needs.Discover the power of seamless audio control and elevate your sound experience with the Apart ZONE4 4-Zone Stereo Mixer. Effortlessly switch between sources, fine-tune your sound, and enjoy unparalleled flexibility in managing your audio zones. Elevate your audio game with Apart ZONE4.Product Specifications General 19" (483 mm wide) rack mounting: yes Power supply: 115 - 230 VAC Power consumption (max): 25 watts Zone outputs: 4 stereo Output level balanced (dB): 0 Output level unbalanced (dB): 0 S/PDIF output: no Signal to noise level SNR (dB): >90 Total harmonic distortion TBH (%): <0.02 Crosstalk (dB): >75 Music level control: yes MIC level control: yes VCA level control: no Source selection per zone: yes MIC inputs balanced: 3 MIC inputs unbalanced: 0 Inputs with Phantom power: 2 Phantom power voltage: 18 volts Noise gate on MIC: no Selectable input dynamics: no Selectable output dynamics: no Line input balanced: 0 Line input unbalanced: 4 stereo S/PDIF input: no Tone control: yes RS232 (serial communication port): yes Wall panel controls: yes Priority input contact: yes Maximum qty paging Mics: 4 Chime: no Emergency input: yes Priority output contact: no Priority levels: 2 Frequency response (in Hz): 20 - 30 k Applicable in 100V: yes Applicable low impedance: yes Physical & Dimensions Weight: 2.75kg Height- rack units: 1U Depth (build in): 196mm Depth (incl front): 205mm

Read more less