Power Amplifiers

Upgrade your sound reinforcement setup with the Yamaha PX8 Class D Power Amplifier. This professional-grade amplifier delivers remarkable power and precision, with 2x1050W output at 4Ω and a newly developed Class-D amplifier engine. Equipped with flexible onboard PEQ, crossover, filters, delay, and limiter functions, this amplifier ensures optimal sound quality tailored to your specific preferences. Also featuring Yamaha Speaker presets, the PX8 offers utilities for safe and secure operation. The Yamaha PX8 Class D Power Amplifier is a versatile and reliable choice for various sound reinforcement environments, providing 800W x 2 at 8Ω and 1050W x 2 at 4Ω. Elevate your audio experience with this powerhouse amplifier.Specifications:- Internal Sampling Frequency Rate: 48kHz- Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)- Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz)- S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu)- Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)- Voltage Gain/Sensitivity: 8Ω Volume max: 32.0dB/+8.3dBu- Maximum input voltage: +24dBu- Input impedance: 20kΩ (Balance), 10kΩ (Unbalance)I/O Connectors:- Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2- Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2- Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update; AC inlet x1 with AC cord clampIndicators:- POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green)Processors:- Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker ProcessorElevate your audio setup with the Yamaha PX8 Class D Power Amplifier!Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protectionThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protectionThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 7.2kg

Read more less

Experience unparalleled power and versatility with the Yamaha PX5 Class D Power Amplifier. This innovative amplifier boasts a newly developed Class-D engine with a custom LSI, delivering 2x800W at 4Ω for crystal-clear sound reproduction. Equipped with onboard DSP, enjoy flexible control over PEQ, crossover, filters, delay, and limiter functions to tailor your audio experience. The Yamaha Speaker presets ensure optimised sound performance, while the utilities guarantee safe and secure operation. Ideal for a wide range of sound reinforcement applications, this power amp offers 2x500W at 8Ω and 2x800W at 4Ω, making it a powerhouse in the audio industry.Key Features:- Power Output: 2x 500W at 8Ω, 2x 800W at 4Ω- Newly developed Class-D amplifier engine with a custom LSI- Onboard DSP for PEQ, crossover, filters, delay, and limiter functions- Yamaha Speaker presets for optimised sound performance- Utilities for safe and secure operationProduct Specifications General Internal Sampling Frequency rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output portsNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2 OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power consumption 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

Read more less

Unleash the power of professional sound reinforcement with the Yamaha PX3 Class D Power Amplifier. Delivering an impressive 2x500W at 4Ω, this amplifier boasts a newly developed Class-D engine with custom LSI for top-notch performance. Equipped with flexible onboard PEQ, crossover, filters, delay, and limiter functions, the PX3 ensures precise audio control. Benefit from Yamaha Speaker presets and utilities for secure operation. The Yamaha PX3 is the go-to choice for versatile power amplification needs.Product Features:- 2x 300W at 8Ω / 2x 500W at 4Ω- Newly developed Class-D amplifier engine with custom LSI- Flexible onboard PEQ, crossover, filters, delay, and limiter functions- Yamaha Speaker presets- Utilities for safe and secure operationProduct Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total Harmonic Distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency Response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) Maximum Input Voltage: +24dBu Input Impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

Read more less

Experience unparalleled power and reliability with the Void Acoustics Bias Q2 4-Channel Power Amplifier. This premier-grade amplifier delivers 4x1200W @ 4Ω in just 1U of space, offering smaller dimensions and lighter weight without compromising on sound quality. The microprocessor-controlled power supply with built-in PFC ensures flawless worldwide operation, and the patented SRM technology guarantees responsiveness in any operating condition. Compatible with lo-Z and 70V/100V distributed lines, this amplifier allows for versatile output load configurations while maintaining impressive sound quality and reliability.Product Features:- Number of Channels: 4- Output: 1500W @ 2 Ω, 1200W @ 4 Ω, 1200W @ 8 Ω- Output Bridged: 3000W @ 4 Ω, 2400W @ 8 Ω- Smaller dimensions and lighter weight in just 1 RU- Highly efficient microprocessor-controlled power supply- Patented Smart Rails Management technology- Works with lo-Z (from 2 Ω) and 70V/100V distributed lines Product Specifications Number of Channels: 4 Output: 1500 W @ 2 Ω, 1200 W @ 4 Ω, 1200 W @ 8 Ω Output bridged: 3000 W @ 4 Ω, 2400 W @ 8 Ω Height: 44.5 mm (1.75”) Width: 483 mm (19”) Depth: 358 mm (14.1”) Weight: 7 kg (15.4 lb)

Read more less

Experience unparalleled power and reliability with the Void Acoustics Bias Q1 DSP 4-Channel Power Amplifier. Featuring premier-grade power and headroom in a compact one rack unit design, this amplifier ensures optimal performance for any sound system. With smaller dimensions and a lighter weight than its counterpart, the Bias Q5, this amplifier delivers exceptional sound quality backed by patented SRM (Smart Rails Management) technology. The highly efficient, microprocessor-controlled power supply with built-in PFC guarantees flawless operation worldwide. The Bias Q1 works seamlessly with low impedance (from 2 Ω) as well as 70V/100V distributed lines, allowing for versatile connectivity options. Elevate your sound system with the Void Acoustics Bias Q1 DSP 4-Channel Power Amplifier.Specifications:- Number of Channels: 4- Output: 300 W @ 8 Ω, 300 W @ 4 Ω, 400 W @ 2 Ω- Output Bridged: 800 W @ 4 Ω, 600 W @ 8 Ω- Dimensions: Height 44.5 mm (1.75”), Width 483 mm (19”), Depth 358 mm (14.1”)- Weight: 7 kg (15.4 lb) Product Specifications Number of Channels: 4 Output: 300 W @ 8 Ω, 300 W @ 4 Ω, 400 W @ 2 Ω Output bridged: 800 W @ 4 Ω, 600 W @ 8 Ω Height: 44.5 mm (1.75”) Width: 483 mm (19”) Depth: 358 mm (14.1”) Weight: 7 kg (15.4 lb)

Read more less

Experience the pinnacle of audio performance with the Void Acoustics Bias Q1 4-Channel Power Amp with DSP. This amplifier combines compact design with uncompromising sound quality, making it an ideal choice for various venues. With unparalleled power and performance, the Bias Q1 ensures crystal-clear audio delivery that will captivate your audience. Equipped with cutting-edge technology and a microprocessor-controlled power supply, this amplifier offers exceptional reliability in any operating condition. Elevate your sound setup with the Bias Q1 and immerse your audience in a world of unparalleled audio excellence.Key Features:- 4 channels with 4x300W @ 4Ω output- DANTE compatible- Built-in DSP for superior sound control- Compact 1U design, perfect for space-constrained venues- Highly efficient power supply with built-in PFC- Compatible with lo-Z and 70V/100V distributed lines- Patented SRM (Smart Rails Management) technology for optimal performance

Read more less

Immerse yourself in professional audio excellence with the Void Acoustics Bias D1 2-Channel Power Amp with DSP. This powerhouse amplifier, delivering 800W per channel at 4Ω, ensures a robust and dynamic sound experience that will elevate your audio setup to new heights. Benefit from advanced DSP functionality, offering precise control over your audio output with sound shaping and limiter functions. The Bias D1 is not only powerful but also environmentally conscious, boasting eco-friendly and energy-efficient operation to reduce costs and minimise its carbon footprint.Specifications:- Power Output: 800W per channel @ 4Ω- Channels: 2 - DSP Functionality: Advanced system management features including sound shaping and limiter functions- Eco-Friendly Design: Minimal operational costs and reduced carbon footprint- Operating Voltage: 100V- Size: 1U Product Specifications Number of channels: 2 Output per channel: 1000 W @ 2 Ω, 800 W @ 4 Ω, 800 W @ 8 Ω Output bridged: 2000 W @ 4 Ω, 1600 W @ 8 Ω Height: 44.5 mm (1.75 “) Width: 483 mm (19 “) Depth: 358 mm (14.1 “) Weight: 7 kg (15.4 lb)

Read more less

Experience the pinnacle of professional audio excellence with the Void Acoustics Bias D1 2-Channel Power Amp featuring a fully integrated, cutting-edge DSP. Designed to provide exceptional audio performance, this powerhouse amplifier ensures a seamless setup process, allowing you more time to revel in the unparalleled sound quality it delivers. The integrated DSP offers comprehensive system management functionality, empowering you to customise your audio output effortlessly to meet your exact requirements. Championing eco-friendly design principles, the Bias D1 remains energy-efficient, keeping operational costs minimal and reducing its carbon footprint. With innovative sound shaping and limiter functions enhancing your audio experience, this amplifier gives you complete control over every aspect of your sound system. The Void Acoustics Bias D1 is engineered to adapt to any configuration, working seamlessly with lo-Z or 70V/100V distributed lines, making it ideal for a broad range of applications in installed sound reinforcement systems. Its compatibility with Dante digital audio networking architecture and cutting-edge signal processing ensures that your audio setup is future-proof and ready to meet the demands of modern technology. Elevate your audio setup to new heights, immerse yourself in a world of unparalleled sound quality and control with the Void Acoustics Bias D1.Specifications:- Channels: 2- Power Output: 2x800W @ 4Ω- DSP: Integrated- Connectivity: DANTE- Rack Unit: 1U

Read more less

Experience unparalleled audio performance with the TOA P-2240 100V Booster Amplifier 240W from the A2000 Series. This power amplifier offers a remarkable high performance-to-cost ratio, making it an ideal choice for diverse audio applications in schools, churches, offices, and retail stores. With a wide range of power outputs from 30W to 240W, this amplifier caters to various audio needs, ensuring compatibility with different requirements. The balanced mic inputs enhance noise isolation and durability, setting it apart from conventional models. Designed to meet the demands of commercial audio systems, the TOA P-2240 amplifier provides a comfortable acoustic space with tone control features at bass and treble frequencies for sound customisation. Its scratch and fingerprint-resistant finish, along with easy volume control and both AC and DC operation options, offer convenience and versatility. The TOA P-2240 100V Booster Amplifier 240W is built for long-lasting performance, even in challenging environments. Elevate your audio experience with the optional accessory MB25B Rack Kit for seamless integration.Key Features:- Power Output: 240W- Balanced Mic Inputs- Tone Control Feature- AC/DC Operation Options- Scratch and Fingerprint-Resistant FinishProduct Specifications General Power Source: 220 - 240V AC or 24V DC Rated Output: 240W Power Consumption: 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output) Frequency Response: 50 - 20,000Hz (+/- 3 dB) Distortion: Under 1% at 1kHz,1/3 rated power Input: MIC 1: -60db 600Ω, electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω, electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) Output: SPEAKER OUT:Balanced (floating). HIGH IMPEDANCE:42W (100V). LOW IMPEDANCE: 4Ω (31V). REC. OUT: Odb, 600Ω unbalanced, RCA pin jack Phantom Power: DC + 21V (MIC 1) S/N Ratio: Over 60dB Tone Control: Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz Muting: MIC1: Mutes other signals by 0 - 30 dB attenuation Indicator: Power signal, peak Finish: Panel: ABS resin, black. Case: Steel plate, black Physical & Dimensions Width: 420mm Height: 100.9mm Depth: 360.3mm Weight: 13kg

Read more less

Step up your audio game with the Studiomaster ISA4150 Power Amplifier. Delivering an impressive 4 x 150W of power, this amplifier guarantees a dynamic and clear sound experience for your audience. Whether you're using it in a commercial setting with 70/100V line operation or connecting it to low impedance speakers at 4-16 ohms, the ISA4150 offers versatility like no other.Experience peace of mind with the built-in protection circuits that safeguard against short circuits, overheating, and overloads, indicated by LED lights for easy monitoring. The automatic two-speed temperature control fan ensures optimal cooling efficiency, while the compact all-steel enclosure adds durability and a sleek aesthetic to your audio setup.Don't settle for anything less than exceptional sound quality and reliability. Elevate your audio system with the Studiomaster ISA4150 Power Amplifier and enjoy powerful performance that exceeds expectations.Specifications:- Power Output: 4 x 150W- Suitable for: 70/100V and 4-16 ohms- Protection Circuits: Short circuit, overheating, overload- Cooling System: Two-speed temperature control fan- Enclosure Material: All-steel constructionProduct Specifications Rated output power: 4 x 150W Output mode: Balanced 4-16Ω, 70V & 100V Input: 10KΩ, 1.2V, unbalanced Frequency: 60Hz-18kHz Distortion at 1kHz, 1/3 rated power: Less than 0.1% SNR: Input1, 80Db Protection: AC fuse, DC voltage Overload, Short circuit Heat dissipation: Stepless fan Power supply: AC220V/50Hz Rated power consumption: 220W Dimension (LxWxH): 484x460x88mm

Read more less

Experience unparalleled power and efficiency with the Studiomaster HX4-1800 Digital Power Amplifier. Delivering an impressive 4 x 765W @ 4Ω, this amplifier is a high-performance powerhouse designed for demanding installations, conferences, entertainment events, and smaller touring applications. Benefit from its energy-efficient design featuring high efficiency and power factor correction (PFC), ensuring reliable operation down to 2ohm loads while saving on energy costs. The HX series possesses a robust set of protection mechanisms, including thermal, overload, and DC protection, guaranteeing the safety and longevity of your amplifier. This compact 1U amplifier is versatile and convenient with variable speed fan cooling, status and protection indicators, multiple gain modes, and balanced XLR inputs. Elevate your audio experience with the Studiomaster HX4-1800 Digital Power Amplifier, combining exceptional performance, efficiency, and reliability in a sleek and affordable package.Key Specifications:- Power Output: 4 x 765W @ 4Ω- Energy-efficient design with Power Factor Correction (PFC)- Comprehensive protection features including thermal, overload, and DC protection- Reliable operation down to 2ohm loads- Compact 1U size with variable speed fan coolingProduct Specifications 8ohms Stereo: 4x450watts 4ohms Stereo: 4x765watts 2ohms Stereo: 4x1300watts 16ohm Bridged: 2x900watts 8ohm Bridged: 2x1530watts 4ohm Bridged: 2x2600watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD) 483mm x 44mm x 323mm Net Weight: 5.7kg

Read more less

Upgrade your audio setup with the Studiomaster HX4-1400 Digital Power Amplifier. This powerful amplifier, with its 4 x 595W @ 4Ω output, is a game-changer in the world of sound reinforcement. Perfect for demanding installations, conferences, entertainment events, and smaller touring applications, the HX4-1400 boasts impressive power and performance that ensures crystal-clear sound quality every time. The energy-efficient design of this amplifier includes high efficiency and power factor correction (PFC), resulting in reliable and efficient operation even at lower loads down to 2ohms.The HX series, to which this amplifier belongs, offers versatile and reliable features such as multiple gain modes, stereo/parallel/bridge modes, comprehensive protection, and status indicators. Whether you are in need of flexibility for different audio setups or peace of mind regarding the safety of your equipment, the HX4-1400 delivers exceptional sound quality and unmatched reliability.Experience the perfect blend of power, efficiency, and versatility with the Studiomaster HX4-1400 Digital Power Amplifier. Elevate your sound system to new heights with this compact yet mighty device that is designed for professionals who expect nothing but the best.Specifications:- Power Output: 4 x 595W @ 4Ω- Energy Efficiency: High efficiency and power factor correction (PFC)- Load Compatibility: Operates down to 2ohms- Gain Modes: Multiple options available- Operating Modes: Stereo/Parallel/Bridge- Protection Features: Comprehensive protection mechanisms- Status Indicators: Keep track of performance and safety easilyProduct Specifications 8ohms Stereo: 4x350watts 4ohms Stereo: 4x595watts 2ohms Stereo: 4x1015watts 16ohm Bridged: 2x700watts 8ohm Bridged: 2x1190watts 4ohm Bridged: 2x2030watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD) 483mm x 44mm x 323mm Net Weight: 5.7kg

Read more less

- High Performance: The Studiomaster HX4-600 Digital Power Amplifier delivers exceptional power output, with 4 x 225W @ 4Ω, ensuring a robust and clear sound quality for your audio setup.- Energy Efficient Design: This amplifier features an energy-saving design with high efficiency and power factor correction (PFC), allowing for reliable and efficient operation even at low loads down to 2ohms.- Versatile and Reliable: With multiple gain modes, stereo/parallel/bridge modes, and comprehensive protection indicators, the HX4-600 is perfect for demanding installations, conferences, entertainment events, and smaller touring applications.Elevate your audio experience with the Studiomaster HX4-600 Digital Power Amplifier. Designed for those who demand top-notch performance in a compact and affordable package, this amplifier is a game-changer for any audio setup. With a power output of 4 x 225W @ 4Ω, you can expect nothing but exceptional sound quality and clarity. The energy-saving design, along with power factor correction (PFC), ensures efficient and reliable operation even at lower loads down to 2ohms. Whether you're setting up for a conference, entertainment event, or a small touring application, the HX4-600 is versatile and reliable, offering multiple gain modes, stereo/parallel/bridge options, and comprehensive protection indicators for peace of mind. Take your audio to the next level with the Studiomaster HX4-600 Digital Power Amplifier.Product Specifications 8ohms Stereo: 4x150watts 4ohms Stereo: 4x255watts 2ohms Stereo: 4x435watts 16ohm Bridged: 2x300watts 8ohm Bridged: 2x510watts 4ohm Bridged: 2x870watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD) 483mm x 44mm x 323mm Net Weight: 5.7kg

Read more less

- Superior Power Output: With 2 x 765W @ 4Ω, the Studiomaster HX2-900 Digital Power Amplifier delivers impressive power for your audio needs.- Energy Efficient Design: Benefit from an energy-saving design with high efficiency and power factor correction (PFC), ensuring optimal performance while reducing power consumption.- Versatile and Reliable: This amplifier offers multiple gain modes, stereo/parallel/bridge modes, and comprehensive protection features, making it a versatile and reliable choice for various applications.Elevate your audio experience with the Studiomaster HX2-900 Digital Power Amplifier. Designed for professionals seeking high performance in a compact form, this amplifier boasts exceptional power output of 2 x 765W @ 4Ω. Whether you're setting up a demanding installation, hosting a conference, or providing entertainment at events, the HX series is your go-to solution for reliable and efficient operation down to 2ohm loads.Enjoy peace of mind with the energy-saving design and high efficiency of this amplifier, featuring power factor correction (PFC) and a universal 90-250V power supply. The variable speed fan cooling system ensures optimal temperature regulation, while the status and protection indicators keep you informed at all times. With balanced XLR inputs, professional speaker connectors, and comprehensive protection against thermal, overload, and DC issues, the Studiomaster HX2-900 Digital Power Amplifier is the perfect blend of power, versatility, and reliability for your audio setup. Elevate your sound quality and performance with this compact yet powerful amplifier.Product Features 8ohms Stereo: 2x450watts 4ohms Stereo: 2x765watts 2ohms Stereo: 2x1300watts 16ohm Bridged: 900watts 8ohm Bridged: 1530watts 4ohm Bridged: 2600watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD): 483mm x 44mm x 323mm Net Weight: 5.0kg

Read more less

Experience unparalleled power and performance with the Studiomaster HX2-700 Digital Power Amplifier. This ultra-lightweight and compact amplifier is designed to meet the needs of professionals in the installation, conference, entertainment, and touring industries. Delivering a robust 2 x 595W output at 4Ω, this amplifier ensures your sound system stands out with clarity and strength. The energy-saving design of the HX2-700, coupled with high efficiency and power factor correction, guarantees optimal performance while saving on energy costs. Its universal 90-250V power supply allows for versatile use in various settings. Whether you're running a conference, setting up an entertainment event, or going on a small tour, this amplifier offers the power and reliability you need in a sleek and affordable package.Equipped with comprehensive protection features, status indicators, and versatile operating modes, including stereo, parallel, and bridge modes, the HX2-700 ensures your sound system is always in top condition. The variable speed fan cooling system keeps the amplifier running smoothly even under heavy loads, while the multiple gain modes provide flexibility in adjusting the audio output to suit your needs.Specifications:- Power Output: 2 x 595W @ 4Ω- Energy efficiency with power factor correction- Universal 90-250V power supply- Comprehensive protection features- Variable speed fan cooling system- Multiple gain modes- Operating modes: stereo, parallel, bridgeProduct Specifications 8ohms Stereo: 2x350watts 4ohms Stereo: 2x595watts 2ohms Stereo: 2x1015watts 16ohm Bridged: 700watts 8ohm Bridged: 1190watts 4ohm Bridged: 2030watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD): 483mm x 44mm x 323mm Net Weight: 5.0kg

Read more less

Step into a world of unparalleled sound quality and performance with the Studiomaster HX2-500 Digital Power Amplifier. Designed for professionals who demand nothing but the best, this amplifier boasts a powerful 2 x 425W @ 4Ω output, guaranteeing crystal-clear audio in any setting. Whether you're setting up for a conference, entertainment event, or a small tour, this amplifier's compact yet high-performance design ensures that you have the power and reliability you need. Not only does the HX2-500 provide exceptional sound quality, but it also incorporates energy-saving features like high efficiency and power factor correction (PFC), making it an environmentally friendly choice that helps you save on energy costs. The amplifier's versatile design allows you to switch between stereo, parallel, and bridge modes, giving you the flexibility to adapt to different setups seamlessly.Safety is paramount, which is why the HX2-500 comes equipped with comprehensive protection features such as thermal, overload, and DC protection, ensuring worry-free operation every time. The amplifier's sleek 1U size, along with its lightweight construction, makes it easy to transport and set up, perfect for on-the-go professionals.Specifications:- Power Output: 2 x 425W @ 4Ω- Size: 1U RackmountProduct Specifications 8ohms Stereo: 2x250watts 4ohms Stereo: 2x425watts 2ohms Stereo: 2x725watts 16ohm Bridged: 500watts 8ohm Bridged: 850watts 4ohm Bridged: 1450watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD): 483mm x 44mm x 323mm Net Weight: 5.0kg

Read more less

Transform your audio experience with the Studiomaster HX2-300 Digital Power Amplifier. Designed for professionals and enthusiasts, this ultra-lightweight and compact amplifier delivers a powerful and clear sound with its 2 x 225W @ 4Ω output. The energy-efficient design, inclusive of power factor correction (PFC) and a universal 90-250V power supply, ensures optimal performance while saving on operational costs. With comprehensive protection features and status indicators, this amplifier offers reliability and peace of mind during performances. The versatility of stereo, parallel, and bridge modes, combined with multiple gain options, makes this amplifier adaptable to various setup requirements effortlessly. Elevate your sound quality, enhance your performance, and enjoy the reliability and flexibility that the Studiomaster HX2-300 Digital Power Amplifier brings to your audio arsenal.Specifications:- Power Output: 2 x 225W @ 4Ω- Size: 1U- Energy-efficient design with power factor correction (PFC)- Universal 90-250V power supply- Comprehensive protection features- Stereo, parallel, and bridge modes- Multiple gain optionsProduct Specifications 8ohms Stereo: 2x150watts 4ohms Stereo: 2x225watts 2ohms Stereo: 2x435watts 16ohm Bridged: 300watts 8ohm Bridged: 510watts 4ohm Bridged: 870watts Slope (1kHz, Bypass LPF): 50V/us Input Sensitivity 1kHz: 1Vrms THD+N (10% rated output power): 0.02% IMD-SMPTE (10% rated output power): 0.05% DIM30 (10% rated output power): 0.05% Crosstalk rejection (less than rated power, 20Hz – 1kHz): >80Db Frequency Response (10% rated output power, 8ohm, 20Hz – 20kHz): 0.2dB Input Impedance: 20k ohm (bal), 10k ohm (unbal) Damping Factor (8ohm, 20Hz – 100Hz): 300 S/N ratio (A weighted, 20Hz-20kHz): 105dB Power supply: 90-260VAC, 50/60Hz Protection: overoad/thermal/DC output protection Dimensions (WxHxD): 483mm x 44mm x 323mm Net Weight: 5.0kg

Read more less

Elevate your audio experience with the RCF IPS3700 2-Channel Class H Power Amplifier. Delivering an impressive 1500W RMS per channel at 4 ohms, this powerhouse amplifier ensures robust and clear sound performance for your audio setup. With versatile configuration options, easily switch between stereo, mono, and bridge modes to meet different audio requirements, providing flexibility in how you use the amplifier for various setups.Experience professional-grade audio amplification with the RCF IPS3700's extensive protective circuits, signal/clip/protect LED indicators, and protection against shorts and open circuits. This amplifier offers high reliability and operational safety, ensuring peace of mind during use. Whether you are setting up a live performance, a recording studio, or a sound reinforcement system, the IPS3700 adapts seamlessly to your needs.Don't settle for anything less than exceptional sound quality and durability. Enhance your sound system with the RCF IPS3700 2-Channel Class H Power Amplifier and enjoy crystal-clear sound reproduction, knowing your equipment is safeguarded.Specifications:- Power Output: 1500W RMS per channel @ 4 ohms- Configuration Options: Stereo, mono, bridge modes- Protective Circuits: Extensive protection against shorts and open circuits- Indicators: Signal/clip/protect LED indicatorsProduct Specifications General Amplifier Specifications Power output stereo 4Ω:1500 W rms Power output stereo 8Ω:1200 W rms Power output bridged 8Ω:3000 W rms Frequency Response -3 dB:20 Hz ÷ 20 kHz Signal/noise rate:100 dB Crosstalk:-75 dB Damping factor:> 200 Slew rate:10V/μS Input Section Input connector:xlr Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ Output Section Output connector:Speakon System Parameters Cooling:Forced Protections:DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current Amplifier class:H Power Requirements Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz Power consumption:800 W Physical & Dimensions Height: 88mm Width: 482mm Depth: 255mm Weight: 16.6kg

Read more less

Immerse yourself in the world of professional audio amplification with the RCF IPS 1.5K 2-Channel Power Amplifier. Delivering 2 x 750 Watts at 4 Ohms impedance, this top-of-the-line amplifier ensures powerful and crystal-clear sound performance for live performances or studio recordings. Thanks to its Class-H power amplification technology, this amplifier guarantees fast response, low distortion, and versatile operation modes including stereo, parallel, and bridge. The IPS 1.5K is further equipped with an extensive protection circuit, variable speed cooling system, and signal, clip, and fault LED indicators to ensure reliable and safe operation under various conditions. Elevate your sound quality, enhance your performance, and unleash the full potential of your audio system with the exceptional features and performance capabilities of the RCF IPS 1.5K 2-Channel Power Amplifier.Specifications:- Power Output: 2 x 750 Watts @ 4 Ohms impedance- Technology: Class-H power amplification- Operation Modes: Stereo, Parallel, Bridge- Protection: Extensive protection circuit- Cooling System: Variable speed cooling- Indicators: Signal, Clip, Fault LED indicatorsProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 750 W @ 4 ohm 2 x 500 W @ 8 ohm 1 x 1500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <73 dB Distortion (THD+N) @ 1 kHz nominal power: <0.02 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 600 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 264 mm / 10.39 inches Weight: 10.5 kg / 23.15 lbs

Read more less

Step into the realm of professional audio amplification with the RCF IPS 2.5K 2-Channel Power Amplifier. Boasting a formidable 2 x 1250 Watts of power output at 4 Ohms impedance, this amplifier is a powerhouse designed to elevate your sound experience to new heights. Equipped with cutting-edge Class-H power technology, this amp ensures fast response and minimal distortion, delivering crisp and clear audio across a wide frequency range. Whether you prefer stereo, parallel, or bridge mode, the IPS 2.5K offers flexibility in connectivity to suit your setup preferences. Safety and reliability are at the core of the IPS 2.5K design, with an extensive protection circuit safeguarding your equipment from potential damage. The variable speed cooling system, along with signal/clip/fault LED indicators, provides peace of mind while ensuring optimal performance even during prolonged use. Elevate your audio setup and immerse yourself in crystal-clear sound with this professional-grade amplifier designed for modern audio environments.Specifications:- Power Output: 2 x 1250 Watts @ 4 Ohms- Amplifier Type: Class-H- Impedance: 4 Ohms- Connectivity Modes: Stereo, Parallel, Bridge- Protection Circuitry: Yes- Cooling System: Variable Speed- LED Indicators: Signal/Clip/FaultProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 1250 W @ 4 ohm 2 x 800 W @ 8 ohm 1 x 2500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <80 dB Distortion (THD+N) @ 1 kHz nominal power: <0.01 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 11.2 kg / 24.69 lbs

Read more less

Step into the realm of professional audio excellence with the RCF IPS 5.0K 2-Channel Power Amplifier. Delivering a potent 2 x 2600W Class-H power output at 4 ohms, this amplifier is engineered to provide exceptional sound quality with rapid response and minimal distortion. Designed for professional audio setups, the RCF IPS 5.0K excels in versatility and reliability, offering stereo, parallel, and bridge modes to accommodate various audio needs. Safety is a top priority with this amplifier, featuring an elaborate protection circuitry that safeguards against short circuits, thermal issues, and DC faults. Each channel of the amplifier is equipped with a limiter, providing precise control over the audio output. The variable speed cooling system, in conjunction with high-efficiency heat sinks and fans, ensures optimal performance even in challenging thermal conditions. Key Specifications:- Power Output: 2 x 2600W @ 4Ω- Class: Class-H- Modes: Stereo, Parallel, Bridge- Protection Circuitry: Short Circuit, Thermal, DC Protections- Cooling System: Variable Speed Cooling System- Connectors: Stereo XLR Input and Output, speakON, Binding Post Output- Indicators: Signal/Clip and Fault LED IndicatorsElevate your audio setup with the RCF IPS 5.0K 2-Channel Power Amplifier and experience unparalleled power, versatility, and reliability in every performance.Product Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 2600 W @ 4 ohm 2 x 1500 W @ 8 ohm 1 x 5200 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.04 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1800 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 21.6 kg / 47.62 lbs

Read more less

Elevate your audio experience with the RCF QPS 10K 4-Channel Class HD Power Amplifier. This professional amplifier delivers an impressive 4 x 2,500 W of power at 2 Ohms, ensuring a powerful and high-quality sound output. With a design focused on safety and longevity, the QPS 10K features comprehensive protection circuits against shorts, open circuits, and thermal issues. Its variable speed cooling system, alongside high-efficiency heat sinks and fans, guarantees reliability even in challenging environments. Versatile and precise, this amplifier offers independent gain control, signal/clip and fault indicators, and XLR output links for channels A and C, providing you with full control over your audio output. Choose from stereo, parallel, and bridge modes to suit various setups and requirements. Invest in the RCF QPS 10K for cutting-edge power amplification technologies, reliability, and superior sound quality.Important specifications:- Power: 4 x 2,500 W @ 2 Ohms- Protection circuits: Shorts, open circuits, thermal issues- Cooling system: Variable speed with high-efficiency heat sinks and fans- Operation modes: Stereo, parallel, bridgeProduct Specifications Amplifier specifications Amplifier Class: HD Output power: 4 x 2500 W @ 2 ohm 4 x 2200 W @ 4 ohm 4 x 1400 W @ 8 ohm 2 x 5000 W @ 4 ohm (bridge) 2 x 4400 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 20000 Hz SNR Analog inputs (“A” weighted): >110 dB Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.05 % Input section Total number of inputs: 4 Balanced: 4 Mono: 4 Line inputs: 4 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Speakon Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Handles: Metal handles included in the front panel Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 483 mm / 19.02 inches Depth: 399 mm / 15.71 inches Weight: 14.2 kg / 31.31 lbs

Read more less

Unleash the power and precision of the Optimal Audio Amp 300 2x1350W @ 4Ω AB Performance Power Amplifier 2U in your audio setup. This robust amplifier is designed to drive Cuboid and Sub loudspeakers within the Optimal Audio ecosystem, offering uncompromising sound quality and performance. With a reliable Class A/B design delivering 1350 watts per channel into 4Ω, this amplifier ensures a clear and dynamic audio experience. Choose between Stereo, Bridge, or Parallel mode for versatile installation options tailored to your specific needs.Take control of your sound system with the Amp 300's seamless integration with the Zone processor, allowing you to maximise performance through the onboard WebApp. Configure amplifier settings effortlessly and access a variety of Optimal Audio loudspeaker presets and limiters for a customised sound experience. Equipped with flexible input connectors and front panel status monitoring, the Amp 300 combines functionality with ease of use, making it an essential component for your audio setup.Specifications:- Power: 1350 watts per channel into 4Ω- Operation Modes: Stereo, Bridge, Parallel- Design: Class A/B- Compatibility: Cuboid and Sub loudspeakers- Integration: Zone processor with WebApp control- Connectivity: Flexible input connectors- Monitoring: Front panel status monitoringProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Elevate your audio experience with the Optimal Audio Amp 200, a top-of-the-line performance power amplifier designed to provide unparalleled quality and performance. With a reliable Class A/B design, this amplifier delivers an impressive 700 watts per channel into 4Ω, ensuring crystal-clear sound quality and powerful performance. Whether you're setting up a stereo system, bridging multiple speakers, or running them in parallel, the Amp 200 offers versatile functionality with Stereo, Bridge, and Parallel modes to suit your specific needs. Crafted with a compact 2U design, this amplifier is not only powerful but also durable, making it ideal for various installation applications. The intuitive front panel design, complete with indicator LEDs for each amplifier channel, allows for easy monitoring and control. Enhance your audio setup with seamless connectivity through balanced XLR / 1/4” Jack 'Combi' line inputs and speakON® or binding post outputs. Combine the Amp 200 with a Zone processor for maximum performance and unlock a full suite of Optimal Audio loudspeaker presets, limiters, and more, easily configurable via Zone's onboard WebApp. Take your sound experience to new heights with the Optimal Audio Amp 200 and enjoy exceptional quality, flexibility, and performance in every note.Specifications:- Power Output: 700 watts per channel into 4Ω- Design: Class A/B- Modes: Stereo, Bridge, Parallel- Connectivity: XLR / 1/4” Jack 'Combi' line inputs, speakON® or binding post outputs- Compatibility: Zone processor integrationProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Introducing the Optimal Audio Amp 100 2x350W @ 4Ω AB Performance Power Amplifier 2U, a powerhouse of performance and reliability designed to elevate your sound system to professional levels. This Class A/B amplifier delivers 350 watts per channel into 4Ω, ensuring a crisp and powerful audio experience that envelops you in exceptional sound quality. The Amp 100 features a versatile design with Stereo, Bridge, and Parallel modes, providing flexibility for various installation applications. Seamlessly tailor your audio setup with a switch on the rear panel and experience the freedom to control your sound environment.Elevate your audio system by combining the Amp 100 with a Zone processor, unlocking access to a range of Optimal Audio loudspeaker presets, limiters, and more. Easily configure these settings through Zone's onboard WebApp, enhancing the versatility and control over your sound output. The Amp 100 boasts a compact and rugged 2U design, with a user-friendly front panel that includes indicator LEDs for monitoring each amplifier channel. Connect effortlessly with balanced XLR / 1/4" Jack 'Combi' line input connectors and Speakon / binding post outputs, ensuring seamless connectivity for professional audio installations.Unleash the full potential of your sound system with the Optimal Audio Amp 100, and immerse yourself in a world of superior audio quality and performance. Perfect for anything from small venue setups to large events, this amplifier offers the reliability and power you need to take your sound to the next level.Key Specifications:- Power Output: 350 watts per channel into 4Ω- Connectivity: Balanced XLR / 1/4" Jack 'Combi' line input connectors, Speakon / binding post outputsProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 350W / 8Ω: 250W / 8Ω Bridged: 700W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 102dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

- Drive both conventional low impedance and 70V-100V loudspeaker loads- Internal DSP presets for Optimal Audio loudspeakers- Energy Star Compliant with Power Factor Correction technologyImmerse yourself in unparalleled audio performance with the Optimal Audio SmartAmp 30 4x250W Amplifier with Integral DSP 100V 1U. This powerhouse amplifier is designed to elevate the sound quality of Optimal Audio loudspeakers to new heights. Here's why you need to add this cutting-edge amplifier to your audio setup:1. Tailored Sound Experience: With internal DSP presets specifically crafted for Optimal Audio loudspeakers, the SmartAmp 30 ensures that you experience audio exactly as the creators intended. Enjoy optimised EQ settings and overload protection for a superior listening experience.2. Versatile Compatibility: Whether you're looking to power low impedance or 70V-100V line loudspeaker loads, the SmartAmp 30 has you covered. Its four channels deliver a maximum of 250W per channel, allowing you to create a customised speaker system tailored to your space and preferences.3. Energy Efficient Performance: Say goodbye to market-specific power regulation concerns with the SmartAmp 30's Power Factor Correction technology. This Energy Star Compliant amplifier offers universal AC mains operation and ultra-low standby power consumption, ensuring consistent and reliable power delivery wherever you are.Upgrade your audio setup with the Optimal Audio SmartAmp 30 4x250W Amplifier and immerse yourself in a world of crystal-clear sound and unparalleled performance. Elevate your listening experience to new heights with the perfect combination of power, precision, and efficiency.Product Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 250W 70V-100V OUTPUT: 4 x 250W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 300W HEAT GENERATED: 1080 kJ per hour DIMENSIONS: (W) 440mm x (H) 44mm x (D) 308mm (W) 17.32” x (H) 1.73” x (D) 12.13” WEIGHT: 3.6kg (7.9lbs)

Read more less

Immerse yourself in the world of unparalleled audio quality with the Optimal Audio SmartAmp 20 4x125W Amplifier with Integral DSP. This powerhouse of an amplifier is meticulously crafted to drive Optimal Audio loudspeakers to their full potential, offering a versatile power output and power-sharing technology. Elevate your listening experience to new heights with built-in Digital Signal Processing (DSP) tailored to enhance the performance of Optimal Audio loudspeakers. The SmartAmp 20 provides signal processing presets specifically designed for Optimal Audio loudspeakers, ensuring the perfect sound balance effortlessly. The sleek half-width, 1U, 19” rack housing allows for space-efficient mounting of multiple units, providing up to 8 channels in a single 1U space. Enjoy the convenience of internal DSP presets selected via switches at the rear of the amplifier, enabling the ideal EQ and overload protection settings for your speakers. With Power Factor Correction power supply technology, the SmartAmp 20 ensures consistent, regulated power delivery worldwide, offering ultra-low standby power consumption for energy efficiency. Transform your audio setup with the Optimal Audio SmartAmp 20, where cutting-edge technology meets exceptional sound quality.Specifications:- Amplifier Type: 4-channel- Power Output: 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads- Maximum Output: 250W- Half-width, 1U, 19” rack housing- Power Factor Correction power supply technology- Internal DSP presets selected via switchesProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 125W 70V-100V OUTPUT: 4 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 150W HEAT GENERATED: 540 kJ per hour DIMENSIONS (W) 220mm x (H) 44mm x (D) 353mm (W) 8.67” x (H) 1.73” x (D) 13.90” WEIGHT: 2.4kg (5.3lbs)

Read more less

Experience cutting-edge audio performance with the Optimal Audio SmartAmp 10 2x125W Amplifier with Integral DSP 100V Half-Rack 1U. This powerful amplifier is meticulously designed to enhance your sound system to exceptional levels. The 2 x 125W power output effortlessly drives both low impedance and 70V-100V line loudspeaker loads, delivering outstanding sound quality and clarity. Its built-in Digital Signal Processing (DSP) features tailored presets for Optimal Audio loudspeakers, ensuring optimal performance with a simple switch setting. Equipped with power sharing technology, the SmartAmp 10 can deliver up to 250W from a single channel, providing flexible power distribution according to your system requirements. The half-width, 1U design allows for convenient desktop or rack mounting, while the universal mains operation and Power Factor Correction power supply technology ensure consistent power regulation globally. Energy Star compliant for efficiency, the SmartAmp 10 offers unparalleled audio performance, flexibility, and efficiency in one sleek package.Specifications:- Power Output: 2 x 125W- Loudspeaker Load Compatibility: Low impedance and 70V-100V line- Digital Signal Processing (DSP): Yes- Power Sharing Technology: Yes- Design: Half-width, 1U- Power Supply: Universal mains operation with Power Factor Correction- Energy Efficiency: Energy Star compliantProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 2 x 125W 70V-100V OUTPUT: 2 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 2 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 75W HEAT GENERATED: 270 kJ per hour DIMENSIONS: (W) 220mm x (H) 43.9mm x (D) 277mm (W) 8.67” x (H) 1.73” x (D) 10.91” WEIGHT: 1.9kg (4.2lbs)

Read more less

Elevate your audio experience to new heights with the NEXO DTDAMP4X1.3C 4Ch Power Amp. Designed as the optimal companion for NEXO speakers backed by the DTD Controller, this power amplifier delivers a robust and crystal-clear sound performance. Featuring 4 channels capable of providing 4x1250W at 4Ω, this amplifier ensures a powerful audio output for your setup. The NEXO DTDAMP4X1.3C offers versatile bridging options allowing channels to be independently bridged two by two, providing flexibility in configuring your audio system. It boasts an ultra-efficient Switch Mode power supply and amplifier channel design for superior performance. The extensive protection features safeguard your equipment against mains over/undervoltage, temperature fluctuations, and DC outputs, ensuring the longevity and safety of your audio system. Ideal for powering mobile setups or fixed installations of NEXO ID and PS Series systems, the NEXO DTDAMP4X1.3C is available in two models: one delivering 4 x 700 Watts and another providing 4 x 1300 Watts at 4 Ohms. Specifications:- Channels: 4- Power Output: 4x1250W @ 4Ω- Bridging Options: Independent bridging two by two- Protection Features: Comprehensive protection against mains over/undervoltage, temperature fluctuations, and DC outputs- Power Supply: Switch Mode- Amplifier Channel Design: High-efficiency designProduct Specifications Power Number of channels:4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 135 Volts Max. output power (4 x 8 Ohms): 4 x 750 Watts Max. output power (4 x 4 Ohms): 4 x 1300 Watts Max. output power (2 bridge x 8 Ohms): 2 x 2600 Watts Audio Characteristics Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +8 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Back Panel Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Front Panel Features Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains Requirements Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 900 Watts Power consumption 1/4 max. / 4 Ohms: 1800 Watts Physical Specifications Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Operating temperature range: 0°C - 45 °C Certifications CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC Ordering Information Pre-configured for 230 volts mains: DTDAMP4x1.3C Pre-configured for 120 volts mains: DTDAMP4x1.3U

Read more less

Elevate your audio setup to new heights with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier. Tailored as the ultimate companion for NEXO speakers with DTD Controller support, this 4-channel amplifier is a game-changer for professional audio environments. Boasting a high-efficiency Switch Mode power supply and Amplifier channel design, the DTDAMP4X0.7C ensures unmatched sound quality and reliability for your performances. With comprehensive protection features such as mains over/undervoltage, temperature monitoring, and DC outputs protection, this amplifier offers peace of mind during every use. Despite its powerful capabilities, this lightweight and compact 1U rack unit weighing only 7.5 Kg is perfect for mobile setups. The variable-speed cooling system guarantees quiet operation while enhancing performance. Simplify your setup, unleash your NEXO speakers' full potential, and experience a new level of audio precision with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier.Specifications:- Power: 4x700W @ 4Ω- Weight: 7.5 Kg- Size: 1U RackProduct Specifications General Number of channels: 4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 85 Volts Max. output power (4 x 8 Ohms): 4 x 360 Watts Max. output power (4 x 4 Ohms): 4 x 700 Watts Max. output power (2 bridge x 8 Ohms): 2 x 1400 watts Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +5 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 580 Watts Power consumption 1/4 max. / 4 Ohms: 1100 Watts Physical Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Other Operating temperature range: 0°C - 45 °C CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC

Read more less

Experience unparalleled sound quality with the NEXO NXAMP4X4C MK2 4Ch Power Amp and Controller. Developed through the exceptional collaboration between NEXO and Yamaha, this state-of-the-art device brings a revolution in audio performance. Delivering a robust 4 x 4500 Watts output, this 4U unit features advanced signal processing and ultra-low distortion Class D amplifiers, ensuring an exceptional auditory experience. The large colour touchscreen on the front panel provides easy access to all essential parameters, making setup effortless. Whether for fixed installations or touring, this powered controller offers flexibility, convenience, efficiency. Elevate your sound system to new heights with the NEXO NXAMP4X4C MK2, providing remarkable clarity and detail in sound reproduction. With 24-bit/96KHz converters and 64-bit signal processing, enjoy articulate and rich performance from solid bass to impressive high-end definition. Even at low volumes, the sound remains transparent and pure, enhancing the audience experience. Specifications:- Power output: 4 x 4500 Watts- Signal Processing: 64-bit- Converters: 24-bit/96KHz- Amplifier Type: Class D- Touchscreen: Large Colour Touchscreen- Unit Size: 4UProduct Specifications Power Specifications Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 180 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 3300 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 4500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 6600 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 9000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 18 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Latency: 580 us on a flat setup Audio AD and DA converters: 24-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs

Read more less

Experience the pinnacle of sound quality with the NEXO NXAMP4X2MK2 4Ch Power Amp Controller. This powerhouse of a power amp controller is a collaborative creation between NEXO and Yamaha, designed to ensure top-notch sound quality for NEXO loudspeaker systems. Boasting cutting-edge technology, this controller features 4 ultra-low distortion Class D amplifiers, each delivering a whopping 2500 Watts of power, setting a new standard in sound reinforcement.The user-friendly interface of the NEXO NXAMP4X2MK2, with all essential parameters easily accessible via a large colour touchscreen on the front panel, provides a seamless setup experience for both fixed installations and touring. Elevate your sound system with this power amp controller and immerse your audience in a whole new level of audio excellence.Key Specifications:- Brand: NEXO- Power: 4x2500W- Amplifier Type: Class D- Interface: Colour touchscreen- Application: Fixed installations, touringProduct Specifications Power Specifications: Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 140 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1200 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 2500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 3800 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 5000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 16 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Lantency: 550 us on a flat setup Audio AD and DA converters: 32-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs Back Panel features: Analogue audio inputs: 4x balanced analogue inputs on XLR3 Power outputs: 4×Neutrik Speakon NL-4 outputs RS232 port: 1×DB-9 connector dedicated for DPU connection GPIO port: 1ｘDB-25 connector with 5x Inputs and 8x Outputs for DMU connection Expansion slot: For networking and digital audio cards, 4x digital audio inputs and remote control Main sockets: 1x Neutrik Powercon NAC3 (1x 20 A) User interface and controls: Front panel buttons and knobs: Rotary encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGZ, 480 x 272 Main requirements: Mains voltage: Universal power supply with active PFC 100-240 Volts (50/60 Hz) Mains voltage: Power consumption（1/4 max 2 Ω）: 3500 W Dimensions and Certifications: Dimensions: 2U 19" rack, 502mm / 20" depth, 16.1 kg / 35.3 lbs weight Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Elevate your audio experience with the NEXO NXAMP4X1MK2 4Ch Power Amp Controller 4x1300W 2U. This powerhouse amplifier boasts cutting-edge features that deliver unparalleled sound quality and precise control. The advanced Array-EQ User EQ allows for up to 8 bands per channel, ensuring a tailored sound experience with every note heard exactly as intended. Equipped with ultra-low distortion Class D amplifiers and 32-bit/96KHz converters, this amplifier produces crystal-clear sound reproduction with solid bass and impressive high-end definition. With two layers of mute options, Voltage and Protection Meters, and seamless integration with three new multi-core DSPs, fine-tuning your audio setup has never been easier. Future-proofed hardware ensures potential firmware updates and continuous relevance over the years. Take your sound system to the next level with the NEXO NXAMP4X1MK2 Power Amp Controller.Specifications:- Power: 4x1300W- Amplifier Type: Class D- Number of Channels: 4- EQ Bands per Channel: Up to 8- Converters: 32-bit/96KHz- Signal Processing: 64-bit- Interface: Remote Control- Connectivity: Versatile OptionsProduct Specifications Power Specifications Number of amplifiers channels: 4 x amplifiers channels, 2 by 2 bridgeable Max. output voltage (no load): 4 x 105 Volts 4 x 140 Volts Max. output power (4 channels mode/8 Ohms load per channel): 4 x 600 Watts 4 x 1200 Watts Max. output power (4 channels mode/4 Ohms load per channel): 4 x 900 Watts 4 x 1900 Watts Max. output power (4 channels mode/2 Ohms load per channel): 4 x 1300 Watts 4 x 2500 Watts Max. output power (2 channels mode/8 Ohms load per channel): 2 x 1800 Watts 2 x 3800 Watts Max. output power (2 channels mode/4 Ohms load per channel): 2 x 2600 Watts 2 x 5000 Watts Power consumption (Standby): 10 Watts Power consumption (Idle): 200 Watts Input to Power Out Frequency response: +/-0.5 dB from 10 Hz to 20 KHz Input Impedance / Max. level: 22 K Ω / +25 dBu Dynamic Range / TDH + N: 107 dB unweighted / Typical 0.1% on a flat setup Latency: 550 us on a flat setup Audio AD and DA Converters: 32 bits @ 96 KHz Processing: 3 x multicore 64 bits processing DSPs Back Panel Features Analogue audio inputs: 4 x balanced analogue inputs on XLR3 Power outputs: 4 x Neutrik Speakon NL-4 outputs RS232 port: 1 x DB-9 connector dedicated for DPU connection GPIO port: 1 x DB-25 connector with 5 x inputs and 8 x outputs or for DMU connection Expansion slot: For networking and digital audio cards, 4 x digital audio inputs and remote control Mains sockets: 1 x Neutrik Powercon NAC3 (1 x 20 A) User Interface And Controls Front panel buttons and knobs: Rotary Encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGA, 480 x 272 Mains Requirements Mains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50/60/Hz) Power consumption 1/4 max. 2 Ohms: 1900 Watts 3500 Watts Physical & Dimensions Height: 2U 19" Rack Depth: 506 mm Weight: 15.7 Kg Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Elevate your audio experience to new heights with the Martin Audio VIA5002 2 Channel Class D Power Amplifier. Designed for professional audio setups, this advanced amplifier embodies the perfect blend of power and efficiency. Ideal for live events, venues, and portable sound systems, the VIA5002 boasts a total power output of 5000 Watts, making it the ultimate choice for powering subwoofers and delivering exceptional sound quality.With 2 x 2500W into 4 ohms, this power amplifier ensures a seamless audio performance. The VIA5002 is not only powerful but also energy-efficient, thanks to its high efficiency design that minimizes energy consumption. Its lightweight and compact 2U rack height construction make it a breeze to transport and install, perfect for on-the-go sound setups. The comprehensive protection systems, including signal and clip limiter LEDs, guarantee safe operation and full output capability even in challenging environments with temperatures up to 40°C.Experience crystal-clear sound and reliable performance with the Martin Audio VIA5002. Key specifications:- Total Power Output: 5000 Watts- Power Output: 2 x 2500W @ 4 ohms- Rack Height: 2U- Temperature Resistance: up to 40°CProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT: 2 x 2500W into 4 ohms 2 x 1600W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience with the Martin Audio VIA5004 4 Channel Class D Power Amplifier. This powerful amplifier is designed to deliver unparalleled power and performance for small to medium-scale installations and portable sound applications. With four channels of efficient Class D amplification, this advanced amplifier offers a total power output of 5000 Watts, ensuring exceptional sound quality in demanding environments. The VIA5004 can deliver 4 x 1250 watts into 2 ohms and 2 x 2500 watts into 4 ohms bridged, making it versatile and ideal for a wide range of audio applications.Equipped with comprehensive protection functions, such as signal and clip limiter LEDs, the Martin Audio VIA5004 ensures safe operation and full output capability even in ambient temperatures up to 40°C. The switch mode power supply and variable speed cooling fan with front-to-back airflow provide efficient cooling and reliable performance. Global mains operation allows seamless compatibility with different power supplies, offering flexibility for various setups.Upgrade your sound system with the Martin Audio VIA5004 and enjoy exceptional audio performance, reliability, and ease of use. Whether for installations or portable applications, this 2U rack space amplifier is a must-have for anyone looking to enhance their audio setup.Specifications:- Channels: 4- Power Output: 5000 Watts total- Power Output per Channel: 4 x 1250 watts @ 2 ohms- Bridge Power Output: 2 x 2500 watts @ 4 ohms- Protection Functions: Signal and clip limiter LEDs- Cooling System: Variable speed cooling fan with front-to-back airflow- Temperature Range: Up to 40°C- Operation: Global mains operationProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 1250W into 2 ohms 4 x 800W into 4 ohms 4 x 450W into 8 ohms 2 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience to new heights with the Martin Audio VIA2502 2 Channel Class D Power Amplifier. This cutting-edge amplifier delivers a total power output of 2500 Watts, with two channels of efficient Class D amplification providing 2x1250 watts into 2 ohms. Whether you are a professional sound engineer or a music enthusiast, the Martin Audio VIA2502 is the ideal choice for powering BlacklineX, CDD, and V.Series systems in various installations and portable sound applications. Designed to meet the demands of challenging environments, this amplifier combines exceptional lightweight and compact 2U rack height design with a range of advanced features. The comprehensive protection systems ensure safe operating conditions, while the variable speed cooling fan and front-to-back airflow keep the amplifier cool even under pressure. Invest in the Martin Audio VIA2502 and enjoy unparalleled audio performance with ease.Specifications:- Power Output: 2x1250W @ 2Ω- Class: Class D- Total Power Output: 2500 Watts- Rack Height: 2UProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT 2 x 1250W into 2 ohms 2 x 800W into 4 ohms 2 x 450W into 8 ohms 1 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10kΩ Balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: High current, high frequency switch-mode AC OPERATING RANGE 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less