Description
Elevate your audio experience to new heights with the NEXO DTDAMP4X1.3C 4Ch Power Amp. Designed as the optimal companion for NEXO speakers backed by the DTD Controller, this power amplifier delivers a robust and crystal-clear sound performance. Featuring 4 channels capable of providing 4x1250W at 4Ω, this amplifier ensures a powerful audio output for your setup. The NEXO DTDAMP4X1.3C offers versatile bridging options allowing channels to be independently bridged two by two, providing flexibility in configuring your audio system. It boasts an ultra-efficient Switch Mode power supply and amplifier channel design for superior performance. The extensive protection features safeguard your equipment against mains over/undervoltage, temperature fluctuations, and DC outputs, ensuring the longevity and safety of your audio system. Ideal for powering mobile setups or fixed installations of NEXO ID and PS Series systems, the NEXO DTDAMP4X1.3C is available in two models: one delivering 4 x 700 Watts and another providing 4 x 1300 Watts at 4 Ohms.
Specifications:
- Channels: 4
- Power Output: 4x1250W @ 4Ω
- Bridging Options: Independent bridging two by two
- Protection Features: Comprehensive protection against mains over/undervoltage, temperature fluctuations, and DC outputs
- Power Supply: Switch Mode
- Amplifier Channel Design: High-efficiency design
Product Specifications
Power
- Number of channels:4 x amplifiers channel, 2 by 2 bridgeable
- Max. output voltage (no Load): 4 x 135 Volts
- Max. output power (4 x 8 Ohms): 4 x 750 Watts
- Max. output power (4 x 4 Ohms): 4 x 1300 Watts
- Max. output power (2 bridge x 8 Ohms): 2 x 2600 Watts
Audio Characteristics
- Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz
- Input impedance: 10 kOhms
- Input sensitivity: +8 dBU
- Nominal Gain: 32 dB
- Dynamic Range (A-weighted): > 110 dB
- THD+N: Typical 0.01%
Back Panel Features
- Analog audio inputs: 4 x balanced analog inputs on XLR
- Power outputs: 4 x SP4 outputs
- Link switch: To use same XLR input for 2 x adjacent channels
- Mains sockets: IEC C14 Inlet with secure lock
Front Panel Features
- Switch and knobs: Mains On/Off switch and volume control knob per channel
- View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel
- Amplifier status: Amp Ready and Temperature indicator per channels pairs
Mains Requirements
- Mains voltage: Factory set for 120 volts of 230 volts mains operation
- Power consumption (Idle): 65 Watts
- Power consumption 1/8 max. / 4 Ohms: 900 Watts
- Power consumption 1/4 max. / 4 Ohms: 1800 Watts
Physical Specifications
- Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
- Weight: 7.5 kg
- Operating temperature range: 0°C - 45 °C
Certifications
- CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
- Electrical safety certification: CSA, CB, EN60065
- EMC certification: EN55103-1 / EN55103-2 / FCC
Ordering Information
- Pre-configured for 230 volts mains: DTDAMP4x1.3C
- Pre-configured for 120 volts mains: DTDAMP4x1.3U
Delivery: 2-3 working days
