Amplifiers

Experience unparalleled value and performance with the Electro-Voice Q44II Class A-B Power Amplifier. Specifically designed for club and mobile systems, this powerful amplifier offers exceptional power and efficiency, making it the ideal choice for a wide range of venues. With up to 650W per channel at 2 ohms, the Q44II delivers outstanding dynamic headroom, ensuring optimal transient response and 30% greater output capability for short-duration signals. The Class A-B design, coupled with dynamic limiting features, prevents output clipping and provides extensive protection against thermal damage and electrical malfunction.The Q44II is built on Electro-Voice's legacy of power and performance, taking amplifier technology to new heights. Whether you're hosting a concert, performance centre event, or sports venue, the Q44II is the perfect amplifier for all sizes of venues. Equipped with XLR pass-through input connections, protective low-cut for systems without subwoofers, and a switchable LPN filter for enhanced tonal fundamentals, this amplifier offers versatility and reliability.The Electro-Voice Q44II Class A-B Power Amplifier features three-stage front-to-rear fans for efficient cooling, ensuring optimal performance even during long durations of use. The compact and affordable design makes the Q44II an excellent choice for any audio setup. Elevate your sound system with the Electro-Voice Q44II Class A-B Power Amplifier and enjoy unparalleled performance and peace of mind.Specifications:- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Dynamic Headroom for superb audio performance- Complete protection package with built-in dynamic limiters- XLR pass-through input connections- Three-stage front-to-rear fans for efficient coolingProduct Specifications General Amplifier Gain: 32 dB Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +2.2 dBu Intermodulation Distortion (SMPTE): 0.1 % Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): No Signal-to-Noise Ratio (A-weighted): 106 dB Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Physical & Dimensions Height: 2RU 88.1 mm (3.47") Width: 483 mm (19.02") Depth: 421.5 mm (16.59") Weight Net: 12.6 kg (27.78 lbs)

Read more less

The Dynacord V600:4 Power Amp offers a total powerTANK capacity of 600W, ensuring reliable and robust performance for small to mid-sized installation scenarios. - Featuring dualCOOL convection cooling and intelligent fan ecoRAIL, this 4-channel amplifier delivers a significant reduction in power consumption, making it an energy-efficient choice for various applications. - The Variable Load Drive (VLD) technology allows the V600:4 to provide the same power output into 4Ω, 8Ω, 70V, or 100V, offering unparalleled flexibility for driving multiple audio zones with different loads. Step into a world of professional audio excellence with the Dynacord V600:4 Power Amp 4Ch 600W powerTANK 4Ω/8Ω/100V 19" 1U. Designed for consultants, installers, and specifiers seeking a versatile and reliable amplifier, the V600:4 is the epitome of cutting-edge technology and performance. With a compact 1U form factor that saves valuable rack space, this amplifier is a powerhouse for various installation scenarios, from education and hospitality to retail and houses of worship. Experience the ultimate in efficiency with dualCOOL convection cooling and intelligent fan ecoRAIL, ensuring optimal performance while minimising power consumption. The Variable Load Drive (VLD) technology empowers the V600:4 to deliver consistent power output across different impedance levels, making it a go-to choice for driving multiple audio zones seamlessly. Say goodbye to energy wastage as the Dynacord powerTANK technology acts as a power reservoir, allowing for asymmetric power distribution as needed. Whether you're setting up a compact zone or a larger auditorium, the Dynacord V600:4 is your ideal companion, offering unparalleled flexibility and ease of installation. Elevate your audio experience and unlock the true potential of your sound system with the Dynacord V600:4 Power Amp - where innovation meets performance effortlessly.Specifications Signal processing:  Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements:  100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology:  Switching power supply with power factor correction Protections:  Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs:  Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V:  4 x 150 W Maximum output power per channel (power sharing):  300 W Total rated output power:  600 W Analog Audio Input: Type:  2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB):  +18 dBu Input impedance, active balanced:  20 kΩ Mains Input:  IEC C14 Loudspeaker output:  2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT:  Galvanic isolated relay, max. 30 VDC / 500 mADC Cooling concept:  Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits:  -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating):  -500 m to +5000 m (-1614 ft to 16404 ft) IEC Protection Class:  Class I (grounded) With 19” mounting brackets 44.2 x 483 x 269.5 mm(1.74 x 19.2 x 10.6 in) Weight:  3.6 kg (7.9 lb) Product Specifications General Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology: Switching power supply with power factor correction Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs: Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W Maximum output power per channel (power sharing): 300 W Total rated output power: 600 W Connectivity Analog Audio Input: Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB): +18 dBu Input impedance, active balanced: 20 kΩ Mains Input: IEC C14 Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC Climatic conditions Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft) Enclosure IEC Protection Class: Class I (grounded) Dimensions (HxWxD) With 19” mounting brackets 44.2 x 483 x 269.5 mm (1.74 x 19.2 x 10.6 in) Weight: 3.6 kg (7.9 lb) See Datasheet in Downloads tab for power specifications

Read more less

With a total output capacity of 600 watts, this compact two-channel amplifier Dynacord V600:2 is not only tailored for background music and announcements but also excels whenever higher SPL levels in small to mid-sized fixed installations are required, including educational facilities, hospitality venues, retail areas and houses of worshipThis versatile 2-channel amplifier delivers a total power capacity of 600W, making it perfect for a wide range of applications, from soothing background music to impactful announcements. Engineered for small to mid-sized fixed installations, this powerhouse combines power and efficiency seamlessly. With advanced technologies such as powerTANK, Variable Load Drive (VLD), ecoRAIL, and dualCOOL, this amplifier ensures flexible power usage, reduced energy consumption, and silent operation. The compact half-rack design offers multiple installation options, even in space-limited environments. Say goodbye to bulky amplifiers and embrace the sleek and powerful V600:2 to revolutionise your audio experience.Specifications Total rated output power:  600 W Number of channels:  2 Rated output power1:  2 x 300 W Output power::  4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing):  500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB):  27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB):  > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ):  < 0.1 % Connectivity Type:  1 x 6-pin Euroblock, 3.81 mm, male,parallel 1x RJ45 (AES72-1E) Loudspeaker output:  2 x 4-pin Euroblock, 5.08 mm, female Control port type:  1 x 5-pin Euroblock, 3.81 mm, male Signal processing:  Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements:  100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal):  < 12 W Consumption at 1/8 rated output power:  115 W Standby mode (APD active):  < 1 W Protections:  Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Product Specifications Electrical Total rated output power: 600 W Number of channels: 2 Rated output power1: 2 x 300 W Output power:: 4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 % Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E) Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control port type: 1 x 5-pin Euroblock, 3.81 mm, male General Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W Consumption at 1/8 rated output power: 115 W Standby mode (APD active): < 1 W Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection See Datasheet in Downloads tab for full specifications

Read more less

Experience unparalleled audio performance with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U. This professional power amplifier delivers a robust output of 2x400W in a compact 2U chassis, ensuring exceptional sound quality for your audio setup. Featuring advanced protection circuits such as Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection, this power amp ensures the safety of both the amplifier and connected loudspeaker systems.With versatile connectivity options including phoenix input plugs for easy installation, a single block plug for all output signals, and bridged mode for multi-channel setups, the Dynacord PCL1240T provides flexibility and convenience in connection. Tailor your sound with the switchable high-pass filter in each channel and make precise audio adjustments using the level controller for each channel. The premium phoenix style screw-lock connectors facilitate a seamless setup process, while the high-performance output transformers offer floating outputs compatible with 50V, 70V, and 100V installations.Elevate your audio experience with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U, designed to meet the demands of professional audio setups.Specifications:- Power Output: 2x400W- Chassis Size: 2U- Protection Circuits: Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, Thermal Overload Protection- Connectivity: Phoenix Input Plugs, Single Block Plug, Bridged Mode- High-Pass Filter: Switchable in Each Channel- Output Transformers: High-Performance for 50V, 70V, and 100V installationsProduct Specifications Please refer to the User Manual for product specifications.

Read more less

Elevate your live music performances to professional levels with the Dynacord L3600FD Live Series DSP Amplifier. This amplifier is engineered for demanding live music applications and is the perfect companion for performing musicians and production companies seeking exceptional sound reinforcement. With a powerful output of 2x1700W @ 4Ω and 2x3000W @ 2Ω, this amplifier ensures unparalleled sound quality, providing plenty of headroom for dynamic performances. The integrated FIR Drive technology and professional speaker processing deliver market-leading acoustic performance and rock-solid reliability, setting a new standard in sound reinforcement. The true 2 ohm stability of the amplifier, along with the intuitive system control software, makes setup and operation effortless. Trust the robust protection circuit to ensure flawless operation in any environment. Experience the best-in-class features of the Dynacord L Series amplifiers at a more accessible price point and take your live performances to the next level with exceptional sound quality and professional performance characteristics.Specifications:- Power Output: 2x1700W @ 4Ω, 2x3000W @ 2Ω- FIR Drive Technology- Professional Speaker Processing- True 2 ohm stability- Intuitive System Control Software- Robust Protection CircuitProduct Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: 2Ω= 3000W; 2.7Ω= 2500W; 4Ω= 1700W; 8Ω= 900W Maximum Output Power, Bridged: 4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Maximum Output Power, Bridged4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg

Read more less

- Exceptional sound quality with plenty of headroom- True 2 ohm stability for reliable performance- Fully integrated professional speaker processing with FIR Drive technologyExperience unparalleled sound quality and reliability with the Dynacord L2800FD Live Series DSP Amplifier. Engineered for demanding live music applications, this amplifier delivers a powerful performance that is ideal for musicians and production companies alike. With a robust power supply and linear amp design, this amplifier ensures flawless operation even in the most challenging environments.The Dynacord L2800FD features a fully integrated professional speaker processing system with FIR Drive technology, guaranteeing market-leading acoustic performance and rock-solid reliability. Its true 2 ohm stability provides peace of mind during live performances, while the intuitive system control software makes setup and control a breeze. Equipped with an onboard DSP that includes multi-band PEQs, crossovers, limiters, and delay per channel, the Dynacord L2800FD offers advanced features such as true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group. With its exceptional engineering and applied technologies, this amplifier brings professional performance to a more accessible price point, making it a must-have for venues like music clubs, community hall events, performance centers, and sports venues. Elevate your sound reinforcement setup with the Dynacord L2800FD Live Series DSP Amplifier.Product Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: 2Ω= 2200W; 2.7Ω= 1800W; 4Ω= 1300W; 8Ω= 650W; Maximum Output Power, Bridged: 4Ω= 4400W; 8Ω= 2600W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (at 900 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg

Read more less

- Exceptional sound quality and reliability: With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, the Dynacord L1800FD Live Series DSP Amplifier ensures market-leading acoustic performance and rock-solid reliability, making it the perfect choice for demanding live music applications.- Professional speaker processing with FIR Drive technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, providing you with precise control over your sound output for a truly professional performance every time.- Intuitive system control software: Enjoy easy setup and control with the intuitive system control software, allowing you to tailor your sound reinforcement to your specific needs effortlessly.Experience the pinnacle of sound reinforcement with the Dynacord L1800FD Live Series DSP Amplifier. Engineered for live music applications, this amplifier is a must-have for performing musicians and production companies seeking professional-grade performance at an accessible price point. The L Series power amplifiers boast a best-in-class feature set, including true 2 ohm stability and advanced FIR-Drive technology for exceptional sound quality and reliability. With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, this amplifier delivers unparalleled performance in venues such as music clubs, community hall events, performance centres, and sports venues. The onboard DSP provides multi-band PEQs, crossovers, limiters, and delay per channel, while the sophisticated protection circuit ensures safe and reliable operation in any environment. Take your live performances to the next level with the Dynacord L1800FD Live Series DSP Amplifier. Elevate your sound, captivate your audience, and unleash your true potential with this professional-grade amplifier.Product Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 1600W; 2.6Ω= 1300W; 4Ω= 950W; 8Ω= 480W Maximum Output Power, Dual Channel: 2Ω= 1400W; 2.6Ω= 1200W; 4Ω= 850W; 8Ω= 450W Maximum Output Power, Bridged: 4Ω= 2800W; 8Ω= 1700W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg

Read more less

Experience unparalleled sound reinforcement with the Dynacord L1300FD Live Series DSP Amplifier. Designed to elevate live music performances, this amplifier delivers crystal-clear audio quality for professional musicians and production companies. With 2x600W @ 4Ω and 2x1000W @ 2Ω, every note is heard with precision and clarity. The integration of FIR Drive technology and true 2 ohm stability ensures market-leading acoustic performance and rock-solid reliability. The advanced DSP features, including multi-band PEQs, crossovers, limiters, and delay per channel, allow for precise sound adjustments. The amplifier's true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group provide unprecedented control over audio output. Ideal for venues of all sizes, from music clubs to performance centres, the Dynacord L1300FD Live Series DSP Amplifier is a powerhouse that guarantees an unforgettable audio experience.Specifications:- Power Output: 2x600W @ 4Ω, 2x1000W @ 2Ω- Form Factor: 2U- FIR Drive technology- True 2 ohm stability- Advanced DSP features- True channel grouping control- Multiple PEQs, crossovers, limiters, and delay per channelProduct Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω=950W; 4Ω=660W; 8Ω=350W Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω=850W; 4Ω=600W; 8Ω=320W Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68 dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg

Read more less

- High Output Power: With a maximum output power of 2x1700W @ 4Ω, the Dynacord C3600FDI Install Series DSP Power Amp ensures a robust and reliable performance, making it perfect for venues such as bars, churches, and sports facilities.- Advanced DSP Technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, leading to market-leading acoustic performance and rock-solid reliability for an exceptional audio experience.- Easy System Control: The intuitive system control software simplifies setup and control, allowing you to effortlessly tailor the sound to suit your venue's specific requirements.Immerse your audience in a world of unparalleled audio quality with the Dynacord C3600FDI Install Series DSP Power Amp 2x1700W @ 4Ω. Designed for permanent installation applications, this powerhouse amplifier is the perfect choice for venues seeking to elevate their sound experience. Featuring cutting-edge DSP technology, this amplifier delivers fully integrated professional speaker processing with FIR Drive technology, ensuring market-leading acoustic performance and unmatched reliability. Whether you're setting up in a bar, church, restaurant, sports facility, or performing arts center, the Dynacord C3600FDI guarantees flawless operation even in the most demanding environments.Take control of your sound with the intuitive system control software, making setup and adjustments a breeze. With a maximum output power of 2x1700W @ 4Ω, this amplifier provides the high output power needed to fill your venue with crystal-clear sound. Elevate your audio experience with the Dynacord C3600FDI Install Series DSP Power Amp and set the stage for an unforgettable auditory journey.Product Specifications General Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; High Impedance= 70 V Operation=2 x 1250 W; 100 V Operation=2 x 2500 W Maximum Output Power, Bridged: Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance Direct Drive Load Capability: 100 V: 2 x 2500 W (-1.5 dB)* High Impedance Operation: 70V Operation & 100V Operation Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg

Read more less

Elevate your audio experience with the Dynacord C2800FDI Install Series DSP Power Amp, a powerhouse amplifier designed for permanent installation applications. With exceptional acoustic performance and reliability, this 2U amplifier delivers 2x1300W @ 4Ω, guaranteeing crystal-clear sound and top-notch precision. The fully integrated professional speaker processing, including FIR Drive technology, ensures unparalleled sound quality, while the intuitive system control software allows for effortless setup and customisation. Perfect for venues like bars, churches, restaurants, sports facilities, and performing arts centres, this amplifier boasts a power-saving standby mode for energy efficiency. Upgrade your audio setup today and enjoy flawless operation in any environment with the Dynacord C2800FDI Install Series DSP Power Amp. Specifications:- Power Output: 2x1300W @ 4Ω- Design: 2U Compact Design- Speaker Processing: Fully Integrated Professional Speaker Processing with FIR Drive Technology- Operation: Low Z and 70/100V Options- Energy Efficiency: Power-Saving Standby ModeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W Maximum Output Power, Bridged: Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05%% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg

Read more less

Elevate your venue's audio experience with the Dynacord C1800FDI Install Series DSP Power Amplifier 2x850W @ 4Ω 2U. Designed for permanent installation applications, this powerhouse of an amplifier delivers exceptional sound performance, making it ideal for bars, churches, restaurants, sports facilities, and performing arts centers. Featuring advanced DSP technology with FIR Drive, this amplifier ensures market-leading acoustic performance and rock-solid reliability for your audio setup. Enjoy effortless system control with the intuitive software that simplifies setup and allows for tailored sound adjustments to suit your venue's specific requirements. The Dynacord C1800FDI is equipped with Euroblock connectors and a robust power supply, guaranteeing flawless operation even in demanding environments. Whether you need Low Z or 70/100V operation, this amplifier has got you covered. Benefit from power-saving standby mode for energy efficiency when not in use, ensuring cost-effective operation.Key specifications:- Maximum Output Power: 2x850W @ 4Ω- Speaker Processing: Fully integrated professional speaker processing with FIR Drive technology- Connectivity: Euroblock connectors- Operation: Low Z or 70/100V operation- System Control: Intuitive software for easy setup and sound adjustment- Energy Efficiency: Power-saving standby modeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 1250W; Maximum Output Power, Bridged: Load Impedance= 4Ω=2800W; 8Ω=1700W; High Impedance= 70V Operation=1x 600W; 100V Operation=1x 1250W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70 V: 2 x 1250 W (-1.5 dB)* 100 V: 1 x 1250 W (-1.5 dB)* High Impedance Operation: 70 V (dual channel), 100 V (bridged) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg

Read more less

Elevate your venue's audio experience to new heights with the Dynacord C1300FDI Install Series DSP Power Amplifier. This professional-grade power amplifier is designed for permanent installation applications to deliver exceptional sound quality and flawless operation. Featuring fully integrated professional speaker processing and FIR Drive technology, this power amp ensures crystal-clear sound reproduction, bringing your music to life with exceptional clarity. The robust power supply and powerful linear amp design guarantee uninterrupted performance in even the most demanding environments, providing rock-solid reliability for continuous use. The intuitive system control software allows for easy setup and control, enabling users to tailor their audio experience effortlessly. Immerse your audience in unparalleled sound quality with the Dynacord C1300FDI Install Series DSP Power Amplifier.Key Specifications:- Power Output: 2x600W @ 4Ω- Rack Unit Size: 2UProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) Maximum Output Power, Bridged: High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70V: 1 x 625W (0.0 dB)* High Impedance Operation: 70V (in bridged mode) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: < 0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg

Read more less

Elevate your audio setup to professional standards with the Dynacord SL2400 Class-H Power Amplifier. This powerhouse of performance and reliability is designed for the discerning audiophile who demands exceptional quality. With a maximum output power of 1200W @ 4Ω and 1800W @ 2Ω, the SL2400 delivers a high, stable power output with impressive efficiency, making it the perfect choice for a versatile range of mobile and club systems.Experience peace of mind with the comprehensive protection system of the SL2400, featuring turn-on-delay relays that safeguard your loudspeakers from damage. The integrated patented LPN filter compensates for transient distortion in dynamic signals, ensuring a smooth and uninterrupted audio performance. Additionally, the switchable Low-Pass Notch filter corrects the frequency response and optimizes the transient behavior of your loudspeakers, providing a premium audio experience with clear and accurate sound reproduction.Immerse yourself in the world of professional audio with the Dynacord SL2400 Class-H Power Amplifier. With its sleek black finish and robust design, the SL2400 is not just a power amp - it's a statement of quality and performance.Specifications:- Output Power: 2x1200W @ 4Ω, 2x1800W @ 2Ω- Form Factor: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 1200Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +6.6dBu (1.66Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 3600W, 8Ω - 2400W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1800W, 4Ω - 1200W, 8Ω - 750W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 3400W, 4Ω - 1800W, 8Ω - 950W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 17.1kg

Read more less

Elevate your audio experience with the Dynacord SL1800 Class-H Power Amplifier. Designed for both mobile and club systems, this power amp delivers unmatched power and efficiency, ideal for those who demand top performance. With a max output power of 900W @ 4Ω and 1250W @ 2Ω, you can enjoy crystal-clear sound quality at any volume level. Experience worry-free listening with the comprehensive protection system, including turn-on-delay relays and dynamic limiters, ensuring your loudspeakers are always safe. The integrated patented LPN filter corrects frequency response and optimizes transient behaviour, resulting in a truly immersive sound experience. Specifications:- Power Output: 2x900W @ 4Ω, 2x1250W @ 2Ω- Rack Space: 2U- Protection System: Turn-on-delay relays, dynamic limiters- Special Feature: Patented LPN filter for optimal sound qualityProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 900Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +5.1dBu (1.39Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 2800W, 8Ω - 1800W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1250W, 4Ω - 900W, 8Ω - 550W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 2450W, 4Ω - 1400W, 8Ω - 700W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 16.3kg

Read more less

Experience superior audio performance with the Dynacord SL1200 Class-AB Power Amp. Designed for excellence, this power amp delivers a maximum output power of 2x600W @ 4Ω and 2x900W @ 2Ω, making it the ideal choice for a variety of mobile and club systems. Equipped with a comprehensive protection system and dynamic limiters, this power amp ensures the safety of your loudspeakers with features like turn-on-delay relays and the patented LPN filter, guarding against transient distortion in dynamic signals.Immerse yourself in crystal-clear sound quality with a frequency response of 10Hz to 40kHz (±1dB), delivering a dynamic and immersive listening experience. Elevate your audio setup with the Dynacord SL1200 Class-AB Power Amp and enjoy unparalleled performance and protection for your sound system.Specifications:- Power Output: 2x600W @ 4Ω, 2x900W @ 2Ω- Frequency Response: 10Hz to 40kHz (±1dB)- Maximum Input Level: +21dBuProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 600Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +3.1dBu (1.11Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1800W, 8Ω - 1200W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 900W, 4Ω - 600W, 8Ω - 380W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1700W, 4Ω - 950W, 8Ω - 480W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 14.8kg

Read more less

Experience unparalleled power and reliability with the Dynacord SL900 Class-AB Power Amplifier. Delivering an impressive 450W per channel at 4Ω, this amplifier is engineered to meet the demands of both mobile DJs and club systems. Its high stability and efficiency factor ensure a consistent and powerful performance, making it the ultimate choice for audio professionals. Equipped with a comprehensive protection system including dynamic limiters, turn-on-delay relays, and a patented LPN filter, this amplifier guarantees the safety and security of your equipment, especially your loudspeakers. The sleek black finish and compact 2U design not only exude professionalism but also signify durability and long-lasting performance. Elevate your audio setup today with the Dynacord SL900 Power Amplifier.Specifications:- Maximum Output Power: 450W per channel @ 4Ω- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Size: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 450Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +2,2dBu (1,0Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1300W, 8Ω - 900W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 650W, 4Ω - 450W, 8Ω - 270W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1150W, 4Ω - 660W, 8Ω - 350W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 12.6kg

Read more less

Discover the pinnacle of audio amplification with the Crown CT 8150 ComTech DriveCore Fanless Power Amplifier. Featuring cutting-edge DriveCore™ technology, this amplifier merges the amplifier drive stage and power output stage into a single chip, providing exceptional audio quality comparable to a Class AB design. Its versatile input routing and various power configurations, such as Auto-Standby and Deep Sleep modes, ensure adaptability to different setups. The sleek convection-cooled chassis of this amplifier operates silently, offering reliability and efficiency for your sound system. Elevate your audio experience with the Crown CT 8150 and enjoy unparalleled performance.Key Specifications:- Power Output: 8x125W @ 4Ω- Fanless Design: Convection-cooled for silent operation- Input Routing: Flexible input routing options- Power Configurations: Includes Auto-Standby and Deep Sleep modesProduct Specifications General Channels: 8 Sensitivity: 1.4V Rated Power Output: 125W per channel into 8/4 ohms Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-weighted): 110 dB Total Harmonic Distortion (full rated power, 1kHz): < 0.05% Intermodulation Response (from 0dB down to -30dB): < 0.05% Frequency Response: ± 0.5 dB Common Mode Rejection (20kHz to 1kHz): 70 dB Load Ranges: 4-160 Ohms Physical & Dimensions Height: 1.75" Width: 19" Depth: 15.19" Weight: 10lbs

Read more less

Elevate your sound system with the innovative Crown CT 4150 ComTech DriveCore Fanless Power Amplifier. Revolutionising the audio amplification industry, this 4-channel amplifier is designed to deliver unparalleled efficiency and performance. With DriveCore™ technology seamlessly integrating the amplifier drive stage with the power output stage, you can expect exceptional audio quality with a rated power output of 125W per channel at 4 ohms. The convection cooled chassis design ensures silent operation, making noisy fans a thing of the past. Featuring flexible input routing for versatile connectivity options, this amplifier is ideal for both professional sound engineers and passionate audiophiles. Immerse yourself in crystal-clear audio and experience the future of audio amplification with the Crown CT 4150.Specifications:- Power Output: 125W per channel @ 4 ohms- Cooling System: Convection cooled chassis design- Connectivity: Flexible input routingProduct Specifications General Channels: 4 Sensitivity: 1.4 V Rated Power Output (all channels driven): 125W per CH @ 4 ohms, 125W per CH @ 8 ohms Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): 110 dB THD (full rated power, 20 Hz - 20 kHz): < 0.05% Intermodulation Distortion (from 0 dB down to -30 dB): < 0.05% Frequency Response (at 1W, 4/8 ohms): +/- 0.5 dB Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB Common Mode Rejection (20 Hz to 1 kHz): > 55 dB, typically > 70 dB Voltage Gain: 27 dB DC Offset: +/- 20mV Idle Power Consumption (Standard Mode): 17.5W Physical & Dimensions Height: 1.75" Width: 19" Depth: 15.19" Weight: 10lbs

Read more less

Unleash the pure power of professional sound with the impressive Crown XTi 6002 Power Amp with Integral DSP. This 2U lightweight amplifier is meticulously designed to cater to the needs of discerning professionals who seek unparalleled performance and protection for their audio equipment. Delivering a formidable 2x2100W @ 4Ω or 2x3000W @ 2ohm, this powerhouse ensures that your music resonates loud and clear, making every note count. The integrated Peakx Plus™ Limiters provide precise control over your system's performance and safeguard your equipment at all times. Fine-tune your audio with the Enhanced Subharmonic Synth section, allowing you to tailor frequencies, gains, and filter types for a bespoke system-specific tuning that guarantees an exceptional audio experience. Featuring 50 presets, including 49 user-definable options, this amp offers unmatched flexibility. Moreover, the 3 user-defined fan mode controls enable customised cooling options, ensuring optimal performance based on your requirements. With durable cast-aluminium rack handles for portability, the Crown XTi 6002 Power Amp is the perfect companion for on-the-go professionals looking to take their sound system to new heights.- Power Output: 2x2100W @ 4Ω or 2x3000W @ 2ohm- Peakx Plus™ Limiters for ultimate system performance and protection- Enhanced Subharmonic Synth section for precise system tuning- 50 presets, including 49 user-definable options- 3 user-defined fan mode controls for customised cooling options- Integrated cast-aluminium rack handles for durability and portabilityProduct Specifications General Channels: 2 Sensitivity: 1.4V Rated Power Output (per channel): 3000W 2Ω, 2100W 4Ω, 1200W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 103 dB (A-weighted) THD: < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 16.2" Weight: 10.9kg

Read more less

Unleash the full potential of your sound system with the Crown XTi 4002 Power Amplifier with Integral DSP. This revolutionary amplifier is a game-changer in the world of sound engineering, offering unparalleled system performance and protection. The Peakx Plus™ Limiters provide you with complete control over threshold, attack, and release, ensuring ultimate system performance and protection night after night. Tailor your audio output with the Enhanced Subharmonic Synth section, allowing for precise system-specific tuning control by adjusting frequency, gain, and filter type. With user-defined fan mode controls, match fan performance to your specific needs, whether it's normal, early, or full-speed mode. The Crown XTi 4002 Power Amplifier seamlessly blends thermal efficiency, system flexibility, and control capabilities to take your audio experience to the next level. Dominate the stage with confidence, knowing you have the reliability and performance of the Crown XTi 4002 Power Amplifier by your side.Specifications:- Power Output: 2x1200W @ 4Ω- Rack Size: 2UProduct Specifications General Channels: 2 Sensitivity: 1.4V Rated Power Output (per channel): 1600W 2Ω, 1200W 4Ω, 650W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted) THD: < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB IEC Power Connector: 15A Physical & Dimensions Height: 8.9cm Width: 48.3cm Depth: 31.1cm Weight: 8.4 kg

Read more less

Elevate your audio experience to new heights with the Crown XTi 2002 Power Amp with Integral DSP. This 2U amplifier redefines power and innovation, delivering unmatched performance for professionals seeking reliability and precision. The Peakx Plus™ Limiters provide unrivalled system protection and performance control, while the Enhanced Subharmonic Synth section allows for precise system tuning like never before. With user-defined fan mode controls, customise fan performance to suit your exact needs, ensuring optimal operation. Gain software visibility of Power Supply Temperature and AC Line Voltage for enhanced control capabilities. Lightweight and durable with integrated cast-aluminum rack handles, the XTi 2002 is perfect for on-the-go professional setups. Unleash the full force of your sound system with the Crown XTi 2002 Power Amp with Integral DSP.- Power Output: 2x800W @ 4Ω- Amplifier Class: Not specified- Weight: Not specified- Dimensions: 2U- Fan Mode Controls: User-defined- Limiter Type: Peakx Plus™- Subharmonic Synth: Enhanced- Rack Handles: Integrated cast-aluminumProduct Specifications General Channels: 2 Sensitivity: 1.4V Rated Power Output (per channel): 1000W 2Ω, 800W 4Ω, 475W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted) THD: < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 12.25" Weight: 8.4kg

Read more less

Elevate your sound system with the Crown XTi 1002 Power Amp with Integral DSP. Setting the standard for innovative amplifiers, this powerhouse offers unmatched performance and value. Benefit from advanced speaker processing tools like Peakx Plus Limiters and an Enhanced Subharmonic Synth section, allowing for precise system-specific tuning and ultimate control. The XTi 2 Series presents enhanced control capabilities, enabling you to tailor fan speed, monitor system parameters, and ensure optimal performance consistently. Designed for professionals seeking top-notch quality and reliability, this amp features a universal tracking switch-mode power supply and integrated cast-aluminum rack handles for durability and portability.Specifications:- Power Output: 2x500W @ 4Ω- Rack Size: 2U- Speaker Processing Tools: Peakx Plus Limiters, Enhanced Subharmonic Synth section- Control Capabilities: User-defined fan mode controls, Power Supply Temperature visibility, AC Line Voltage visibility- Power Supply: Universal tracking switch-mode- Design: Integrated cast-aluminum rack handlesProduct Specifications General Channels: 2 Sensitivity: 1.4V Rated Power Output (per channel): 700W 2Ω, 500W 4Ω, 275W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A-weighted) THD: < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz): + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz: >70 dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 12.25" Weight: 8.4 kg

Read more less

Elevate your sound experience with the Crown XLS 2502 DriveCore 2 Power Amplifier with DSP. Unleash the immense power of 2x775W @ 4Ω in a compact 2U unit that incorporates Crown's ultra-efficient DriveCore technology. This Class D amp guarantees pristine audio quality and unparalleled precision. Enjoy advanced features such as higher DSP capabilities and the integrated PureBand™ Crossover System, ensuring a clean, undistorted signal for an exceptional auditory experience. Enhance your control with selectable input sensitivity options and a security setting to safeguard your settings. The enlarged LCD display provides clear visibility, while efficient forced-air fans prevent thermal build-up, ensuring consistent performance. Protect your speakers with the Peakx™ Limiters that offer maximum output while preserving your equipment.- Power Output: 2x775W @ 4Ω- Design: 2U Sleek Design- DSP Capabilities: Advanced DSP Features- Input Sensitivity: Selectable Options- Cooling System: Efficient Forced-Air Fans- Protection: Peakx™ Limiters- Other Features: PureBand™ Crossover System, Security Setting, Reset OptionProduct Specifications General Sensitivity: 1.4Vrms Frequency Response: +0dB, -1dB Signal to Noise: >103dB (at .775Vrms, 6dB lower) Intermodulation Distortion: < 0.3% Damping Factor: > 200 THD: < 0.5% Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 10.7" Weight: 4.9kg

Read more less

- Experience powerful sound with 2x650W @ 4Ω output, ensuring a clean, undistorted signal to your speakers.- Benefit from advanced DSP capabilities, including band pass filters per channel, for enhanced control and performance.- Enjoy the convenience of features like selectable input sensitivity, system reset, and remote power trigger for a seamless user experience.Step into the world of professional audio excellence with the Crown XLS 2002 DriveCore 2 Power Amp with DSP 2x650W @ 4Ω 2U. This Class D amplifier, featuring Crown's innovative DriveCore technology, delivers a remarkable 2x650W @ 4Ω output, ensuring your sound is powerful and crystal clear.With higher DSP capabilities than its predecessor, this amplifier offers increased control and performance, thanks to features like band pass filters per channel. The integrated PureBand™ Crossover System provides you with better control over your audio, ensuring optimal performance in any venue.Not just about power, this amplifier also prioritises user convenience. The selectable input sensitivity options allow you to drive the amp at full power, while the system reset feature lets you restore factory settings with ease. The remote power trigger adds a touch of practicality, making operation seamless and hassle-free.Whether you're a professional musician, DJ, or audio enthusiast, the Crown XLS 2002 DriveCore 2 Power Amp with DSP is your gateway to a superior audio experience. Elevate your sound quality, enjoy precise control, and immerse yourself in the world of premium audio performance.Product Specifications General Sensitivity: 1.4Vrms Frequency Response: +0dB, -1dB Signal to Noise: >103dB (at .775Vrms, 6dB lower) Intermodulation Distortion: < 0.3% Damping Factor: > 200 THD: < 0.5% Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 10.7" Weight: 4.9kg

Read more less

Elevate your audio experience to unprecedented levels with the Crown XLS 1502 DriveCore 2 Power Amp with DSP. This powerful amp delivers 2x525W @ 4Ω in a sleek 2U design, making it ideal for professional musicians, DJs, and sound engineers. The innovative DriveCore technology from Crown ensures exceptional performance every time. Benefit from advanced DSP capabilities, such as a band pass filter per channel and selectable input sensitivity options, giving you total control over your sound. Features like the Peakx™ Limiters and integrated PureBand™ Crossover System provide speaker protection and enhance performance. With efficient forced-air fans to prevent thermal build-up and a stylish LCD display for easy monitoring, this amp is perfect for any venue or event. Key Specifications:- Power Output: 2x525W @ 4Ω- Design: 2U compact size- DSP Capabilities: Band pass filter per channel, increased lighting functionality- Key Features: Peakx™ Limiters, PureBand™ Crossover System, forced-air fans for coolingProduct Specifications General Sensitivity: 1.4Vrms Frequency Response: +0dB, -1dB Signal to Noise: >103dB (at .775Vrms, 6dB lower) Intermodulation Distortion: < 0.3% Damping Factor: > 200 THD: < 0.5% Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 7.7" Weight: 3.9kg

Read more less

- Harness the power of the Crown XLS 1002 DriveCore 2 Power Amp with DSP for crystal-clear sound delivery- Enjoy unparalleled efficiency with Crown's ultra-efficient DriveCore technology- Benefit from the sleek new look, higher DSP capabilities, and integrated PureBand Crossover System for top-notch performanceImmerse yourself in a world of unparalleled sound quality with the Crown XLS 1002 DriveCore 2 Power Amp with DSP. This Class D amp, powered by Crown's innovative DriveCore technology, ensures that every note, beat, and lyric is delivered with pristine clarity and power. Weighing less than 11 lb (5 kg), this amp is a lightweight powerhouse that packs a punch.Experience the next generation of audio excellence with the XLS 1002 DriveCore 2. Featuring a larger LCD display, increased lighting functionality, and higher DSP capabilities, this amp is designed to elevate your audio experience to new heights. The integrated PureBand Crossover System guarantees better performance and control, allowing you to tailor your sound exactly to your preferences.Whether you're a professional musician, a sound engineer, or a passionate audiophile, the Crown XLS 1002 DriveCore 2 Power Amp with DSP is the perfect companion for delivering a powerful, pure sound experience in any venue. With features like selectable input sensitivity, efficient forced-air fans, and Peakx™ Limiters for speaker protection, this amp is a must-have for anyone who demands nothing but the best in audio quality. Elevate your sound game with the Crown XLS 1002 DriveCore 2 Power Amp with DSP and experience music like never before.Product Specifications General Sensitivity: 1.4Vrms Frequency Response: +0dB, -1dB Signal to Noise: > 97dB (at .775Vrms sensitivity, 6dB lower) Intermodulation Distortion: < 0.3% Damping Factor: > 200 THD: < 0.5% Crosstalk: At 1kHz: > 85dB, At 20kHz: > 55dB Physical & Dimensions Height: 3.5" Width: 19" Depth: 7.7" Weight: 3.9kg

Read more less

Experience the pinnacle of audio amplification with the Crown XLi 3500 Rugged Power Amp. Delivering an impressive 2 x 1350W power output, this power amp is a powerhouse of performance and reliability. Whether you are a professional musician, DJ, entertainer, or run a venue like a house of worship, disco, or pub, this power amp is designed to elevate your sound experience to new heights.The Crown XLi 3500 offers a range of features that make it stand out from the crowd. From its stereo/parallel/bridge-mono mode to user-selectable input sensitivity options, this power amp provides unparalleled versatility. With a variety of input and output connections including RCA and XLR inputs, binding post, and Speakon outputs, you have the flexibility to adapt it to different setups and applications seamlessly.Built with durability in mind, the Crown XLi 3500 features efficient forced-air cooling that prevents thermal buildup, ensuring consistent and reliable performance even during extended use. Moreover, this power amp comes equipped with protection mechanisms against shorts, no-load, on/off thumps, and radio-frequency interference, offering peace of mind knowing your equipment is safeguarded.Key Specifications:- Power Output: 2 x 1350W @ 4Ω- Modes: Stereo/Parallel/Bridge-Mono- Input Sensitivity: User-selectable- Input Connections: RCA, XLR- Output Connections: Binding post, SpeakonProduct Specifications General Frequency Response: 20 Hz - 20 kHz, +0/-1 dB (at 1 watt) THD: <0.5%, 20 Hz - 20 kHz Intermodulation Distortion: =/ <0.35% (60 Hz and 7 kHz at 4:1 from full rated ouput to -30 dB) Slew Rate: >10V/us Voltage Gain: 31 dB Damping Factor: (8 ohms, 10 Hz to 400 Hz) >200 Signal To Noise Ratio (A-weighted): >100 dB Crosstalk (below rated power) 20 Hz to 1 kHz: -75 dB, -59 dB Input Sensitivity(for full rated power at 8 ohms): 0.775V or 1.4V Input Impedance (nominal balanced, unbalanced): 20kΩ, 10kΩ AC Line Voltage and Frequency Configurations Available: (+10%) 120V~60 Hz; 220V~50/60 Hz; 230-240V~50/60 Hz Physical & Dimensions Width: 19" Height: 3.5" Depth: 12.4" Weight: 12.7kg

Read more less

Experience unparalleled power and reliability with the Crown XLi 2500 Rugged Power Amplifier. This professional-grade amplifier delivers a massive 2 x 750W @ 4Ω power output, catering perfectly to the needs of musicians, DJs, entertainers, and various venues like houses of worship, discos, and pubs. The Crown XLi 2500 offers exceptional versatility with its stereo/parallel/bridge-mono mode and user-selectable input sensitivity options of 0.775V or 1.4V, ensuring seamless integration into diverse audio setups.Moreover, this amplifier is equipped with advanced cooling mechanisms to prevent thermal issues, coupled with comprehensive protection features against shorts, no-load situations, on/off thumps, and radio-frequency interference, guaranteeing the durability and uninterrupted performance of the amplifier. Elevate your audio experience with the Crown XLi 2500 Rugged Power Amplifier 2 x 750W @ 4Ω and enjoy the perfect blend of power, reliability, and quality.Key Specifications:- Power Output: 2 x 750W @ 4Ω- Modes: Stereo/Parallel/Bridge-Mono- Input Sensitivity: 0.775V or 1.4VProduct Specifications General 4-ohm Dual (per ch.): 750W 8-ohm Dual (per ch.): 500W 8-ohm Bridge-Mono: 1500W Channels: 2 Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V Signal to noise ratio (below rated power 20Hz to 20kHz, A-Weighted): >100dB Total Harmonic Distortion (THD) (20Hz-20kHz): <0.5% Inter Modulation Distortion (60Hz and 7kHz at 4:1 form full rated output to -40dB): =/<0.35% Frequency response (at 1W, 20Hz-20kHz): 0dB, -1dB Crosstalk (below rated power) (at 1kHz): -75dB, (at 20kHz): -59dB Damping factor (from 10Hz to 400Hz at 8 ohms): >200 AC line voltage and frequency configurations (± 10%): (120VAC) 60Hz, (220VAC) 50/60Hz, (230-240VAC) 50/60Hz Physical & Dimensions Height: 3.5" Width: 19" Depth: 12.4" Weight: 13.5kg

Read more less

Step into a new era of power amplification excellence with the Crown XLi 1500 Rugged Power Amplifier. Designed for professionals and enthusiasts who demand the utmost in performance and reliability, this rugged amplifier provides a potent 2 x 450W power output. Ideal for musicians, DJs, entertainers, as well as commercial establishments like houses of worship, discos, and pubs, the Crown XLi 1500 stands as a powerful and dependable companion.Versatility is at the core of this amplifier's functionality, offering stereo/parallel/bridge-mono mode selection and user-selectable input sensitivity. Its array of inputs and outputs includes RCA, XLR, Speakon, and binding posts, ensuring adaptability for a variety of setups and applications.Worried about overheating or electrical issues? Fear not. The Crown XLi 1500 features an efficient forced-air cooling system to prevent excessive thermal build-up and is equipped with protection against shorts, no-load, on/off thumps, and radio-frequency interference. This ensures longevity, reliability, and peace of mind for users.- Power Output: 2 x 450W- Resistance: 4Ω- Rack Unit Size: 2UProduct Specifications General 4-ohm Dual (per ch.): 450W 8-ohm Dual (per ch.): 330W 8-ohm Bridge-Mono: 900W Channels: 2 Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V Signal to noise ratio (below rated power 20Hz to 20kHz, A-Weighted): >100dB Total Harmonic Distortion (THD) (20Hz-20kHz): <0.5% Inter Modulation Distortion (60Hz and 7kHz at 4:1 form full rated output to -40dB): =/<0.35% Frequency response (at 1W, 20Hz-20kHz): 0dB, -1dB Crosstalk (below rated power) (at 1kHz): -75dB, (at 20kHz): -59dB Damping factor (from 10Hz to 400Hz at 8 ohms): >200 AC line voltage and frequency configurations (± 10%): (120VAC) 60Hz, (220VAC) 50/60Hz, (230-240VAC) 50/60Hz Physical & Dimensions Height: 3.5" Width: 19" Depth: 12.4" Weight: 12.7kg

Read more less

Elevate the audio quality of your events with the Crown XLi 800 Professional Grade 2-Channel Power Amplifier. Built for musicians, DJs, houses of worship, and venues, this amplifier is the pinnacle of power and reliability. Delivering 2 x 300W @ 4Ω, it ensures crystal clear sound reproduction in any setting. Its rugged construction guarantees durability, while the efficient forced-air cooling system prevents thermal buildup, allowing you to push your sound system to its limits while maintaining optimal performance. Choose the Crown XLi 800 for exceptional sound quality, versatility, and longevity.Key Specifications:- Power Output: 2 x 300W @ 4Ω- Mode: Stereo/Parallel/Bridge-Mono - Input Sensitivity: User-Selectable- Inputs: Electronically Balanced RCA & XLR- Outputs: Binding Post and Speakon- Protection Features: Shorts, No-Load, On/Off Thumps, RF InterferenceProduct Specifications General 4-ohm Dual (per ch.): 300W 8-ohm Dual (per ch.): 200W 8-ohm Bridge-Mono: 600W Channels: 2 Sensitivity (full rated power at 8 ohms): 0.775V or 1.4V Signal to noise ratio (below rated power 20Hz to 20kHz, A-Weighted): >100dB Total Harmonic Distortion (THD) (20Hz-20kHz): <0.5% Inter Modulation Distortion (60Hz and 7kHz at 4:1 form full rated output to -40dB): =/<0.35% Frequency response (at 1W, 20Hz-20kHz): 0dB, -1dB Crosstalk (below rated power) (at 1kHz): -75dB, (at 20kHz): -59dB Damping factor (from 10Hz to 400Hz at 8 ohms): >200 AC line voltage and frequency configurations (± 10%): (120VAC) 60Hz, (220VAC) 50/60Hz, (230-240VAC) 50/60Hz Physical & Dimensions Height: 3.5" Width: 19" Depth: 12.4" Weight: 11.4kg

Read more less

Elevate your commercial audio experience with the Cloud Contractor VA4120 Power Amp. This 4-channel powerhouse delivers 120W per channel, making it ideal for low-impedance (4 ohm) or 25/70/100V-line systems. With a focus on precision and versatility, this amplifier features per-channel gain preset controls and a 65 Hz high-pass filter for each channel. The VA4120 ensures not only superior audio quality but also safety with its over-temperature and output DC protection. Designed for efficiency, this amplifier offers balanced inputs and per-channel gain preset controls for tailored audio tuning. The per-channel 65 Hz high-pass filter optimises performance with 25/70/100V line systems, while the per-channel limiter prevents clipping, ensuring crystal-clear sound. Choose between 115V or 230V operation and enjoy optimal performance with forced-air cooling. Upgrade your audio setup with the Cloud Contractor VA4120 Power Amp for premium sound quality and reliability in any commercial space.Specifications:- Power Output: 120W per channel- Impedance: 4 ohm- Line Systems: 25/70/100V-line- Controls: Per-channel gain preset, 65 Hz high-pass filter- Protection: Over-temperature, output DC- Operation: 115V or 230V- Cooling: Forced-airProduct Specifications Line Inputs Frequency Response: 20 Hz to 20 kHz, ±1 dB Input impedance: 47 kohms Headroom: 16 dB Noise: <-85 dB (22 kHz bandwidth) Speaker Output Output Power (1 kHz continuous sine wave) VA2120: 2 x 120 watts VA4120: 4 x 120 watts Minimum load Low-Z output: 4 ohms High-Z output: 25 V-line 5.2 ohms 70 V-line 41 ohms 100 V-line 83 ohms Frequency response: Low-Z output: 20 Hz to 20 kHz, ±1 dB High-Z output: 20 Hz to 20 kHz, ±1 dB (hi-pass filter off) THD + N: < 0.05% @ 1 kHz Protection: Fixed level signal limiter: DC, over-current and over-temperature protection General Power input: Selectable 115 VAC or 230 VAC, ±10%; 45 – 65 Hz Normal operating temperature: 0 °C to 35 °C (Note: performance and specifications cannot be guaranteed outside of this range) Cooling Forced air cooling: 1 x 80 mm dia. fan (VA2120); 2 x 80 mm dia. fans (VA4120). Airflow direction: front-to-back For full detailed specifications, please find the datasheet located in the downloads tab.

Read more less

Elevate your commercial space's audio experience with the Cloud Contractor VA2120 Power Amp. This powerful amplifier, boasting a power output of 120W per channel, delivers a rich and immersive sound quality that captivates the audience. Whether you need to power low-impedance loudspeakers or utilise 25/70/100V line systems, the VA2120 offers versatile compatibility to meet your specific setup requirements. Featuring balanced inputs, per-channel gain controls, and a high-pass filter for precise tuning, this amplifier provides flexibility and control for optimal audio performance. Additionally, the VA2120 is equipped with essential protection features, including over-temperature and output DC protection, along with per-channel limiters to prevent clipping, ensuring the longevity and safety of your audio system.Specifications:- Power Output: 2 x 120W- Impedance: 4Ω- Line Compatibility: 25/70/100V- Inputs: Balanced- Controls: Per-channel gain controls- Protection Features: Over-temperature and output DC protection, per-channel limitersProduct Specifications Line Inputs Frequency Response: 20 Hz to 20 kHz, ±1 dB Input impedance: 47 kohms Headroom: 16 dB Noise: <-85 dB (22 kHz bandwidth) Speaker Output Output Power (1 kHz continuous sine wave) VA2120: 2 x 120 watts VA4120: 4 x 120 watts Minimum load Low-Z output: 4 ohms High-Z output: 25 V-line 5.2 ohms 70 V-line 41 ohms 100 V-line 83 ohms Frequency response: Low-Z output: 20 Hz to 20 kHz, ±1 dB High-Z output: 20 Hz to 20 kHz, ±1 dB (hi-pass filter off) THD + N: < 0.05% @ 1 kHz Protection: Fixed level signal limiter: DC, over-current and over-temperature protection General Power input: Selectable 115 VAC or 230 VAC, ±10%; 45 – 65 Hz Normal operating temperature: 0 °C to 35 °C (Note: performance and specifications cannot be guaranteed outside of this range) Cooling Forced air cooling: 1 x 80 mm dia. fan (VA2120); 2 x 80 mm dia. fans (VA4120). Airflow direction: front-to-back For full detailed specifications, please find the datasheet located in the downloads tab.

Read more less

Experience exceptional sound performance with the Cloud CV8125 Energy Star Compliant Digital Amp with DSP 8x125W 100V 2U. This cutting-edge amplifier from Cloud Electronics, UK, delivers a total power output of 1KW, ensuring a robust performance for all your audio needs. Featuring Energy Star compliance and an Automatic Power Down feature, this amplifier is designed to reduce power consumption without compromising on quality. The configurable DSP functionality allows precise control over input routing, EQ settings, and output level, empowering you to fine-tune your audio settings effortlessly.The Cloud CV8125 offers versatility by enabling multi-channel operation and bi-amping, allowing you to adjust crossover parameters with precision. Compatible with Cloud RL Series remote level control plates, this amplifier facilitates convenient remote operation for managing your audio settings. With RS-232 and Ethernet connectivity, seamless integration with third-party control systems like Crestron and AMX is easily achievable.Specifications:- Total Power Output: 1KW- Power: 8x125W- Energy Efficiency: Energy Star Compliant- DSP Functionality: Configurable- Input Control: Routing options- EQ Settings: Multi-band parametric EQ- Remote Operation: Compatible with Cloud RL Series control plates- Connectivity: RS-232 and EthernetProduct Specifications General Output Power: Total output power 1 kW, all channels1 Output Voltage: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 20 kHz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Amplifier Protection: Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical & Dimensions Height: 88mm Width: 482.6mm Depth: 381.8mm Weight: 8.05kg

Read more less

Elevate your audio experience to new heights with the Cloud CV4250 Energy Star Compliant Digital Amplifier with Configurable DSP. With a total power output capability of 1KW, this class-leading amplifier is the perfect choice for venues of all sizes. The Energy Star compliance ensures energy efficiency, while the 4x250W 100V output delivers powerful and crystal-clear sound to every corner of your space. Take complete control over your sound system with the configurable DSP functionality, allowing you to optimise EQ, adjust output levels, and set delays with ease. Whether you're setting up a multi-channel system or bi-amping, the Cloud CV4250 provides unparalleled flexibility and performance. Upgrade your audio setup today and experience professional-grade sound quality like never before.Specifications:- Total Power Output: 1KW- Output: 4x250W 100V- Form Factor: 2UProduct Specifications General Output Power: Total output power 1 kW, all channels1 Output Voltage: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 20 kHz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Amplifier Protection: Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical & Dimensions Height: 88mm Width: 482.6mm Depth: 381.8mm Weight: 7.26kg

Read more less

Elevate your audio experience with the Cloud CV2500 Energy Star Compliant Digital Amplifier. This class-leading amplifier from Cloud Electronics, UK, delivers a total power output capability of 1KW, making it a versatile and powerful addition to any sound system. The amplifier is Energy Star compliant, ensuring high efficiency while providing exceptional sound performance. Enjoy customisable sound with the configurable DSP functionality that allows you to fine-tune audio to your preferences. Control the input routing, EQ settings, output levels, and more with ease for an optimised listening experience. Compatible with standard Cloud RL Series remote level control plates, the CV2500 offers convenient control over amplifier settings, making it ideal for various applications. Upgrade your sound system to a new level with this amplifier suitable for multi-channel setups, venues, buildings, and more. The Cloud CV2500 combines efficiency, flexibility, and control to deliver a superior audio experience.Key Specifications:- Power Output: 2x500W- Total Power Output Capability: 1KW- Energy Efficiency: Energy Star Compliant- DSP Functionality: Configurable for custom sound tuning- Control: Compatible with standard Cloud RL Series remote level control plates- Dimensions: 2U Rack MountableProduct Specifications General Output Power: Total output power 1 kW, all channels1 Output Voltage: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 20 kHz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Amplifier Protection: Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical & Dimensions Height: 88mm Width: 482.6mm Depth: 381.8mm Weight: 6.86kg

Read more less

Experience unrivalled audio performance with the Cloud CVA8125 Energy Efficient Power Amp with DSP 8x125W LowZ/100V 2U. This state-of-the-art amplifier from Cloud Electronics, UK, is meticulously crafted to take your sound system to new heights. Unleash crystal-clear sound quality, unmatched power, and energy efficiency at its finest with the Cloud CVA8125. Why choose the Cloud CVA8125 Energy Efficient Power Amp:- Unmatched Power: 8 channels delivering 125W each ensure optimal performance for all your audio needs.- Energy Efficiency: Benefit from the latest Class D technology for powerful sound output while saving energy in the long run.- Versatile Functionality: Features switch-on delay for speaker protection, power sharing capability of up to 500W per channel, and user-configurable DSP functionality.- Flexible Power Sharing: Enjoy the capability to share power up to 500W per channel in 70/100V-line mode.Enhance your sound quality, transform your performance, and immerse yourself in a world of unparalleled audio excellence with the Cloud CVA8125 Energy Efficient Power Amp. Elevate your events or installations with the industry-leading technology packed into this powerhouse amplifier. Specifications:- Channels: 8 channels- Power: 125W per channel- Energy Efficiency: Class D technology- Power Sharing Capability: Up to 500W per channel- Additional Features: Switch-on delay, user-configurable DSP functionalityProduct Specifications Output Power: Total output power 1 kW, all channels Output Voltage: 70/100v line (RMS) / 4Ω / 8Ω / 16Ω low-impedance. Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 200 Hz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Normal Operating Temperature: 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption: Standby: 2.5 W, 24.4 VA Idle: 59.7 W, 89.3 VA 1/8th power: 207.0 W, 248.8 VA 1/3rd power: 352.6 W, 387.5 VA Heat loss: Standby: 9.1 KJ/hr (8.7 BTU/hr Idle: 215.0 KJ/hr (203.9 BTU/hr) 1/8th power: 278.7 KJ/hr (264.3 BTU/hr) 1/3rd power: 334.4 KJ/hr (317.1 BTU/hr) Amplifier Protection: Overcurrent DC Switch-on delay Status Indicators: Protection active, Signal peak, and Signal present Cooling: Variable speed fan Dimensions (W x H x D): 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Weight: 8.05 kg (18.03 lb)

Read more less