Amplifiers

Step into a new realm of audio excellence with the Cloud CVA4250 Energy Efficient Power Amp with DSP 4x250W. This cutting-edge amplifier by Cloud Electronics, UK, is designed to revolutionise your sound system with its advanced features and unparalleled performance. Unleash the Power: Experience the true potential of your speakers with the 4 Channel Class D Power Amplifier delivering 4 x 250 W of pure, crystal-clear sound. The power sharing capability ensures optimal performance by allowing odd and even channel groups to reach a maximum of 500 W each in 70/100 V-line mode. Say goodbye to underpowered audio systems and welcome a new era of immersive sound.DSP Functionality at Your Fingertips: Take control of your audio like never before with the onboard DSP functionality of the Cloud CVA4250. From input routing to multi-band parametric EQ and output level control, this amplifier puts the power of customisation in your hands. With 1.5s of assignable delay and full crossover parameter control, fine-tune your sound to perfection, ensuring every note is delivered with precision and clarity.Versatile and Future-Ready: The CVA4250 is equipped with Ethernet and RS-232 connectivity, allowing seamless integration with third-party control systems like Crestron and AMX. Whether setting up a multi-channel system, bi-amping, or configuring auxiliary outputs, this amplifier offers unparalleled flexibility and adaptability to suit your unique audio needs.Specifications:- Power: 4 x 250 W- Power Sharing Capability: Odd and even channel groups can deliver up to 500 W each in 70/100 V-line mode- DSP Functionality: Input routing, room and speaker optimisation EQ, output level control- Connectivity: Ethernet and RS-232- Control Systems Compatibility: Crestron, AMXProduct Specifications Output Power: Total output power 1 kW, all channels Output Voltage: 70/100v line (RMS) / 4Ω / 8Ω / 16Ω low-impedance. Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 200 Hz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Normal Operating Temperature: 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption: Standby: 2.43 W, 24.0 VA Idle: 38.9 W, 60.0 VA 1/8th power: 187.4 W, 227.2 VA 1/3rd power: 330.1 W, 368.8 VA Heat loss: Standby: 8.7 KJ/hr (8.3 BTU/hr) Idle: 140.1 KJ/hr (132.9 BTU/hr) 1/8th power: 217.9 KJ/hr (206.7 BTU/hr) 1/3rd power: 263.5 KJ/hr (249.9 BTU/hr) Amplifier Protection: Overcurrent DC Switch-on delay Status Indicators: Protection active, Signal peak, and Signal present Cooling: Variable speed fan Dimensions (W x H x D): 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Weight: 7.26 kg (16.26 lb)

Read more less

Elevate your audio system to unmatched levels with the Cloud CVA2500 Energy Efficient Power Amp with DSP. This powerhouse amplifier delivers a potent 2 x 500W output, ensuring flawless sound quality in every setup. The advanced features of this amplifier make it a must-have for audio enthusiasts and professionals alike.Monitor and control your audio easily with per-channel front panel LEDs for signal presence, peak level, and protection activity. The onboard DSP functionality allows for customised audio optimisation, including input routing and multi-band parametric EQ, ensuring precise sound adjustments tailored to your preferences.The Cloud CVA2500 boasts a switch-on delay feature that safeguards your speakers during power-up, while the balanced line level inputs and Ethernet/DSP capabilities offer seamless integration into your audio system. Fine-tune your sound with multi-band parametric EQ and output level control, achieving audio perfection with every note.Key Specifications:- Power Output: 2 x 500W- Amplifier Type: Class D- Inputs: Balanced line level inputs- DSP Functionality: Multi-band parametric EQ and output level controlProduct Specifications Output Power: Total output power 1 kW, all channels Output Voltage: 70/100v line (RMS) / 4Ω / 8Ω / 16Ω low-impedance. Frequency Response: 20 Hz to 20 kHz, +/-0.5 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches -3 dB @ 20 Hz to 200 Hz via DSP configuration Distortion: 0.03%THD @1 kHz, 1 dB below rated output Noise: -94 dB, 22 Hz to 22 kHz Crosstalk: < -90 dB @1 kHz, -82 dB @10 kHz adjacent channels <-107 dB @1 kHz, -93 dB @10 kHz non-adjacent channels All tested with 125 W load Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Remote level control connectors: 3-pole 5 mm-pitch plug-in screw-terminal connectors Compatible with Cloud RL Series remote control plates Power input: 85 to 264 V AC, 40 to 60 Hz Mains protection: Class 3T 250 V fuse, 20 x 5 mm, rating T8A Normal Operating Temperature: 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption: Standby: 2.34 W, 12.4 VA Idle: 27.1 W, 46.7 VA 1/8th power: 164.2 W, 201.3 VA 1/3rd power: 380.7 W, 421.1 VA Heat loss: Standby: 8.4 KJ/hr (8.0 BTU/hr) Idle: 97.3 KJ/hr (92.5 BTU/hr 1/8th power: 179 KJ/hr (169.7 BTU/hr 1/3rd power: 293.3 KJ/hr (278.7 BTU/hr Amplifier Protection: Overcurrent DC Switch-on delay Status Indicators: Protection active, Signal peak, and Signal present Cooling: Variable speed fan Dimensions (W x H x D): 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Weight: 6.86 kg (15.37 lb)

Read more less

- 8 channels with auto power sharing feature for efficient power distribution- Versatile output mode selectable per-channel for flexibility in use- Energy-efficient Class D output stages with safety features for reliable performanceExperience unparalleled audio power and versatility with the Cloud CA8125 Auto Power Sharing Amplifier. With 8 channels and an innovative auto power sharing feature, this amplifier ensures efficient power distribution for optimal performance. Each channel offers a versatile output mode selectable per-channel, providing you with the flexibility to customise your audio setup according to your needs.Designed with energy efficiency in mind, the Class D output stages of the Cloud CA8125 Amplifier deliver exceptional savings in weight and size compared to traditional designs. Safety features such as output DC detection, overcurrent protection, and thermal monitoring guarantee reliable performance and peace of mind. The switch-on delay feature provides speaker protection during power-up, ensuring longevity for your audio equipment.Ideal for sound reinforcement applications in various sectors, including retail, leisure, hospitality, commercial, and industrial settings, the Cloud CA8125 Amplifier is a must-have for those seeking high-quality audio amplification. Elevate your audio experience with this advanced amplifier that combines power, efficiency, and safety features for a seamless performance every time.Product Specifications Performance Output Power: CA2250: total output power 500 W, both channels CA2500/CA4250/CA6160/CA8125: total output power 1 kW, all channels Outputs: Low-impedance: 4 ohms or 8 ohms (selectable) High-impedance: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical) Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Power input: 85 to 265 V AC, 50 to 60 Hz Mains protection: Internal fuses: CA2250: 1 x 250 V fuse, 20 x 5 mm, rating T4AH CA2500, CA4250, CA6160, CA8125: 2 x 250 V fuses, 20 x 5 mm, rating T4AH Normal operating temperature 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption Standby & APD: 2.353 W (23.77 VA) Mute: 25.91 W (48.7 VA) Idle: 53.8 W (78.77 VA) 1/8th power: 183.5 W (219.8 VA) 1/3rd power: 387.5 W (411.8 VA) Heat loss Standby & APD: 8.5 kJ/hr (8.0 BTU/hr) Mute: 93.3 kJ/hr (88.5 BTU/hr) Idle: 193.7 kJ/hr (183.7 BTU/hr) 1/8th power: 211.0 kJ/hr (200.1 BTU/hr) 1/3rd power: 242.7 kJ/hr (230.2 BTU/hr) Amplifier Protection Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical Dimensions (W x H x D): Net CA2250: 482.6 mm x 88 mm x 231.3 mm (19 in x 3.46 in x 9.11 in) CA2500, CA4250, CA6160, CA8125: 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Shipping CA2250: tbc CA2500, CA4250, CA6160, CA8125: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in) Weight Net CA2250: 4.50 kg (10.1 lb) CA2500: 6.75 kg (15.1 lb) CA4250: 7.10 kg (15.9 lb) CA6160: 7.55 kg (16.9lb) CA8125: 7.95 kg (17.8 lb) Shipping CA2250: tbc CA2500: 8.75 kg (15.1 lb) CA4250: 9.10 kg (15.9 lb) CA6160: 9.55 kg (16.9lb) CA8125: 9.95 kg (17.8 lb)

Read more less

Experience unparalleled audio power and versatility with the Cloud CA6160 Auto Power Sharing Amplifier. This intelligent amplifier features 6 channels, each delivering 160W, making it an ideal choice for sound reinforcement in retail, leisure, hospitality, commercial, or industrial environments. The output mode can be custom-selected per channel, allowing for driving various types of loudspeakers with ease. Boasting energy-efficient Class D output stages with an automatic power-down feature and standby/wake-up function, this amplifier ensures not only robust performance but also reduced power consumption and convenient operation.The Cloud CA6160 Amplifier is equipped with safety features such as output DC detection, overcurrent protection, and thermal monitoring to guarantee peace of mind during operation. This versatile amplifier is designed to handle different types and numbers of loudspeakers in diverse building areas efficiently. Elevate your audio system with the Cloud CA6160 and enjoy a blend of power, flexibility, and energy efficiency in its compact 2U design.Specifications:- Channels: 6- Power Output: 160W per channel- Impedance: 4Ω/8Ω- Operating Voltage: 100V- Output Modes: Selectable per channel- Design: Class D output stages- Power Consumption: Below 2.5W in standby mode- Safety Features: Output DC detection, overcurrent protection, thermal monitoring- Standby/Wake-up: Remote operation with external contact closure- Enclosure: 2U compact designProduct Specifications Performance Output Power: CA2250: total output power 500 W, both channels CA2500/CA4250/CA6160/CA8125: total output power 1 kW, all channels Outputs: Low-impedance: 4 ohms or 8 ohms (selectable) High-impedance: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical) Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Power input: 85 to 265 V AC, 50 to 60 Hz Mains protection: Internal fuses: CA2250: 1 x 250 V fuse, 20 x 5 mm, rating T4AH CA2500, CA4250, CA6160, CA8125: 2 x 250 V fuses, 20 x 5 mm, rating T4AH Normal operating temperature 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption Standby & APD: 2.284 W (23.55 VA) Mute: 26.87 W (48.15 VA) Idle: 43.45 W (66.54 VA) 1/8th power: 170.2 W (205.8 VA) 1/3rd power: 378.5 W (403.5 VA) Heat loss Standby & APD: 8.2 kJ/hr (7.8 BTU/hr) Mute: 96.7 kJ/hr (91.7 BTU/hr) Idle: 156.4 kJ/hr (148.3 BTU/hr) 1/8th power: 179.5 kJ/hr (170.2 BTU/hr) 1/3rd power: 211.3 kJ/hr (200.4 BTU/hr) Amplifier Protection Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical Dimensions (W x H x D): Net CA2250: 482.6 mm x 88 mm x 231.3 mm (19 in x 3.46 in x 9.11 in) CA2500, CA4250, CA6160, CA8125: 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Shipping CA2250: tbc CA2500, CA4250, CA6160, CA8125: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in) Weight Net CA2250: 4.50 kg (10.1 lb) CA2500: 6.75 kg (15.1 lb) CA4250: 7.10 kg (15.9 lb) CA6160: 7.55 kg (16.9lb) CA8125: 7.95 kg (17.8 lb) Shipping CA2250: tbc CA2500: 8.75 kg (15.1 lb) CA4250: 9.10 kg (15.9 lb) CA6160: 9.55 kg (16.9lb) CA8125: 9.95 kg (17.8 lb)

Read more less

Elevate your sound reinforcement setup to new heights with the Cloud CA4250 Auto Power Sharing Amplifier. This advanced amplifier is a game-changer for a range of applications including retail, leisure, hospitality, commercial, and industrial sound systems. Featuring four channels and a potent 4x250W output power, this amplifier ensures crystal-clear audio delivery in any setting. Equipped with versatile functionality, it can drive both low impedance and high impedance loudspeakers directly. The Cloud CA4250 boasts an energy-efficient Class D output stage with safety features like output DC detection, overcurrent protection, and thermal monitoring, ensuring maximum safety and durability. Enjoy the convenience of features such as output mode selectability per channel, balanced line level inputs, and per-channel output level controls, all designed for ease of use and flexibility in sound management. With a universal power supply that operates seamlessly from 100 to 240 VAC, this amplifier provides flexibility in various power settings. Say goodbye to concerns about speaker protection during power-up, thanks to the switch-on delay feature. The intelligent power sharing capability allows efficient distribution of the 1kW of audio power across different areas, making it perfect for diverse venues.Specifications:- Channels: 4- Output Power: 4x250W- Power Supply: 100-240 VAC- Output Stage: Class D- Safety Features: Output DC detection, overcurrent protection, thermal monitoringProduct Specifications Performance Output Power: CA2250: total output power 500 W, both channels CA2500/CA4250/CA6160/CA8125: total output power 1 kW, all channels Outputs: Low-impedance: 4 ohms or 8 ohms (selectable) High-impedance: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical) Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Power input: 85 to 265 V AC, 50 to 60 Hz Mains protection: Internal fuses: CA2250: 1 x 250 V fuse, 20 x 5 mm, rating T4AH CA2500, CA4250, CA6160, CA8125: 2 x 250 V fuses, 20 x 5 mm, rating T4AH Normal operating temperature 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption Standby & APD: 1.925 W (23.77 VA) Mute: 22.37 W (41.97 VA) Idle: 33.72 W (53.87 VA) 1/8th power: 170.0 W (192.3 VA) 1/3rd power: 391.0 W (416.0 VA) Heat loss Standby & APD: 6.9 kJ/hr (6.6 BTU/hr) Mute: 80.5 kJ/hr (76.4 BTU/hr) Idle: 121.4 kJ/hr (115.1 BTU/hr) 1/8th power: 164.9 kJ/hr (156.4 BTU/hr) 1/3rd power: 210.0 kJ/hr (199.1 BTU/hr) Amplifier Protection Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical Dimensions (W x H x D): Net CA2250: 482.6 mm x 88 mm x 231.3 mm (19 in x 3.46 in x 9.11 in) CA2500, CA4250, CA6160, CA8125: 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Shipping CA2250: tbc CA2500, CA4250, CA6160, CA8125: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in) Weight Net CA2250: 4.50 kg (10.1 lb) CA2500: 6.75 kg (15.1 lb) CA4250: 7.10 kg (15.9 lb) CA6160: 7.55 kg (16.9lb) CA8125: 7.95 kg (17.8 lb) Shipping CA2250: tbc CA2500: 8.75 kg (15.1 lb) CA4250: 9.10 kg (15.9 lb) CA6160: 9.55 kg (16.9lb) CA8125: 9.95 kg (17.8 lb)

Read more less

Experience unparalleled audio power and versatility with the Cloud CA2500 Auto Power Sharing Amplifier. Ideal for a wide range of sound reinforcement applications, this 2-channel amplifier is designed to meet the demands of diverse settings, from retail stores to industrial facilities. The auto power sharing feature intelligently distributes up to 1kW of audio power between channels, allowing for efficient driving of different types and numbers of loudspeakers. The energy-efficient Class D output stages provide substantial weight and size savings compared to traditional designs, ensuring both performance and portability. Safety features such as output DC detection, overcurrent protection, and thermal monitoring guarantee reliable operation in any environment. The switch-on delay feature enhances speaker protection during power-up, contributing to the longevity of your audio equipment. Whether you need to drive low impedance loudspeakers or high impedance (100V-line or 70V-line) distribution systems, the Cloud CA2500 Auto Power Sharing Amplifier delivers exceptional audio quality and flexibility.Specifications:- Channels: 2- Power Output: 2x500W- Impedance: 4Ω/8Ω- Voltage: 100V- Rack Size: 2U- Class: D- Safety Features: Output DC detection, overcurrent protection, thermal monitoring- Additional Feature: Switch-on delay for speaker protectionProduct Specifications Performance Output Power: CA2250: total output power 500 W, both channels CA2500/CA4250/CA6160/CA8125: total output power 1 kW, all channels Outputs: Low-impedance: 4 ohms or 8 ohms (selectable) High-impedance: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical) Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Power input: 85 to 265 V AC, 50 to 60 Hz Mains protection: Internal fuses: CA2250: 1 x 250 V fuse, 20 x 5 mm, rating T4AH CA2500, CA4250, CA6160, CA8125: 2 x 250 V fuses, 20 x 5 mm, rating T4AH Normal operating temperature 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption Standby & APD: 1.919 W (24.29 VA) Mute: 17.87 W (36.85 VA) Idle: 24.33 W (43.6 VA) 1/8th power: 165.1 W (193.5 VA) 1/3rd power: 388.0 W (415.4 VA) Heat loss Standby & APD: 6.9 kJ/hr (6.6 BTU/hr) Mute: 64.3 kJ/hr (61.0 BTU/hr) Idle: 87.6 kJ/hr (83.1 BTU/hr) 1/8th power: 108.3 kJ/hr (102.7 BTU/hr) 1/3rd power: 197.3 kJ/hr (187.1 BTU/hr) Amplifier Protection Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical Dimensions (W x H x D): Net CA2250: 482.6 mm x 88 mm x 231.3 mm (19 in x 3.46 in x 9.11 in) CA2500, CA4250, CA6160, CA8125: 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Shipping CA2250: tbc CA2500, CA4250, CA6160, CA8125: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in) Weight Net CA2250: 4.50 kg (10.1 lb) CA2500: 6.75 kg (15.1 lb) CA4250: 7.10 kg (15.9 lb) CA6160: 7.55 kg (16.9lb) CA8125: 7.95 kg (17.8 lb) Shipping CA2250: tbc CA2500: 8.75 kg (15.1 lb) CA4250: 9.10 kg (15.9 lb) CA6160: 9.55 kg (16.9lb) CA8125: 9.95 kg (17.8 lb)

Read more less

Elevate your sound setup with the Cloud CA2250 Auto Power Sharing Amplifier 2x250W 2-Channel. This advanced amplifier offers unparalleled versatility and efficiency for a variety of sectors, including retail, leisure, hospitality, commercial, or industrial settings. With a powerful 2x250W output that can be shared between its two channels, this amplifier is perfect for driving low impedance loudspeakers or high impedance 100V-line systems directly.Featuring output mode selectability per channel, balanced line level inputs, and per-channel output level controls, the Cloud CA2250 provides unmatched flexibility and control over your audio setup. The automatic power down feature ensures energy efficiency, consuming less than 2.5W when all channels are quiescent.Ensure safety and protection with features like output DC detection, overcurrent protection, thermal monitoring, and a switch-on delay for speaker protection during power-up. Upgrade your sound system to experience high-quality audio with peace of mind.Specifications:- Amplifier Type: 2-Channel- Power Output: 2x250W- Output Impedance: 4Ω/8Ω- Voltage: 100V- Rack Units: 2UProduct Specifications Performance Output Power: CA2250: total output power 500 W, both channels CA2500/CA4250/CA6160/CA8125: total output power 1 kW, all channels Outputs: Low-impedance: 4 ohms or 8 ohms (selectable) High-impedance: 70 V or 100 V (rms) Frequency Response: 20 Hz to 20 kHz, +0 dB/-1 dB High Pass Filter: -3 dB @ 65 Hz via rear panel switches Distortion: 0.019%THD+N @1 kHz, 1 dB below rated output Noise: -94 dBr, 22 Hz to 22 kHz, relative to full power Crosstalk: Ch1 to Ch2: < -98 dB @1 kHz, -79 dB @10 kHz Other channel combinations: -107 dB @1 kHz, -98 dB @10 kHz (typical) Inputs Connectors: 3-pole 3.5 mm-pitch plug-in screw-terminal connectors Sensitivity: 0 dBu (0.775 Vrms) Input Impedance: 10 kohms (balanced); 5 kohms (unbalanced) General Output connectors: 2-pole 5 mm-pitch plug-in screw-terminal connectors Power input: 85 to 265 V AC, 50 to 60 Hz Mains protection: Internal fuses: CA2250: 1 x 250 V fuse, 20 x 5 mm, rating T4AH CA2500, CA4250, CA6160, CA8125: 2 x 250 V fuses, 20 x 5 mm, rating T4AH Normal operating temperature 0 °C to 35 °C (Note performance and specifications cannot be guaranteed outside this range) Power Consumption Standby & APD: 0.795 W (12.43 VA) Mute: 11.24 W (21.09 VA) Idle: 17.07 W (28.13 VA) 1/8th power: 88.33 W (105.8 VA) 1/3rd power: 200.9 W (213.5 VA) Heat loss Standby & APD: 2.9 kJ/hr (2.7 BTU/hr) Mute: 40.5 KJ/hr (38.4 BTU/hr) Idle: 61.5 kJ/hr (58.3 BTU/hr) 1/8th power: 91.7 kJ/hr (87.0 BTU/hr) 1/3rd power: 122.5 kJ/hr (116.1 BTU/hr) Amplifier Protection Overcurrent DC Thermal monitoring Switch-on delay Status Indicators: Power applied, Protection active, Signal peak, and Signal present Cooling: Variable speed fan Physical Dimensions (W x H x D): Net CA2250: 482.6 mm x 88 mm x 231.3 mm (19 in x 3.46 in x 9.11 in) CA2500, CA4250, CA6160, CA8125: 482.6 mm x 88 mm x 381.8 mm (19 in x 3.46 in x 15.03 in) Shipping CA2250: tbc CA2500, CA4250, CA6160, CA8125: 606 mm x 164 mm x 558 mm (23.9 in x 6.5 in x 22 in) Weight Net CA2250: 4.50 kg (10.1 lb) CA2500: 6.75 kg (15.1 lb) CA4250: 7.10 kg (15.9 lb) CA6160: 7.55 kg (16.9lb) CA8125: 7.95 kg (17.8 lb) Shipping CA2250: tbc CA2500: 8.75 kg (15.1 lb) CA4250: 9.10 kg (15.9 lb) CA6160: 9.55 kg (16.9lb) CA8125: 9.95 kg (17.8 lb)

Read more less

Elevate your audio projects with the Apart Revamp 8250 8Ch Class D Amplifier. This powerful amplifier allows you to create up to 8 zones in mono, 4 zones in stereo, or innovative bridged configurations, offering unparalleled flexibility. The intelligent variable speed cooling fan ensures optimal performance, reliability, and longevity even during extended use. With 8 channels packed into one sleek unit, the Revamp 8250 saves you both money and space, making it the perfect choice for your next installation project.Key specifications:- Power Output: 8 x 250W @ 4Ω, 4 x 500W @ 8Ω- Size: 2U- Cooling System: Variable speed cooling fanProduct Specifications General Dynamic output power 4 ohms: 8 x 350 watts RMS output power 4 ohms: 8 x 250 watts Dynamic output power 8 ohms: 8 x 175 watts RMS output power 8 ohms: 8 x 125 watts Dynamic output power bridged 8 ohms: 4 x 650 watts Output power RMS bridged 8 ohms: 4 x 500 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 2200 watts Power supply: 115 - 230 VAC Power supply technology: switching mode power supply Output channels: 8 Line input balanced: 8 Line input unbalanced: 8 Channel separation: > 60 dB @ 1 kHz Power amp topology: class-D Applicable in 100V: no Applicable low impedance: yes Physical & Dimensions Height: 88mm Width: 483mm Depth: 330mm Weight: 21.7kg

Read more less

Experience top-notch audio performance with the Apart Revamp 4240T Professional 4-Channel Class D Amplifier. Elevate your sound system with this versatile amplifier, delivering 4 x 240 watts at 100 volts (4 ohms) and bridgeable to 2 x 480 watts at 100 volts. Engineered with a high-efficient SMPS power supply and Class D output topology, this amplifier ensures optimal audio quality with crisp, clear, and powerful sound output. The built-in 250 Hz HP-filter maximises system performance on horn speakers, while the intelligent variable speed cooling fan guarantees reliable operation, even in emergency situations.The Apart Revamp 4240T amplifier is designed for flexibility, allowing for setups with 4 zones in mono, 2 zones in stereo, or a bridged dual mono/stereo system. The intuitive front display provides easy monitoring, and the custom limiter feature ensures dynamic and controlled sound at all times. This professional-grade amplifier is perfect for those seeking high-tech features, reliability, and versatility in their sound systems.Specifications:- Channels: 4- Power Output: 4 x 240W at 100V or 4 ohms, bridgeable to 2 x 480W at 100V- Power Supply: High-efficient SMPS- Output Topology: Class D- HP-Filter: Built-in 250 Hz- Cooling System: Intelligent variable speed cooling fanProduct Specifications General Dynamic output power 8 ohms: 4 x 120 watts Dynamic output power bridged 8 ohms: 2 x 480 watts Output power RMS 100 volts: 4 x 240 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 1050 watts Height- rack units (1U=44 mm): 2 U Power supply technology: 2 x switching mode power supply Output channels: 4 Line input unbalanced: 4 Power amp topology: Class-D Cooling system: Fan Applicable low impedance: Yes RMS output power 4 ohms: 4 x 240 watts RMS output power 8 ohms: 4 x 120 watts Output power RMS bridged 8 ohms: 2 x 480 watts Output power RMS bridged 100 volts: 2 x 480 watts Minimum impedance load bridged per channel: 8 ohms 19" (483 mm wide) rack mounting: Yes Power supply: 115 - 230 VAC Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms Line input balanced: 4 Channel separation: > 68 dB @ 1 kHz Frequency response (in Hz): 50 - 20 k Applicable in 100V: Yes Physical & Dimensions Height: 88mm Depth (incl front): 338 mm Depth (build in): 330mm Weight: 16.7kg

Read more less

Unleash the unparalleled power and precision of the Apart Revamp 4120T 4Ch Class D Amplifier with 4 x 120W output power. This professional-grade amplifier is designed to elevate your sound system to new heights, offering exceptional performance and versatility for a wide range of audio applications. With 4 channels delivering 120 watts each at 100 volts (4 ohms), this amplifier ensures crystal-clear and powerful sound reproduction in any setting. Bridgeable to 2 x 240 watts, it provides added flexibility to customise your system according to your specific requirements. The Apart Revamp 4120T features a high efficient SMPS power supply, Class D output topology, and output transformers for optimal efficiency and performance. Equipped with a built-in 250 Hz HP-filter, this amplifier is perfectly compatible with horn speakers, making it ideal for various audio setups. The intelligent variable speed cooling fan ensures reliable operation, while the input sensitivity adjustment allows for personalised configuration. Elevate your audio experience with the Apart Revamp 4120T amplifier, offering ease of use, high-tech features, and unmatched reliability for creating exceptional soundscapes.Specifications:- Output Power: 4 x 120W at 100V (4 ohms)- Bridgeable to: 2 x 240W- Power Supply: SMPS- Output Topology: Class D- HP-Filter: 250 Hz- Cooling Fan: Variable speed- Input Sensitivity AdjustmentProduct Specifications General Dynamic output power 4 ohms: 4 x 120 watts Dynamic output power 8 ohms: 4 x 60 watts Dynamic output power bridged 8 ohms: 2 x 240 watts Output power RMS 100 volts: 4 x 120 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 525 watts Height- rack units (1U=44 mm): 2 U Power supply technology: switching mode power supply Output channels: 4 Line input unbalanced: 4 Power amp topology: class-D Cooling system: fan Applicable low impedance: yes RMS output power 4 ohms: 4 x 120 watts RMS output power 8 ohms: 4 x 60 watts Output power RMS bridged 8 ohms: 2 x 240 watts Output power RMS bridged 100 volts: 2 x 240 watts Minimum impedance load bridged per channel: 8 ohms 19" (483 mm wide) rack mounting: yes Power supply: 115 - 230 VAC Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms Line input balanced: 4 Channel separation: > 68 dB @ 1 kHz Frequency response (in Hz): 50 - 20 k Applicable in 100V: yes Physical & Dimensions Height: 88mm Depth (incl front): 338mm Depth (build in): 330mm Weight: 12.1kg

Read more less

Experience unparalleled sound quality with the Apart Revamp 4100 4Ch Class D Fanless Amplifier. This professional-grade amplifier is meticulously crafted to deliver powerful and crystal-clear audio reproduction for your sound system. With a dynamic output power of 4 x 110 watts at 4 ohms, it ensures every audio detail is heard with pristine clarity. The amplifier is engineered with enhanced speaker and amp protection circuits, including DC protection, over current protection, and over temperature protection, to safeguard your equipment and maintain optimal performance. Moreover, the REVAMP4100 offers flexible bridging options, allowing you to customise your audio setup with 2 stereo channels. The convection cooling system ensures efficient heat dissipation, while the sleek black finish adds a touch of sophistication to your audio system. Elevate your audio experience to new heights with the Apart Revamp 4100 4Ch Class D Fanless Amplifier.Specifications:- Output Power: 4 x 110 watts at 4 ohms- Protection Circuits: DC protection, over current protection, over temperature protection- Bridging Options: Can be bridged into 2 stereo channelsProduct Specifications General Dynamic output power 4 ohms: 4 x 110 watts Dynamic output power 8 ohms: 4 x 55 watts Dynamic output power bridged 8 ohms: 2 x 200 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 500 watts Height- rack units (1U=44 mm): 1 U Power supply: 100 - 254 VAC Output channels: 4 Line input unbalanced: 4 Power amp topology: class-D Cooling system: convection Applicable low impedance: Yes RMS output power 4 ohms: 4 x 100 watts RMS output power 8 ohms: 4 x 50 watts Output power RMS bridged 8 ohms: 2 x 225 watts Minimum impedance load bridged per channel: 8 ohms Power supply technology: switching mode power supply Line input balanced: 4 Channel separation: > 65 dB @ 1 kHz Frequency response (in Hz): 20 - 22 k Applicable in 100V: No Physcial & Dimensions Height: 44 mm Depth (build in): 230mm Depth (incl front): 239mm Net weight: 3.5kg

Read more less

Elevate your audio experience to unparalleled heights with the Apart Revamp 2600 2Ch Class H Amplifier. This professional-grade 2-channel power amplifier delivers a formidable 2 x 600 watts output power at 4 ohms, making it the ideal choice for venues like fitness centres or stereo applications where high power is a necessity. Equipped with a digital signal processor, effortlessly select from 10 preset operating modes with just a simple push of a button. The intelligent variable speed cooling fan ensures optimal performance, while the automatic protection system steps in to decrease output power temporarily in case of a thermal overload. Enjoy exceptional dynamic sound and musicality with features like compressor/limiter topology. This amplifier offers versatile configuration with 9 presets available, including options like linking channels and applying high pass filters. Invest in the Apart Revamp 2600 2Ch Class H Amplifier for reliable performance, high output power, and advanced technology that will transform your audio setup.Specifications:- Output Power: 2 x 600 watts @ 4 ohms- Digital Signal Processor with 10 presets- Intelligent variable speed cooling fan- Automatic protection system- Compressor/limiter topology for dynamic sound- 9 presets for versatile configurationProduct Specifications General Dynamic output power 4 ohms: 2 x 840 watts RMS output power 4 ohms: 2 x 600 watts Dynamic output power 8 ohms: 2 x 420 watts RMS output power 8 ohms: 2 x 300 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 1840 watts Power supply: 230 VAC Power supply technology: toroidal transformer Output channels: 2 Line input balanced: 2 Line input unbalanced: 2 Channel separation: > 67 dB @ 1 kHz Power amp topology: class-H Frequency response (in Hz): 10 - 24 k Cooling system: fan Applicable low impedance: yes Physical & Dimensions Height: 2U Depth (build in): 334mm Depth (incl front): 340mm Weight: 12.1kg

Read more less

Elevate your audio system with the Apart Revamp 2250 2Ch Class D Fanless Amplifier. This professional-grade amplifier is designed to take your sound quality to new heights. Delivering 2 x 250 watts output power at 4 ohms, this amplifier ensures exceptional sound clarity and precision, offering an immersive listening experience like no other. The bridgeable feature allows for versatility in configuration, enabling a switch to 1 x 500 watts at 8 ohms when needed. With a high efficient SMPS power supply and Class D output topology, the Revamp 2250 balances energy efficiency with reliable performance. The simple push-button operation at the back of the unit allows for easy mode selection without compromising functionality. Elevate your audio setup to unparalleled levels of quality, versatility, and reliability with the Apart Revamp 2250 2Ch Class D Fanless Amplifier.Specifications:- Output Power: 2 x 250 watts @ 4 ohms, 1 x 500 watts @ 8 ohms- Power Supply: High efficient SMPS- Topology: Class D- Bridgeable: Yes, to 1 x 500 watts @ 8 ohmsProduct Specifications General Dynamic output power 4 ohms: 2 x 350 watts RMS output power 4 ohms: 2 x 250 watts Dynamic output power 8 ohms: 2 x 175 watts RMS output power 8 ohms: 2 x 125 watts Dynamic output power bridged 8 ohms: 700 watts Output power RMS bridged 8 ohms: 500 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 600 watts Power supply: 115 - 230 VAC Power supply technology: switching mode power supply Output channels: 2 Line input balanced: 2 Line input unbalanced: 2 Channel separation: > 74 dB @ 1 kHz Power amp topology: class-D Frequency response (in Hz): 10 - 24 k Cooling system: convection Applicable low impedance: yes Physical & Dimensions Height: 1U Depth (build in): 230mm Depth (incl front): 239mm Weight: 3.10KG

Read more less

Elevate your audio setup with the Apart Revamp 2150 2Ch Class D Fanless Amp. This professional-grade digital power amplifier redefines performance and reliability in the small and mid-sized fixed install audio market. Offering 2 x 165 watts dynamic output power @ 4 ohms, it delivers impressive sound quality. The advanced protection features, including DC protect, over current protect, and over temperature protect, ensure the safety and longevity of your equipment. The versatile connectivity options with balanced and unbalanced inputs, pass-through outputs, and loudspeaker outputs provide flexibility in connecting your audio devices.The convection-cooled design guarantees noiseless and dust-free operation, while the multiple protection circuits safeguard your speakers and amplifier. Its slim, lightweight 1U housing makes installation a breeze, with a rear clip LED indicator for simplified setup. Whether you're a professional installer or an audiophile seeking exceptional sound quality, the Apart Revamp 2150 is your perfect audio companion.Specifications:- Power Output: 2 x 165W @ 4Ω- Input Options: Balanced and unbalanced inputs on euroblock or cinch- Output Options: Pass-through outputs on cinch, loudspeaker outputs on euroblock- Protection Circuits: DC protect, over current protect, over temperature protect- Design: 1U slim and lightweight housing- Connectivity: Versatile connectivity optionsProduct Specifications General Dynamic output power 4 ohms: 2 x 165 watts RMS output power 4 ohms: 2 x 150 watts Dynamic output power 8 ohms: 2 x 95 watts RMS output power 8 ohms: 2 x 80 watts Dynamic output power bridged 8 ohms: 330 watts Output power RMS bridged 8 ohms: 300 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 400 watts 19" (483 mm wide) rack mounting: Yes Height- rack units (1U=44 mm): 1 U Power supply: 115 - 230 VAC Power supply technology: switching mode power supply Output channels: 2 Line input balanced: 2 Line input unbalanced: 2 Channel separation: > 70 dB @ 1 kHz Frequency response (in Hz): 20 - 22 k Power amp topology: class-D Cooling system: convection Applicable in 100V: No Applicable low impedance: Yes Physical & Dimensions Height: 44mm Depth (build in): 230mm Depth (incl front): 239mm Weight: 5.1kg

Read more less

Elevate your audio experience with the Apart Revamp 2120T 2Ch Class D Fanless Amp. This game-changing amplifier delivers 2 x 120 watts output power at 100 volts or 4 ohms, easily bridging into a powerful 240 watts at 100 volts or 8 ohms. Immerse yourself in immaculate sound performance with a convection cooled class-D design that ensures noiseless and dust-free operation, making maintenance worries a thing of the past. The 1U design with a galvanic separated toroidal output transformer shields against external disturbances, providing unparalleled sound quality and reliability. Say hello to uninterrupted sound and versatile installation with multiple inputs and link connectors, making the REVAMP2120T a superior choice for any audio setup.Specifications:- Output Power: 2 x 120 watts at 100 volts or 4 ohms- Bridged Power: 240 watts at 100 volts or 8 ohms- Cooling: Convection cooled class-D design- Design: 1U with galvanic separated toroidal output transformerProduct Specifications General Dynamic output power 4 ohms: 2 x 120 watts Dynamic output power 8 ohms: 2 x 60 watts Dynamic output power bridged 8 ohms: 240 watts Output power RMS 100 volts: 2 x 120 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 300 watts Height- rack units (1U=44 mm): 1 U Power supply: 115 - 230 VAC Output voltage tappings: 100 -70 - 50 - 35 watts - 4 ohms Line input balanced: 2 Channel separation: > 65 dB @ 1 kHz Frequency response (in Hz): 50 - 20 k Applicable in 100V: Yes RMS output power 4 ohms: 2 x 120 watts RMS output power 8 ohms: 2 x 60 watts Output power RMS bridged 8 ohms: 240 watts Output power RMS bridged 100 volts: 240 watts Minimum impedance load bridged per channel: 8 ohms 19" (483 mm wide) rack mounting: Yes Power supply technology: Switching mode power supply Output channels: 2 Line input unbalanced: 2 Power amp topology: Class-D Cooling system: Convectional Applicable low impedance: Yes Physical & Dimensions Height: 44mm Depth (incl front): 239mm Depth (build in): 230mm Weight product: 6.1kg

Read more less

Immerse yourself in a world of professional sound amplification with the Apart Revamp 2060T 2Ch Class D Fanless Amplifier. This sleek amplifier is a powerhouse, offering 2 x 60 watts output power at 100 volts or 4 ohms, which can be bridged into a potent 120 watts at 100 volts or 8 ohms single amplifier. With a galvanic separated toroidal output transformer built-in, this amplifier shields against external disturbances to ensure clean and high-quality audio output. The maintenance-free, fanless design operates silently, making it ideal for professional installations where reliability and pristine sound quality are paramount. The LED indicator simplifies setup, and the slim 1U design adds elegance to your audio setup. Elevate your sound system with the Apart Revamp 2060T, the ultimate choice for reliability, power, and performance.- Channels: 2- Output Power: 2 x 60 watts at 100 volts or 4 ohms- Bridgeable Output Power: 120 watts at 100 volts or 8 ohms- Output Transformer: Galvanic separated toroidal- Design: Fanless, 1U rack-mountable- Special Feature: LED indicator for input gain configurationProduct Specifications General Dynamic output power 4 ohms: 2 x 60 watts Dynamic output power 8 ohms: 2 x 30 watts Dynamic output power bridged 8 ohms: 120 watts Output power RMS 100 volts: 2 x 60 watts Minimum impedance load per channel: 4 ohms Power consumption (max): 175 watts Height- rack units (1U=44 mm): 1U Power supply technology: Switching mode power supply output channels: 2 Line input unbalanced: 2 Power amp topology: Class-D Cooling system: Convectional Applicable low impedance: Yes RMS output power 4 ohms: 2 x 60 watts RMS output power 8 ohms: 2 x 30 watts Output power RMS bridged 8 ohms: 120 watts Output power RMS bridged 100 volts: 120 watts Minimum impedance load bridged per channel: 8 ohms 19" (483 mm wide) rack mounting: Yes Power supply: 115 - 230 VAC Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms Line input balanced: 2 Channel separation: > 65 db @ 1kHz Frequency response (in Hz): 50 - 20 k Applicable in 100V: Yes Physical & Dimensions Height: 44mm Depth (incl front): 239 mm Depth (build in): 230 mm Weight: 5.7kg

Read more less

Elevate your audio experience to unmatched heights with the Apart Revamp 1680 16Ch Class D Amplifier. Featuring 16 channels of digital power, this powerhouse delivers a remarkable 80 watts of output power per channel at 4 ohms, with the ability to bridge to 8 x 160 watts at 8 ohms for unparalleled versatility. With very low standby consumption of less than 0.5 watts, this amplifier ensures high-performance audio without excessive energy use. Seamlessly integrate into any audio project with 2 stereo bus inputs and pass through feature, reducing cable clutter and simplifying installation. Take full control of your audio system with the intelligent power management system, allowing you to trigger the unit on or off, based on your preference. Experience crystal-clear audio quality and professional-grade amplification with the Apart Revamp 1680.Specifications:- Output Power: 80 watts @ 4 ohms per channel, 160 watts @ 8 ohms when bridged- Standby Consumption: Less than 0.5 watts- Inputs: 2 stereo bus inputs with pass through- Power Management: Trigger input for easy power on/off controlProduct Specifications General Dynamic output power 4 ohms: 16 x 100 watts RMS output power 4 ohms: 16 x 80 watts Dynamic output power 8 ohms: 16 x 60 watts RMS output power 8 ohms: 16 x 40 watts Dynamic output power bridged 8 ohms: 8 x 200 watts Output power RMS bridged 8 ohms: 8 x 160 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 1350 watts Power supply: 115 - 230 VAC Power supply technology: toroidal transformers Output channels: 16 Line input unbalanced: 20 Channel separation: > 68 dB @ 1 kHz Power amp topology: class-D Frequency response (in Hz): 20 - 30 k Cooling system: convection Applicable low impedance: yes Physical & Dimensions Height: 3U Depth (build in): 405mm Depth (incl front): 421mm Weight: 21.7kg

Read more less

Introducing the Apart Revamp 1120T 1Ch Class D Fanless Amplifier, a pinnacle of innovation and reliability within the professional audio amplification sphere. This powerhouse of audio prowess offers 1 x 120 watts output power at 100 volts (or at 4 ohms), ensuring exceptional sound quality and performance in any installation scenario. The amplifier's Class-D technology, combined with a built-in galvanic separated toroidal output transformer, guarantees a pristine and interference-free audio signal, making it an ideal choice for critical audio applications.Say goodbye to noisy cooling fans and constant maintenance with the Revamp 1120T's convection-cooled design. This maintenance-free amplifier operates silently and stays dust-free, catering perfectly to environments where noise levels and cleanliness are paramount. Its compact 1U chassis design without front control options enhances versatility, facilitating seamless integration into various audio system configurations.Experience the convenience and adaptability of the Apart Revamp 1120T with its rear clip LED indication on the input gain and multiple input and link connection options. Installers will appreciate the straightforward installation process and the assurance of high-end audio performance that this amplifier delivers. Whether setting up a small or mid-sized fixed install audio system, the Revamp 1120T is poised to elevate your audio experience significantly.Specifications:- Output Power: 1 x 120 watts at 100 volts or 4 ohms- Technology: Class-D amplifier with built-in galvanic separated toroidal output transformer- Cooling: Fanless, convection-cooled design- Form Factor: 1U compact chassis design without front controlsProduct Specifications General Dynamic output power 4 ohms: 120 watts Dynamic output power 8 ohms: 60 watts Output power RMS 100 volts: 120 watts Power consumption (max): 200 watts Height- rack units (1U=44 mm): 1 U Power supply: 115 - 230 VAC Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms Line input balanced: 1 Channel separation: > 65 dB @ 1 kHz Frequency response (in Hz): 50 - 20 k Applicable in 100V: Yes Net weight product (kg): 4.6 RMS output power 4 ohms: 120 watts RMS output power 8 ohms: 60 watts Minimum impedance load per channel: 4 ohms 19" (483 mm wide) rack mounting: Yes Power supply technology: Switching mode power supply Output channels: 1 Line input unbalanced: 1 Power amp topology: Class-D Cooling system: Convectional Applicable low impedance: Yes Physical & Dimensions Height: 44mm Depth (incl front): 239mm Depth (build in): 230mm

Read more less

Experience exceptional audio performance with the Apart PA2240BP 100V-Line Power Amplifier 2 x 240W. This bridgeable and ultra-reliable 2-channel amplifier is designed to deliver robust sound reinforcement for large-scale audio projects. With a dynamic output power of 2 x 240 watts RMS, this amplifier ensures a powerful and clear sound experience that is perfect for projects requiring high-quality audio amplification. Versatile and user-friendly, the PA2240BP can be easily configured to suit your specific needs, offering both a 2-channel setup or a single powerful output. Each channel comes equipped with independent bass and treble tone controls, allowing you to tailor the sound to your preferences, even in challenging acoustical environments. Safety is paramount with the PA2240BP, as it complies with the stringent EN60849 regulation, making it an ideal choice for use in evacuation systems. This amplifier operates on both 230V AC and 24V DC, offering flexibility and peace of mind for critical audio applications. Specifications:- Output Power: 2 x 240W- Bridged Mode: 1 x 480W- Frequency Response: 35 Hz to 22 kHz- Operation: 230V AC and 24V DC- Compliance: EN60849 regulationInvest in the Apart PA2240BP 100V-Line Power Amplifier for unparalleled performance, reliability, and versatility in your audio projects.Product Specifications General Dynamic output power 4 ohms: 2 x 240 watts RMS output power 4 ohms: 2 x 240 watts RMS output power 8 ohms: 2 x 120 watts Dynamic output power bridged 8 ohms: 480 watts Output power RMS 100 volts: 2 x 240 watts Output power RMS bridged 100 volts: 480 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 1050 watts Power supply: 230 VAC Emergency power supply: 24 VDC Output voltage tappings: 100 - 70 - 50 - 35 volts - 4 ohms Output channels: 2 Line input balanced: 2 Tone control: yes Priority input contact: 2 Emergency input: yes Priority output: 24 VDC Priority levels: 1 Frequency response (in Hz): 35 - 22 k Cooling system: fan Applicable in 100V: yes Applicable low impedance: yes Physical & Dimensions 19" (483 mm wide) rack mounting: yes Height: 2 U Depth (build in): 411mm Depth (incl front): 420mm Weight: 21.7kg

Read more less

Experience unparalleled sound quality and reliability with the Apart PA240P 100V-Line Power Amplifier 240W 100V 2U. This fully equipped amplifier is designed to meet all your professional industrial sound application needs, offering an impressive 240 watts of power. Stand out from the competition with the extra technical features, versatile possibilities, and advanced protection mechanisms this amplifier provides. Drive 4 ohms or constant voltage loudspeaker lines (50 – 70 – 100 volts) with ease, ensuring compatibility with a wide range of setups. Enjoy an exceptional sound experience, even in challenging acoustical environments, thanks to the bass-treble tone control. Activate the priority line input for paging or evacuation messages effortlessly with the contact closure feature. Ensure added security with the removable metal protection cover, allowing only authorised personnel to adjust volume, bass, and treble tone controls. Conveniently control the volume for the program input at the front or the volume for the priority input at the back. When the priority input is activated, 24V DC outputs become available to activate priority relays of loudspeaker attenuators or other devices. Upgrade your sound system with the Apart PA240P 100V-Line Power Amplifier and enjoy unmatched power, versatility, and reliability.Specifications:- Power: 240 watts- Voltage: 100V- Size: 2UProduct Specifications General Dynamic output power 4 ohms: 240 watts RMS output power 4 ohms: 240 watts RMS output power 8 ohms: 120 watts Output power RMS 100 volts: 240 watts Minimum impedance load per channel: 4 ohms Minimum impedance load bridged per channel: 8 ohms Power consumption (max): 525 watts Power supply: 230 VAC Emergency power supply: 24 VDC Output voltage tappings: 100 - 70 - 50 volts - 4 ohms Output channels: 1 Line input balanced: 1 Tone control: yes Priority input contact: 1 Emergency input: yes Priority output: 24 VDC Priority levels: 1 Frequency response (in Hz): 35 - 22 k Cooling system: fan Applicable in 100V: yes Applicable low impedance: yes Physical & Dimensions 19" (483 mm wide) rack mounting: yes Height- rack units (1U=44 mm): 2U Depth (build in): 343mm Depth (incl front): 364mm Weight: 14.05kg

Read more less

Unleash the full potential of your audio setup with the CHAMP 4 Convection Cooled Power Amplifier. This revolutionary powerhouse from the CHAMP-series offers maintenance-free operation and unparalleled performance. Indulge in crystal-clear sound quality and remarkable versatility as you immerse yourself in a world of audio excellence. Elevate your listening experience with the following features: - Maintenance-free convection cooled design - Whisper-quiet operation with no fan inside - Versatile with 4 individual amplifier channels that can be bridged into 2 stereo channels or a 2.1 sound system Upgrade your sound system and enjoy a silent, maintenance-free audio experience with the CHAMP 4 Convection Cooled Power Amp.

Read more less