Lab Gruppen E2:2 Energy Efficient Class-D Amplifier 2x100W 19" 1U

Description

Elevate your audio experience with the Lab Gruppen E2:2 Energy Efficient Class-D Amplifier. This cutting-edge amplifier is more than just a sound powerhouse; it is a game-changer in the realm of audio technology. Boasting Energy Star certification, the Lab Gruppen E2:2 sets the standard for green credentials, ensuring not only exceptional performance but also a sustainable choice for sound aficionados. Its versatile IntelliDrive technology allows for delivering 2 x 100W at a constant voltage of 70V or across low impedance ranges of 2, 4, and 8 Ohms, providing unparalleled flexibility in sound system configurations. The amplifier's fail-safe circuit protection guarantees reliable performance and durability, offering peace of mind while enjoying top-notch audio quality.

Key Specifications:
- Power Output: 2x100W
- Amp Class: Class-D
- Voltage Output: 70V
- Impedance Compatibility: 2, 4, and 8 Ohms
- Dimensions: 19" x 1U

Product Specifications

General

  • Number of amplifier channels: 2
  • Total output all channels driven: 200 W
  • Peak output voltage per channel: 100 V / 70 Vrms
  • Max. output current: 7.7 Arms

Max output power (all channels driven)

  • 2 ohms: N.R.
  • 4 ohms: 100 W
  • 8 ohms: 100 W
  • 16 ohms: 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
  • 70 V: 100 W
  • 100 V: Can deliver 100 W to a 100 V load tapped at 200 W

Performance

  • THD 20 Hz - 20 kHz at 1 W: <0.1%
  • THD at 1 kHz and 1 dB below clipping: <0.05%
  • Signal to Noise Ratio: >112 dBA
  • Channel separation (Crosstalk) at 1 kHz: >70 dB
  • Frequency Response: 2 Hz - 40 kHz
  • Input impedance: 20 kOhm
  • Common Mode Rejection (CMR): 50 dB
  • Output impedance: 25 mOhm

Gain, Sensitivity and Limiters

  • Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V
  • VPL for 70 V mode: 100 V
  • VPL for Lo-Z mode: 40 V
  • Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu
  • Sensitivity for 70.7 V out in 70 V mode: 4 dBu
  • Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu
  • Sensitivity for stated power into 16 Ohm in 70 V mode: -0.9 dBu
  • Gain in 70 V mode: 35.2 dB
  • Gain in Lo-Z mode: 27.2 dB
  • Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB

Connectors and Buttons

  • Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced
  • Output connectors (per ch.): 2 - pin detachable screw terminals
  • High pass filter: Fixed at 50 Hz, switchable per channel
  • Power control: Can be used to go between standby and ON
  • GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state
  • GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
  • Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed

Power

  • Nominal voltage: 100 – 240 VAC
  • Operating voltage: 70 – 265 VAC
  • Standby consumption: <1 W
  • Mains connector: IEC inlet

Dimensions

  • Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)

Weight

  • Weight: 4.2 kg (9.3 lbs)

Approvals

  • Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star
Product form

Elevate your audio experience with the Lab Gruppen E2:2 Energy Efficient Class-D Amplifier. This cutting-edge amplifier is more than just... Read more

SKU: 127540

In stock

£803.00

    • 2 years warranty and 30 days returns
    • Spread your payment using Klarna without fees
    Icon for truckDelivery: 2-3 working days

    Description

    Elevate your audio experience with the Lab Gruppen E2:2 Energy Efficient Class-D Amplifier. This cutting-edge amplifier is more than just a sound powerhouse; it is a game-changer in the realm of audio technology. Boasting Energy Star certification, the Lab Gruppen E2:2 sets the standard for green credentials, ensuring not only exceptional performance but also a sustainable choice for sound aficionados. Its versatile IntelliDrive technology allows for delivering 2 x 100W at a constant voltage of 70V or across low impedance ranges of 2, 4, and 8 Ohms, providing unparalleled flexibility in sound system configurations. The amplifier's fail-safe circuit protection guarantees reliable performance and durability, offering peace of mind while enjoying top-notch audio quality.

    Key Specifications:
    - Power Output: 2x100W
    - Amp Class: Class-D
    - Voltage Output: 70V
    - Impedance Compatibility: 2, 4, and 8 Ohms
    - Dimensions: 19" x 1U

    Product Specifications

    General

    • Number of amplifier channels: 2
    • Total output all channels driven: 200 W
    • Peak output voltage per channel: 100 V / 70 Vrms
    • Max. output current: 7.7 Arms

    Max output power (all channels driven)

    • 2 ohms: N.R.
    • 4 ohms: 100 W
    • 8 ohms: 100 W
    • 16 ohms: 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
    • 70 V: 100 W
    • 100 V: Can deliver 100 W to a 100 V load tapped at 200 W

    Performance

    • THD 20 Hz - 20 kHz at 1 W: <0.1%
    • THD at 1 kHz and 1 dB below clipping: <0.05%
    • Signal to Noise Ratio: >112 dBA
    • Channel separation (Crosstalk) at 1 kHz: >70 dB
    • Frequency Response: 2 Hz - 40 kHz
    • Input impedance: 20 kOhm
    • Common Mode Rejection (CMR): 50 dB
    • Output impedance: 25 mOhm

    Gain, Sensitivity and Limiters

    • Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V
    • VPL for 70 V mode: 100 V
    • VPL for Lo-Z mode: 40 V
    • Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu
    • Sensitivity for 70.7 V out in 70 V mode: 4 dBu
    • Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu
    • Sensitivity for stated power into 16 Ohm in 70 V mode: -0.9 dBu
    • Gain in 70 V mode: 35.2 dB
    • Gain in Lo-Z mode: 27.2 dB
    • Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB

    Connectors and Buttons

    • Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced
    • Output connectors (per ch.): 2 - pin detachable screw terminals
    • High pass filter: Fixed at 50 Hz, switchable per channel
    • Power control: Can be used to go between standby and ON
    • GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state
    • GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
    • Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed

    Power

    • Nominal voltage: 100 – 240 VAC
    • Operating voltage: 70 – 265 VAC
    • Standby consumption: <1 W
    • Mains connector: IEC inlet

    Dimensions

    • Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)

    Weight

    • Weight: 4.2 kg (9.3 lbs)

    Approvals

    • Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account