Description
Experience the pinnacle of professional audio connectivity with the Yamaha TIO1608-D2 16 In x 8 Out Dante Ready Rack Mount Stagebox 96KHz. 🎤
Enhance your audio setup with this Dante-compatible I/O rack, boasting 16 mic/line inputs and 8 line outputs for seamless integration into your existing setup. Perfect for use with TF Series or DM3 consoles, the TIO1608-D2 offers remote gain control, allowing you to effortlessly fine-tune your sound from a distance.
With support for 96kHz sampling frequency, this stagebox delivers high-definition audio quality, making it ideal for large installations such as the RIVAGE PM or DME7 systems. The versatility and scalability of Dante protocol ensure compatibility with a range of Yamaha mixers, allowing you to customise your audio system to suit your specific needs.
Thanks to the user-friendly configuration and flexibility of input selection, setting up your stagebox has never been easier. The TIO1608-D2's recallable D-PRE preamplifiers deliver crystal-clear sound every time, ensuring a professional audio experience for your audience.
Unlock the full potential of your audio system with the Yamaha TIO1608-D2 - the ultimate choice for musicians, sound engineers, and audio enthusiasts looking to elevate their sound to new heights.
Product Specifications
- Sampling frequency rate: External: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Signal delay: Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
- Total harmonic distortion: Less than 0.2% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz
- Frequency response: +0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT
- Dynamic range: 108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz
- Hum & noise level: Equivalent input noise -128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter
- Residual output noise: -86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter
- Crosstalk: -100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz
- Heat dissipation: 100-240V, 50/60Hz, 43.5kcal/h
- Power requirements : 100-240V, 50/60Hz
- Power consumption: 50W
- Dimensions: W: 480mm (18.9”) H : 88mm (3.5”) D: 364mm (14.4”)
- Net weight: 5.7kg (12.6lbs)
- Accessories: Owner’s Manual, Power Cord (2.5m), Rubber stoppers (4)
- Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃
Analog Output Characteristics
- Output Terminal: OUTPUT 1-8
- Actual Source Impedance: 75 Ohms
- For use With Nominal: 600 Ohms Lines
- Output Level: Nominal: +4 dBu (1.23V) Max. before clip: +24 dBu (12.3V)
- Connector: XLR-3-32 type *1
- Balanced/unbalanced: Balanced
Analog Input Characteristics
- Input Terminals: INPUT 1-16
- GAIN: +66 Db -6 Db
- Actual Load Impedance: 7.5kOhms
- For Use with Nominal: 50-600 Ohms Mics & 600 Ohms lines
- Input Level: Sensitivity: -82 dBu (61.6μV) +10 dBu (245Mv) Nominal: -62 dBu (0.616mV) +10 dBu (2.45V) Max before clip: -42 dBu (6.16mV) +30 dBu (24.5V)
- Connector: Combo Jack (XLR-3-31 type *2 or TRS phone *3)
- Balanced/Unbalanced: Balanced
Digital Input and Output Characteristics
- Terminal: Primary/Secondary
- Format: Dante
- Data Length: 24bit or 32bit
- Level: 1000Base-T
- Audio: 16ch (Tio1608-D2 to other devises) 8ch (Other devises to Tio1608-D2)
- Connector: etherCON Cat5e
Delivery: 2-3 working days
