Yamaha

3 products


  • Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 800W at 8ohms 2x 1050W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX8 Class D Power Amp 2x1050W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 800W x 2 at 8Ω / 1050W x 2 at 4Ω.Product Features 2x 800W at 8Ω 2x 1050W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protectionThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protectionThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 7.2kg

    In stock

    £1,240.00

  • Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 500W at 8ohms 2x 800W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX5 Class D Power Amp 2x800W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 500W x 2 at 8Ω / 800W x 2 at 4Ω.Product Features 2x 500W at 8Ω 2x 800W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output portsNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2 OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power consumption 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

    In stock

    £1,088.00

  • Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 300W at 8ohms 2x 500W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX3 Class D Power Amp 2x500W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.Product Features 2x 300W at 8Ω 2x 500W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total Harmonic Distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency Response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) Maximum Input Voltage: +24dBu Input Impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

    In stock

    £938.00

  • Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX8 Class D Power Amp 2x1050W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 800W at 8ohms 2x 1050W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX8 Class D Power Amp 2x1050W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 800W x 2 at 8Ω / 1050W x 2 at 4Ω.Product Features 2x 800W at 8Ω 2x 1050W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protectionThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protectionThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 7.2kg

    In stock

    £1,240.00

  • Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX5 Class D Power Amp 2x800W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 500W at 8ohms 2x 800W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX5 Class D Power Amp 2x800W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 500W x 2 at 8Ω / 800W x 2 at 4Ω.Product Features 2x 500W at 8Ω 2x 800W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output portsNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2 OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power consumption 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

    In stock

    £1,088.00

  • Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U

    Yamaha Yamaha PX3 Class D Power Amp 2x500W @ 4Ω with On-Board DSP 2U

    In stock

    Main Features 2x 300W at 8ohms 2x 500W at 4ohms Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation PX3 Class D Power Amp 2x500W @ 4ohm with On-Board DSP 2U The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.Product Features 2x 300W at 8Ω 2x 500W at 4Ω Newly developed Class-D amplifier engine with a custom LSI Flexible onboard PEQ, crossover, filters, delay, and limiter functions Yamaha Speaker presets Utlities for safe and secure operation Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total Harmonic Distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency Response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) Maximum Input Voltage: +24dBu Input Impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

    In stock

    £938.00

Login

Forgot your password?

Don't have an account yet?
Create account