Wireless Microphone Systems

Enhance your audio setup with the Audio Technica ATW-2110B (U) UniPak Bodypack System Excluding Mic CH38. This professional-grade system features automatic frequency scanning for finding an open channel quickly, up to 10 user selectable channels, and True Diversity operation for reducing dropouts. The rugged metal half-rack receiver with soft-touch controls and LCD display provides RF and AF metering, making it a reliable choice for various applications. The ATW-2110B (U) UniPak Bodypack System with advanced wireless features is now more affordable than ever before. Enjoy easy setup, automatic scanning, and increased RF power for improved link stability.Key Features:- Automatic frequency scanning for open channel selection- Up to 10 user selectable channels- True Diversity operation reduces dropouts- Rugged metal half-rack receiver with soft-touch controls- LCD display featuring RF and AF metering- Tone Lock™ squelch function fights interference- Compatibility varies by country- Support for charging contacts on the transmitters- 12VDC bias voltage for compatibility with active components such as antenna boosters- Ground-lift switch helps eliminate audible humProduct Specifications Overall System Operating Frequencies: UHF band 656.125 – 678.500 MHz (D Band) 854.900 – 864.900 MHz (F Band) 487.125 – 506.500 MHz (I Band) 606.500 – 631.000 MHz (U Band) Number Of Channels: 10 total Frequency Stability: ±0.005%, Phase Lock Loop frequency control Modulation Mode: FM Frequency Response: 100 Hz to 15,000 Hz Operating Range: 100 m (300') typical Operating Temperature Range: 41° F (5° C) to 113° F (45° C) Receiver Receiving System: True Diversity Image Rejection: 55 dB nominal, 50 dB minimum Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz Sensitivity: 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted) Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation) Audio Output Attenuator (ATTN): Unbalanced: 25mV (100k ohms load), 1/4" phone jack Balanced: 50mV (Attenuator; 0dB) 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type Antenna Input: BNC-type 50 Ohms – Bias voltage 12V DC, 60mA each Dimensions: 210 mm x 44 mm x 162.2 mm (W x H x D) Weight: 1.0kg Accessories Included: Two flexible UHF antennas, rack mount adapters, AC adapters Belt Pack RF Power Output: High: 30mW; Low: 10mW, nominal Spurious Emissions: According to National Regulations Battery Type: 1.5V AA alkaline or rechargeable AA NiMH (not included) Current Consumption: 150 mA typical Battery Life: Approximately 9 hours (low), 7 hours (high) Dimensions: 66 mm x 92.3 mm x 22.5 mm (W x H x D) Net Weight: 80g

Read more less

Experience unparalleled sound quality and performance with the Electro-Voice RE3-BPCL-8M CH70+Duplex Gap Cardioid Mic Lavalier Bodypack System. This wireless UHF bodypack system features the CL3 Cardioid Lavalier Microphone, ideal for voice presentations and performances. The robust CL3 microphone boasts a cardioid polar pattern that rejects ambient noise, ensuring clear and intelligible vocals for your audience. Set up is a breeze with the RE3 clear frequency scan and sync functions, while the bodypack transmitter and diversity receiver ensure a stable and reliable connection. Enhance your voice performances and presentations with the Electro-Voice RE3-BPCL-8M CH70+Duplex Gap Cardioid Mic Lavalier Bodypack System. Invest in professional-grade sound equipment for your speaking engagements, conferences, and events.Key Features:- CL3 Cardioid Lavalier Microphone included- RE3-BPT Bodypack Transmitter- RE3-RX Diversity Receiver- Cardioid polar pattern for clear voice reproduction- Quick and simple setup with clear frequency scan and sync functions- Wide dynamic range and frequency response for accurate sound- Robust metal body construction for durability- Clothing clip for secure and easy attachment to garments- Up to 36 MHz tuning bandwidth for reliable operationProduct Specifications CL3 Cardioid Lavalier Microphone Element type: Self-biased condenser Frequency response: 100 Hz - 15 kHz Polar pattern: Cardioid Sensitivity: open circuit voltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA) Maximum SPL: 115 dB SPL Impedance: 3700 ohms Power requirements: 3-9 VDC Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1 Electrical contact pinouts: Pin #1 - Ground, shield Pin #2 - Audio Pin #3 - Bias voltage Pin #4 - N/C Dimensions (cable length) : 56.3" (1430 mm) Dimensions (head length) : 1.04" (26.4 mm) Dimensions (head diameter) : 0.4" (10.1 mm) Net weight: 0.758 oz (21.5 g) Shipping weight: 6.35 oz (180 g) Microphone connector: 4-pin mini plug Head finish: Non-reflecting black Material: Die cast aluminium, steel wire cloth grille, black flexible PVC cable RE3-BPT Bodypack Transmitter Frequency oscillation mode: Phase-locked loop (PLL) Available band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) *8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic RF power output: Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW 5H (560-596MHz): Low 10mW / High 50mW 6M (653-663MHz): Low 10mW / High 20mW 8M (823-865MHz) 10mW T (803-806MHz): Low 10mW / High 50mW Display by: LCD + LED Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock. RF stability: <±10kHz@Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Input jack: 4-pin mini jack Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Finish: Black polyurethane paint Dimensions (without antenna): Height: 3.2 in. (81.5mm) Width: 2.54 in. (64.5mm) Depth: 0.98 in. (25mm) Net weight: 6.14 oz. (0.174 kg) Gross weight: 8.29 oz. (0.235 kg) RE3-RX Diversity Receiver Frequency oscillation mode: Phase-locked loop (PLL) Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) * 8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion (Thd): <0.6%@1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT) Antenna type: Detachable ½ wave with BNC connector Antenna booster power: DC12 - 15V/100mA Function display by: LCD Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator. Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset. Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch) Audio frequency output level: Ref：±22.5kHz Dev@1kHz Tone ¼” (6.3mm) Phone Jack：-10dBV XLR Jack：-4dBV(Line)、-24dBV(MIC) Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack Power supply: DC12~15V/500mA Finish: Black polyurethane paint Dimensions: Width: 8.27 in. (210mm) Height: (with feet attached) 1.85 in. (47mm) Height: (without feet attached) 1.73 in. (44mm) Depth: (including antenna jack) 6.89 in. (175mm) Depth: (not including antenna jack) 6.1 in. (155mm) Net weight: 2.71 lb (1.23 kg) Gross weight: 3.28 lb (1.49 kg)

Read more less

Enhance your presentations with the Electro-Voice R300-L/E CH70 Lapel Microphone System featuring the ULM18 E-Band 850MHz - 865MHz. This robust UHF wireless bodypack system is perfect for applications requiring the convenience of a wireless lavalier microphone. The BP-300 rugged metal bodypack transmitter, powered by two AA batteries, is user-friendly and reliable. Included is the high-quality ULM18 directional cardioid condenser lavalier microphone, ideal for sound reinforcement or voice recording. Enjoy the freedom of hands-free presentations or performances with this system. The ULM18's cardioid polar pattern reduces feedback potential, making it exceptionally useful for sound reinforcement. The receiver boasts dual antenna diversity to avoid signal dropouts, while the durable metal frame can be used on a tabletop or rack-mounted with optional hardware.Product Features:- ClearScan automatically finds the clearest channel- EZsync for one-step channel setup- ULM18 directional lavalier microphone- 14-hour battery life from two AA alkaline batteries- Rugged metal transmitter- Metal receiver chassis with optional rack mountProduct Specifications:- Receiver Type: Synthesized PLL- Frequency Range (RF): E Band 850 – 865 MHz- Number of Channels: 32- Modulation: ± 40 kHz- Diversity: True Antenna- RF Sensitivity: <1.0 μV for 12 dB SINAD- Image Rejection: > 55 dB- Squelch: Tone Code plus Amplitude- Power Requirements: 12–16 VDC, 500mA max- Operating Temperature: 5°C to 45°C (41°F to 113°F)- Dimensions: 43 mm H x 206 mm W x 210 mm D (1.72 in H x 7.8 in W x 8.0 in D)- Audio Parameters: Frequency Response 80 Hz – 18 kHz ± 2 dB- Balanced Output: 20 dBV (max @ 40 kHz deviation)- Unbalanced Output: AdjustableProduct Specifications Receiver Type: Synthesized PLL Frequency Range (RF): E Band 850 – 865 MHz Number of Channels: 32 Modulation: ± 40 kHz Diversity: True Antenna RF Sensitivity: <1.0 μV for 12 dB SINAD Image Rejection: > 55 dB Squelch: Tone Code plus Amplitude Power Requirements: 12–16 VDC, 500mA max Operating Temperature: 5°C to 45°C (41°F to 113°F) Dimensions: 43 mm H x 206 mm W x 210 mm D (1.72 in H x 7.8 in W x 8.0 in D) Audio Parameters Frequency Response: 80 Hz – 18 kHz ± 2 dB Balanced Output: 20 dBV (max @ 40 kHz deviation) Unbalanced Output: Adjustable 8 mV to 0.755V RMS Distortion: < 1.0%, 0.4% typical (ref 1 kHz, 40 kHz deviation) Signal-to-Noise Ratio: > 100 dB A-Weighted Dynamic Range: > 95 dB BP-300 Transmitter Specifications: Radiated Output: 8 mW typical Back Lit LCD Display: Channel, Frequency, Mute, and Battery Level Standard Lavalier Microphone: Electro-Voice ULM18 Uni-Directional Condenser TA4F Connector Wiring: Pin 1: Ground Pin 2: Mic Input Pin 3: +5V bias Pin 4: +5V thru 2.2k Ω Power Requirement: Two AA batteries Battery Life (Typical): > 14 hours with AA alkaline typical Bodypack Antenna: Flexible external 1/4 wave Dimensions (Bodypack): 84 mm H x 66 mm W x 23 mm D (3.3 in H x 2.6 in W x 0.89 in D)

Read more less

The Gemini GMU-HSL100 Lapel Wireless Microphone System is a professional-grade audio solution that combines convenience and versatility. This complete UHF Wireless System features both a dynamic headset microphone and a lavalier microphone, allowing you to choose the ideal option for your needs. With a wireless transmitter bodypack and single-channel receiver, this system offers multi-selectable frequencies for optimal performance. The setup is hassle-free thanks to the automatic transmitter setup feature via the SET button. The advance compression circuit ensures clear and crisp sound by rejecting unwanted noise.Whether you are into Karaoke, live performances, conferences, or podcasting, the GMU-HSL100 is a reliable choice. The system provides a wireless range of over 50 meters with a stable signal and no delays, perfect for various settings. The R10 Receiver comes with a rechargeable Lithium battery that offers hours of use on a single charge. You can conveniently monitor the remaining battery life and channel/frequency on the bodypack's easy-to-read LED display. The bodypack is powered by AA batteries, which are included with the system.Key Features:- Cardioid Pattern Dynamic Wireless Microphones- UHF High Band Single Channel Receiver with multi-selectable frequencies (Europe: 863-865MHz)- Ultra-fast Microcomputer Controlled PLL Oscillation Circuit- Hassle-free Automatic Transmitter setup via SET Button- Includes HS10 Headset Microphone and LAV10 Lavalier Microphone- Bodypack powered by AA Batteries includedProduct Specifications Polar Pattern: Cardioid Dynamic Microphones Wireless Range: > 50 Meters Distortion: < 0.6% Dynamic Range: ≥ 106 dB Frequency Range: R3 (Europe): 863-865MHz Frequency Response: 20Hz-18KHz, +1dB/-3dB Construction Material: ABS Plastic Transmitter Battery: 2 X AA Batteries (Included) Receiver Battery: 500mAh Rechargeable Lithium Charging: USB-C Receiver Charge Time: ~2 hours Receiver Play Time: ~5 hours Transmitter Charge Time: N/A Transmitter Play Time: ~4 hours

Read more less

Experience reliability and clarity with the Sennheiser XSW1-ME2 E Lapel System featuring the ME2-2 Omni Lapel Mic. This compact bodypack transmitter comes with an unobtrusive clip-on microphone, perfect for presenters and moderators seeking seamless wireless transmission. Enjoy the benefits of antenna-switching diversity reception and integrated antennas, ensuring stable and interference-free performance. With automatic frequency management and synchronization, setting up is effortless, and the system offers up to 10 compatible channels within a stable UHF band.The XS Wireless 1 Lavalier Mic Set is designed for an engaging and powerful presentation. The intuitive stationary receiver allows for quick setup, while the lightweight bodypack transmitter ensures hassle-free handling. The rugged ABS housing provides durability, and the cardioid pick-up pattern enhances sound quality for an immersive audience experience.Product Features:- Compact bodypack transmitter with an unobtrusive clip-on microphone- Antenna-switching diversity reception with integrated antennas- Automatic frequency management and synchronization for easy setup- Selectable UHF frequencies within a large bandwidth- Up to 10 compatible channelsProduct Specifications:- Microphone Type: Condenser- Total Harmonic Distortion (THD): ≤ 0.9%- Pick-up Pattern: Cardioid- Signal-to-noise Ratio: ≥ 103 dBA- RF Output Power: 10 mW- Switching Bandwidth: Up to 24 MHz- Operating Time: Approximately 10 hours- Modulation: Wideband FM- Output Voltage: +6 dBu (unbalanced), +12 dBu (balanced)- Housing: Rugged ABS housing- Sensitivity: < 3 μV at 52 dB(A)rms S/N- Frequency Ranges: Multiple options availableEnhance your presentations with the professional-grade Sennheiser XSW1-ME2 E Lapel System. Enjoy superior sound quality and seamless wireless performance for an impactful delivery.Product Specifications General Microphone: condenser THD, total harmonic distortion: ≤ 0.9% Pick-up pattern: cardioid Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Operating time: approx. 10 hrs Modulation: wideband FM Output voltage: '1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Housing: rugged ABS housing Diversity reception: antenna switching diversity via internal antennas Frequency: 8 frequency banks, each with up to 10 factory-preset channels Frequency range: A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N SPL for peak deviation: 130 dB Squelch: adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Input sensitivity: 1.5 mV / Pa Audio adjustment range: 45 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range: operation: 0°C to +40°C, storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions approx.: 200 x 42 x 127 mm Weight approx.: 340g Power supply: 12 V DC nom. / 300 mA AF frequency response: 50 to 16,000 Hz (–3 dB) Transmitter Dimensions approx. : 71 x 96 x 28 mm Weight approx. : 95g Power supply: 2 AA size batteries, 1.5 V Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps

Read more less

Make a lasting impression with the Sennheiser XSW1-ME2 GB Lapel System featuring the ME2-2 Omni Lapel Mic CH38. Enhance your presentations and speech deliveries with this all-in-one wireless system that ensures crystal-clear sound transmission. The compact bodypack transmitter and discreet clip-on microphone offer convenience and flexibility, perfect for presenters and moderators seeking professional audio quality. With antenna-switching diversity reception and integrated antennas, this system guarantees a stable connection. Enjoy the ease of setup with automatic frequency management and synchronization via remote channel. Choose from selectable UHF frequencies within a wide bandwidth to find the best signal for your needs. Up to 10 compatible channels allow for versatile use in various settings. Inspire your audience and captivate them with a powerful and inspiring presentation using the XS Wireless 1 XSW1-ME2-GB Lavalier System.Specifications:- Microphone: Condenser- Pick-up pattern: Cardioid- Signal-to-noise ratio: ≥ 103 dBA- RF output power: 10 mW- Switching bandwidth: up to 24 MHz- Operating time: approx. 10 hrs- Modulation: Wideband FM- Output voltage: +6 dBu for '1/4“ (6.3 mm) jack socket (unbalanced), +12 dBu for XLR socket (balanced)- Housing: Rugged ABS housing- Diversity reception: Antenna switching diversity via internal antennas- Frequency range: GB: 606-630 MHz- Sensitivity: < 3 μV at 52 dB(A)rms S/N- SPL for peak deviation: 130 dB- Squelch: Adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)- Synchronization: 2.4 GHz, Low Power OQPSKProduct Specifications General Microphone: condenser THD, total harmonic distortion: ≤ 0.9% Pick-up pattern: cardioid Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Operating time: approx. 10 hrs Modulation: wideband FM Output voltage: '1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Housing: rugged ABS housing Diversity reception: antenna switching diversity via internal antennas Frequency: 8 frequency banks, each with up to 10 factory-preset channels Frequency range: A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N SPL for peak deviation: 130 dB Squelch: adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Input sensitivity: 1.5 mV / Pa Audio adjustment range: 45 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range: operation: 0°C to +40°C, storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions approx.: 200 x 42 x 127 mm Weight approx.: 340g Power supply: 12 V DC nom. / 300 mA AF frequency response: 50 to 16,000 Hz (–3 dB) Transmitter Dimensions approx. : 71 x 96 x 28 mm Weight approx. : 95g Power supply: 2 AA size batteries, 1.5 V Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps

Read more less

Ensure your presentations are crystal clear and engaging with the Sennheiser XSW2-ME2 E Lapel System with ME2-2 Omni Lapel Mic CH70. This wireless lavalier system offers up to 12 compatible channels, allowing for seamless operation. The unobtrusive clip-on microphone ensures hands-free convenience, perfect for presenters and moderators looking to make a powerful impact. The true diversity receiver with a durable metal housing provides reliability in even the toughest stage conditions. With automatic frequency management and a wide range of UHF frequencies, this system is designed to adapt to your needs effortlessly. The set includes a stationary receiver for easy setup, a lightweight bodypack transmitter, and a discreet clip-on microphone, making it an all-in-one solution for professional presentations.Specifications:- Frequency response: 50 to 16,000 Hz- Pick-up pattern: Omni-directional- Signal-to-noise ratio: ≥ 103 dBA- RF output power: 10 mW- Switching bandwidth: up to 24 MHz- Modulation: Wideband FM- Output voltage: +6 dBu (unbalanced), +12 dBu (balanced)- Sensitivity: < 3 μV at 52 dB(A)rms S/N- Squelch: switchable from 3Product Specifications General Microphone: Condenser Frequency response: 50 to 16,000 Hz (–3 dB) THD, total harmonic distortion: ≤ 0.9% Pick-up pattern: Omni-directional Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Modulation: Wideband FM Output voltage: '1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Diversity reception: True Diversity Frequency: 8 frequency banks, each with up to 12 factory-preset channels Frequency range A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N Squelch: switchable from 3 dBμV to 28 dBμV (via Pilot Tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 40 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range Operation: 0°C to +40°C Storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions: approx. 200 x 42 x 127 mm Weight: approx. 680g Power supply: 12 V DC nom. / 300 mA Housing: Metal AF frequency response: 50 to 16,000 Hz Transmitter Dimensions: approx. 71 x 96 x 28 mm Weight: approx. 95g Operating time: approx. 10 hrs

Read more less

Ensure a flawless presentation with the Sennheiser XSW2-ME2 GB Lapel System with ME2-2 Omni Lapel Mic CH38. This wireless lavalier microphone system combines high flexibility with exceptional sound quality, tailored for presenters and moderators who seek to captivate their audience effortlessly. The system features an unobtrusive clip-on microphone for hands-free operation, paired with a lightweight bodypack transmitter and a stable true diversity receiver housed in metal. With up to 12 compatible channels in a UHF band, and an intuitive LCD display allowing for manual options, the XSW2-ME2 system adapts seamlessly to varied performance conditions. The XS Wireless 2 Lavalier Mic Set includes a rackmount kit for easy installation, automatic frequency management for effortless setup, and external antennas for optimal signal reception. Inspire your audience with a powerful and inspiring presentation using this reliable and user-friendly wireless system from Sennheiser.Product Features:- Unobtrusive clip-on microphone for hands-free operation- Compact bodypack transmitter included- True diversity receiver with metal housing for durability- External antennas for improved signal quality- Automatic frequency management and synchronization for hassle-free setup- Intuitive LCD display for easy manual adjustments- Rackmount kit included for convenient installation- Up to 12 compatible channels for flexibilityProduct Specifications:- Microphone Type: Condenser- Frequency Response: 50 to 16,000 Hz (–3 dB)- Pick-up Pattern: Omni-directional- Signal-to-Noise Ratio: ≥ 103 dBA- RF Output Power: 10 mW- Switching Bandwidth: up to 24 MHz- Modulation: Wideband FM- Frequency Range: 8 frequency banks, each with up to 12 factory-preset channels- Sensitivity: < 3 μV at 52 dB(A)rms- S/N Squelch: switchable from 3Product Specifications General Microphone: Condenser Frequency response: 50 to 16,000 Hz (–3 dB) THD, total harmonic distortion: ≤ 0.9% Pick-up pattern: Omni-directional Signal-to-noise ratio: ≥ 103 dBA RF output power: 10 mW Switching bandwidth: up to 24 MHz Modulation: Wideband FM Output voltage: '1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu Diversity reception: True Diversity Frequency: 8 frequency banks, each with up to 12 factory-preset channels Frequency range A: 548-572 MHz GB: 606-630 MHz B: 614-638 MHz C: 766-790 MHz D: 794-806 MHz E: 821-832 MHz, 863-865 MHz K: 925-937.5 MHz Sensitivity: < 3 μV at 52 dB(A)rms S/N Squelch: switchable from 3 dBμV to 28 dBμV (via Pilot Tone) Synchronization: 2.4 GHz, Low Power OQPSK (only active during synchronization) Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps Audio adjustment range: 40 dB, adjustable in 5-dB steps Line / Mic level: 20 dB, switchable Temperature Range Operation: 0°C to +40°C Storage: –20°C to +70°C Receiver Principle: double superheterodyne Receivers Dimensions: approx. 200 x 42 x 127 mm Weight: approx. 680g Power supply: 12 V DC nom. / 300 mA Housing: Metal AF frequency response: 50 to 16,000 Hz Transmitter Dimensions: approx. 71 x 96 x 28 mm Weight: approx. 95g Operating time: approx. 10 hrs

Read more less

Experience unparalleled sound clarity and seamless connectivity with the Sennheiser EW-D ME2 Wireless Lapel Microphone System. Perfect for singers, speakers, or instrumentalists, this digital wireless system eliminates noise, interference, and static bursts to deliver professional-grade audio quality. With an impressive UHF transmission enhancing range, reliability, and scalability, you can enjoy optimal performance on stage or in various settings. The mobile app makes setup and operation a breeze, eliminating complicated menus and ensuring quick connections with minimal effort. Equipped with up to 2,240 selectable frequencies and a lithium-ion battery pack providing up to 12 hours of operation, the system is designed for long-lasting use. The robust bodypack transmitter and discreet clip-on ME2 microphone ensure high speech intelligibility, making it ideal for daily performances. Don't compromise on sound quality - choose the Sennheiser EW-D ME2 Wireless Lapel Microphone System for your audio needs. Key Features:- Digital wireless technology eliminates noise and interference- UHF transmission enhances range, reliability, and scalability- Mobile app for streamlined setup and operation- Up to 2,240 selectable frequencies- Lithium-ion battery pack offering up to 12 hours of operation- Robust bodypack transmitter with discreet clip-on ME2 microphoneProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 2 (Lavalier Microphone) Transducer principle: pre-polarized condenser microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 17 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 32 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Upgrade your audio setup with the high-performance Sennheiser EW-D ME2 Wireless ME2 Lapel Mic System (U1/5) CH70. This top-of-the-line digital wireless system delivers crystal-clear sound quality by eliminating noise, interference, and static bursts. The UHF transmission technology enhances range, reliability, and scalability, making it an ideal choice for performers, speakers, and musicians. With the user-friendly mobile app, setting up and operating the system is a breeze, eliminating the need for complicated menus.The system offers up to 2,240 selectable frequencies, ensuring a stable and interference-free connection. Whether you're on stage or in a studio, the Lithium Ion battery pack provides up to 12 hours of operation, ensuring you can focus on your performance without worrying about battery life. The robust bodypack transmitter and discreet clip-on microphone ME 2 (omni-directional) with high speech intelligibility are perfect for daily use on stage.Preserve every detail of your dynamic performances with the impressive 134 dB transmitter dynamic range. With a wide frequency response of 20 Hz - 20 kHz, this wireless lapel mic system captures the nuances of your voice or instrument accurately. The system's 56 MHz bandwidth allows for up to 90 channels, giving you the flexibility to adapt to various environments seamlessly.Product Features:- Digital wireless technology eliminates noise and interference- UHF transmission enhances range, reliability, and scalability- Mobile App for easy setup and operation- Up to 2,240 selectable frequencies- Lithium Ion battery for up to 12 hours of operation- 56 MHz bandwidth for up to 90 channelsProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 2 (Lavalier Microphone) Transducer principle: pre-polarized condenser microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 17 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 32 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Upgrade your audio experience with the Sennheiser EW-D ME2 Wireless Lapel Mic System (Y1-3) 1.8GHz. This versatile and feature-rich digital wireless system is designed for musicians, speakers, and performers who demand the best. Say goodbye to noise, interference, and static bursts with digital wireless technology, while the UHF transmission greatly enhances range, reliability, and scalability.Seamlessly pair and manage your audio with the EW-D Smart Assist App, eliminating complicated menus and setups. The robust bodypack transmitter, housed in metal, complements the unobtrusive clip-on ME 2 microphone, ensuring high speech intelligibility for dynamic performances.With up to 2,240 selectable frequencies and a Lithium-Ion battery pack providing up to 12 hours of operation (or up to 8 hours with AA batteries), this system is a reliable companion for all your stage needs. The 56 MHz Bandwidth allows for up to 90 channels, preserving every detail of even the most dynamic performances with the 134 dB transmitter dynamic range.Product Features:- Digital wireless technology eliminates noise, interference, and static bursts- UHF transmission enhances range, reliability, and scalability- Mobile App for streamlined setup and operation- Up to 2,240 selectable frequencies- Lithium-Ion battery pack with up to 12 hours of operation- Metal bodypack transmitter with unobtrusive clip-on ME 2 microphone - 56 MHz Bandwidth for up to 90 channels- 134 dB transmitter dynamic rangeProduct Specifications System Audio link frequency ranges: Y1-3 1785.2 - 1799.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 2 (Lavalier Microphone) Transducer principle: pre-polarized condenser microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 17 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 32 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled audio quality with the Sennheiser EW-D ME4 Wireless Lapel Microphone System. This cutting-edge digital wireless system is designed to eliminate noise, interference, and static bursts, providing a seamless audio transmission experience. The UHF transmission technology enhances range, reliability, and scalability, making it the ideal choice for performers, speakers, and musicians. The user-friendly mobile app streamlines setup and operation, eliminating complicated menus and ensuring a hassle-free experience.The system features up to 2,240 selectable frequencies, ensuring flexibility and interference-free performance. The lithium-ion battery pack offers up to 12 hours of operation, while the robust metal housing of the bodypack transmitter ensures durability for daily use on stage. The included ME 4 clip-on microphone with a cardioid pickup pattern delivers high speech intelligibility, capturing every detail of your performance.Preserve every detail of your dynamic performances with the 134 dB transmitter dynamic range and enjoy up to 90 channels with the 56 MHz bandwidth. The Sennheiser EW-D ME4 Wireless Lapel Microphone System is the ultimate tool for professionals seeking top-quality audio transmission and seamless management capabilities.Product Features:- Digital wireless technology eliminates noise, interference, and static bursts- UHF transmission enhances range, reliability, and scalability- Mobile app for streamlined setup and operation- Up to 2,240 selectable frequencies- Lithium-ion battery pack for up to 12 hours of operation- Robust metal housing for durability on stage- ME 4 clip-on microphone with cardioid pattern for high speech intelligibilityProduct Specifications:- Audio Link Frequency Ranges: S1-7: 606.2 - 662 MHz, U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz- Bluetooth® Low Energy (BLE) Frequency Range: 2402 - 2480 MHz- Audio Frequency Response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs- Operating Temperature: -10°C - +55°C (14°F - 131°F)- Relative Humidity: 5 - 95% (non-condensing)Product Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 3 (Headset Microphone) Transducer principle: pre-polarized condensor microphone Pick-up pattern: cardioid Sensitivity (free field, no load) (1 kHz): 40 mV/Pa Max. SPL at 1 kHz: 120 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 31 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled audio quality with the Sennheiser EW-D ME4 Wireless Lapel Microphone System. Perfect for singers, speakers, and musicians, this feature-rich digital wireless system ensures a seamless performance every time. The system eliminates noise, interference, and static bursts, providing you with crystal-clear sound. Thanks to the UHF transmission, you can enjoy extended range, reliability, and scalability for your audio setup. The mobile app streamlines the setup process, making operation effortless and eliminating complicated menus. This system offers up to 2,240 selectable frequencies, ensuring optimal performance in various environments.Ideal for daily use on stage, the robust bodypack transmitter paired with the unobtrusive ME 4 clip-on microphone delivers high speech intelligibility. With a metal housing, this lapel mic system is designed to withstand the rigours of regular use. Its lithium-ion battery pack provides up to 12 hours of operation, or up to 8 hours with AA batteries, giving you uninterrupted performance on stage or during events. The 56 MHz bandwidth allows for up to 90 channels, offering versatility for different setups.Preserve every detail of your dynamic performances with the 134 dB transmitter dynamic range, ensuring that your audience hears every nuance. Enhance your audio setup with the Sennheiser EW-D ME4 Wireless Lapel Microphone System and take your performances to the next level.Product Features:- Digital wireless technology eliminates noise and interference- UHF transmission offers extended range and reliability- Mobile app for streamlined setup and operation- Up to 2,240 selectable frequencies- Lithium-ion battery pack for up to 12 hours of operation- 56 MHz bandwidth for up to 90 channels- 134 dB transmitter dynamic rangeProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 3 (Headset Microphone) Transducer principle: pre-polarized condensor microphone Pick-up pattern: cardioid Sensitivity (free field, no load) (1 kHz): 40 mV/Pa Max. SPL at 1 kHz: 120 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 31 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled audio quality with the Sennheiser EW-D ME4 Wireless Lapel Microphone System. This cutting-edge digital wireless system provides a seamless wireless performance for singers, speakers, or instrumentalists. Say goodbye to noise, interference, and static bursts, thanks to its digital wireless technology, while the UHF transmission ensures excellent range, reliability, and scalability.The EW-D Smart Assist App simplifies setup and operation, eliminating the need for complex menus. Enjoy up to 2,240 selectable frequencies, giving you the flexibility to find the perfect channel for your performance. The system's lithium-ion battery pack offers up to 12 hours of operation, or up to 8 hours with AA batteries, ensuring uninterrupted performances.Featuring a robust bodypack transmitter with a discreet ME 4 clip-on cardioid microphone that delivers high speech intelligibility, this system is ideal for daily stage use. With a metal housing, it's built to withstand the rigours of live performances. The 56 MHz bandwidth allows for up to 90 channels, while the 134 dB transmitter dynamic range captures every detail of dynamic performances flawlessly.Product Features:- Digital wireless technology eliminates noise and interference- UHF transmission enhances range, reliability, and scalability- EW-D Smart Assist App for easy setup and management- Up to 2,240 selectable frequencies for flexible channel selection- Robust bodypack transmitter and discreet clip-on cardioid microphone- Lithium-ion battery pack provides 12 hours of operation- 56 MHz bandwidth allowing for up to 90 channels- 134 dB transmitter dynamic range for detailed performance captureProduct Specifications System Audio link frequency ranges: Y1-3 1785.2 - 1799.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g ME 3 (Headset Microphone) Transducer principle: pre-polarized condensor microphone Pick-up pattern: cardioid Sensitivity (free field, no load) (1 kHz): 40 mV/Pa Max. SPL at 1 kHz: 120 dB Frequency response: 50 to 18,000 Hz Equivalent noise level A-weighted (DIN IEC 651): 31 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage 7.5 V Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled performance with the Sennheiser Evolution Wireless Digital SK Bodypack System. This cutting-edge wireless system is designed to provide crystal-clear sound quality by eliminating noise, interference, and static bursts. Perfect for singers, speakers, or musicians, this system offers versatile functionality and seamless product pairing through the intuitive EW-D Smart Assist App.Featuring robust metal housing, the bodypack transmitter is built to withstand the rigours of daily use on stage. With up to 2,240 selectable frequencies, you can enjoy enhanced range, reliability, and scalability with the UHF transmission technology. The Lithium Ion battery pack ensures up to 12 hours of operation, while the 56 MHz bandwidth allows for up to 90 channels to suit your specific needs.Preserve every detail of your dynamic performances with the impressive 134 dB transmitter dynamic range of this Sennheiser system. The automated setup feature makes creating reliable connections a breeze, saving you time and effort during your setup. From eliminating complicated menus to streamlining operation via the Mobile App, this wireless bodypack system is a game-changer in the world of professional audio equipment.Specifications:- Audio link frequency ranges: S1-7: 606.2 - 662 MHz, U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz- Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz- Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs- Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level- Operating temperature: -10 °C - +55 °C (14 °F - 131 °F)- Relative humidity: 5 - 95 % (non-condensing)- Input voltage: 11 - 13 V ⎓- Input current: ≤ 300 mA- Transmit power (radiated): BLE: max. 10 mW EIRP- Audio output power: 18 dBu max.- Dimensions: 212 x 44 x 189 mm- Weight approx.: 1000 g (withProduct Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience the pinnacle of audio performance with the Sennheiser EW-D SK Base Set Wireless Bodypack System. This revolutionary system incorporates cutting-edge digital wireless technology to eliminate noise, interference, and static bursts, ensuring crystal-clear sound transmission. The UHF transmission greatly enhances range, reliability, and scalability, making it an ideal choice for professional singers, speakers, and musicians. Seamlessly manage and pair your devices through the intuitive EW-D Smart Assist App, simplifying setup and operation. The robust bodypack transmitter's metal housing is designed for daily use on stage, providing durability and reliability. Key Features:- Digital wireless technology eliminates noise and interference- UHF transmission enhances range and reliability- Intuitive mobile App for easy setup and operation- Automated setup for quick and reliable connections- Up to 2,240 selectable frequencies- Lithium-ion battery pack offers up to 12 hours of operationDiscover the perfect balance of innovation, reliability, and performance with the Sennheiser EW-D SK Base Set Wireless Bodypack System.Product Specifications System Audio link frequency ranges S1-7: 606.2 - 662 MHz U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level Operating temperature: -10 °C - +55 °C (14 °F - 131 °F) Relative humidity: 5 - 95 % (non-condensing) EW-D EM (Rack Receiver) Input voltage: 11 - 13 V ⎓ Input current: ≤ 300 mA Transmit power (radiated): BLE: max. 10 mW EIRP Audio output power: 18 dBu max. Dimensions: 212 x 44 x 189 mm Weight approx.: 1000 g (without antennas and power supply) EW-D SK (Bodypack Transmitter) Input voltage: 2.0 - 4.35 V Input current: < 300 mA Power supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth: 200 kHz Transmit power (radiated): Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP) BLE: max. 10 mW EIRP Dimensions: 63 x 80 x 20 mm (without antenna) Weight (without batteries): approx. 120 g Set in packaging Dimensions: 405 x 350 x 73 mm Weight: 2.8 kg

Read more less

Experience unparalleled professionalism with the Sennheiser EW100 G4 ME2-E Wireless Lapel Microphone System. This all-in-one solution is designed for professional live sound, featuring a robust bodypack transmitter and unobtrusive ME2-II Omni Lapel Mic for clear speech intelligibility. The True Diversity half-rack receiver ensures stable and reliable wireless performance, while the intuitive LCD display allows for full control. With fast and flexible wireless synchronization and up to 20 compatible channels, this system is ideal for moderators, presenters, singers, and instrumentalists. Key specifications include:- Frequency range: E: 823 - 865 MHz- Up to 42 MHz bandwidth with 1680 selectable frequencies- Transmission range: up to 100 meters / 300 feet- High RF output power (up to 30 mW) depending on country regulationsProduct Specifications THIS ITEM (NO. 507506) OPERATES ON CH70 (E: 823 - 865 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME 2 - General Transducer principle: pre-polarized condensor microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 20 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: "50 to 18,000 Hz (ME 2-II) 30 to 20,000 Hz (ME 2-US)" "Equivalent noise level A-weighted (DIN IEC 651)": 36 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V

Read more less

Experience professional-grade live sound with the Sennheiser EW100 G4 ME2-GB Lapel System with ME2 Omni Lapel Mic CH38. This robust wireless system is meticulously engineered for presenters, moderators, and performers who require crystal-clear audio quality and hands-free operation on stage. The package includes a reliable bodypack transmitter and unobtrusive clip-on microphone ME 2-II, ensuring high speech intelligibility for daily use. The true diversity half-rack receiver housed in a sturdy full-metal casing features an intuitive LCD display for seamless control. Enjoy easy wireless synchronization and fast frequency allocation for up to 20 compatible channels with a generous bandwidth of up to 42 MHz. With a transmission range of up to 100 meters and high RF output power of up to 30 mW, this system offers top-notch performance for professional settings.Key Specifications:- Modulation: Wideband FM- Frequency Ranges: GB: 606 - 648 MHz- Receiving Frequencies: Max. 1680 receiving frequencies, adjustable in a stable UHF rangeProduct Specifications THIS ITEM (NO.507502) OPERATES ON CH38 (GB: 606 - 648 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME 2 - General Transducer principle: pre-polarized condensor microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 20 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: "50 to 18,000 Hz (ME 2-II) 30 to 20,000 Hz (ME 2-US)" "Equivalent noise level A-weighted (DIN IEC 651)": 36 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V

Read more less

Experience unparalleled audio quality and reliable performance with the Sennheiser EW100 G4 ME4-E Lapel System with ME4 Cardioid Mic CH70. This cutting-edge wireless microphone system is meticulously engineered for professional live sound applications, making it the top choice for presenters, moderators, and performers. The system includes a robust bodypack transmitter and an unobtrusive clip-on ME4 cardioid microphone, ensuring crystal-clear sound reproduction and high speech intelligibility on any stage.Key Features:- True diversity half-rack receiver in a durable full-metal housing- Easy and flexible wireless synchronization between transmitter and receiver via infrared- Up to 20 compatible channels for seamless multi-system setups- Transmission range of up to 100 meters / 300 feet- High RF output power (up to 30mW) for exceptional signal strengthProduct Specifications:- Modulation: Wideband FM- Frequency Range: 823 - 865 MHz- Receiving Frequencies: Max. 1680 receiving frequencies, adjustable in 25 kHz steps- Bandwidth: Up to 42 MHz with 1680 selectable frequencies- Tunable in a stable UHF rangeEnhance your audio setup with the Sennheiser EW100 G4 ME4-E Lapel System and enjoy top-notch performance and versatility for all your live sound needs.Product Specifications THIS ITEM (NO. 507515) OPERATES ON CH70 (E: 823 - 865 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME 4 - General Transducer principle pre-polarized condensor microphone Pick-up pattern cardioid Sensitivity (free field, no load) (1 kHz) 40 mV/Pa Max. SPL at 1 kHz 120 dB Frequency response 50 to 18,000 Hz "Equivalent noise level A-weighted (DIN IEC 651)" 31 dB Connector 3.5 mm jack Cable length approx. 1.60 m Supply voltage 7.5 V

Read more less

Enhance your live sound experience with the Sennheiser EW100 G4 ME4-GB Lapel System featuring the ME4 Cardioid Mic CH38. This professional wireless system is expertly engineered for presenters and moderators, offering a rugged bodypack transmitter and an unobtrusive clip-on microphone ME 4 with high speech intelligibility. The true diversity half-rack receiver, housed in a durable metal casing, provides intuitive control with an LCD display. Enjoy seamless wireless synchronization between the transmitter and receiver, ensuring a hassle-free setup for your stage performances. With up to 20 compatible channels and a transmission range of up to 100 meters, this system is designed to deliver outstanding audio quality. The Sennheiser EW100 G4 ME4-GB Lapel System is the perfect choice for those who demand reliability and performance in their professional audio setup.Specifications:- Modulation: Wideband FM- Frequency Range: GB: 606 - 648 MHz- Receiving Frequencies: Max. 1680 frequencies, adjustable in 25 kHz steps- Frequency Bands: 20 frequency banks, each with up to 12 frequencies- Bandwidth: Up to 42 MHz- RF Output Power: Up to 30 mW (country regulations dependent)Product Specifications THIS ITEM (NO.507511) OPERATES ON CH38 (GB: 606 - 648 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME 4 - General Transducer principle pre-polarized condensor microphone Pick-up pattern cardioid Sensitivity (free field, no load) (1 kHz) 40 mV/Pa Max. SPL at 1 kHz 120 dB Frequency response 50 to 18,000 Hz "Equivalent noise level A-weighted (DIN IEC 651)" 31 dB Connector 3.5 mm jack Cable length approx. 1.60 m Supply voltage 7.5 V

Read more less

Enhance your professional live sound setup with the Sennheiser EW100 G4 ME4-1G8 Lapel System featuring the ME4 cardioid microphone. This system is meticulously engineered for presenters and moderators, providing high speech intelligibility and seamless hands-free operation on any stage. The robust bodypack transmitter and unobtrusive clip-on ME4 microphone ensure reliability and convenience, while the true diversity half-rack receiver offers intuitive control with its clear LCD display. Easy wireless synchronization between transmitter and receiver, along with a fast frequency allocation for up to 12 linked systems, make this system a versatile choice for those who sing, speak, or play instruments. With up to 20 compatible channels and a transmission range of up to 100 meters, the Sennheiser EW100 G4 ME4-1G8 Lapel System delivers outstanding performance for professional live sound applications.Key specifications include:- Frequency ranges: A1: 470 - 516 MHz, A: 516 - 558 MHz, AS: 520 - 558 MHz, G: 566 - 608 MHz, GB: 606 - 648 MHz, B: 626 - 668 MHz, C: 734 - 776 MHz, D: 780 - 822 MHz, E: 823 - 865 MHz, JB: 806 - 810 MHz, K+: 925 - 937.5 MHz, 1G8: 1785 - 1800 MHz- Modulation: Wideband FM- Up to 42 MHz bandwidth with 1680 selectable frequencies- Transmission range: up to 100 meters (300 feet)- High RF output power (up to 30 mW)- Receiving frequencies: Max. 1680, adjustable in 25 kHz stepsProduct Specifications THIS ITEM (NO.507516) OPERATES ON 1G8 (1G8: 1785 - 1800 MHz) EM 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 65 dB Intermodulation attenuation: Typically ≥ 65 dB Blocking: ≥ 70 dB Squelch low: 5 dBμV middle: 15 dBμV high: 25 dBμV Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs) Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF) 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range -10 °C to +55 °C Power supply 12 V DC Current consumption 300 mA EM 100 G4 - Physical & Dimensions Height: 43mmm Width: 212mm Depth: 190mm Weight: 980g SK 100 G4 - General Modulation: Wideband FM Frequency ranges A1: 470 - 516 MHz A: 516 - 558 MHz AS: 520 - 558 MHz G: 566 - 608 MHz GB: 606 - 648 MHz B: 626 - 668 MHz C: 734 - 776 MHz D: 780 - 822 MHz E: 823 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz 1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels Switching bandwidth: up to 42 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω: Max. 30 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 110 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time Typically: 8 h SK 100 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME 4 - General Transducer principle pre-polarized condensor microphone Pick-up pattern cardioid Sensitivity (free field, no load) (1 kHz) 40 mV/Pa Max. SPL at 1 kHz 120 dB Frequency response 50 to 18,000 Hz "Equivalent noise level A-weighted (DIN IEC 651)" 31 dB Connector 3.5 mm jack Cable length approx. 1.60 m Supply voltage 7.5 V

Read more less

Enhance your business or educational presentations with the top-of-the-line Sennheiser EW300 G4-GBW Lapel System. This system is designed for seamless operation and reliability, ensuring crystal-clear sound transmission during speeches, lectures, or conferences. The integrated network port allows for easy control and monitoring, while the wide 88 MHz bandwidth offers up to 32 channels for multi-channel setups. With increased RF output power and compatibility with the wireless speaker system LSP 500 PRO, this lapel mic system is the perfect choice for professional settings.Product Features:- Integrated network port for control and monitoring- Wide 88 MHz bandwidth for multi-channel setups- Increased RF output power (10/30/50 mW)- Transmission Range: up to 100 meters / 330 feet- Compatible with wireless speaker system LSP 500 PROProduct Specifications:- Frequency Range: GBw: 606 - 678 MHz- Modulation: Wideband FM- Receiving frequencies: Max. 2880 receiving frequencies- Switching Bandwidth: up to 72 MHzProduct Specifications THIS ITEM (NO.507672) OPERATES ON CH38 (GBw: 606 - 678 MHz) EM 300-500 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 626 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Receiving frequencies Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching: bandwidth up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 75 dB Intermodulation attenuation: Typically ≥ 70 dB Blocking: ≥ 75 dB Squelch: 5 to 25 dBμV in steps of 2 dB Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs): Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF): 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range: -10 °C to +55 °C Power supply: 12 V DC Current consumption: 350 mA EM 300-500 G4 - Physical & Dimensions Height: 43mm Width: 212mm Depth: 202mm Weight: 980g SK 300 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 526 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Transmission frequencies Max. 2880 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching bandwidth: up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω switchable: Low: typ. 10 mW Standard: typ. 30 mW High: typ. 50 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time: Typically 8 h SK 300 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g ME2 Transducer principle: pre-polarized condensor microphone Pick-up pattern: omni-directional Sensitivity (free field, no load) (1 kHz): 20 mV/Pa Max. SPL at 1 kHz: 130 dB Frequency response: "50 to 18,000 Hz (ME 2-II) 30 to 20,000 Hz (ME 2-US)" "Equivalent noise level A-weighted (DIN IEC 651)": 36 dB Connector: 3.5 mm jack Cable length: approx. 1.60 m Supply voltage: 7.5 V

Read more less

Experience the pinnacle of professional audio performance with the Sennheiser EW500 G4-GBW Lapel System. Renowned by sound engineers worldwide, this system is the top choice for handling multi-channel settings on stages of all sizes. This lapel system features a true diversity half-rack receiver with intuitive OLED display for complete control, ensuring a seamless wireless performance. The package includes the MKE2 Gold omni-directional condenser microphone, designed to deliver exceptional sound quality and speech intelligibility in any live environment, whether indoors or outdoors. With up to 32 compatible channels and an impressive 88 MHz bandwidth offering 3520 selectable frequencies, this lapel system is a powerhouse of flexibility and reliability on any stage. The Ethernet connection for Wireless Systems Manager (WSM) control software provides advanced frequency coordination in multi-channel setups, while the high RF output power (adjustable in three steps depending on country regulations) ensures a strong and stable signal transmission. Elevate your presentations to new heights with the Sennheiser EW500 G4-GBW Lapel System.Product Specifications:- Modulation: Wideband FM- Frequency ranges: GBw: 606 - 678 MHz- Max. 2880 receiving frequencies adjustable in 25 kHz steps- 20 frequency banks, each with up to 32 factory-preset channels- High RF output power (up to 50 mW)- Ethernet connection for Wireless Systems Manager- MKE2 Gold omni-directional condenser microphone- True diversity half-rack receiverProduct Specifications THIS ITEM (NO.507736) OPERATES ON CH38 (GBw: 606 - 678 MHz) EM 300-500 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 626 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Receiving frequencies Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching: bandwidth up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 75 dB Intermodulation attenuation: Typically ≥ 70 dB Blocking: ≥ 75 dB Squelch: 5 to 25 dBμV in steps of 2 dB Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs): Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF): 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range: -10 °C to +55 °C Power supply: 12 V DC Current consumption: 350 mA EM 300-500 G4 - Physical & Dimensions Height: 43mm Width: 212mm Depth: 202mm Weight: 980g SK 500 G4 - General Modulation: Wideband FM Frequency ranges Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 526 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Transmission frequencies Max. 2880 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching bandwidth: up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω switchable: Low: typ. 10 mW Standard: typ. 30 mW High: typ. 50 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time: Typically 8 h SK 500 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g MKE 2 Frequency response (Microphone): 20 - 20000 Hz +- 3 dB Transducer principle (Microphone): pre-polarised condenser microphone Connection cable: 3.5mm Jack Pick-up pattern: omni-directional Sensitivity in free field, no load (1kHz): 5 mV/Pa +- 3 dB Nominal impedance: 1000 Ω Min. terminating impedance: 4700 Ω Equivalent noise level: 26 dB Equivalent noise level weighted as per CCIR 468-3: 39 dB Maximum sound pressure level (passiv): 142 dB Current consumption: ca. 250 µA Operating voltage (stand alone): 7,5 V

Read more less

Introducing the Sennheiser SpeechLine SL LAVALIER SET DW-3 Omni Lapel microphone system. Elevate your presentations to new heights with the exceptional speech clarity offered by the MKE 1 condenser lavalier microphone. This set includes the Bodypack Transmitter and Stationary Receiver, ensuring a seamless experience for your public speaking engagements. With a rechargeable battery boasting up to 15 hours of operating time, you can confidently deliver your message without interruption. The GA4 rack mount kit simplifies installation, providing convenience at every step. Impress your audience with a full, natural sound and minimal ambient noise, thanks to the advanced technology of the Sennheiser SpeechLine series.Key Specifications:- Frequency Range: 1.9GHz- Microphone Type: Condenser Lavalier- Operating Time: Up to 15 hours- Rack Mount Option: GA4 IncludedSystem Specifications General AF frequency response: 20 to 20,000 Hz Dynamic range: > 120 dB (A) THD (1 kHz): typ. 0.1 % Audio sampling: 24 bit/48 kHz Signal-to-noise ratio: > 90 dB (A) Encryption: AES 256 Modulation: GFSK with back channel Transmission method: TDMA | Space diversity Latency: 19 ms Temperature range - relative air humidity max. 95 % Operation: –10 °C to +55 °C Storage: –20 °C to +70 °C Temperature range is influenced by battery characteristics. RF frequency ranges: EU: 1,880 to 1,900 MHz USA: 1,920 to 1,930 MHz Brazil: 1,910 to 1,920 MHz Taiwan: 1,880 to 1,895 MHz Japan: 1,893 to 1,906 MHz MKE1 Lapel Mic Specifications General Type: Pre-polarized condenser microphone Sensitivity: 5 mV/Pa Pick-up Pattern: omni-directional Max. SPL: 142 dB SPL SpeechLine Body Pack Specifications General RF output power: adaptive, up to 250 mW (country-specific) Line input impedance: 1 MΩ Input sensitivity: automatic sensitivity adjustment AF connection socket: 3.5 mm jack socket, lockable Weight (w/o accupack): approx. 88 g AF frequency response Mic: 50 to 20,000 Hz Line: 20 to 20,000 Hz Max. input level Mic: 2.2 V RMS Line: 3.3 V RMS Power supply Accupack: BA 30 (Li-Ion, 3.7 V) Batteries (optional occessory): 2 x AA size battery (1.5 V) Operating time Accupack: typ. 15 h Batteries (optional accessory): typ. 11 h SpeechLine Rack Receiver Specifications General RF sensitivity: < –90 dBm RF output power back channel: adaptive, up to 250 mW (country-specific) Display: OLED Network protocol: Media Control Protocol | TCP/IP IPv4 (DHCP, Manual)/IPv6 Power supply: 12 V DC Current consumption: 350 mA AF connection sockets: XLR/2 x RCA Antenna sockets: 2 x Rev-SMA Network socket: RJ45 DC socket for power supply: hollow jack Weight: approx. 828 g Digital gain: adjustable in 6-dB steps Mic/line level switch: –24 dB/0 dB XLR, balanced: max. +18 dBu RCA, unbalanced: max. +6 dBu Audio effects Low cut: –3 dB at 120 Hz Equalizer: 7-band graphic equalizer with sound presets Automatic gain control AGC: Compression/expansion with automatic make-up gain function

Read more less

Experience professional-grade audio quality with the Trantec S4.04L UHF Lapel Radio Mic System CH70. This system features a beltpack transmitter and lapel microphone, designed for seamless broadcasting on the free channel 70 frequency. With 4 switchable license-free frequencies and advanced PLL quartz tuning technology, this system ensures clear and reliable sound transmission. The beltpack battery lasts approximately 10 hours, providing extended use for various applications. Channel number setting can be done manually or through Infrared synchronization, offering flexibility and convenience. The diversity reception, antenna diversity sensitivity, and noise squelch feature guarantee optimal audio performance. The compact and lightweight design of the beltpack transmitter makes it easy to wear and use. Enhance your audio setup with the Trantec S4.04L UHF Lapel Radio Mic System CH70.Product Specifications:- Diversity Reception: Antenna Diversity Sensitivity- Audio Frequency Response: 50Hz – 15kHz- Battery Life: Approximately 10 hours- Power Supply: 12 VDC 500mA- Dimensions: 215(W) x 39(H) x 102(D)mm- Weight: 480gProduct Specifications Receiver Diversity Reception: Antenna Diversity Sensitivity: 10uV at 45dBA, S/N Squelch: Tone SQ, Carrier SQ, Noise SQ Audio Frequency Response: 50Hz – 15kHz Audio Output Level (Max.) Balanced (XLR socket): -20dBu Unbalanced(1/4″ jack socket): 10dBu Power Supply: 12 VDC 500mA Dimensions: 215(W) x 39(H) x 102(D)mm Weight: 480g Beltpack Transmitter RF Carrier Power: 10mW Audio Frequency Response: 50Hz – 15kHz Audio Input Level: -6dBV (maximum), mic gain 0dB Battery Life: Approximately 10 hours Power Supply: 1 AA size battery, 1.5V Finish: Resin, coating Dimensions: 62(W) x 100(H) x 25(D)mm Weight: 85g with battery

Read more less

Enhance your audio production with the Trantec S4.10L UHF Lapel Radio Microphone System. Featuring 16 selectable frequencies and up to 10 simultaneous channels, this system utilises fully synthesised PLL quartz tuning technology for reliable performance. The receiver's LED indicators display AF peak level, RF level, and diversity channel A or B, offering clear monitoring. With diversity operation and a detachable antenna, this system ensures stable and high-quality audio transmission. Encased in a professional metal body, the S4.10-L-EB GD4 Lapel Microphone System in Channel 70 includes a Beltpack transmitter and lapel microphone. Ideal for professional settings, this system also offers a 19” rack mount option for one or two receivers.Product Features:- 16 selectable frequencies available- Fully synthesised PLL quartz tuning technology- Receiver LED's show AF peak level, RF level & diversity channel A or B- Diversity operation with detachable antenna- Professional metal enclosureProduct Specifications:Receiver- Diversity Reception: Antenna Diversity- Sensitivity: 10uV at 45dBA, S/N Squelch: Tone SQ, Carrier SQ, Noise SQ- Audio Frequency Response: 50Hz - 1.5kHz- Audio Output Level Balanced (XLR socket): -20dBu- Unbalanced (1/4" jack socket): 10dBu- Power Supply: 12 V DC 500mA- Dimensions: 215(W) x 39(H) x 102(D)mm (excluding antenna and BNC)- Weight: 480gBeltpack Transmitter- RF Carrier Power: 10mW- Audio Frequency Response: 50Hz - 1.5kHz- Audio Input Level: -6dBV max., mic gain 0dB- Battery Life: Approx. 10 hours- Power Supply: 1 AA size alkaline battery 1.5V- Finish: Resin coating- Dimensions: 62(W) x 100(H) x 25(D)mm- Weight: 85g with batteryProduct Specifications Receiver Diversity Reception: Antenna Diversity Sensitivity: 10uV at 45dBA, S/N Squelch: Tone SQ, Carrier SQ, Noise SQ Audio Frequency Response: 50Hz - 1.5kHz Audio Output Level Balanced (XLR socket): -20dBu Unbalanced (1/4" jack socket): 10dBu Power Supply: 12 V DC 500mA Dimensions: 215(W) x 39(H) x 102(D)mm (excluding antenna and BNC) Weight: 480g Beltpack Transmitter RF Carrier Power: 10mW Audio Frequency Response: 50Hz - 1.5kHz Audio Input Level: -6dBV max., mic gain 0dB Battery Life: Approx. 10 hours Power Supply: 1 AA size alkaline battery 1.5V Finish: Resin, coating Dimensions: 62(W) x 100(H) x 25(D)mm Weight: 85g with battery

Read more less

Enhance your audio performance with the Trantec S4.10L UHF Lapel Radio Mic System in Channel 38. This advanced system offers 16 selectable frequencies, allowing for up to 10 simultaneous channels. Experience crystal-clear sound quality with fully synthesised PLL quartz tuning technology, while the receiver LED's provide visual cues for AF peak level, RF level, and diversity channel A or B. The diversity operation, along with a detachable antenna, ensures reliable signal reception. Encased in a durable metal enclosure, this system also offers a 19” rack mount option for one or two receivers. The S4.10-L-EB GG3 Lapel Microphone System includes a Beltpack transmitter and a lapel microphone for added convenience.Key Features:- 16 selectable frequencies available- Up to 10 simultaneous channels- Receiver LED’s show AF peak level, RF level & diversity channel A or B- Diversity operation with detachable antenna- Professional metal enclosure- 19” rack mount option for one or two receiversProduct Specifications:Receiver- Diversity Reception: Antenna Diversity- Sensitivity: 10uV at 45dBA, S/N- Squelch: Tone SQ, Carrier SQ, Noise SQ- Audio Frequency Response: 50Hz - 1.5kHz- Audio Output Level: Balanced (XLR socket) -20dBu, Unbalanced (1/4" jack socket) 10dBu- Power Supply: 12 V DC 500mA- Dimensions: 215(W) x 39(H) x 102(D)mm (excluding antenna and BNC)- Weight: 480gBeltpack Transmitter- RF Carrier Power: 10mW- Audio Frequency Response: 50Hz - 1.5kHz- Audio Input Level: -6dBV max., mic gain 0dB- Battery Life: Approx. 10 hours- Power Supply: 1 AA size alkaline battery 1.5V- Finish: Resin, coating- Dimensions: 62(W) x 100(H) x 25(D)mm- Weight: 85g with batteryInvest in the Trantec S4.10L UHF Lapel Radio Mic System for unparalleled audio clarity and performance.Product Specifications Receiver Diversity Reception: Antenna Diversity Sensitivity: 10uV at 45dBA, S/N Squelch: Tone SQ, Carrier SQ, Noise SQ Audio Frequency Response: 50Hz - 1.5kHz Audio Output Level Balanced (XLR socket): -20dBu Unbalanced (1/4" jack socket): 10dBu Power Supply: 12 V DC 500mA Dimensions: 215(W) x 39(H) x 102(D)mm (excluding antenna and BNC) Weight: 480g Beltpack Transmitter RF Carrier Power: 10mW Audio Frequency Response: 50Hz - 1.5kHz Audio Input Level: -6dBV max., mic gain 0dB Battery Life: Approx. 10 hours Power Supply: 1 AA size alkaline battery 1.5V Finish: Resin, coating Dimensions: 62(W) x 100(H) x 25(D)mm Weight: 85g with battery

Read more less

The Trantec TS55 Omni-Directional Lavalier Microphone with a 4-Pin Lemo Connector is a top-of-the-line choice for professionals seeking exceptional audio quality. Perfect for a wide range of applications including communications, public address, and music recording, this microphone features a flat, extended frequency response that is ideal for capturing both voice and musical instruments with precision. Designed with convenience in mind, the TS55 comes with a 1.5 metre long black shielded cable, ensuring flexibility in use.Crafted in a rugged miniature package, the TS55 boasts a very low noise transmission from both handling and clothing movement, making it perfect for on-the-go professionals. The wideband omnidirectional polar pattern ensures crystal-clear audio capture in any environment. With internal RFI suppression included, you can trust that your recordings will be interference-free.Product Features:- Flat extended frequency response- Suitable for voice or instrument- 1.5 metre long black shielded cable- Very rugged miniature package- Low noise transmission from clothing- Wideband omnidirectional polar patternProduct Specifications:- Type: Omni-directional electret condenser- Nominal Impedance: 4700 ohms- Max SPL: >120dB- Operating Voltage: 2-20 volts min/max- Current Consumption: 50uA- Frequency response: 30Hz -16 kHz, ±3dB- Colour: Black- Cable Length: 1500mmProduct Specifications General Type: Omni-directional electret condenser Nominal Impedance: 4700 ohms Max SPL: >120dB Operating Voltage: 2-20 volts min/max Current Consumption: 50uA Frequency response: 30Hz -16 kHz, ±3dB Colour: Black Physical & Dimensions Cable Length: 1500mm

Read more less

Enter the world of professional audio quality with the Trantec TS212B Mini Lavalier Hi-Q Mic in Black. This high-quality lavalier microphone, designed with the professional in mind, is perfect for a wide range of live applications. Whether you need it for instrument pick-up or to deliver exceptionally clear speech or vocals, this mic does it all with finesse. Its sub-miniature construction, combined with a durable microphone clip, makes it the ideal partner for all your live sound needs.The discreet black finish of the TS212B Lavalier Mic adds a touch of sophistication to its functionality. With an extremely low physical profile, this microphone excels in places where larger mics fail, maintaining exceptional sound quality while withstanding the challenges of moisture and makeup. Its membrane construction, similar to its sister product, the TS212-R, ensures top-notch performance, whether worn in the hair, on the face, or as a body-worn lavalier.Specifications:- Polar Pattern: Omni-directional- Transducer Type: Electret condenser- Nominal Impedance: 4400ohms- Max SPL: >132dB- Operating Voltage: 2-10 volts min/max- Current Consumption: 14-25mA min/max- Frequency Response: 40Hz –18 kHz, +/-3dB- Colour: Black- Termination: 4-pin Lemo- Cable Length: 1200mmProduct Specifications General Polar Pattern: Omni directional Transducer Type: Electret condenser Nominal Impedence: 4400ohms Max SPL: >132dB Operating Voltage: 2-10 volts min/max Current Consumption: 14-25mA min/max Frequency response: 40Hz –18 kHz, +/-3dB Colour: Black Termination: 4 pin lemo Physical & Dimensions Cable Length: 1200mm

Read more less

Enhance your audio quality with the Trantec TS212PR Mini Lavalier HiQ Mic+12dB Pad in a sophisticated Beige colour. Perfect for instrument pickup or delivering clear speeches, this sub-miniature microphone is designed for professional use. Its extremely low profile allows you to use it discreetly in various settings, whether for instrument recording, vocal performances, or public speaking engagements.The TS-212 high-quality lavalier microphone stands out due to its durable construction and versatile clip, making it a reliable companion for live performances. It boasts the ability to endure moisture and makeup penetration, thanks to its resilient membrane construction similar to the HM-22 model. Whether pinned in the hair, discreetly placed on the face, or worn as a body lavalier, this microphone excels in withstanding the demands of regular production use.Specifications:- Type: Omni-directional electret condenser- Nominal Impedance: 4400 ohms- Max SPL: >120dB (high SPL version available)- Operating Voltage: 2-10 volts min/max- Current Consumption: 12-25uA min/max- Frequency Response: 40Hz -18 kHz, ±3dB- Cable Length: 1200mmProduct Specifications General Type: Omni-directional electret condenser Nominal Impedance: 4400 ohms Max SPL: >120dB (high SPL version available) Operating Voltage: 2-10 volts min/max Current Consumption: 12-25uA min/max Frequency response: 40Hz -18 kHz, ±3dB Colour: Beige Physical & Dimensions Cable Length: 1200mm

Read more less

Experience unparalleled performance with the Sennheiser EW300 G4-GBW Bodypack Base System, designed for professional use in a variety of environments. This top-of-the-class system offers maximum flexibility for your business or educational needs. The G4 300 Series ensures reliable operation with an increased switching bandwidth of up to 88 MHz, allowing for multi-channel setups with ease. The base set includes a stationary receiver and bodypack transmitter, ready to pair with your favourite clip-on or headset microphone. The system is equipped with an integrated network port for convenient control, monitoring, and setup via Sennheiser Control Cockpit and WSM Software. With up to 32 channels and a transmission range of up to 100 meters, this system is perfect for various applications. Get your hands on the Sennheiser EW300 G4-GBW Bodypack Base System today and elevate your audio experience.Specifications:- Modulation: Wideband FM- Frequency Ranges: GBw: 606 - 678 MHz- Receiving Frequencies: Max. 2880 receiving frequencies, adjustable in 25 kHz steps- Frequency Banks: 20 factory-preset channels, 6 programmable channels- Switching Bandwidth: Up to 72 MHz- Nominal/Peak Deviation: ±24 kHz / ±48 kHz- Transmission Range: Up to 100 meters / 330 feetProduct Specifications THIS ITEM (NO.507696) OPERATES ON CH38 (GBw: 606 - 678 MHz) EM 300-500 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 626 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Receiving frequencies Max. 2880 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching: bandwidth up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Receiver principle: True diversity Sensitivity (with HDX, peak deviation): < 2.5 μV for 52 dBA eff S/N Adjacent channel selection: Typically ≥ 75 dB Intermodulation attenuation: Typically ≥ 70 dB Blocking: ≥ 75 dB Squelch: 5 to 25 dBμV in steps of 2 dB Pilot tone squelch: Can be switched off Antenna inputs: 2 BNC sockets Compander system: Sennheiser HDX EQ presets (switchable, act on line and monitor outputs): Preset 1: Flat Preset 2: Low Cut (-3 dB at 180 Hz) Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz) Preset 4: High Boost (+6 dB at 10 kHz) Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % AF output voltage (at peak deviation, 1 kHz AF): 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Setting range “AF Out”: 48 dB (3 dB steps) Temperature range: -10 °C to +55 °C Power supply: 12 V DC Current consumption: 350 mA EM 300-500 G4 - Physical & Dimensions Height: 43mm Width: 212mm Depth: 202mm Weight: 980g SK 300 G4 - General Modulation: Wideband FM Frequency ranges: Aw+: 470 - 558 MHz AS: 520 - 558 MHz Gw1: 558 - 608 MHz Gw: 558 - 626 MHz GBw: 606 - 678 MHz Bw: 526 - 698 MHz Cw: 718 - 790 MHz Dw: 790 - 865 MHz JB: 806 - 810 MHz K+: 925 - 937.5 MHz Transmission frequencies Max. 2880 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 32 factory-preset channels, no intermodulation 6 frequency banks with up to 32 programmable channels Switching bandwidth: up to 72 MHz Nominal/peak deviation: ±24 kHz / ±48 kHz Frequency stability: ≤ ±15 ppm RF output power at 50 Ω switchable: Low: typ. 10 mW Standard: typ. 30 mW High: typ. 50 mW Pilot tone squelch: Can be switched off Compander system: Sennheiser HDX AF frequency response Mic: 80 – 18,000 Hz Line: 25 – 18,000 Hz Signal-to-noise ratio (1 mV, peak deviation): ≥ 115 dBA Total harmonic distortion (THD): ≤ 0.9 % Max. microphone/line input voltage: 3 Veff Microphone/line input impedance: 40 kΩ, unbalanced / 1 MΩ Input capacitance: Switchable Setting range for input sensitivity: 60 dB, adjustable in 3 dB steps Temperature range: -10 °C to +55 °C Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack Nominal voltage: 3 V battery / 2.4 V rechargeable battery Current consumption: at nominal voltage: typ. 180 mA with transmitter switched off: ≤ 25 μA Operating time: Typically 8 h SK 300 G4 - Physical & Dimensions Height: 82mm Width: 64mm Depth: 24mm Weight: 160g

Read more less