Description
Enhance your audio setup with the Audio Technica ATW-2110B (U) UniPak Bodypack System Excluding Mic CH38. This professional-grade system features automatic frequency scanning for finding an open channel quickly, up to 10 user selectable channels, and True Diversity operation for reducing dropouts. The rugged metal half-rack receiver with soft-touch controls and LCD display provides RF and AF metering, making it a reliable choice for various applications. The ATW-2110B (U) UniPak Bodypack System with advanced wireless features is now more affordable than ever before. Enjoy easy setup, automatic scanning, and increased RF power for improved link stability.
Key Features:
- Automatic frequency scanning for open channel selection
- Up to 10 user selectable channels
- True Diversity operation reduces dropouts
- Rugged metal half-rack receiver with soft-touch controls
- LCD display featuring RF and AF metering
- Tone Lock™ squelch function fights interference
- Compatibility varies by country
- Support for charging contacts on the transmitters
- 12VDC bias voltage for compatibility with active components such as antenna boosters
- Ground-lift switch helps eliminate audible hum
Product Specifications
Overall System
- Operating Frequencies: UHF band
- 656.125 – 678.500 MHz (D Band)
- 854.900 – 864.900 MHz (F Band)
- 487.125 – 506.500 MHz (I Band)
- 606.500 – 631.000 MHz (U Band)
- Number Of Channels: 10 total
- Frequency Stability: ±0.005%, Phase Lock Loop frequency control
- Modulation Mode: FM
- Frequency Response: 100 Hz to 15,000 Hz
- Operating Range: 100 m (300') typical
- Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
Receiver
- Receiving System: True Diversity
- Image Rejection: 55 dB nominal, 50 dB minimum
- Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
- Sensitivity: 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
- Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
- Audio Output Attenuator (ATTN):
- Unbalanced: 25mV (100k ohms load), 1/4" phone jack
- Balanced: 50mV (Attenuator; 0dB)
- 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type
- Antenna Input: BNC-type 50 Ohms – Bias voltage 12V DC, 60mA each
- Dimensions: 210 mm x 44 mm x 162.2 mm (W x H x D)
- Weight: 1.0kg
- Accessories Included: Two flexible UHF antennas, rack mount adapters, AC adapters
Belt Pack
- RF Power Output: High: 30mW; Low: 10mW, nominal
- Spurious Emissions: According to National Regulations
- Battery Type: 1.5V AA alkaline or rechargeable AA NiMH (not included)
- Current Consumption: 150 mA typical
- Battery Life: Approximately 9 hours (low), 7 hours (high)
- Dimensions: 66 mm x 92.3 mm x 22.5 mm (W x H x D)
- Net Weight: 80g
Delivery: 2-3 working days
