Microphones

Experience exceptional audio clarity and effortless discretion with the Audio Technica PRO44 Unidirectional Condenser Boundary Microphone. Perfectly suited for conference tables, podiums, and lecterns, this microphone boasts a sleek low-profile design that ensures minimal visibility without compromising on performance.Designed with a wide-range condenser element featuring a low-mass diaphragm, the PRO44 delivers superior sound quality for all your installed-sound needs. Its self-contained electronics eliminate the necessity for external power modules, making setup a breeze and ensuring a hassle-free user experience.Rugged in construction and reliable in operation, the PRO44 stands out with its outstanding durability, ready to withstand the demands of daily use. The included 25-foot detachable cable with TA3F to XLRM-type connectors provides flexibility in installation and ensures optimal connectivity.With a precision half-space unidirectional polar pattern, this boundary microphone captures sound with precision and clarity, making it an indispensable tool for professional audio applications. Elevate your sound reinforcement setup with the exceptional performance and discreet design of the Audio Technica PRO44 Unidirectional Condenser Boundary Microphone.Product Specifications General ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Half-cardioid (cardioid in hemisphere above mounting surface) FREQUENCY RESPONSE: 70-16,000 Hz OPEN CIRCUIT SENSITIVITY: -25 dB (56.2 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 114 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 86 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 66 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 9-52V, 2 mA typical OUTPUT CONNECTOR: TB3M-type CABLE: 25' (7.6 m) long, with TA3F and XLRM-type connectors Physical & Dimensions Height: 15mm Max. Width: 73mm Max. Length: 90.5mm Weight: 67g

Read more less

Enhance your audio setup with the Audio Technica PRO42 Miniature Unidirectional Condenser Boundary Mic. Designed for a variety of professional applications, this mic offers exceptional performance with its wide-range condenser element and low-mass diaphragm.The PRO42's very low-profile design ensures minimum visibility, making it perfect for discreet surface mounting in boardrooms, schools, houses of worship, and other installed settings. Its uniform polar pattern guarantees maximum rejection of unwanted sounds, delivering clear and precise audio reproduction for your stage performances, conferences, and recordings.Crafted with rugged construction, the PRO42 exudes durability, while the 25' (7.6m) permanently attached cable provides convenient connectivity with its XLRM-type connector. Say goodbye to external power modules as this mic comes equipped with self-contained electronics for hassle-free use.With its impressive specifications including a half-cardioid polar pattern, wide frequency response range, and high maximum input sound level, the PRO42 ensures professional-grade sound quality for your sound reinforcement, broadcasting, and recording needs. Elevate your audio experience with the Audio Technica PRO42 Boundary Mic - a reliable choice for exceptional audio performance in any setting.Product Specifications General ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Half-cardioid (cardioid in hemisphere above mounting surface) FREQUENCY RESPONSE: 70-14,000 Hz OPEN CIRCUIT SENSITIVITY: -38 dB (12.5 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 134 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 105 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 65 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 9-52V DC, 2 mA typical OUTPUT CONNECTOR: 3-pin XLRM-type on cable CABLE: 25' (7.6 m) long, permanently attached Physical & Dimensions Height: 15.5mm Max. Length: 54.3mm Max. Width: 36.6mm

Read more less

Capture every sound with unparalleled precision and clarity with the Sennheiser MKH 416-P48U3 Short Shotgun Interference Tube Microphone. This sophisticated microphone utilises the interference tube principle to deliver increased directivity, ensuring that your recordings are focused and free from unwanted background noise.Equipped with a super-cardioid/lobar pick-up pattern, this RF condenser microphone boasts exceptional sensitivity and low inherent self-noise, making it perfect for capturing even the most subtle nuances of sound. Whether you are working on a film set, in a radio studio, or for television broadcasts, the MKH 416 excels in delivering high consonant articulation and superior feedback rejection.Designed for versatility and durability, the MKH 416 features a transformerless and fully floating balanced output, guaranteeing superb audio quality even in challenging acoustic environments. Its rugged construction is built to withstand adverse climatic conditions, while the matt black all-metal body exudes a professional aesthetic.With a frequency response ranging from 40Hz to 20kHz, this microphone ensures that every detail of the audio spectrum is faithfully captured. The microphone's compact size and ergonomic design make it ideal for outside broadcast applications, allowing you to achieve exceptional sound quality on the go.Experience the difference that the Sennheiser MKH 416-P48U3 Short Shotgun Interference Tube Microphone can make in your audio productions. Elevate your recordings to professional levels and immerse your audience in the rich, pristine soundscapes you create.Product Specifications General Frequency response (Microphone): 40 - 20000 Hz Transducer principle (Microphone): RF condenser microphone Pick-up pattern: super-cardioid/lobar Sensitivity in free field, no load (1kHz): 25 mV/Pa +- 1 dB Nominal impedance: 25 Ω Min. terminating impedance: 800 Ω Equivalent noise level: 13 dB Equivalent noise level weighted as per CCIR 468-3: 24 dB Maximum sound pressure level (passive): 130 dB Current consumption: 2 mA Voltage: 48 +- 4 V Phantom Physical Dimensions: Ø 19 x 250 mm

Read more less

Immerse yourself in the world of professional audio production with the Audio Technica AT8015 Line+Gradient Shotgun Mic 460mm. Designed specifically for video production and broadcast (ENG/EFP) audio acquisition, this exceptional microphone offers a range of features that elevate your sound recording capabilities to new heights.🎤 Capture crystal-clear audio with the narrow acceptance angle of the AT8015, perfect for long-distance sound pickup. Say goodbye to unwanted noise interference from the sides and rear of the mic, thanks to its excellent sound rejection capabilities. Whether you are recording interviews, documentaries, or events, this microphone ensures that your audio is focused and precise.🔋 Versatile in its power options, the AT8015 operates on either battery or phantom power, providing you with flexibility for various recording setups. Compliant with RoHS standards, this microphone is free from substances specified in the EU directive on hazardous materials, ensuring a safe and environmentally friendly choice.🎶 The switchable low-frequency roll-off feature allows you to reduce the pickup of ambient noise such as traffic or room reverberation, giving your recordings a polished and professional sound. With a frequency response ranging from 40-20,000 Hz and an impressive dynamic range, the AT8015 delivers exceptional audio quality across a wide range of applications.Experience the difference in audio precision and clarity with the Audio Technica AT8015 Line+Gradient Shotgun Mic 460mm. Elevate your sound recording capabilities and capture every moment with unparalleled detail and accuracy.Product Specifications General ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Line + gradient FREQUENCY RESPONSE: 40-20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave OPEN CIRCUIT SENSITIVITY: Phantom: –38 dB (12.5 mV) re 1V at 1 Pa Battery: –39 dB (11.2 mV) re 1V at 1 Pa IMPEDANCE: Phantom: 250 ohms Battery: 300 ohms MAXIMUM INPUT SOUND LEVEL: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 72 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical BATTERY TYPE: 1.5V AA/UM3 BATTERY CURRENT / LIFE0.4 mA / 1200 hours typical (alkaline) SWITCH: Flat, roll-off OUTPUT CONNECTOR: Integral 3-pin XLRM-type Physical & Dimensions Length: 460mm Diameter: 21mm Weight: 195g

Read more less

Capture crystal-clear audio for your video recordings with the Sennheiser MKE 600 Shotgun Camera Microphone. This top-of-the-line microphone boasts impressive directivity, ensuring that it captures sound precisely from the direction your camera is pointed while effectively reducing noise from the sides and rear. The switchable "Low Cut" filter takes wind noise minimisation to the next level, guaranteeing professional-quality audio even in challenging filming conditions.Designed to meet the demands of filmmakers, the MKE 600 features a rugged all-metal housing for durability and reliability on set. Its superb suppression of structure-borne noise ensures that every sound recorded is crisp and clear, enhancing the overall quality of your videos.Switch between phantom or battery power with ease, allowing versatility in your setup. The battery switch includes a convenient "Low Batt" indicator to prevent unexpected power loss during shoots. Perfect for cameras and camcorders, the MKE 600 is a must-have tool for videographers seeking exceptional audio performance.Included with the microphone are a foam windshield and shock mount, providing additional protection against unwanted noise and vibrations. With a frequency response ranging from 40 Hz to 20 kHz and a maximum sound pressure level of 132 dB SPL at P48, the Sennheiser MKE 600 excels in capturing high-quality audio for your video projects. Elevate the audio recording capabilities of your camera setup with the professional-grade MKE 600 Shotgun Camera Microphone.Product Specifications General Microphone: super-cardioid/lobar Frequency response: 40 Hz to 20 kHz Max. sound pressure level: 132 dB SPL at P48; 126 dB SPL with battery powering Sensitivity in free field, no load (1kHz): 21 mV/Pa at P48; 19mV/Pa with battery powering Equivalent noise level: 15 dB (A) at P48; 16 dB (A) with battery powering Operating time: approx. 150 hrs Power supply: 48 V +/- 4V (P48, IEC 61938) or battery/rechargeable batt. 1,5V/1,2V AA size Current consumption: 4,4 mA at P48 Physical Dimensions: diameter 20 mm, length 256 mm Weight: 128 g (without battery)

Read more less

Experience unparalleled sound quality with the Audio Technica AT875R Line+Gradient Short-Shotgun Mic. Perfectly crafted for video production and broadcast audio acquisition, this mic boasts a compact design that effortlessly mounts on a DV camcorder or compact digital camera. 🎥Capture pristine audio with the extremely short length of under 7 inches, making it an ideal companion for on-the-go shooting. The narrow acceptance angle ensures clear long-distance sound pick up, while the remarkable sound rejection from the sides and rear of the mic guarantees excellent audio quality. 🎤Rest assured that the tailored response of this microphone minimises unwanted camera and handling noise, providing you with a smooth and professional audio experience. Operating solely on phantom power, the Audio Technica AT875R is a powerhouse with its fixed-charge back plate condenser and line + gradient polar pattern.Embrace the high-performance features of this microphone, including its natural-sounding on-axis audio quality and outstanding off-axis rejection. Elevate your audio production game with the Audio Technica AT875R Line+Gradient Short-Shotgun Mic - the ultimate companion for your video projects. 🌟Product Specifications General Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Line + gradient Frequency Response: 90-20,000 hz Open Circuit Sensitivity: -30dB (31.6mV), re 1V at 1 Pa Impedance: 100 ohms Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 107 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 74 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Output Connector: Integral 3-pin XLRM-type Physical & Dimensions Length: 175mm Diameter: 21mm Weight: 80g

Read more less

Enhance your home recording setup with the TASCAM TM-80 Condenser Microphone. Crafted with a high-quality 18-mm aluminium diaphragm, this microphone offers pristine sound reproduction, making it perfect for capturing everything from vocals to delicate acoustic instruments. The cardioid polar pattern ensures focused sound capture while minimising background noise, delivering professional-grade audio results.Designed for the discerning home recording enthusiast, the TM-80 features internal circuitry that is meticulously optimised to reduce unwanted noise and distortion, preserving the richness and fullness of your recordings. Included with the microphone are essential accessories such as an elastic shock mount to minimise vibrations, a mini desk stand for easy positioning, and a 1.8m XLR cable for convenient connectivity.With a frequency response ranging from 20 Hz to 20 kHz and a sensitivity of -38 dB ±2 dB, the TM-80 excels in capturing a wide range of audio nuances with clarity. Requiring phantom power of 9-48 V DC, this microphone offers a professional-level performance suitable for various recording applications. Its compact and durable die-cast zinc housing, measuring 48 mm x 165 mm x 48 mm and weighing only 300 g, ensures both portability and reliability.Immerse yourself in the world of high-quality audio capture with the TASCAM TM-80 Condenser Microphone - the perfect choice for achieving exceptional sound quality in your home recording studio.Product Specifications General Frequency response: 20 Hz to 20 kHz Sensitivity: –38 dB ±2 dB (0 dB = 1 V/Pa at 1 kHz) Phantom power required: 9–48 V DC Output impedance: 200 Ω ±30 % (at 1 kHz) Load impedance: >1 kΩ Maximum SPL: 136 dB (at 1 kHz, 1 % THD) S/N ratio: 77 dB Housing: Die cast zinc Physical & Dimensions Dimensions (W × H × D): 48 mm × 165 mm × 48 mm Weight: 300 g (mic body only)

Read more less

Introducing the TASCAM TM-70 Dynamic Microphone, meticulously crafted for podcasting and live streaming aficionados seeking unparalleled audio quality. Designed with a supercardioid directional pattern, this microphone is optimised to capture the essence of your voice while minimising background noise interference. The result? A pleasantly warm, authentic sound that immerses your listeners in every nuance of your vocal performance.Crafted with a robust construction, the TM-70 requires no additional power supply, allowing you to focus solely on your content creation without any distractions. Equipped with a suspension shockmount, tabletop stand, and cable, this microphone ensures you have everything you need for a flawless performance every time.With a frequency response and polar pattern tailored for podcast production and live reporting, the TM-70 guarantees that your voice takes centre stage, delivering a mix-ready sound without the need for extensive EQ adjustments. Let your voice shine, effortlessly captivating your audience with the TASCAM TM-70 Dynamic Microphone.Product Specifications General Transducer type: Dynamic Polar pattern: Supercardioid Frequency response: 30 Hz to 20 kHz Sensitivity: –51 dB ±3 dB (0 dB = 1 V/Pa at 1 kHz) Output impedance: 250 Ω ±30 % (at 1 kHz) Output connector: 3-pin XLR, male Physical Dimensions (L × Ø): 154 mm × 47 mm Weight: 285 g

Read more less

Introducing the Sontronics Podcast Pro Dynamic Supercardioid Microphone in striking Red. Tailored for those who seek unparalleled performance in podcasting, broadcasting, radio, voiceover, and gaming, this microphone embodies excellence in audio capture. With its precision-engineered dynamic supercardioid design, the Podcast Pro ensures crystal-clear clarity and depth, making every spoken word or sung note resonate with unmatched precision. The integrated pop filter and three layers of internal protection guarantee a professional sound free from unwanted noise, sibilance, or plosives, elevating the quality of your recordings to broadcast standards.Easy to set up and position, this British-made microphone is compatible with any mic stand, desktop, or gaming console, thanks to its XLR connection. Whether you are recording in a professional studio, from the comfort of your home, or on the move, the Podcast Pro is your trusty companion for all your audio needs.Backed by Sontronics' exclusive Lifetime Warranty, this dynamic microphone is available in a bold array of colours to suit your style. Let the Sontronics Podcast Pro transform your podcasts, broadcasts, voiceovers, and gaming sessions into captivating audio experiences that leave a lasting impression. Unleash the true power of your voice with the Sontronics Podcast Pro Microphone.Product Specifications General Microphone type: Dynamic Polar pattern: Supercardioid Frequency response: 50Hz–15kHz Sensitivity: -50dB ±2dB Impedance: ≤600 Ohms Connector: Three-pin XLR Power: Phantom power NOT required Physical & Dimensions Dimensions: 180 x 82 x 60mm Weight: 308g

Read more less

Experience the industry standard of excellence with the Electro-Voice RE50B Dynamic Omnidirectional Interview Microphone in Black. Designed for broadcast television production, this microphone is a trusted choice for interviewers worldwide, from high-profile figures to everyday individuals. Equipped with an omnidirectional polar pattern, the RE50B ensures exceptional sound capture from all directions, making it ideal for on-the-go interviews.The dynamic element of the RE50B minimises handling noise through its innovative Dyna-Damp™ technology, providing crystal-clear audio quality. Its robust construction is impervious to wind noise and p-pops, thanks to the integrated four-stage pop filter. Whether facing high humidity, temperature extremes, or corrosive salt air, this microphone is built to withstand the rigours of professional use.Crafted with a sleek aluminium case finished in a semi-gloss camera black, the RE50B exudes a professional aesthetic that complements its outstanding performance. The mic-in-a-mic shock mount system further enhances its audio clarity, ensuring that your interviews sound pristine in any environment.From its impressive frequency response range of 80 - 13,000 Hz to its low impedance of 150 Ω, the Electro-Voice RE50B is a powerhouse of reliability and versatility. Elevate your interview recordings with this iconic microphone that stands tall at 197mm in height and weighs only 0.27kg, offering a lightweight yet durable solution for your broadcasting needs. Experience unmatched audio quality and reliability with the Electro-Voice RE50B.Product Specification General Case Material: Aluminum Connector Type: 3-pin XLR Diameter (Max): 49 mm (1.93") Element: Dynamic Finish: Semi-Gloss Camera Black Frequency Response: 80 - 13,000 Hz Impedance, Low-Z balanced: 150 Ω Mic Type: Handheld Open Circuit Voltage: 1.6 mV/Pascal Polar Pattern: Omni Power Requirement: Passive Physical & Dimensions Height: 197mm Weight: 0.27kg

Read more less

Immerse yourself in the realm of professional audio quality with the Audio Technica AT2040 Hypercardioid Dynamic Podcast Microphone + AT8487 Clamp. Crafted to cater to the discerning needs of podcasters, streamers, YouTubers, and content creators, this dynamic XLR microphone stands as a beacon of broadcast excellence.🎙️ Step into a world where warm and assertive broadcast sound is your constant companion, ensuring that your voice resonates with clarity and authority in every recording.🔊 Let the large diaphragm of this microphone pave the way for a smooth and natural sound profile, enriched by low noise levels that elevate your audio recordings to professional standards.🎤 Delve into the realm of superior internal pop filtering, courtesy of the multistage foam mesh windscreen, which acts as a shield against disruptive pops and hisses, allowing your voice to shine through with pristine clarity.🛡️ Fear not the intrusion of unwanted noise and vibration, for the integrated shock mount of the AT2040 ensures that your recordings remain undisturbed by external disruptions, maintaining a consistent audio quality throughout.🌟 Revel in the benefits of the hypercardioid polar pattern, masterfully designed to reduce the pickup of sounds from the sides and rear, ensuring maximum vocal isolation and spotlighting your voice as the centrepiece of every recording.🎁 Indulge in the comprehensive package that accompanies the AT2040, including a pivoting stand mount, 5/8"-27 to 3/8"-16 threaded adapter, and a soft protective pouch, providing you with the tools needed to embark on a seamless recording journey.Embark on a transformative audio experience with the Audio Technica AT2040 Hypercardioid Dynamic Podcast Microphone, where every word uttered echoes with professional clarity and precision, setting the stage for a podcasting endeavour like no other.Product Specifications Element: Dynamic Polar Pattern: Hypercardioid Frequency Response: 80-16,000 Hz Open Circuit Sensitivity: -53 dB (2.2 mV) (0 dB=1 V/Pa, 1 kHz) Impedance: 600 ohms Weight: 615 g (21.7 oz) Dimensions: 145.3 mm (5.72") long, 52 mm (2.05") maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Included: AT8487 mounting clamp, 5/8”-27 to 3/8”-16 threaded adapter, Pouch Audio-Technica Case Style: R13

Read more less

Introducing the Sontronics DRUMPACK, a meticulously crafted five-piece condenser microphone set that stands as the pinnacle of excellence in capturing the dynamic and nuanced sounds of your drum kit. This exceptional bundle features award-winning DM-series microphones, each meticulously designed to bring out the best in your drums, from the thunderous kick to the intricate nuances of the toms.🎤 Capture the Essence: Crafted over three years of dedicated research and development, the Sontronics DM-series microphones bear the signature of industry experts and top musicians. They have graced the kits of renowned drummers like Dave Grohl and Joey Kramer, a testament to their exceptional quality.🥁 Precision in Every Detail: The DM-1B, dedicated to kick drums, boasts a large-diaphragm design that effortlessly captures the full dynamic range and power of your kick drum. With impressive sensitivity, low self-noise, and the ability to handle up to 155dB SPL, it ensures unparalleled clarity and punch in every beat.🪘 Versatility Redefined: The DM-1S for snare and DM-1T for tom tom offer a small-diaphragm cardioid condenser design, each equipped with a -10dB pad and capable of handling up to 135dB SPL. Whether it's the crisp crack of the snare or the resonant tones of the toms, these microphones deliver pristine sound quality with every hit.🎶 Complete Package: This DrumPack includes the DM-1B for kick drum, DM-1S for snare, and three DM-1T microphones for tom toms, accompanied by four mic clips, all securely housed in a rugged ABS flight case. This comprehensive set not only ensures optimal sound capture but also provides convenient portability and protection for your valuable equipment.Experience the Sontronics DRUMPACK – a harmonious blend of innovation, precision, and quality that elevates your drumming performances to new heights. Take advantage of this exclusive offer and save over 30% compared to purchasing the microphones individually. Elevate your sound and unleash the true potential of your drum kit with the Sontronics DRUMPACK.Product Specifications General Polar pattern (all mics): Cardioid Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10) Filter (STC-10 only): Linear/75Hz Freq. response: 20Hz - 20kHz (DM-1B), 30Hz - 20kHz (DM-1S & 1T, STC-10) Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B), 8mV/Pa -42dB ±2dB (DM-1S & 1T), 11mV/Pa -39dB ±2dB (STC-10) Impedance (all mics): ≤200 Ohms Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10) Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10) Power sources (all mics): 48V ±4V phantom power required Connector (all mics): 3-pin XLR Physical & Dimensions Dimensions 144 x 72 x 72mm (DM-1B), 91 x 22 x 22mm (DM-1S & 1T), 150 x 21 x 21mm (STC-10) Weight 829g (DM-1B) 86g (DM-1S & 1T) 125g (STC-10) Supplied with: 4X Mic clips & ABS flightcase

Read more less

Introducing the Sontronics DM1B Cardioid Condenser Microphone, the essential tool for capturing the heart-pounding essence of kick drums and bass instruments in exquisite detail. 🎤Crafted with precision and expertise, the DM1B is a testament to superior British design, dedicated to elevating your audio recordings to a whole new level. Specifically engineered for kick drums and bass instruments, this large-diaphragm condenser microphone boasts a fixed cardioid pattern, ensuring focused and nuanced sound capture like never before.Designed to excel in both live performances and studio recordings, the DM1B stands out for its exceptional sensitivity, minimal self-noise, and a remarkable ability to handle up to 155dB SPL without breaking a sweat. Whether capturing the thunderous attack of a kick drum or the rich harmonics of a bass guitar cabinet, this microphone delivers unparalleled sonic clarity and depth.The DM1B's versatility extends beyond just drums and bass, as it excels in capturing the low-frequency nuances of various instruments, from brass to woodwinds, ensuring every note is captured with precision and warmth. Users have also praised its performance on deep male vocals, rap verses, and beatboxing sessions, showcasing its adaptability across diverse musical genres.Position the DM1B with ease, whether placed at the front head of a drum or strategically positioned inside the kick drum's soundhole, thanks to its ingeniously designed end-fire cardioid condenser. Accompanied by an adjustable yoke mount and housed in a robust aluminium flight case, the DM1B is not just a microphone but a reliable companion for all your recording endeavours.Elevate your sound, capture the essence of your music, and unleash the full potential of your recordings with the Sontronics DM1B Cardioid Condenser Microphone. Backed by the Sontronics LIFETIME WARRANTY, this microphone is more than just a purchase – it's an investment in the perfection of sound. A must-have for any discerning musician or audio enthusiast seeking professional-grade quality.Product Specifications General Polar pattern: Cardioid Pad: 0dB, -15dB Frequency response: 20Hz - 20kHz Sensitivity: 6mV/Pa -45dB ±2dB (0dB = 1V/Pa @ 1,000Hz) Impedance: ≤200 Ohms Equivalent noise level: 14dB (A-weighted) Max. SPL (for 0.5% THD @ 1,000Hz): 155dB (with -15dB pad switched in) Power: Phantom power 48V required Connector: 3-pin XLR Physical & Dimensions Weight: 804g Dimensions: 144 x 72 x 72mm Comes with: aluminium flightcase

Read more less

Experience the unparalleled performance of the Shure BETA 56A Close Drum Mic for Snare and Drum with Shock Mount. This dynamic microphone is meticulously crafted to elevate your live performances with precision, reliability, and ruggedness synonymous with the Shure brand.🎤 Delve into a world of superior sound quality with the tailored frequency response specifically engineered for drums, amplified instruments, and horns. The uniform supercardioid pick-up pattern ensures maximum gain before feedback and impeccable off-axis sound rejection, allowing your instrument to shine amidst even the loudest environments.🎶 Featuring a neodymium magnet for heightened sensitivity and increased output, this microphone captures the nuances of your performance with exceptional clarity. The advanced pneumatic shock mount system effectively minimises mechanical noise and vibrations, ensuring a pristine audio output every time.💪 Built to withstand the demands of live performances, the dent-resistant steel mesh grille and enamel-coated die-cast metal construction of the BETA 56A guarantee durability and longevity, even in the face of wear and tear.🎚️ Experience unparalleled flexibility and ease of use with the integrated swivel-mount, dynamic locking system, and XLR connector. The compact design reduces stage clutter, allowing you to focus on your craft without distraction.🥁 Elevate your sound to new heights with the Shure BETA 56A Close Drum Mic - where reliability, precision, and performance converge to deliver a true masterpiece in live audio reproduction.Product Specifications Cartridge Type: Dynamic (moving coil) Frequency Response: 50 to 16,000 Hz Polar Pattern: Supercardioid Output Impedance: 150 Ω Sensitivity (at 1kHz, open circuit voltage): −51 dBV/Pa (2.8 mV) 1 Pascal=94 dB SPL Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight: Net: 0.468 lg (1.6 lbs) Connector: Three-pin professional audio (XLR), male

Read more less

Experience the unparalleled quality and performance of the Shure BETA 52A Bass Drum (Stand Mount Type) Dynamic Supercardioid Mic. Crafted to meet the exacting demands of professional musicians, this microphone is meticulously designed to capture the deep, punchy sound of kick drums and bass instruments with precision and clarity.🎤 Boasting a tailored frequency response specifically for kick drums and bass, the Beta 52A ensures that every beat is reproduced with exceptional detail and accuracy. The supercardioid design provides maximum isolation from other onstage sounds, allowing your bass instruments to take centre stage without interference.🎤 With its ability to handle high sound pressure levels, the Beta 52A is the perfect choice for capturing the raw power and energy of live performances. Whether you're miking up a kick drum, bass amp, or acoustic bass, this microphone delivers studio-quality performance both on stage and in the studio.🎤 The hardened steel mesh grille of the Beta 52A is not only durable but also ensures resistance to wear and abuse, making it a reliable companion for countless performances. The advanced pneumatic shock mount system minimises mechanical noise and vibration, guaranteeing a clean and professional sound every time.🎤 Designed for reliability, the Beta 52A features a neodymium magnet for a high signal-to-noise ratio output and low sensitivity to varying load impedance. With legendary Shure quality and reliability, you can trust that the Beta 52A will consistently deliver outstanding performance, night after night.🎤 Elevate your sound and capture the full impact of your bass instruments with the Shure BETA 52A Bass Drum (Stand Mount Type) Dynamic Supercardioid Mic. Experience the professional quality and durability that sets Shure apart, and take your performances to the next level.Product Specifications General Frequency Response: 20 Hz – 10 kHz Frequency Response: Tailored Sensitivity: -64.00 dBV/Pa – 0.60 mV/Pa Sound Pressure: 174 dB dB Transducer Type: Dynamic Polar Pattern: Supercardioid Switchable low cut: No Connectors: XLR Attenuator: No Interchangeable Capsule: No Main Functionality: Performance Headphone Output: No Cartridge: Fixed Physical & Dimensions Weight: 605g Height: 162.7mm Width: 95.25mm Depth: 113mm

Read more less

Experience the unparalleled excellence of the Shure BETA 91A Kick Drum (Boundary Type) Condenser Mic. Crafted with precision engineering, this microphone stands as a beacon of innovation in the realm of sound capture.🎤 The BETA 91A is the ultimate tool for kick drums, meticulously designed to deliver a powerful low-end response like no other. Its half-cardioid condenser boundary microphone, complete with an integrated XLR preamplifier, ensures a seamless audio performance tailored for bass frequency applications.🎶 Unleash studio-quality sound with unmatched clarity, even in high-pressure environments, thanks to its superior attack and punch. The two-position contour switch allows you to customise the sound signature according to your needs, providing versatility that elevates your musical creations to new heights.🔊 Maximise efficiency and minimise clutter with the low-profile design that seamlessly integrates the preamplifier and XLR connector. With a frequency response specifically tailored for kick drum and low-frequency applications, the BETA 91A promises maximum gain-before-feedback and rejection of off-axis sound – a true testament to its engineering excellence.✨ Elevate your audio experience with the Shure BETA 91A Kick Drum Condenser Mic – where precision meets passion, and every beat resonates with unparalleled clarity and power.Product Specifications General Frequency Response: 20 Hz – 20 kHz Frequency Response: Tailored Sensitivity: -48.50 dBV/Pa – 3.80 mV/Pa Equivalent Selfnoise: 29,5 dB(A) Sound Pressure: 155 dB dB Transducer Type: Condenser Polar Pattern: Halfcardioid Switchable low cut: No Connectors: XLR Attenuator: No Interchangeable Capsule: No Main Functionality: Performance Headphone Output: No Requires Phantom Power: 11 - 52 VDC Cartridge: Fixed Physical & Dimensions Weight: 470 g

Read more less

Experience the industry-standard in professional audio with the Shure SM57 Dynamic Cardioid Instrument/Vocal Microphone. Renowned for its exceptional quality and versatility, the SM57 is the go-to choice for musicians, sound engineers, and recording artists worldwide.🎤 Capture the pure essence of your sound: With its contoured frequency response, this microphone ensures clean and precise pick-up, delivering rich, natural instrument and vocal reproduction.🎶 Bring your performances to life: Whether you're miking up your guitar amp, bass amp, saxophone, trumpet, or drums, the SM57 excels in reproducing the true character of your instrument, making it perfect for both live stages and studio recording.🔊 Cut through the mix effortlessly: The uniform cardioid pickup pattern isolates the primary sound source, reducing background noise and capturing your performance with exceptional clarity and definition.🎛️ Built to endure the demands of professional use: Featuring a robust pneumatic shock-mount system and constructed from die-cast steel, this microphone is extremely durable and reliable even under the heaviest of applications.Unleash your creativity and elevate your sound with the legendary Shure SM57 Dynamic Cardioid Microphone. Your performances deserve nothing less than the best.Product Specifications General Frequency Response: 40 Hz – 15 kHz Frequency Response: Tailored Sensitivity: -56.00 dBV/Pa – 1.60 mV/Pa Transducer Type: Dynamic Polar Pattern: Cardioid Switchable low cut: No Connectors: XLR Attenuator: No Interchangeable Capsule: No Main Functionality: Performance Headphone Output: No Cartridge: Fixed Impedance: Rated impedance is 150Ω (310Ω actual) for connection to microphone inputs rated low impedance. Case: Dark gray, enamel-painted, die-cast steel with a polycarbonate grille and a stainless steel screen. Physical & Dimensions Weight: 284g Height: 157mm Width: 32mm Depth: 32mm

Read more less

Experience unparalleled clarity and precision in your live performances with the Sennheiser e908b Cardioid Condenser Gooseneck Wind Instrument Microphone. This exceptional piece of audio equipment boasts an incredibly lively and clear sound, ensuring every note and nuance is captured with stunning accuracy. Setting up the e908b is a breeze, thanks to its quick and flexible design that includes a mounting clamp for added convenience. The long-necked, flexible boom allows for optimal positioning, while the integrated shock absorber effectively eliminates any handling noise, guaranteeing a professional and polished sound output.The e908b is more than just a microphone; it's a versatile tool that excels in capturing the dynamic range of wind instruments, congas, and drums. Its free-floating suspension system ensures that every sound is captured with precision and finesse. The cardioid condenser clip-on mic delivers high-end sound quality, combining the richness of a condenser microphone with the reliability of professional stage equipment.Whether you're a seasoned performer or a passionate musician, the Sennheiser e908b is designed to meet your every need. Its open and high-definition character produces forceful sounds with crystal-clear definition, making every performance truly outstanding. With its shock-mounted head, gooseneck, and special clips, the e908b can be easily attached and precisely oriented to capture the perfect sound.Crafted for durability and reliability, the e908b can withstand even the most vigorous performances, ensuring consistent and exceptional sound quality every time. Choose from four models to suit your specific needs, whether you're miking drums, percussion, wind instruments, or saxophones wirelessly. Unleash the full potential of your musical talent with the Sennheiser e908b Cardioid Condenser Gooseneck Wind Instrument Microphone. Elevate your performances to new heights and let your music shine with unparalleled clarity and definition.Product Specifications General Transducer principle (Microphone): pre-polarised condenser microphone Pick-up pattern: cardioid Frequency response: 40 ... 20 000 Hz Sensitivity in free field, no load (1kHz): 4 mV/Pa, 0,56mV/Pa (e 908T-ew) Nominal impedance: 100 Ohm (e908B & e908D) Min. terminating impedance: 2000 Ohm (e908B & e908D) Equivalent noise level: e908B-ew = 30 dB(A); e908B & e908D = 35 dB(A), e908T-ew = 39 dB (A) Max. Sound pressure level (active): 147 dB Phantom powering: 12 - 48 V / 3 mA (e908B & e908D) Physical & Dimensions Connector: e 908 B & D = XLR-3; e908 B ew & T ew = 3.5mm mini jack Dimensions: 47 x 193 mm Weight: 140 g

Read more less

Experience unparalleled sound quality with the Sennheiser e906 Dynamic Supercardioid Instrument Mic. Tailored for guitarists, drummers, and brass players, this mic delivers a lively, full sound with a very fast attack, ensuring every note is captured with precision.The e906's flat microphone body is specifically crafted for guitar amps, allowing for optimal placement without the need for a stand. Its three adjustable sound characteristics - bright, normal, and smooth - offer versatility to suit your tone preferences. Additionally, the presence filter enhances the presence range, ensuring your sound cuts through effortlessly.Crafted with a rugged metal body, the e906 is built to withstand the demands of live performances and studio sessions. Its supercardioid pick-up pattern hones in on the instrument's sound while rejecting unwanted noise, delivering a high-resolution, natural sound without any distortion.Whether you're aiming for a clean sound or a more aggressive tone, the Sennheiser e906 excels in capturing every facet of your performance. Elevate your sound quality and unlock your instrument's true potential with this exceptional dynamic instrument mic.Product Specifications General Transducer principle (Microphone): dynamic Pick-up pattern: super-cardioid Frequency response: 40...18000 Hz Sensitivity in free field, no load (1kHz): 2.2 mV/Pa Nominal impedance: 350 Ohm Min. terminating impedance: 1000 Ohm Physical & Dimensions Connector: XLR-3 Dimensions: 55 x 34 x 134 mm Weight: 140 g

Read more less

Experience the ultimate in drum mic excellence with the Sennheiser e904 Dynamic Cardioid Clip-on Drum Microphone. Delivering a full, lively sound that captures the essence of drums and percussion instruments, this microphone is the epitome of precision and quality.Boasting a very fast attack and a compact body, the e904 ensures that every beat is accurately reproduced with unparalleled clarity. Its exceptional sound profiling adapts effortlessly to all percussive styles, making it a versatile choice for drummers of all genres.Equipped with a hum-compensating coil, the e904 is specifically designed for mounting on toms and snare drums. Its cardioid dynamic instrument microphone configuration guarantees a transparent and harmonic sound profile that can be perfectly tailored to suit your mix.With a robust build that can withstand the most vigorous drumming, the e904 offers reliability and durability without compromising on performance. The practical clip design allows for effortless attachment to snare and tom-tom rims, while its compact form ensures minimal space consumption.Experience the power and precision of the Sennheiser e904 Dynamic Cardioid Clip-on Drum Microphone and elevate your drumming performance to new heights. Ideal for professional drummers seeking uncompromising quality and exceptional sound reproduction, this microphone is a must-have for any drum kit setup.Product Specifications General Transducer principle (Microphone): dynamic Pick-up pattern: cardioid Frequency response: 40...18000 Hz Sensitivity in free field, no load (1kHz): 2 mV/Pa Nominal impedance: 350 Ohm Min. terminating impedance: 1000 Ohm Physical & Dimensions Connector: XLR-3 Dimensions: 63 x 41 mm Weight: 125 g

Read more less

Immerse yourself in the low-end world of sound excellence with the Sennheiser e902 Dynamic Cardioid Bass / Kick Drum Microphone. Expertly crafted to capture the deepest bass signals with utmost precision and clarity, this microphone stands out as a reliable choice for kick drums, bass guitar-amps, tubas, and other bass instruments. Designed with a focused frequency response optimized for kick drums, the e902 ensures a clean and clear pick-up of even the most powerful bass tones, delivering a tight punch with firm, well-defined bass sounds. Its robust metal body and shock-mounted capsule guarantee durability and reliability, meeting the demands of intense live performances without skipping a beat.The cardioid pick-up pattern of the e902 allows for exceptional sound isolation, resulting in a full-bodied, precise kick that effortlessly cuts through the mix in any band context. Whether you prefer warm and rounded tones or sharp and direct sounds, the e902 offers flexibility in shaping your audio by simply adjusting its positioning within the drum set.With features such as a very fast attack, integral stand mount, hum-compensating coil, and a contoured frequency response that emphasises the high-end and bass frequencies, the Sennheiser e902 stands as a testament to quality and performance in the realm of bass and kick drum microphones. Elevate your sound and experience the power of the deepest lows with the Sennheiser e902 Dynamic Cardioid Bass / Kick Drum Microphone.Product Specifications General Transducer principle (Microphone): dynamic Pick-up pattern: cardioid Frequency response: 20...16000 Hz Sensitivity in free field, no load (1kHz): 0.2 mV/Pa; (60 Hz): 0.6 mV/Pa Nominal impedance: 350 Ohm Min. terminating impedance: 1000 Ohm Physical & Dimensions Connector: XLR-3 Dimensions: 128.5 x 60 mm Weight: 440 g

Read more less

Experience the powerful precision and superior sound quality of the Sennheiser e901 Condenser Boundary Half-Cardioid Kick-Drum Microphone. Designed specifically for kick drums, this microphone boasts a frequency response optimised to capture the nuances of the low-end frequencies with exceptional clarity.With its very fast attack, the e901 ensures that every kick drum hit is captured with lightning-fast accuracy, adding a realistic touch to your performances. You'll appreciate the integrated preamp, which enhances the microphone's functionality and makes it a breeze to connect with its gold-plated standard XLR plug – no special adapter cable required.Crafted to endure the demands of stage performances, the e901 is highly robust and can handle very high sound pressure levels without compromising on audio quality. The slip-free, dampening rubber pad underneath ensures a secure placement, eliminating any concerns about slippage during intense drumming sessions.Not only does the Sennheiser e901 deliver exceptional audio performance, but it also simplifies your setup with its boundary design, eliminating the need for a microphone stand specifically for kick drum applications. The TEC Award Winner 2005 accolade further attests to the microphone's outstanding technical achievement, establishing itself as a reliable choice in the realm of microphone technology and sound reinforcement.Unlock the full potential of your kick drum sound with the Sennheiser e901. Elevate your drumming experience with its unparalleled precision, durability, and efficiency – a must-have for any drummer or audio professional looking to enhance their sonic capabilities.Product Specifications General Transducer principle (Microphone): pre-polarised condenser microphone Pick-up pattern: half-cardioid Frequency response: 20...20 000 Hz Sensitivity in free field, no load (1kHz): 0.5 mV/Pa Nominal impedance: < 100 Ohm Min. terminating impedance: 1000 Ohm Max. Sound pressure level (active): 154 dB / SPL Phantom powering: 48 V / 1.1 mA Physical & Dimensions Connector: XLR-3 Dimensions: 126.5 x 105 x 26.5 mm Weight: 550 g

Read more less

Experience unmatched clarity and precision with the Sennheiser e600 evolution Drum Set with Case. This comprehensive drum mic kit is your ultimate solution for achieving professional-grade audio recordings.🎤 The e 602-II cardioid mic delivers deep, impactful sound reproduction, perfect for capturing the rich tones of bass drums, bass guitar cabs, and tubas.🎤 The 4x e 604 cardioid mics are designed for toms, snares, and percussion, ensuring that each beat is captured with clarity and definition. Their rugged build and easy clip-on feature make them reliable companions for any drum setup.🎤 The 2x e 614 super-cardioid condenser mics excel in capturing the intricate details of cymbals and overheads. With extended frequency response, high SPL handling, and exceptional transient response, these mics elevate your instrument recordings to a new level of excellence.Crafted for versatility and durability, the e600 Drum Mic Kit comes complete in a heavy-duty case, providing optimal protection for your valuable equipment. Whether you're in the studio, at a club, in rehearsal rooms, at smaller gigs, or recording at home, this kit is designed to meet all your drum mic needs.Experience superior sound quality and reliability with the Sennheiser e600 evolution Drum Set with Case. Elevate your drum performances to a professional standard with this complete drum mic solution.Product Specifications e 614: Dimensions: Ø 20mm, L = 100mm Weight: 93 g Connector: XLR-3 Frequency response: 40 - 20000 Hz Max. sound pressure level: 139 dB/SPL Transducer principle: pre-polarised condenser microphone Pick-up pattern: super-cardioid Sensitivity in free field, no load (1kHz): 3 mV/Pa = - 50dB (0 dB = 1 V/Pa) Nominal impedance: 50 Ω Min. terminating impedance: 1000 Ω Phantom powering: 12 – 52 V / 3 mA Equivalent noise level: 24 dB(A) Equivalent noise level weighted as per CCIR 468-3: 35 dB 602 ii: Dimensions: Ø 60 x 153 mm Weight: 318 g Connector: XLR-3 Transducer principle (Microphone): dynamic Frequency response: 20 - 16000 Hz Pick-up pattern: cardioid Sensitivity in free field, no load (1kHz): 0,25 mV/Pa; (50 Hz) 0,9 mV/Pa Nominal impedance: 350 Ω Min. terminating impedance: 1000 Ω e 604: Dimensions: Ø 33 x 59 mm Weight: 60 g Connector: XLR-3 Frequency response (Microphone): 40 - 18000 Hz Transducer principle (Microphone): dynamic Pick-up pattern: cardioid Sensitivity in free field, no load (1kHz): 1,8 mV/Pa Nominal impedance: 350 Ω Min. terminating impedance: 1000 Ω

Read more less

Experience the unparalleled audio excellence with the Sennheiser e609 Supercardioid Silver Guitar Microphone. Specially crafted for miking guitar cabs face-on, this microphone encapsulates the essence of precision and clarity in sound amplification. Its rugged metal body and advanced shock-mount design ensure durability and stability, making it a reliable companion for any musician.Designed to be extremely close to the signal source, the e609 Silver offers a super-cardioid pick-up pattern that captures the essence of your guitar amp's sound with exceptional directness. The hum compensating coil further enhances the audio quality, delivering a pristine sound reproduction that is second to none.The lightweight voice coil construction and rigid dome of the e609 Silver microphone contribute to its extended high-frequency performance, enabling you to capture every nuance of your guitar's tone effortlessly. The super-cardioid pick-up pattern provides excellent isolation from other on-stage signals, ensuring that your guitar's sound remains the focal point of your performance.With a flat design that facilitates easy positioning, the Sennheiser e609 Silver microphone is a versatile and indispensable tool for any guitarist looking to achieve professional-grade sound quality. Elevate your sound to new heights and unleash the full potential of your guitar amp with the exceptional performance of the Sennheiser e609 Supercardioid Silver Guitar Microphone.Product Specifications General Frequency response (microphone): 40.....15000 Hz Transducer principle (Microphone): dynamic Pick-up pattern: super-cardioid Sensitivity in free field, no load (1kHz): 1,5 mV/Pa Nominal impedance: 350 Ohm Min. terminating impedance: 1000 Ohm Physical & Dimensions Dimensions: 55 x 34 x 134 mm Connector: XLR-3 Weight: 140 g

Read more less

Experience the epitome of audio precision with the Sennheiser e608 Supercardioid Mini Clip-on Mic. Crafted for perfection, this microphone boasts a rugged reinforced glass-fibre body that ensures durability while maintaining a lightweight profile. The shock-mounted capsule minimises sensitivity to impact and handling noise, providing a pristine audio experience every time.Designed with the needs of brass and woodwind players in mind, the Sennheiser e608 features a flexible gooseneck that elegantly positions the mic close to the instrument for optimal sound capture. The multifunctional clip allows for seamless placement on various instruments, ensuring versatility and a perfect fit.Engineered with a super-cardioid pick-up pattern, this microphone excels at capturing the subtle nuances of woodwind, brass instruments, and drums with exceptional clarity. The hum compensating coil and robust connection cable with an XLR connector elevate the overall performance, delivering professional-grade sound quality.Experience the true essence of your instrument with the Sennheiser e608. Its ability to capture soft, warm tones brings out the character of each performance, immersing you in a world of rich, vibrant sound. Get closer to the heart of your music with the Sennheiser e608 Supercardioid Mini Clip-on Mic – where every note resonates with passion and authenticity.Product Specifications General Transducer principle (Microphone): dynamic Pick-up pattern: super-cardioid Frequency response (microphone): 40.....16000 Hz Sensitivity in free field, no load (1kHz): 0.8 mV/Pa Nominal impedance: 250 Ohm Min. terminating impedance: 1000 Ohm Physical & Dimensions Connector: XLR-3 Dimensions: d 17 x 185 mm Weight w/o cable: 20 g

Read more less

Immerse yourself in the unparalleled quality of the Sennheiser e604 3-Pack Compact Dynamic Cardioid Drum Microphone with Clip. This set of three e604 microphones epitomises excellence in capturing drum sounds with precision and clarity, making it a must-have for any discerning musician or sound engineer.🎤 Unleash the power of low sensitivity to impact and handling noise with these remarkable microphones, ensuring every beat and strike is flawlessly recorded without interference.🎤 Revel in the exceptional sound pressure handling capability of the e604, allowing you to push the limits and capture dynamic performances without distortion or compromise.🎤 The e604's compact design and integral stand mount make it a breeze to position, giving you the flexibility to achieve the perfect angle and proximity to your drums for optimal sound capture.🎵 With a character that resonates authenticity and a sound profile designed to accentuate the nuances of your music, the e604 delivers a close and powerful presence that sets it apart from the mainstream.🎵 Experience the warmth and dynamic range of the e604 on tom-toms, snares, and even woodwind instruments, thanks to its expertly crafted sound design inspired by the legendary MD 421 microphone.Crafted with a rugged reinforced glass-fibre body, the e604 is built to withstand the rigours of the stage and studio environment while maintaining its exceptional performance.📐 Specifications:- Frequency response: 40 - 18000 Hz- Transducer principle: dynamic- Pick-up pattern: cardioid- Sensitivity: 1.8 mV/Pa- Nominal impedance: 350 Ω- Weight: 60 g- Dimensions: Ø 33 x 59 mm- Connector: XLR-3Embrace the essence of professional sound engineering with the Sennheiser e604 3-Pack Compact Dynamic Cardioid Drum Microphone with Clip. Elevate your drum recordings to new heights of clarity and richness with this iconic microphone set designed to capture the true spirit of your music.Product Specifications General Frequency response (Microphone): 40 - 18000 Hz Transducer principle (Microphone): dynamic Pick-up pattern: cardioid Sensitivity in free field, no load (1kHz): 1,8 mV/Pa Nominal impedance: 350 Ω Min. terminating impedance: 1000 Ω Physical & Dimensions Weight: 60 g Dimensions: Ø 33 x 59 mm Connector: XLR-3

Read more less

Experience the unparalleled quality and exceptional performance of the Sennheiser e604 Compact Dynamic Cardioid Drum Microphone with Drum Clip. Designed with a rugged reinforced glass-fibre body, this microphone showcases a low sensitivity to impact and handling noise, ensuring a pristine sound capture every time.The e604 boasts a very high sound pressure handling capability, making it ideal for capturing the dynamics and nuances of drum performances with precision. Its low distortion design guarantees crystal-clear audio reproduction, while the hum-compensating coil eliminates background noise for a pure sound output.Positioning the e604 is a breeze, thanks to its compact design and integral stand mount. Whether you're placing it on a tom-tom or snare, this microphone offers versatility and flexibility to achieve the perfect angle for optimal sound capture.Renowned for its character and unique sound profile, the e604 delivers a forceful sound that is open and clear in the lows, with a lightly emphasised upper mids and highs. This microphone adds warmth and dynamic presence to snare drums, while also providing a marked spaciousness to woodwind instruments.Make no compromise on sound quality - equip your drum kit with the Sennheiser e604 and elevate your performance to new heights.Product Specifications General Frequency response (Microphone): 40 - 18000 Hz Transducer principle (Microphone): dynamic Pick-up pattern: cardioid Sensitivity in free field, no load (1kHz): 1,8 mV/Pa Nominal impedance: 350 Ω Min. terminating impedance: 1000 Ω Physical & Dimensions Weight: 60 g Dimensions: Ø 33 x 59 mm Connector: XLR-3

Read more less

Introducing the Sennheiser e602II Dynamic Cardioid Bass Instrument and Drum Microphone, a true gem for professional musicians and sound engineers alike. Crafted with a rugged yet lightweight aluminium body, this microphone offers unparalleled stability when positioned on long boom arms, ensuring precise sound capture every time.Designed with a lightweight high-performance voice coil construction, the e602II delivers a fast transient response that is ideal for capturing the nuances of bass drums, bass guitar cabs, tubas, and other low-frequency instruments. Its frequency-independent directivity provides exceptional isolation from other on-stage signals, making it a reliable choice for live performances and studio recordings.The e602II boasts a unique combination of low frequency extension and mid band attenuation, resulting in an ultra-smooth pre-shaped signal that eliminates the need for corrective equalisation. With a humbucking coil and integral stand mount, this cardioid dynamic microphone is not only versatile but also easy to set up and use.Experience the unparalleled sound quality and performance of the Sennheiser e602II Dynamic Cardioid Bass Instrument and Drum Microphone. Elevate your audio recordings to new heights with this exceptional piece of audio engineering.Product Specifications General Sensitivity in free field, no load (1 kHz): 0.25 mV/Pa Sensitivity in free field, no load (50 kHz): 0.9 mV/Pa Nominal impedance: 350 Min. terminating impedance: 1 kΩ Pick-up pattern: cardioid Frequency Response: 20 – 16,000 Hz Physical & Dimensions Dimensions: 153 x 60 (length x maximum diameter) mm. Weight: 318g.

Read more less

Experience the unparalleled power and precision of the Electro-Voice ND68 Dynamic Supercardioid Kick Drum Microphone in striking Black. Engineered for perfection, this microphone is a force to be reckoned with in the realm of sound capture.🎤 Excellent Acoustic Isolation: With the ND68, enjoy exceptional acoustic isolation, ensuring that your audio remains crisp and clear in any environment.🎤 Deep Lows and Top-End Punctuation: The large-diaphragm dynamic capsule of the ND68 delivers a rich, detailed frequency response, encompassing deep lows and a sharp top-end punctuation for unparalleled sound quality.🎤 Extreme SPL Handling Capability: From subtle nuances to powerful transients, the ND68 can handle it all with a remarkable SPL handling capability of up to 144 dB SPL, making it ideal for capturing the most dynamic performances.🎤 Reliable Construction: Featuring a humbucking coil to guard against line hum, a Memraflex grille that resists denting, and durable tight-mesh grilles that endure rough treatment, the ND68 is built to last and perform flawlessly in demanding conditions.Elevate your audio game with the Electro-Voice ND68 Dynamic Supercardioid Kick Drum Microphone. From its supercardioid polar pattern providing excellent isolation to its voicing characteristics enhancing every detail of your sound, this microphone is the ultimate choice for capturing the heart-pounding beats of kick drums and low-frequency instruments. Add the ND68 to your arsenal and experience sound like never before.Product Specifications Connector Type: 3-pin XLR Height: 5.63" (143mm) Weight Net: 13.19oz (374g) Shipping Weight: 24.8oz (703g) Family: ND Series Audio Frequency Response: 20 – 11,000 Maximum SPL: > 140dB Polar Pattern: Supercardioid Wired/Wireless: Wired Mic Type: Instrument Diameter (Max): 2.39" (60.8mm) Element: Dynamic Impedance, Low-Z balanced: 150Ω Open Circuit Voltage: 0.8mV/Pascal Case Material: Die cast zinc Finish: Black polyurethane paint Power Requirement: Passive

Read more less

Experience the pinnacle of audio excellence with the Electro-Voice ND66 Cardioid Condenser Instrument Microphone in sleek black. Crafted for discerning musicians and audio professionals, this microphone boasts a premium small-diaphragm condenser element that captures the intricate nuances of percussive and stringed instruments with unparalleled clarity.Delve into a world of pristine sound quality as the self-biased condenser element faithfully reproduces the dynamic nature of sound sources, ensuring every transient detail is conveyed with precision. The clean, crisp, and detailed condenser sound elevates your recordings to new heights, revealing the true essence of your musical performances.Effortlessly achieve optimal microphone placement in any scenario with the ND66's exclusive locking rotating head feature. By simply pushing a button, pivoting the head into position, and releasing the button to secure its placement, you can unleash your creativity without limitations.Equipped with selectable -10 and -20 dB pads, this microphone offers the necessary gain reduction to prevent overload, while the selectable 75 Hz and 150 Hz high-pass filters effectively eliminate unwanted low frequencies from your audio signal. Take control of your sound and unleash your creativity with precision and finesse.Immerse yourself in a world of sonic perfection with the Electro-Voice ND66 Cardioid Condenser Instrument Microphone, where cutting-edge technology meets exceptional craftsmanship to create a truly unmatched audio experience. Elevate your recordings and performances to new heights with this indispensable tool for musicians, producers, and audio enthusiasts alike.Product Specifications Connector Type: 3-pin XLR Height: 5.63" (143mm) Weight Net: 6.31oz (179g) Shipping Weight: 16.4oz (465g) Family: ND Series Finish: Black polyurethane paint Power Requirement: 48 VDC Phantom Audio Frequency Response: 50 – 20,000 Maximum SPL: 146dB Polar Pattern: Cardioid Wired/Wireless: Wired Mic Type: Instrument Diameter (Max): 0.83" (21mm) Element: Condenser Impedance, Low-Z balanced: 200Ω Open Circuit Voltage: 10mV/Pascal Case Material: Die cast zinc

Read more less

Experience unparalleled performance with the Electro-Voice ND46 Dynamic Supercardioid Instrument Microphone in Black. Ideal for capturing a diverse range of instrument sounds, this microphone is engineered to deliver a lively and balanced sound, ensuring your music stands out with clarity and precision in any setting.🎤 Achieve exceptional isolation from surrounding instruments, thanks to the ND46's supercardioid polar pattern, allowing your music to shine without interference.🎤 The large-diaphragm dynamic capsule of the ND46 ensures a rich and detailed frequency response, capturing every nuance of your instrument's sound with remarkable accuracy.🎤 Easily position the microphone exactly where you need it with the locking pivoting head feature, providing effortless mic placement for optimal sound capture in any scenario.🎤 Say goodbye to handling noise interruptions, as the shock-mounted capsule effectively minimises vibrations, ensuring that only the purest sound reaches your audience.🎤 With a humbucking coil that guards against line hum, you can confidently use the ND46 near speaker cabinets and electronic equipment, knowing that unwanted interference is effectively blocked.🎤 The Memraflex grille of the ND46 is designed to resist denting, making this microphone incredibly durable and able to withstand the rigours of live performances.Crafted with precision and durability in mind, the Electro-Voice ND46 Dynamic Supercardioid Instrument Microphone in Black is the perfect choice for musicians and performers seeking top-notch sound quality and reliability. Elevate your music to new heights with the ND46.Product Specifications Connector Type: 3-pin XLR Height: 5.67" (144.1mm) Weight Net: 10.9oz (309g) Shipping Weight: 20.6oz (584g) Family: ND Series Diameter (Max): 2.2" (56mm) Element: Dynamic Impedance, Low-Z balanced: 350Ω Open Circuit Voltage: 2.4mV/Pascal Case Material: Die cast zinc Finish: Black polyurethane paint Power Requirement: Passive Audio Frequency Response: 70 – 18,000 Maximum SPL: > 140dB Polar Pattern: Supercardioid Wired/Wireless: Wired Mic Type: Instrument

Read more less

Experience the pinnacle of precision and power with the Electro-Voice ND44 Dynamic Tight Cardioid Drum/Instrument Microphone in sleek black. Crafted to deliver exceptional performance on drums and rhythm section instruments, this microphone stands out for its superior acoustic control and aggressive sound capture. The large-diaphragm dynamic capsule ensures a detailed frequency response, capturing every nuance of your instrument's performance.With a tight cardioid polar pattern, the ND44 is expertly engineered to isolate your sound from surrounding instruments, focusing solely on the rich and impactful tones you create. Its low-profile pivoting head and DRC-2 drum rim clamp provide effortless mic placement on any drum set configuration, allowing you to achieve optimal sound projection with ease.Equipped with a humbucking coil to guard against line hum, the ND44 lets you perform with confidence near speakers and EMF-generating equipment racks. The durable Memraflex grille resists denting, ensuring longevity even in the face of rough treatment. Whether in the studio or on stage, the Electro-Voice ND44 is your go-to microphone for capturing the dynamic essence of your drumming and instrumentation.Step up your sound game and unleash the full potential of your performances with the Electro-Voice ND44 - where exceptional quality meets unparalleled precision.Product Specifications Connector Type: 3-pin XLR Height: 5.47" (139mm) Weight Net: 6.84oz (194g) Shipping Weight: 17.21oz (488g) Family: ND Series Polar Pattern: Tight Cardioid Wired/Wireless: Wired Mic Type: Instrument Diameter (Max): 1.91" (48.5mm) Element: Dynamic Impedance, Low-Z balanced: 350Ω Open Circuit Voltage: 2.4mV/Pascal Case Material: Die cast zinc handle, ABS polycarbonate head Finish: Black polyurethane paint Power Requirement: Passive Audio Frequency Response: 80 – 16,500 Maximum SPL: > 140dB

Read more less

Experience professional sound quality like never before with the AKG Drumset Session 1 Drum Mic Pack. This comprehensive set includes 5 dynamic and 2 condenser microphones expertly engineered to work together seamlessly, delivering exceptional audio performance.The pack is thoughtfully crafted to cater to all your drum mic needs, making it the ultimate all-in-one solution for capturing the perfect drum sound. Whether you're a seasoned professional or a budding musician, this mic pack offers a remarkable combination of precision and value.Each microphone in this set is meticulously designed with a durable casing, rugged spring steel microphone grills, scratch-resistant finish, and impressive high maximum SPL capabilities. This attention to detail ensures reliability and longevity for all your recording and performance needs.Encompassing a P2 bass drum microphone, 2 P17 condenser microphones for overheads, and 4 P4 microphones for toms and snare, this set provides a versatile array of mics for various applications beyond just drum kits. From miking percussion instruments to amplifying bass and guitar amps, brass, woodwinds, and more, the Drumset Session 1 mic pack covers all your sound amplification requirements.Housed in a robust aluminium carrying case, complete with microphone clamps and stand adapters, this set is well-equipped for both studio and on-the-go use. Elevate your sound game and unleash the true potential of your music with the AKG Drumset Session 1 Drum Mic Pack.Product Specifications P2 General Audio frequency bandwidth: 20 - 16000 Hz Sensitivity: 2.5 mV/Pa Electrical impedance: 400 Ohms Recommended load impedance: 2000 Ohms Polar Pattern: Cardioid Type: Balanced XLR Gender: Male Contacts: 3-pin Body: metal Finish: black Physical & Dimensions Length: 130mm Height: 132mm Diameter: 60mm Weight: 400g P17 General Audio frequency bandwidth: 20 - 20000 Hz Equivalent noise level: 19 dB-A Sensitivity: 15 mV/Pa Signal to Noise: 75 dB-A Preattenuation Pad: -20 dB Electrical impedance: <= 200 Ohms Recommended load impedance: >=1000 Ohms Polar Pattern: Cardioid Voltage: 44 to 52 V Current: <= 3 mA Type: Balanced XLR Gender: Male Contacts: 3-pin Physical & Dimensions Height: 160mm Diameter: 22mm Weight: 130g P4 General Audio frequency bandwidth: 40 - 18000 Hz Sensitivity: 2.5 mV/Pa Electrical impedance: 500 Ohms Recommended load impedance: 2000 Ohms Polar Pattern: Cardioid Body: metal Finish: black Physical & Dimensions Length: 110mm Height: 78mm Diameter: 44mm Weight: 245g

Read more less

Capture the raw essence of every note with the AKG C516ML Clip-on Cardioid Instrument Mic. As part of the esteemed MicroMics family, this professional miniature microphone is meticulously crafted to enhance the audio quality of accordions, pianos, guitar speakers, and keyboard/organ cabinets.🎶 Immerse yourself in crystal-clear sound reproduction with the cardioid polar pattern and high mechanical-noise attenuation of the C516ML. Perfect for miking up a variety of instruments, from guitars to accordions, this mic ensures every nuance of your performance is faithfully captured.🔊 The versatility of the C516ML knows no bounds, thanks to its detachable microphone cable and wireless direct adapter for seamless integration with AKG pocket transmitters. Say goodbye to tangled cables and hello to hassle-free setups.⚙️ With a robust metal body and matte black finish, the C516ML exudes durability and sophistication. Its compact design, complete with a miniature mounting bracket, provides easy installation on instruments or amplifiers. 🔍 Dive into the technical prowess of the C516ML with specifications that boast an audio frequency bandwidth of 60 - 20000 Hz, sensitivity of 5 mV/Pa, and an equivalent noise level of 31 dB-A. This mic is a powerhouse, delivering exceptional performance with every use.📐 Enhance your sound setup with the AKG C516ML Clip-on Cardioid Instrument Mic - where precision meets perfection in every performance.Product Specifications General Audio frequency bandwidth: 60 - 20000 Hz Equivalent noise level: 31 dB-A Sensitivity: 5 mV/Pa Signal to Noise: 63 dB-A Electrical impedance: 200 Ohms Recommended load impedance: 2000 Ohms Polar Pattern: Cardioid Type: Mini XLR Gender: Female Contacts: 3-pin Body: metal Finish: matte black Voltage: 2 to 12 V Current: 2 mA Physical & Dimensions Width: 47mm Height: 235mm Weight: 46g

Read more less

Experience the power and precision of the AKG D112MKII Large Diaphragm Bass Drum/Instrument Mic, the industry benchmark for bass drum microphones. Unleash a unique, punchy sound with the bass resonance volume chamber and dynamic microphone technology that delivers accurate low frequencies with unparalleled clarity. With its integrated flexible mount, this microphone epitomises versatility, allowing you to capture the perfect sound effortlessly. Renowned for its high SPL capability and bulletproof construction, the D112MKII can handle over 160 dB SPL without distortion, ensuring your performance is crystal clear even in the most intense environments. Perfect for bass drums, electric bass cabinets, and trombones, this microphone's authoritative low end and narrow-band presence boost at 4 kHz guarantee that your sound cuts through any mix with forceful impact. The integrated hum-compensation coil ensures minimal noise interference, providing you with a pure and undisturbed audio experience.Whether you're on stage or in the studio, the AKG D112MKII requires no additional EQ to sound stellar – simply plug in and experience professional-grade sound quality instantly. Elevate your sound to new heights with the AKG D112MKII – the go-to choice for musicians and sound engineers who demand excellence.Product Specifications General Audio frequency bandwidth: 20 - 17000 Hz Sensitivity: 1.8 mV/Pa Electrical impedance: 210 Ohms Recommended load impedance: 2000 Ohms Polar Pattern: Cardioid Pro Studio: Yes Project Studio: Yes Live Instrument: Yes Type: Balanced XLR Gender: Male Contacts: 3-pin Physical & Dimensions Length: 115mm Height: 126mm Diameter: 70mm Weight: 300g

Read more less

Enhance every beat with the Audix DP7 Mic Drum Pack Inc Case. This professional drum microphone pack is the ultimate all-in-one solution for drum miking, meticulously designed to meet the exacting requirements of today's top drummers, whether performing on a stage or recording in a studio.🎤 The DP7 Drum Pack includes a powerhouse combination of seven top-quality microphones. The flagship D6 kick drum microphone delivers powerful low-end punch, while the two dynamic D2 microphones are perfect for capturing the nuances of rack toms. The D4 microphone is ideal for the resonant tones of floor toms, and the i5 microphone ensures crisp snare articulation. To capture the rich ambience of the drum kit, two ADX51 studio condenser microphones are included for overhead miking.🎤 With Dflex clips for easy and precise microphone positioning, achieving the perfect drum sound has never been simpler. The pack also features four D-Vice rim mount clips for the snare and tom microphones, along with three heavy-duty tension fit microphone clips for the other three microphones. All these premium components are elegantly housed in a foam-lined aluminium road case for safe storage and convenient transport.🎤 Immerse yourself in the rugged Audix quality that has become synonymous with exceptional sound reproduction. Each microphone in the DP7 Drum Pack boasts unique specifications, ensuring optimal performance across the frequency range and capturing the dynamics of every drum hit with unparalleled clarity and accuracy.Elevate your drumming experience with the Audix DP7 Mic Drum Pack Inc Case – the quintessential choice for professional drummers seeking perfection in both live and studio settings.Product Specifications General i5 Transducer: Dynamic VLM Type B Frequency Response: 50 Hz - 16 kHz Polar Pattern: Cardioid Output Impedance: 150 ohms Sensitivity: 1.5 mV / Pa @ 1k Maximum SPL: ≥140 dB Off-axis rejection: ≥23 dB Power Requirements: None D2 Transducer: Dynamic VLM Type B Frequency Response: 68 Hz - 18 kHz Polar Pattern: Hypercardioid Output Impedance: 280 ohms Sensitivity: 1.2 mV / Pa @ 1k Maximum SPL: ≥144 dB Off -axis rejection: ≥30 dB Power Requirements: None D4 Transducer: Dynamic VLM Type D Frequency Response: 40 Hz - 18 kHz Polar Pattern: Hypercardioid Output Impedance: 280 ohms Sensitivity: 1.4 mV / Pa @ 1k Maximum SPL: ≥144 dB Off -axis rejection: ≥20 dB Power Requirements: None D6 Transducer: Dynamic VLM Type B Frequency Response: 30 Hz - 15 kHz Polar Pattern: Cardioid Output Impedance: 280 ohms Sensitivity: 0.8 mV / Pa @ 1k Maximum SPL: ≥144 dB Off -axis rejection: ≥20 dB Power Requirements: None

Read more less