Description
Experience unparalleled audio performance with the TASCAM SERIES 102i USB Audio/MIDI Interface with DSP Mixer. This compact yet powerful interface is a must-have for guitarists, songwriters, and small studio owners seeking professional-grade recording capabilities.
Featuring up to ten audio inputs and two audio outputs, the SERIES 102i delivers crystal-clear audio resolution of up to 192 kHz / 24 bit, ensuring every nuance of your music is captured with exceptional clarity. The high-grade Ultra-HDDA microphone pre-amps with ultra-low noise (EIN: –127 dBu) guarantee pristine sound quality, while the high-quality audio input circuits minimise background noise for a truly professional recording experience.
The innovative DSP mixer with built-in digital reverb, compressor, phase invert, and four-band EQ for each channel allows for precise control over your sound, giving you the ability to sculpt your audio to perfection. This powerful onboard processor eliminates latency issues and lightens the load on your computer, ensuring efficient audio processing.
Equipped with individually switchable 48-Volt phantom power on XLR inputs and the flexibility to switch TRS inputs to instrument-level for direct guitar or bass recording, the SERIES 102i offers versatility to cater to a variety of recording needs. Gain controls, signal indicators, and peak indicators on each analogue input further enhance your control over the recording process, allowing you to fine-tune your sound effortlessly.
Perfect for bringing your musical ideas to life with uncompromising quality, the TASCAM SERIES 102i sets a new standard for audio interfaces. Elevate your recording experience and unleash your creativity with this cutting-edge USB interface.
Product Specifications
General ratings
- Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
- Quantization bit depth: 16/24-bit
Analogue audio inputs
- Mic inputs (when the input switch set to MIC/LINE): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
- Input impedance: 1.5 kΩ
- Nominal input level:
- −64 dBu (0.0005 Vrms, GAIN knob at MAX)
- −6 dBu (0.388 Vrms, GAIN knob at MIN)
- Maximum input level: +10 dBu (2.45 Vrms)
- Maximum gain: 58 dB
- Instrument inputs (when the input switch is set to INST): 6.3-mm standard TS jack (Tip: HOT, Sleeve: GND)
- Input impedance: ≥1 MΩ
- Nominal input level:
- −64 dBV (0.0006 Vrms, GAIN knob at MAX)
- −6 dBV (0.501 Vrms, GAIN knob at MIN)
- Maximum input level: +10 dBV (3.162 Vrms)
- Maximum gain: 58 dB
- Line inputs (when the input switch set to MIC/LINE): 6.3-mm TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input impedance: 10 kΩ
- Nominal input level:
- −54 dBu (0.0015 Vrms, GAIN knob at MAX)
- +4 dBu (1.228 Vrms, GAIN knob at MIN)
- Maximum input level: +24 dBu (12.282 Vrms)
- Maximum gain: 58 dB
Analogue audio outputs
- Line outputs (balanced): 6.3-mm TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Output impedance: 230 Ω
- Nominal output level: +4 dBu (1.228 Vrms)
- Maximum output level: +20 dBu (7.75 Vrms)
- Headphone outputs (PHONES): Standard 6.3-mm stereo jack
- Maximum output power (THD+N ≤0,1 %, 32 Ω): 18 mW + 18 mW
Digital audio inputs/outputs
- OPTICAL IN (S/MUX) connector(s): Optical (JEITA RC-5720C)
- Signal format:
- Multi-channel optical format
- (Supports S/MUX when 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz.)
Other inputs and outputs
- USB: 4-pin USB B-type
- Transfer rate: USB 2.0 Hi-speed (480 MBit/s)
- MIDI input: 5-pin DIN
- Format: Standard MIDI format
- MIDI output: 5-pin DIN
Audio performance
- Mic amp EIN (equivalent input noise): ≤−129 dBu
- Frequency response (mic/line input to computer):
- At 44.1/48 kHz: 20 Hz – 20 kHz, +0/–0.4 dB (JEITA)
- At 88.2/96 kHz: 20 Hz – 40 kHz, +0/–0.8 dB (JEITA)
- At 176.4/192 kHz: 20 Hz – 80 kHz (JEITA)
- S/N ratio: 109 dB
- (Mic input to Computer, Gain knob at minimum, 20-kHz low-pass filter, A-weighted)
- 110 dB
- (Computer to Line output, MONITOR knob at maximum, 20-kHz low-pass filter, A-weighted)
- Distortion (THD + N): 0,0016 %
- (Mic input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter)
- 0,0023 %
- (Line input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter)
- 0,0014 %
- (Computer to Line output, 1 kHz sine wave, MONITOR knob at maximum, 20-kHz low-pass filter)
- Crosstalk: ≥100 dB
- (MIC/LINE input to LINE output 1-2, 1 kHz sine wave, gain knob at minimum)
Computer system requirements
- Windows:
- Computer hardware requirements: Windows computer with a USB port that supports at least USB 2.0 or USB 3.0
- CPU/processor speed: 2 GHz or faster dual core processor (x86)
- Memory: 2 GB or more
- Mac:
- Computer hardware requirements: Mac with a USB port that supports at least USB 2.0 or USB 3.0
- CPU/processor speed: 2 GHz or faster dual core processor
- Memory: 2 GB or more
- iOS device: Apple iOS device running iOS 10 or later
- Supported audio drivers:
- Windows: USB Audio Class 2.0, ASIO 2.2, WDM (MME), MIDI
- Mac: Core Audio, Core MIDI
- iOS device: Core Audio for iPhone
Power supply and other specifications
- Power: DC 12 V AC adapter (PS-P1220E)
- Power consumption: 7.2 W
- Dimensions (W × H × D): 186 mm × 65 mm × 160 mm
- Weight: 1.1 kg
- Permissible operating temperature range: 5–35 °C
Delivery: 2-3 working days
