Sound Processors

Experience unparalleled audio quality and flexibility with the Yamaha RIO1608D2 Dante Network Rack. Boasting a sleek design and cutting-edge features, this rack is a must-have for professional audio setups. The long-distance Dante network capability allows for seamless audio transmission, while the intuitive display and encoder enhance visibility and operability.Thanks to the remotely controllable internal head amplifiers and gain compensation function, you have precise control over your audio levels. The inclusion of two internal power supply units ensures uninterrupted performance, making this rack ideal for critical applications where reliability is paramount.The Yamaha RIO1608D2 is part of the R Series I/O racks, which utilise the Dante network audio protocol for unmatched flexibility and ease of setup. Whether you are enhancing your mixing console's sonic potential or integrating various system components, this rack delivers natural, musical sound quality.With redundancy options for ultimate reliability, this 3U rack features 16 inputs and 8 outputs, catering to a wide range of I/O requirements. Experience low signal delay, minimal distortion, and exceptional dynamic range, all contributing to a flawless audio experience.Invest in the Yamaha RIO1608D2 Dante Network Rack and elevate your audio setup to new heights. Experience pristine sound reproduction, seamless connectivity, and unmatched reliability for all your professional audio needs. Opt for excellence with Yamaha.Product Specifications General Sampling frequency rate External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% Signal delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz Dynamic range: 108dB typ., INPUT to OUTPUT, Input Gain = Min Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu Residual output noise, ST master off Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz Power consumption: 70W Physical & Dimensions Height: 144mm Width: 480mm Depth: 361.5mm Weight: 8.8kg

Read more less

Experience the pinnacle of audio excellence with the Yamaha RIO3224D2 Dante Network Rack. Engineered with precision and expertise, this high-performance I/O Rack unit seamlessly integrates with the Yamaha digital mixing consoles to elevate your sound production to unprecedented levels of clarity and purity. Embrace the cutting-edge Dante network protocol, offering unparalleled flexibility in system setup and configuration. With dual power supply units ensuring maximum reliability by minimising the risk of power loss, and a revamped internal airflow system reducing fan noise to a whisper, the RIO3224D2 is designed for seamless, uninterrupted performance every time.Revolutionise your audio editing capabilities as you directly adjust gain, high-pass filters, and phantom power settings from the I/O Rack interface, all while enjoying the convenience of remote operation via the R Remote software. The Gain Compensation function ensures optimal sound balance, delivering a harmonious and polished audio experience that exceeds expectations.Whether you are a seasoned professional in need of exceptional sonic transparency or an aspiring audio enthusiast aiming for unparalleled quality, the Yamaha RIO3224D2 Dante Network Rack stands as a testament to Yamaha's commitment to delivering the purest and most natural sound. Elevate your audio engineering game and embrace the future of sound technology with the Yamaha RIO3224D2.Product Specifications General Sampling frequency rate External: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm) Signal delay: Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec Total harmonic distortion: Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min. Frequency response: +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz Dynamic range: 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain= Max. Residual output noise: –88 dBu, ST master off Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz Power requirements: 100-240V, 50/60Hz Power consumption: 120W Physical & Dimensions Height: 220mm Width: 480mm Depth: 368mm Weight: 13.5kg

Read more less

Experience the pinnacle of professional audio connectivity with the Yamaha TIO1608-D2 16 In x 8 Out Dante Ready Rack Mount Stagebox 96KHz. 🎤Enhance your audio setup with this Dante-compatible I/O rack, boasting 16 mic/line inputs and 8 line outputs for seamless integration into your existing setup. Perfect for use with TF Series or DM3 consoles, the TIO1608-D2 offers remote gain control, allowing you to effortlessly fine-tune your sound from a distance.With support for 96kHz sampling frequency, this stagebox delivers high-definition audio quality, making it ideal for large installations such as the RIVAGE PM or DME7 systems. The versatility and scalability of Dante protocol ensure compatibility with a range of Yamaha mixers, allowing you to customise your audio system to suit your specific needs.Thanks to the user-friendly configuration and flexibility of input selection, setting up your stagebox has never been easier. The TIO1608-D2's recallable D-PRE preamplifiers deliver crystal-clear sound every time, ensuring a professional audio experience for your audience.Unlock the full potential of your audio system with the Yamaha TIO1608-D2 - the ultimate choice for musicians, sound engineers, and audio enthusiasts looking to elevate their sound to new heights.Product Specifications Sampling frequency rate: External: 44.1kHz, 48kHz, 88.2kHz, 96kHz Signal delay: Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Total harmonic distortion: Less than 0.2% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600Ω, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600Ω, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz Frequency response: +0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT Dynamic range: 108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz Hum & noise level: Equivalent input noise -128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter Residual output noise: -86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter Crosstalk: -100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz Heat dissipation: 100-240V, 50/60Hz, 43.5kcal/h Power requirements : 100-240V, 50/60Hz Power consumption: 50W Dimensions: W: 480mm (18.9”) H : 88mm (3.5”) D: 364mm (14.4”) Net weight: 5.7kg (12.6lbs) Accessories: Owner’s Manual, Power Cord (2.5m), Rubber stoppers (4) Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ Analog Output Characteristics Output Terminal: OUTPUT 1-8 Actual Source Impedance: 75 Ohms For use With Nominal: 600 Ohms Lines Output Level: Nominal: +4 dBu (1.23V) Max. before clip: +24 dBu (12.3V) Connector: XLR-3-32 type *1 Balanced/unbalanced: Balanced Analog Input Characteristics Input Terminals: INPUT 1-16 GAIN: +66 Db -6 Db Actual Load Impedance: 7.5kOhms For Use with Nominal: 50-600 Ohms Mics & 600 Ohms lines Input Level: Sensitivity: -82 dBu (61.6μV) +10 dBu (245Mv) Nominal: -62 dBu (0.616mV) +10 dBu (2.45V) Max before clip: -42 dBu (6.16mV) +30 dBu (24.5V) Connector: Combo Jack (XLR-3-31 type *2 or TRS phone *3) Balanced/Unbalanced: Balanced Digital Input and Output Characteristics Terminal: Primary/Secondary Format: Dante Data Length: 24bit or 32bit Level: 1000Base-T Audio: 16ch (Tio1608-D2 to other devises) 8ch (Other devises to Tio1608-D2) Connector: etherCON Cat5e

Read more less

Experience seamless sound transmission and unparalleled flexibility with the Yamaha TIO1608-D 16 In x 8 Out Dante Ready Rack Mount Stagebox 48KHz. Elevate your audio setup with this cutting-edge digital stagebox system, meticulously designed for discerning professionals seeking top-tier performance.Key Features:- **Premium Sound Quality**: Equipped with 16 microphone/ line inputs and 8 line outputs, the TIO1608-D boasts top-of-the-line D-PRE microphone preamplifiers from the acclaimed TF series, ensuring pristine, natural sound reproduction.- **Effortless Integration**: Fully Dante equipped, the TIO1608-D seamlessly interfaces with TF series consoles, allowing for a quick and straightforward setup process. Expand your TF digital mixer system with ease, accommodating up to 40 channel inputs and 24 channel outputs.- **Enhanced Connectivity**: With the option to add up to 3 units using the NY64D expansion card, users can amplify their input/output capabilities without compromising on sound quality. Harness the power of lightweight CAT5e Ethernet cables for low-latency, high-fidelity audio transmission.- **Reliability in Performance**: Leveraging the Dante network audio protocol, the TIO1608-D guarantees high sampling accuracy, low latency, and minimal jitter, ensuring a rock-solid performance every time.- **User-Friendly Configuration**: Activate the QUICK CONFIG mode to streamline the setup process by automatically adjusting network settings and audio patching, allowing for a hassle-free configuration experience.Embrace innovation and precision-engineering with the Yamaha TIO1608-D. Whether you're a seasoned audio professional or a passionate enthusiast, this Dante-ready rack mount stagebox is your gateway to a world of unparalleled sound clarity and performance. Elevate your audio game today with Yamaha.Product Specifications General Sampling frequency rate - External: 44.1kHz or 48kHz Total harmonic distortion: Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz Frequency Response: +0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz Dynamic Range: 108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz Heat dissipation: 100-240V, 50/60Hz, 43.5kcal/h Power requirements: 100-240V, 50/60Hz Power consumption: 50W Hum & Noise Level Equivalent input noise: -128dBu, Gain=+66dB *Measured with A-weighting filter Residual output noise: -88dBu, ST master off *Measured with A-weighting filter Physical & Dimensions W: 480mm (18-7/8") H: 88mm (3-4/8") D: 364mm (14-3/8") Net weight: 5.7kg (12.6lbs) Others: Temperature Range: Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C

Read more less