Power Amplifiers

Elevate your audio experience with the RCF IPS3700 2-Channel Class H Power Amplifier. Delivering an impressive 1500W RMS per channel at 4 ohms, this powerhouse amplifier ensures robust and clear sound performance for your audio setup. With versatile configuration options, easily switch between stereo, mono, and bridge modes to meet different audio requirements, providing flexibility in how you use the amplifier for various setups.Experience professional-grade audio amplification with the RCF IPS3700's extensive protective circuits, signal/clip/protect LED indicators, and protection against shorts and open circuits. This amplifier offers high reliability and operational safety, ensuring peace of mind during use. Whether you are setting up a live performance, a recording studio, or a sound reinforcement system, the IPS3700 adapts seamlessly to your needs.Don't settle for anything less than exceptional sound quality and durability. Enhance your sound system with the RCF IPS3700 2-Channel Class H Power Amplifier and enjoy crystal-clear sound reproduction, knowing your equipment is safeguarded.Specifications:- Power Output: 1500W RMS per channel @ 4 ohms- Configuration Options: Stereo, mono, bridge modes- Protective Circuits: Extensive protection against shorts and open circuits- Indicators: Signal/clip/protect LED indicatorsProduct Specifications General Amplifier Specifications Power output stereo 4Ω:1500 W rms Power output stereo 8Ω:1200 W rms Power output bridged 8Ω:3000 W rms Frequency Response -3 dB:20 Hz ÷ 20 kHz Signal/noise rate:100 dB Crosstalk:-75 dB Damping factor:> 200 Slew rate:10V/μS Input Section Input connector:xlr Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS Input impedance:20 kΩ (balanced), 10 kΩ (unbalanced) kΩ Output Section Output connector:Speakon System Parameters Cooling:Forced Protections:DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current Amplifier class:H Power Requirements Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz Power consumption:800 W Physical & Dimensions Height: 88mm Width: 482mm Depth: 255mm Weight: 16.6kg

Read more less

Immerse yourself in the world of professional audio amplification with the RCF IPS 1.5K 2-Channel Power Amplifier. Delivering 2 x 750 Watts at 4 Ohms impedance, this top-of-the-line amplifier ensures powerful and crystal-clear sound performance for live performances or studio recordings. Thanks to its Class-H power amplification technology, this amplifier guarantees fast response, low distortion, and versatile operation modes including stereo, parallel, and bridge. The IPS 1.5K is further equipped with an extensive protection circuit, variable speed cooling system, and signal, clip, and fault LED indicators to ensure reliable and safe operation under various conditions. Elevate your sound quality, enhance your performance, and unleash the full potential of your audio system with the exceptional features and performance capabilities of the RCF IPS 1.5K 2-Channel Power Amplifier.Specifications:- Power Output: 2 x 750 Watts @ 4 Ohms impedance- Technology: Class-H power amplification- Operation Modes: Stereo, Parallel, Bridge- Protection: Extensive protection circuit- Cooling System: Variable speed cooling- Indicators: Signal, Clip, Fault LED indicatorsProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 750 W @ 4 ohm 2 x 500 W @ 8 ohm 1 x 1500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <73 dB Distortion (THD+N) @ 1 kHz nominal power: <0.02 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 600 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 264 mm / 10.39 inches Weight: 10.5 kg / 23.15 lbs

Read more less

Step into the realm of professional audio amplification with the RCF IPS 2.5K 2-Channel Power Amplifier. Boasting a formidable 2 x 1250 Watts of power output at 4 Ohms impedance, this amplifier is a powerhouse designed to elevate your sound experience to new heights. Equipped with cutting-edge Class-H power technology, this amp ensures fast response and minimal distortion, delivering crisp and clear audio across a wide frequency range. Whether you prefer stereo, parallel, or bridge mode, the IPS 2.5K offers flexibility in connectivity to suit your setup preferences. Safety and reliability are at the core of the IPS 2.5K design, with an extensive protection circuit safeguarding your equipment from potential damage. The variable speed cooling system, along with signal/clip/fault LED indicators, provides peace of mind while ensuring optimal performance even during prolonged use. Elevate your audio setup and immerse yourself in crystal-clear sound with this professional-grade amplifier designed for modern audio environments.Specifications:- Power Output: 2 x 1250 Watts @ 4 Ohms- Amplifier Type: Class-H- Impedance: 4 Ohms- Connectivity Modes: Stereo, Parallel, Bridge- Protection Circuitry: Yes- Cooling System: Variable Speed- LED Indicators: Signal/Clip/FaultProduct Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 1250 W @ 4 ohm 2 x 800 W @ 8 ohm 1 x 2500 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <80 dB Distortion (THD+N) @ 1 kHz nominal power: <0.01 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 11.2 kg / 24.69 lbs

Read more less

Step into the realm of professional audio excellence with the RCF IPS 5.0K 2-Channel Power Amplifier. Delivering a potent 2 x 2600W Class-H power output at 4 ohms, this amplifier is engineered to provide exceptional sound quality with rapid response and minimal distortion. Designed for professional audio setups, the RCF IPS 5.0K excels in versatility and reliability, offering stereo, parallel, and bridge modes to accommodate various audio needs. Safety is a top priority with this amplifier, featuring an elaborate protection circuitry that safeguards against short circuits, thermal issues, and DC faults. Each channel of the amplifier is equipped with a limiter, providing precise control over the audio output. The variable speed cooling system, in conjunction with high-efficiency heat sinks and fans, ensures optimal performance even in challenging thermal conditions. Key Specifications:- Power Output: 2 x 2600W @ 4Ω- Class: Class-H- Modes: Stereo, Parallel, Bridge- Protection Circuitry: Short Circuit, Thermal, DC Protections- Cooling System: Variable Speed Cooling System- Connectors: Stereo XLR Input and Output, speakON, Binding Post Output- Indicators: Signal/Clip and Fault LED IndicatorsElevate your audio setup with the RCF IPS 5.0K 2-Channel Power Amplifier and experience unparalleled power, versatility, and reliability in every performance.Product Specifications Amplifier specifications Amplifier Class: H Output power: 2 x 2600 W @ 4 ohm 2 x 1500 W @ 8 ohm 1 x 5200 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 22000 Hz Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.04 % Input section Total number of inputs: 2 Balanced: 2 Mono: 2 Line inputs: 2 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Binding Post, Speakon Configuration and control Configuration: DIP switch, Front panel Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1800 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 482 mm / 18.98 inches Depth: 325 mm / 12.8 inches Weight: 21.6 kg / 47.62 lbs

Read more less

Elevate your audio experience with the RCF QPS 10K 4-Channel Class HD Power Amplifier. This professional amplifier delivers an impressive 4 x 2,500 W of power at 2 Ohms, ensuring a powerful and high-quality sound output. With a design focused on safety and longevity, the QPS 10K features comprehensive protection circuits against shorts, open circuits, and thermal issues. Its variable speed cooling system, alongside high-efficiency heat sinks and fans, guarantees reliability even in challenging environments. Versatile and precise, this amplifier offers independent gain control, signal/clip and fault indicators, and XLR output links for channels A and C, providing you with full control over your audio output. Choose from stereo, parallel, and bridge modes to suit various setups and requirements. Invest in the RCF QPS 10K for cutting-edge power amplification technologies, reliability, and superior sound quality.Important specifications:- Power: 4 x 2,500 W @ 2 Ohms- Protection circuits: Shorts, open circuits, thermal issues- Cooling system: Variable speed with high-efficiency heat sinks and fans- Operation modes: Stereo, parallel, bridgeProduct Specifications Amplifier specifications Amplifier Class: HD Output power: 4 x 2500 W @ 2 ohm 4 x 2200 W @ 4 ohm 4 x 1400 W @ 8 ohm 2 x 5000 W @ 4 ohm (bridge) 2 x 4400 W @ 8 ohm (bridge) Frequency Response (-3dB): 20 Hz ÷ 20000 Hz SNR Analog inputs (“A” weighted): >110 dB Crosstalk: <70 dB Distortion (THD+N) @ 1 kHz nominal power: <0.05 % Input section Total number of inputs: 4 Balanced: 4 Mono: 4 Line inputs: 4 Line connectors: XLR Output section Signal output number: 2 Signal output connectors: XLR Power output connectors: Speakon Protections Cooling: Forced Short circuit: Yes Thermal: Yes DC: Yes Fuses: Yes VHF (Very High Frequencies): Yes Power requirement Operating voltage: 220-240/115 V~ 50/60Hz Power consumption: 1900 W Physical & Dimensions Standard compliance Safety agency: CE compliant Cabinet/Case Material: Metal Handles: Metal handles included in the front panel Colour: Black - RAL 9005 Rack mounting: 19", 2U Height: 88 mm / 3.46 inches Width: 483 mm / 19.02 inches Depth: 399 mm / 15.71 inches Weight: 14.2 kg / 31.31 lbs

Read more less