Power Amplifiers

Elevate your audio experience to new heights with the NEXO DTDAMP4X1.3C 4Ch Power Amp. Designed as the optimal companion for NEXO speakers backed by the DTD Controller, this power amplifier delivers a robust and crystal-clear sound performance. Featuring 4 channels capable of providing 4x1250W at 4Ω, this amplifier ensures a powerful audio output for your setup. The NEXO DTDAMP4X1.3C offers versatile bridging options allowing channels to be independently bridged two by two, providing flexibility in configuring your audio system. It boasts an ultra-efficient Switch Mode power supply and amplifier channel design for superior performance. The extensive protection features safeguard your equipment against mains over/undervoltage, temperature fluctuations, and DC outputs, ensuring the longevity and safety of your audio system. Ideal for powering mobile setups or fixed installations of NEXO ID and PS Series systems, the NEXO DTDAMP4X1.3C is available in two models: one delivering 4 x 700 Watts and another providing 4 x 1300 Watts at 4 Ohms. Specifications:- Channels: 4- Power Output: 4x1250W @ 4Ω- Bridging Options: Independent bridging two by two- Protection Features: Comprehensive protection against mains over/undervoltage, temperature fluctuations, and DC outputs- Power Supply: Switch Mode- Amplifier Channel Design: High-efficiency designProduct Specifications Power Number of channels:4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 135 Volts Max. output power (4 x 8 Ohms): 4 x 750 Watts Max. output power (4 x 4 Ohms): 4 x 1300 Watts Max. output power (2 bridge x 8 Ohms): 2 x 2600 Watts Audio Characteristics Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +8 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Back Panel Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Front Panel Features Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains Requirements Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 900 Watts Power consumption 1/4 max. / 4 Ohms: 1800 Watts Physical Specifications Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Operating temperature range: 0°C - 45 °C Certifications CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC Ordering Information Pre-configured for 230 volts mains: DTDAMP4x1.3C Pre-configured for 120 volts mains: DTDAMP4x1.3U

Read more less

Elevate your audio setup to new heights with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier. Tailored as the ultimate companion for NEXO speakers with DTD Controller support, this 4-channel amplifier is a game-changer for professional audio environments. Boasting a high-efficiency Switch Mode power supply and Amplifier channel design, the DTDAMP4X0.7C ensures unmatched sound quality and reliability for your performances. With comprehensive protection features such as mains over/undervoltage, temperature monitoring, and DC outputs protection, this amplifier offers peace of mind during every use. Despite its powerful capabilities, this lightweight and compact 1U rack unit weighing only 7.5 Kg is perfect for mobile setups. The variable-speed cooling system guarantees quiet operation while enhancing performance. Simplify your setup, unleash your NEXO speakers' full potential, and experience a new level of audio precision with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier.Specifications:- Power: 4x700W @ 4Ω- Weight: 7.5 Kg- Size: 1U RackProduct Specifications General Number of channels: 4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 85 Volts Max. output power (4 x 8 Ohms): 4 x 360 Watts Max. output power (4 x 4 Ohms): 4 x 700 Watts Max. output power (2 bridge x 8 Ohms): 2 x 1400 watts Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +5 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 580 Watts Power consumption 1/4 max. / 4 Ohms: 1100 Watts Physical Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Other Operating temperature range: 0°C - 45 °C CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC

Read more less

Experience unparalleled sound quality with the NEXO NXAMP4X4C MK2 4Ch Power Amp and Controller. Developed through the exceptional collaboration between NEXO and Yamaha, this state-of-the-art device brings a revolution in audio performance. Delivering a robust 4 x 4500 Watts output, this 4U unit features advanced signal processing and ultra-low distortion Class D amplifiers, ensuring an exceptional auditory experience. The large colour touchscreen on the front panel provides easy access to all essential parameters, making setup effortless. Whether for fixed installations or touring, this powered controller offers flexibility, convenience, efficiency. Elevate your sound system to new heights with the NEXO NXAMP4X4C MK2, providing remarkable clarity and detail in sound reproduction. With 24-bit/96KHz converters and 64-bit signal processing, enjoy articulate and rich performance from solid bass to impressive high-end definition. Even at low volumes, the sound remains transparent and pure, enhancing the audience experience. Specifications:- Power output: 4 x 4500 Watts- Signal Processing: 64-bit- Converters: 24-bit/96KHz- Amplifier Type: Class D- Touchscreen: Large Colour Touchscreen- Unit Size: 4UProduct Specifications Power Specifications Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 180 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 3300 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 4500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 6600 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 9000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 18 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Latency: 580 us on a flat setup Audio AD and DA converters: 24-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs

Read more less

Experience the pinnacle of sound quality with the NEXO NXAMP4X2MK2 4Ch Power Amp Controller. This powerhouse of a power amp controller is a collaborative creation between NEXO and Yamaha, designed to ensure top-notch sound quality for NEXO loudspeaker systems. Boasting cutting-edge technology, this controller features 4 ultra-low distortion Class D amplifiers, each delivering a whopping 2500 Watts of power, setting a new standard in sound reinforcement.The user-friendly interface of the NEXO NXAMP4X2MK2, with all essential parameters easily accessible via a large colour touchscreen on the front panel, provides a seamless setup experience for both fixed installations and touring. Elevate your sound system with this power amp controller and immerse your audience in a whole new level of audio excellence.Key Specifications:- Brand: NEXO- Power: 4x2500W- Amplifier Type: Class D- Interface: Colour touchscreen- Application: Fixed installations, touringProduct Specifications Power Specifications: Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 140 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1200 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 2500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 3800 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 5000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 16 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Lantency: 550 us on a flat setup Audio AD and DA converters: 32-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs Back Panel features: Analogue audio inputs: 4x balanced analogue inputs on XLR3 Power outputs: 4×Neutrik Speakon NL-4 outputs RS232 port: 1×DB-9 connector dedicated for DPU connection GPIO port: 1ｘDB-25 connector with 5x Inputs and 8x Outputs for DMU connection Expansion slot: For networking and digital audio cards, 4x digital audio inputs and remote control Main sockets: 1x Neutrik Powercon NAC3 (1x 20 A) User interface and controls: Front panel buttons and knobs: Rotary encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGZ, 480 x 272 Main requirements: Mains voltage: Universal power supply with active PFC 100-240 Volts (50/60 Hz) Mains voltage: Power consumption（1/4 max 2 Ω）: 3500 W Dimensions and Certifications: Dimensions: 2U 19" rack, 502mm / 20" depth, 16.1 kg / 35.3 lbs weight Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Elevate your audio experience with the NEXO NXAMP4X1MK2 4Ch Power Amp Controller 4x1300W 2U. This powerhouse amplifier boasts cutting-edge features that deliver unparalleled sound quality and precise control. The advanced Array-EQ User EQ allows for up to 8 bands per channel, ensuring a tailored sound experience with every note heard exactly as intended. Equipped with ultra-low distortion Class D amplifiers and 32-bit/96KHz converters, this amplifier produces crystal-clear sound reproduction with solid bass and impressive high-end definition. With two layers of mute options, Voltage and Protection Meters, and seamless integration with three new multi-core DSPs, fine-tuning your audio setup has never been easier. Future-proofed hardware ensures potential firmware updates and continuous relevance over the years. Take your sound system to the next level with the NEXO NXAMP4X1MK2 Power Amp Controller.Specifications:- Power: 4x1300W- Amplifier Type: Class D- Number of Channels: 4- EQ Bands per Channel: Up to 8- Converters: 32-bit/96KHz- Signal Processing: 64-bit- Interface: Remote Control- Connectivity: Versatile OptionsProduct Specifications Power Specifications Number of amplifiers channels: 4 x amplifiers channels, 2 by 2 bridgeable Max. output voltage (no load): 4 x 105 Volts 4 x 140 Volts Max. output power (4 channels mode/8 Ohms load per channel): 4 x 600 Watts 4 x 1200 Watts Max. output power (4 channels mode/4 Ohms load per channel): 4 x 900 Watts 4 x 1900 Watts Max. output power (4 channels mode/2 Ohms load per channel): 4 x 1300 Watts 4 x 2500 Watts Max. output power (2 channels mode/8 Ohms load per channel): 2 x 1800 Watts 2 x 3800 Watts Max. output power (2 channels mode/4 Ohms load per channel): 2 x 2600 Watts 2 x 5000 Watts Power consumption (Standby): 10 Watts Power consumption (Idle): 200 Watts Input to Power Out Frequency response: +/-0.5 dB from 10 Hz to 20 KHz Input Impedance / Max. level: 22 K Ω / +25 dBu Dynamic Range / TDH + N: 107 dB unweighted / Typical 0.1% on a flat setup Latency: 550 us on a flat setup Audio AD and DA Converters: 32 bits @ 96 KHz Processing: 3 x multicore 64 bits processing DSPs Back Panel Features Analogue audio inputs: 4 x balanced analogue inputs on XLR3 Power outputs: 4 x Neutrik Speakon NL-4 outputs RS232 port: 1 x DB-9 connector dedicated for DPU connection GPIO port: 1 x DB-25 connector with 5 x inputs and 8 x outputs or for DMU connection Expansion slot: For networking and digital audio cards, 4 x digital audio inputs and remote control Mains sockets: 1 x Neutrik Powercon NAC3 (1 x 20 A) User Interface And Controls Front panel buttons and knobs: Rotary Encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGA, 480 x 272 Mains Requirements Mains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50/60/Hz) Power consumption 1/4 max. 2 Ohms: 1900 Watts 3500 Watts Physical & Dimensions Height: 2U 19" Rack Depth: 506 mm Weight: 15.7 Kg Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less