Power Amplifiers

Experience unparalleled audio performance and reliability with the Electro-Voice PA2400T 2 Channel 100V Line Amplifier. This premium amplifier is designed to meet the demands of various installation applications, providing efficient performance for both low impedance and distributed systems. Ideal for sound reinforcement, paging, and life safety applications, the PA2400T delivers a powerful output of 400W per channel for 4 Ω or 70/100 V lines, ensuring your audio needs are met with exceptional clarity and strength.The compact 2U design of the amplifier allows for easy integration into your setup, while the stepped rear-panel level attenuation provides precise control over sound output. The bridged mono out feature impressively delivers 860W into 8 Ω, ensuring that your audio is projected loud and clear.With built-in protection circuits such as Thermal Overload Protection and Dynamic Audio Limiters, the PA2400T safeguards your amplifier and connected loudspeaker systems from potential damage. This amplifier also offers a selectable high-pass filter and low-noise high-performance fans for optimal audio quality and thermal stability, making it a reliable choice for any installation.Invest in the Electro-Voice PA2400T 2 Channel 100V Line Amplifier for exceptional value, versatility, and peace of mind in your audio setup. Elevate your sound reinforcement, paging, and public address systems with this reliable and high-performance amplifier.Key Specifications:- Power Output: 2x400W/100V- Channels: 2- Construction: 2U rack-mountable design- Protection Circuits: Thermal Overload Protection, Dynamic Audio Limiters- Special Features: Bridged mono out feature, selectable high-pass filter, low-noise high-performance fans- Amplifier Type: 100V Line AmplifierProduct Specifications General Amplifier Gain: 34 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 215 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz -1dB, ref. 1kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 400/200 W 70V/100V-400 Rated output power (*rated load) THD < 1%, 1kHz: 430/215 W 70V/100V-430 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 25 V/µs 70V-46, 100V-65 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 26kg

Read more less

- Efficient performance for low impedance or distributed systems- Ideal for sound reinforcement, paging, and life safety applications- Comprehensive protection circuits to safeguard the power amplifier and connected loudspeaker systemsStep into the world of professional audio amplification with the Electro-Voice PA2250T 2-Channel 100V-Line Amplifier. Designed for optimal performance in low impedance or distributed systems, this amplifier delivers efficient power output suitable for a range of applications, from sound reinforcement to paging and life safety announcements.Experience peace of mind knowing that your audio system is protected by a host of safety features, including Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection. The integrated hi-pass filters allow you to tailor your sound by attenuating unwanted low-frequency signals, while the stepped rear-panel level attenuation gives you precise control over your audio output.Compact yet powerful, the PA2250T offers 250W per channel for 4 Ω or 70/100 V lines, with a bridged mono out option for a whopping 540W into 8 Ω. The 2 RU design ensures easy integration into your setup, while the three-stage front-to-rear fans provide optimal thermal stability without compromising on noise levels. With phoenix-type inputs and outputs for secure connections and integrated rack ears for direct mounting, this amplifier is a reliable and versatile choice for your audio needs. Elevate your sound system with the Electro-Voice PA2250T and enjoy professional-grade performance with peace of mind.Product Specifications General Amplifier Gain: 34.3 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 135 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 125 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 250/125 W 70V/100V-250 Rated output power (*rated load) THD < 1%, 1kHz: 270/135 W 70V/100V-270 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 18 V/µs 70V-41, 100V-61 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 23.5kg

Read more less

Step into a realm of unparalleled audio excellence with the Electro-Voice CPS2.6-II Installation Power Amp. This 2U power amplifier, designed for audio professionals and contractors, is a game-changer for sound systems, delivering up to 2 x 900W into 2 ohms with exceptional clarity and precision. Secure Phoenix-type input and output connections, along with rear-mounted attenuators, provide full control over audio levels. The optional RCM-810 card enables advanced networking features, allowing seamless control via IRIS-Net software. Experience optimal sound quality with the switchable 50 Hz high-pass filter, complemented by a complete protection package, three-stage front-to-rear fans, and Class-AB design for safety and longevity. Elevate your audio setup with this reliable and efficient power amp.Specifications:- Power Output: 2 x 900W @ 2 ohms- Inputs: Phoenix-type- Networking: Optional RCM-810 Card- Control: IRIS-Net Software- High-Pass Filter: 50 Hz (switchable)- Cooling: Three-stage front-to-rear fans- Design: Class-AB- Protection: Complete protection packageProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 900 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 600 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 380 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 500 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 250 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.02 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +3.1 dBu (1.11Vrms) Intermodulation Distortion (SMPTE): 0.05 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1800 Watts Maximum Bridged Output 8Ω: 1200 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional Slew Rate: 26 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 14.8kg

Read more less

Elevate your audio projects with the Electro-Voice CPS2.4-II Installation Power Amp. This robust 2-RU amplifier delivers up to 2 x 650W into 2 ohms, ensuring powerful and clear sound performance for audio installations. Featuring versatile Phoenix-type input and output connections, a switchable 50 Hz high-pass filter, and a complete protection package, this amplifier offers reliability and flexibility for any project. The CPS2.4-II provides advanced control and cooling capabilities with programmable time for custom power-on delay settings, a module slot for the optional RCM-810 card, and three-stage front-to-rear fans. Ideal for contractors and professionals, the Electro-Voice CPS2.4-II Installation Power Amp offers ease of use and customisation options to enhance your sound system setup. Specifications:- Power Output: 2 x 450W @ 4Ω- Chassis Size: 2UProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: 2.2 dBu (1.0V) Intermodulation Distortion (SMPTE): 0.1 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional (RCM-810 card) Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 12.6 kg

Read more less

Experience unparalleled value and performance with the Electro-Voice Q44II Class A-B Power Amplifier. Specifically designed for club and mobile systems, this powerful amplifier offers exceptional power and efficiency, making it the ideal choice for a wide range of venues. With up to 650W per channel at 2 ohms, the Q44II delivers outstanding dynamic headroom, ensuring optimal transient response and 30% greater output capability for short-duration signals. The Class A-B design, coupled with dynamic limiting features, prevents output clipping and provides extensive protection against thermal damage and electrical malfunction.The Q44II is built on Electro-Voice's legacy of power and performance, taking amplifier technology to new heights. Whether you're hosting a concert, performance centre event, or sports venue, the Q44II is the perfect amplifier for all sizes of venues. Equipped with XLR pass-through input connections, protective low-cut for systems without subwoofers, and a switchable LPN filter for enhanced tonal fundamentals, this amplifier offers versatility and reliability.The Electro-Voice Q44II Class A-B Power Amplifier features three-stage front-to-rear fans for efficient cooling, ensuring optimal performance even during long durations of use. The compact and affordable design makes the Q44II an excellent choice for any audio setup. Elevate your sound system with the Electro-Voice Q44II Class A-B Power Amplifier and enjoy unparalleled performance and peace of mind.Specifications:- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Dynamic Headroom for superb audio performance- Complete protection package with built-in dynamic limiters- XLR pass-through input connections- Three-stage front-to-rear fans for efficient coolingProduct Specifications General Amplifier Gain: 32 dB Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +2.2 dBu Intermodulation Distortion (SMPTE): 0.1 % Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): No Signal-to-Noise Ratio (A-weighted): 106 dB Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Physical & Dimensions Height: 2RU 88.1 mm (3.47") Width: 483 mm (19.02") Depth: 421.5 mm (16.59") Weight Net: 12.6 kg (27.78 lbs)

Read more less