Optimal Audio

Unleash the power and precision of the Optimal Audio Amp 300 2x1350W @ 4Ω AB Performance Power Amplifier 2U in your audio setup. This robust amplifier is designed to drive Cuboid and Sub loudspeakers within the Optimal Audio ecosystem, offering uncompromising sound quality and performance. With a reliable Class A/B design delivering 1350 watts per channel into 4Ω, this amplifier ensures a clear and dynamic audio experience. Choose between Stereo, Bridge, or Parallel mode for versatile installation options tailored to your specific needs.Take control of your sound system with the Amp 300's seamless integration with the Zone processor, allowing you to maximise performance through the onboard WebApp. Configure amplifier settings effortlessly and access a variety of Optimal Audio loudspeaker presets and limiters for a customised sound experience. Equipped with flexible input connectors and front panel status monitoring, the Amp 300 combines functionality with ease of use, making it an essential component for your audio setup.Specifications:- Power: 1350 watts per channel into 4Ω- Operation Modes: Stereo, Bridge, Parallel- Design: Class A/B- Compatibility: Cuboid and Sub loudspeakers- Integration: Zone processor with WebApp control- Connectivity: Flexible input connectors- Monitoring: Front panel status monitoringProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Elevate your audio experience with the Optimal Audio Amp 200, a top-of-the-line performance power amplifier designed to provide unparalleled quality and performance. With a reliable Class A/B design, this amplifier delivers an impressive 700 watts per channel into 4Ω, ensuring crystal-clear sound quality and powerful performance. Whether you're setting up a stereo system, bridging multiple speakers, or running them in parallel, the Amp 200 offers versatile functionality with Stereo, Bridge, and Parallel modes to suit your specific needs. Crafted with a compact 2U design, this amplifier is not only powerful but also durable, making it ideal for various installation applications. The intuitive front panel design, complete with indicator LEDs for each amplifier channel, allows for easy monitoring and control. Enhance your audio setup with seamless connectivity through balanced XLR / 1/4” Jack 'Combi' line inputs and speakON® or binding post outputs. Combine the Amp 200 with a Zone processor for maximum performance and unlock a full suite of Optimal Audio loudspeaker presets, limiters, and more, easily configurable via Zone's onboard WebApp. Take your sound experience to new heights with the Optimal Audio Amp 200 and enjoy exceptional quality, flexibility, and performance in every note.Specifications:- Power Output: 700 watts per channel into 4Ω- Design: Class A/B- Modes: Stereo, Bridge, Parallel- Connectivity: XLR / 1/4” Jack 'Combi' line inputs, speakON® or binding post outputs- Compatibility: Zone processor integrationProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 700W / 8Ω: 400W / 8Ω Bridged: 1400W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 104dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

Introducing the Optimal Audio Amp 100 2x350W @ 4Ω AB Performance Power Amplifier 2U, a powerhouse of performance and reliability designed to elevate your sound system to professional levels. This Class A/B amplifier delivers 350 watts per channel into 4Ω, ensuring a crisp and powerful audio experience that envelops you in exceptional sound quality. The Amp 100 features a versatile design with Stereo, Bridge, and Parallel modes, providing flexibility for various installation applications. Seamlessly tailor your audio setup with a switch on the rear panel and experience the freedom to control your sound environment.Elevate your audio system by combining the Amp 100 with a Zone processor, unlocking access to a range of Optimal Audio loudspeaker presets, limiters, and more. Easily configure these settings through Zone's onboard WebApp, enhancing the versatility and control over your sound output. The Amp 100 boasts a compact and rugged 2U design, with a user-friendly front panel that includes indicator LEDs for monitoring each amplifier channel. Connect effortlessly with balanced XLR / 1/4" Jack 'Combi' line input connectors and Speakon / binding post outputs, ensuring seamless connectivity for professional audio installations.Unleash the full potential of your sound system with the Optimal Audio Amp 100, and immerse yourself in a world of superior audio quality and performance. Perfect for anything from small venue setups to large events, this amplifier offers the reliability and power you need to take your sound to the next level.Key Specifications:- Power Output: 350 watts per channel into 4Ω- Connectivity: Balanced XLR / 1/4" Jack 'Combi' line input connectors, Speakon / binding post outputsProduct Specifications Type: CLASS AB power amplifier Power Output (4Ω -16Ω): 4Ω: 350W / 8Ω: 250W / 8Ω Bridged: 700W Cooling: Force air cooling with fan Analogue IN/LINK: Jack/XLR combo inputs Analogue Input Impedance: 7.5kOhms unbalanced, 15kOhms balanced Maximum Analogue Input Level: +20dBu Amplifier Outputs: Speakon / 4mm binding posts Signal To Noise Ratio: 102dB Frequency Response: 20-20k, +0, -0.5dB Total Harmonic Distortion: <0.03% @ 1W Slew Rate: 9.31V/us, 8 ohm load Damping Factor: >400, 8ohm load Mains Power Input: Universal Mains, 100-240V, 50-60Hz Mains Connector: IEC Dimensions WxHxD: 482mm x 88mm x 426mm (18.97” x 3.45” x 16.77”) Weight: 14.76kg (32.54lbs)

Read more less

- Drive both conventional low impedance and 70V-100V loudspeaker loads- Internal DSP presets for Optimal Audio loudspeakers- Energy Star Compliant with Power Factor Correction technologyImmerse yourself in unparalleled audio performance with the Optimal Audio SmartAmp 30 4x250W Amplifier with Integral DSP 100V 1U. This powerhouse amplifier is designed to elevate the sound quality of Optimal Audio loudspeakers to new heights. Here's why you need to add this cutting-edge amplifier to your audio setup:1. Tailored Sound Experience: With internal DSP presets specifically crafted for Optimal Audio loudspeakers, the SmartAmp 30 ensures that you experience audio exactly as the creators intended. Enjoy optimised EQ settings and overload protection for a superior listening experience.2. Versatile Compatibility: Whether you're looking to power low impedance or 70V-100V line loudspeaker loads, the SmartAmp 30 has you covered. Its four channels deliver a maximum of 250W per channel, allowing you to create a customised speaker system tailored to your space and preferences.3. Energy Efficient Performance: Say goodbye to market-specific power regulation concerns with the SmartAmp 30's Power Factor Correction technology. This Energy Star Compliant amplifier offers universal AC mains operation and ultra-low standby power consumption, ensuring consistent and reliable power delivery wherever you are.Upgrade your audio setup with the Optimal Audio SmartAmp 30 4x250W Amplifier and immerse yourself in a world of crystal-clear sound and unparalleled performance. Elevate your listening experience to new heights with the perfect combination of power, precision, and efficiency.Product Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 250W 70V-100V OUTPUT: 4 x 250W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 300W HEAT GENERATED: 1080 kJ per hour DIMENSIONS: (W) 440mm x (H) 44mm x (D) 308mm (W) 17.32” x (H) 1.73” x (D) 12.13” WEIGHT: 3.6kg (7.9lbs)

Read more less

Immerse yourself in the world of unparalleled audio quality with the Optimal Audio SmartAmp 20 4x125W Amplifier with Integral DSP. This powerhouse of an amplifier is meticulously crafted to drive Optimal Audio loudspeakers to their full potential, offering a versatile power output and power-sharing technology. Elevate your listening experience to new heights with built-in Digital Signal Processing (DSP) tailored to enhance the performance of Optimal Audio loudspeakers. The SmartAmp 20 provides signal processing presets specifically designed for Optimal Audio loudspeakers, ensuring the perfect sound balance effortlessly. The sleek half-width, 1U, 19” rack housing allows for space-efficient mounting of multiple units, providing up to 8 channels in a single 1U space. Enjoy the convenience of internal DSP presets selected via switches at the rear of the amplifier, enabling the ideal EQ and overload protection settings for your speakers. With Power Factor Correction power supply technology, the SmartAmp 20 ensures consistent, regulated power delivery worldwide, offering ultra-low standby power consumption for energy efficiency. Transform your audio setup with the Optimal Audio SmartAmp 20, where cutting-edge technology meets exceptional sound quality.Specifications:- Amplifier Type: 4-channel- Power Output: 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads- Maximum Output: 250W- Half-width, 1U, 19” rack housing- Power Factor Correction power supply technology- Internal DSP presets selected via switchesProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 4 x 125W 70V-100V OUTPUT: 4 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 4 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz (+0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 150W HEAT GENERATED: 540 kJ per hour DIMENSIONS (W) 220mm x (H) 44mm x (D) 353mm (W) 8.67” x (H) 1.73” x (D) 13.90” WEIGHT: 2.4kg (5.3lbs)

Read more less

Experience cutting-edge audio performance with the Optimal Audio SmartAmp 10 2x125W Amplifier with Integral DSP 100V Half-Rack 1U. This powerful amplifier is meticulously designed to enhance your sound system to exceptional levels. The 2 x 125W power output effortlessly drives both low impedance and 70V-100V line loudspeaker loads, delivering outstanding sound quality and clarity. Its built-in Digital Signal Processing (DSP) features tailored presets for Optimal Audio loudspeakers, ensuring optimal performance with a simple switch setting. Equipped with power sharing technology, the SmartAmp 10 can deliver up to 250W from a single channel, providing flexible power distribution according to your system requirements. The half-width, 1U design allows for convenient desktop or rack mounting, while the universal mains operation and Power Factor Correction power supply technology ensure consistent power regulation globally. Energy Star compliant for efficiency, the SmartAmp 10 offers unparalleled audio performance, flexibility, and efficiency in one sleek package.Specifications:- Power Output: 2 x 125W- Loudspeaker Load Compatibility: Low impedance and 70V-100V line- Digital Signal Processing (DSP): Yes- Power Sharing Technology: Yes- Design: Half-width, 1U- Power Supply: Universal mains operation with Power Factor Correction- Energy Efficiency: Energy Star compliantProduct Specifications TYPE: CLASS D power amplifier with DSP POWER OUTPUT (4Ω -16Ω): 2 x 125W 70V-100V OUTPUT: 2 x 125W DIGITAL SIGNAL PROCESSING: EQ & limiter presets for Optimal Audio loudspeakers COOLING: Forced air cooling with fan ANALOGUE IN/LINK: 2 balanced line inputs on Euroblock connectors ANALOGUE INPUT IMPEDANCE: 10kΩ unbalanced, 20kΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +24dBu AMPLIFIER OUTPUTS: Euroblock SIGNAL TO NOISE RATIO: > 100 dB (A-weighted, 20 Hz – 20 kHz, 8 Ω load) FREQUENCY RESPONSE: 20 Hz – 20 kHz, +0/-0.25 dB (8 Ω load, 3 dB below rated power) TOTAL HARMONIC DISTORTION: < 0.05 % (20 Hz – 20 kHz, 8 Ω load, 3 dB below rated power) SLEW RATE: 8.796V/µS at 70 V peak, low impedence, 17.77V/µS at 100 V peak, high impedence DAMPING FACTOR: 370 with 8Ω load CONTROL AND MONITORING: GPIO DSP SAMPLE RATE: 48kHz MAINS POWER INPUT: Universal Mains, 100-240V, 50-60Hz MAINS CONNECTOR: IEC POWER CONSUMPTION: 75W HEAT GENERATED: 270 kJ per hour DIMENSIONS: (W) 220mm x (H) 43.9mm x (D) 277mm (W) 8.67” x (H) 1.73” x (D) 10.91” WEIGHT: 1.9kg (4.2lbs)

Read more less

Enhance your audio control experience with the Optimal Audio ZonePad 4 Remote Wall Panel Controller. Designed for seamless control of up to four zones, this sleek wall panel boasts a contemporary aesthetic that effortlessly complements any decor.The intuitive layout, complete with touch-sensitive controls, ensures easy and convenient access to essential functions, allowing you to effortlessly adjust playback sources and microphone volumes across multiple zones from a single location. Configurable to suit your specific venue requirements, the ZonePad 4 offers a user-friendly interface that simplifies audio management.Crafted from premium materials, including zinc-plated steel and ABS, the ZonePad 4 exudes durability and quality. The clear acrylic lens adds a touch of sophistication to its design, while the 2-gang 25mm deep back box ensures a secure installation.Experience the convenience and efficiency of audio control with the Optimal Audio ZonePad 4. Elevate your audio setup with this versatile and stylish wall controller, offering not just functionality but a touch of elegance to your space.Product Specifications TYPE: 4 zone wall controller MAXIMUM DISTANCE (CAT5): 500m CONNECTION: RJ 45 DATA PROTOCOL: Optimal Audio proprietary over CAT 5 CASE MATERIAL: Zinc plated steel, ABS LENS MATERIAL: Clear acrylic BACK BOX: 2-gang 25mm deep back box DIMENSIONS (W) 146mm x (H) 86.2mm x (D) 39.3mm (W) 5.75” x (H) 3.39” x (D) 1.55” WEIGHT: 0.35kg (0.8lbs)

Read more less

Enhance the user experience and streamline audio control with the Optimal Audio ZonePad 1 1-Zone Wall Controller. This sophisticated remote control wall panel offers unparalleled convenience and functionality for managing a single zone within your Optimal Audio system.Crafted with a contemporary design that effortlessly blends into any decor, the ZonePad 1 is not just a practical tool, but a stylish addition to your space. Its intuitive touch-sensitive controls provide a seamless user experience, allowing for easy selection and volume adjustment of playback sources, as well as the input controls for a local microphone and mono music source.Designed for simplicity and efficiency, the ZonePad 1 can be easily configured to cater to the specific requirements of your venue, giving you complete control over your audio environment. Equipped with one local mic input featuring 48V phantom power and adjustable gain levels, along with a mono music input, this wall controller ensures that every essential function is at your fingertips.The Optimal Audio ZonePad 1 is more than just a control panel – it's a gateway to a superior audio experience. With its sleek touch interface, the ZonePad 1 empowers users to operate their Optimal Audio system with confidence and ease, making everyday audio management a breeze.Experience the power of intuitive control and elevate your audio system to new heights with the Optimal Audio ZonePad 1 1-Zone Wall Controller.Product Specifications TYPE: Single zone wall controller with local mic and line inputs LOCAL MIC INPUT: 1 with 48V phantom power, +12dB to +55dB gain, fixed hi-pass filter @160Hz LOCAL MUSIC INPUT: 1 x mono MAXIMUM DISTANCE (CAT5): 500m CONNECTION: RJ 45 DATA PROTOCOL: Optimal Audio proprietary over CAT 5 CASE MATERIAL: Zinc plated steel, ABS LENS MATERIAL: Clear acrylic BACK BOX: 2-gang 25mm deep back box DIMENSIONS (W) 146mm x (H) 86.2mm x (D) 39.3mm (W) 5.75” x (H) 3.39” x (D) 1.55” WEIGHT: 0.35kg (0.8lbs)

Read more less

Transform your audio experience with the Optimal Audio Zone 4 4-Zone Audio Controller DSP & WebApp 2 Mic/4 Line. Elevate every sound to perfection with this innovative audio processor that puts you in complete control of up to four distinct zones. Designed with a full suite of audio controls, this device offers unparalleled flexibility and ease of use.Immerse yourself in a world of seamless signal routing, thanks to the fully flexible routing options that allow you to customise each zone to your exact specifications. The intuitive WebApp interface empowers you to effortlessly configure your system and exert precise control over your audio environment with just a few clicks.Whether you're setting the mood in a stylish bar, creating an inviting atmosphere in a restaurant, or keeping the energy up in a busy retail space, the Optimal Audio Zone 4 is your ultimate audio companion. With 2 mic inputs, 4 stereo line inputs, and 2 HDMI inputs for added versatility, this audio controller is the cornerstone of any professional sound system.Enjoy the convenience of fully programmable presets and timed events, ensuring that your audio system operates seamlessly throughout the day. And with its very competitive pricing, the Optimal Audio Zone 4 offers exceptional value without compromising on quality.Step into a world of unparalleled sound management with the Optimal Audio Zone 4 4-Zone Audio Controller DSP & WebApp 2 Mic/4 Line. Discover a new level of audio excellence for your space.Product Specifications TYPE: 4 zone audio processor with DSP and loudspeaker presets MIC INPUTS: 2 with 48V phantom power, +12dB to +55dB gain MIC INPUT PROCESSING: Fixed hi-pass filter @160Hz; sweepable mid-band 200Hz-5kHz, +/-12dB; HF shelf @12kHz LINE INPUTS: 4 stereo with +26dB gain trim. SPDIF option on input 1 HDMI INPUTS: 2 with ARC LINE OUTPUTS: 4 ZONEPAD SOCKETS: 4 PAGING INPUTS (CAT 5): 2 LAN ETHERNET100Mbps: Yes ALARM OVERRIDE: Yes DIMENSIONS: (W) 480mm x (H) 88mm x (D) 400mm (W) 18.90” x (H) 3.46” x (D) 15.75” WEIGHT: 9.2kg (20.2lbs)

Read more less

Experience exceptional sound quality with the Optimal Audio Cuboid 10 Two-Way 10" Passive Loudspeaker. This compact yet powerful loudspeaker is meticulously designed to deliver rich, detailed sound with precision and punch, surpassing expectations with its impressive performance. Designed for versatility, the Cuboid 10 offers both portrait and landscape mounting options, allowing for flexible installation configurations to suit your preferences. The rotatable high-frequency horn ensures consistent coverage, while the 10" low frequency driver and 1" high-frequency compression driver work harmoniously to produce crystal-clear vocals and high-frequency projection.With a frequency response ranging from 65Hz to 20kHz and a maximum SPL of 120dB (continuous) and 126dB (peak), this passive loudspeaker promises an immersive listening experience. Whether installed in a small venue or used for medium throw distances, the Cuboid 10 excels in reproducing sound with exceptional clarity and depth.Crafted with a robust trapezoid wooden cabinet and a sleek black finish, the Cuboid 10 exudes professionalism and durability. Ideal for use in various settings such as event spaces, houses of worship, or conference rooms, this loudspeaker is a reliable audio solution for any environment.Enhance your audio setup with the Optimal Audio Cuboid 10 and elevate your sound experience to new heights.Product Specifications TYPE: Two-way, full range, passive loudspeaker FREQUENCY RESPONSE (with preset): 65Hz – 20kHz ± 3dB -10dB @ 49Hz DRIVERS: LF: 10” (254mm), ferrite motor system HF: 1” (25mm) exit/1.4” (25mm) voice coil, polymide dome compression driver RATED POWER: 250W (AES) 1000W (Peak) NOMINAL IMPEDANCE: 8 Ohms SENSITIVITY (1W/1m): 96dB MAXIMUM SPL: 120dB (cont), 126dB (peak) CROSSOVER: 2.8kHz passive DISPERSION (-6dB): 90˚ H x 50˚ V (user-rotatable) ENCLOSURE: Trapezoid wooden cabinet FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing CONNECTORS: 2x NL4 type PIN CONNECTIONS (INPUT): 1+/1- FITTINGS: 21 x M8, inset bolts DIMENSIONS: (W) 322mm x (H) 524mm x (D) 326mm (W) 12.68ins x (H) 16.61ins x (D) 10.28ins WEIGHT: 16kg (35.27lbs)

Read more less

Experience powerful and precise sound reproduction with the Optimal Audio Cuboid 12 Two-Way 12" Passive Loudspeaker. Designed for superior performance, this professional-grade loudspeaker effortlessly delivers rich, detailed sound with a punch that captivates audiences.Equipped with a 12” low-frequency driver for deep bass and midrange, and a 1” high-frequency compression driver for clear vocals and high-frequency projection, the Cuboid 12 ensures every detail of your audio is heard with crystal clarity.This loudspeaker boasts a robust construction with a steel grille and optional mounting hardware, allowing for flexible installation either in portrait or landscape mode. The rotatable high-frequency horn ensures consistent coverage in any configuration, while the 80° horizontal x 50° vertical coverage provides a wide dispersion pattern.With an impressive frequency response of 62Hz – 20kHz ±3dB, a maximum SPL of 123dB (continuous) and 129dB (peak), the Cuboid 12 delivers a dynamic listening experience suitable for a range of applications.Enhance your audio setup with the Optimal Audio Cuboid 12 - where power, precision, and flexibility come together to elevate your sound reinforcement to new heights.Product Specifications TYPE: Two-way, full range, passive loudspeaker FREQUENCY RESPONSE (with preset): 62Hz – 20kHz ± 3dB -10dB @ 47Hz DRIVERS: LF: 12” (300mm), ferrite motor system HF: 1” (25mm) exit/1.4” (25mm) voice coil, polymide dome compression driver RATED POWER: 300W (AES) 1200W (Peak) NOMINAL IMPEDANCE: 8 Ohms SENSITIVITY (1W/1m): 98dB MAXIMUM SPL: 123dB (cont), 129dB (peak) CROSSOVER: 2.5kHz passive DISPERSION (-6dB): 80˚ H x 50˚ V (user-rotatable) ENCLOSURE: Trapezoid wooden cabinet FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing CONNECTORS: 2x NL4 type PIN CONNECTIONS (INPUT): 1+/1- FITTINGS: 21 x M8, inset bolts DIMENSIONS: (W) 360mm x (H) 575mm x (D) 392mm (W) 14.17” x (H) 22.64” x (D) 15.43” WEIGHT: 20kg (44.09lbs)

Read more less

Experience unparalleled audio excellence with the Optimal Audio Cuboid 15 Two-Way 15" Passive Loudspeaker in sleek Black. Boasting a formidable 500W power capacity at 8Ω, this professional-grade loudspeaker is designed to elevate your sound experience to new heights.Immerse yourself in crystal-clear sound reproduction, from the deepest bass tones to the highest frequencies, thanks to the Cuboid 15's 15" low-frequency driver and 1" high-frequency compression driver. With a frequency response of 58Hz – 18kHz ±3dB and a maximum SPL of 126dB (continuous) and 132dB (peak), every nuance of your audio is captured with remarkable precision.Versatility is key with the Cuboid 15, offering portrait or landscape mounting options to suit your space and preferences. The rotatable high-frequency horn ensures consistent coverage in any setup, while the 80° horizontal x 50° vertical coverage spreads your audio far and wide.Constructed with a trapezoid wooden cabinet and a black perforated steel grille, the Cuboid 15 is not only a powerhouse of sound but also a statement of elegance. Whether you're a professional installer or an avid audiophile, this loudspeaker promises a seamless installation process and a robust, reliable performance.Step into a world of audio clarity and brilliance with the Optimal Audio Cuboid 15 - where sophistication meets superior sound engineering. Elevate your auditory experience like never before.Product Specifications TYPE: Two-way, full range, passive loudspeaker FREQUENCY RESPONSE (with preset): 58Hz – 18kHz ± 3dB -10dB @ 40Hz DRIVERS: LF: 15” (380mm), ferrite motor system HF: 1” (25mm) exit/1.75” (44mm) voice coil, polymide dome compression driver RATED POWER: 500W (AES) 2000W (Peak) NOMINAL IMPEDANCE: 8 Ohms SENSITIVITY (1W/1m): 99dB MAXIMUM SPL: 126dB (cont), 132dB (peak) CROSSOVER: 2.3kHz passive DISPERSION (-6dB): 80˚ H x 50˚ V (user-rotatable) ENCLOSURE: Trapezoid wooden cabinet FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing CONNECTORS: 2x NL4 type PIN CONNECTIONS (INPUT): 1+/1- FITTINGS: 19 x M8, inset bolts DIMENSIONS: (W) 426.5mm x (H) 691.5mm x (D) 416mm (W) 16.79” x (H) 27.22” x (D) 16.38” WEIGHT: 28kg (61.73lbs)

Read more less

Experience deep, immersive sound like never before with the Optimal Audio Sub 10 Low-Profile 10" Cabinet Subwoofer. This sleek and discreet subwoofer packs a powerful punch, delivering punchy sub-bass extension that enhances your audio experience to new heights. Designed for spaces where size is a constraint, the Sub 10 offers exceptional low-frequency performance, making it an ideal companion for smaller Optimal Audio loudspeaker systems. Its slimline profile allows for versatile placement options, whether on the ground, fixed to a wall or ceiling, or even flown using the integrated M8 inserts.Crafted with a 10” (250mm) driver and a well-sized low-frequency port to minimise air noise, this subwoofer boasts a peak SPL of 127dB, ensuring a truly dynamic listening experience. The impact-resistant steel grille protects the driver, while the rubber feet prevent any unwanted movement, guaranteeing stability during use.With a nominal impedance of 8Ω and a rated power of 250W (AES) / 1000W (Peak), the Sub 10 delivers exceptional performance. Its frequency response of 50Hz – 150Hz ± 3dB ensures deep, rich bass that fills any space. The plywood construction and black textured paint finish give it a durable yet stylish look, blending seamlessly into any environment.Enhance your audio setup with the Optimal Audio Sub 10 Low-Profile 10" Cabinet Subwoofer and elevate your listening experience to a whole new level of quality and depth.Product Specifications TYPE: Sub-bass loudspeaker FREQUENCY RESPONSE (with preset): 50Hz – 150Hz ± 3dB -10dB @ 42Hz DRIVERS: LF: 10” (250mm) RATED POWER: 250W (AES) 1000W (Peak) NOMINAL IMPEDANCE: 8Ω SENSITIVITY (1W/1m): 97dB (Half Space) MAXIMUM SPL: 121dB (cont) 127dB (peak) (Half Space) ENCLOSURE: Plywood FINISH: Black Textured Paint PROTECTIVE GRILLE: Perforated steel CONNECTORS: Euroblock type FITTINGS: 12 x M8, Inset bolts DIMENSIONS: (W) 470mm x (H) 297mm x (D) 353mm (W) 18.50” x (H) 11.7” x (D) 13.9” WEIGHT: 12.9Kg (28.4lbs)

Read more less

Experience the thunderous power of the Optimal Audio Sub 15 High-Power 15" Cabinet Subwoofer. Compact yet mighty, this passive subwoofer is the pinnacle of low-frequency performance within the Optimal Audio loudspeaker range. Designed for those seeking increased impact and depth in their sound, the Sub 15 roars with a peak SPL of 135dB, ensuring a truly immersive audio experience.Crafted with precision, the Sub 15 features a robust 15" driver housed in a plywood bass-reflex cabinet, delivering powerful sub-bass support down to 40Hz (-10dB). The sleek black textured finish adds a touch of sophistication to its durable construction. Whether placed on the ground or suspended using the integral M8 inserts, the Sub 15 adapts seamlessly to any environment, while rubber feet ensure stability and prevent unwanted movement.Delve into the depths of sound with the Optimal Audio Sub 15. Let its impactful performance elevate your audio setup to new heights, bringing every beat to life with unparalleled clarity and depth. Elevate your sound system with the Optimal Audio Sub 15 High-Power 15" Cabinet Subwoofer.Product Specifications TYPE: Sub-bass loudspeaker FREQUENCY RESPONSE (with preset): 45Hz – 150Hz ± 3dB -10dB @ 40Hz DRIVERS: LF: 15” (380mm) RATED POWER: 500W (AES) 2000W (Peak) NOMINAL IMPEDANCE: 8Ω SENSITIVITY (1W/1m): 102dB (Half Space) MAXIMUM SPL: 129dB (cont) 135dB (peak) (Half Space) ENCLOSURE: Plywood FINISH: Black Textured Paint PROTECTIVE GRILLE: Perforated steel CONNECTORS: Euroblock type FITTINGS: 12 x M8, Inset bolts DIMENSIONS (W) 716mm x (H) 443mm x (D) 480mm (W) 28.19” x (H) 17.4” x (D) 18.9” WEIGHT: 34.3Kg (75.6lbs)

Read more less

Enhance your audio system with the Optimal Audio Zone 8P 8-Zone Powered Audio Controller DSP & WebApp 2 Mic/4 Line. Elevate your sound experience with this state-of-the-art audio processor that offers unparalleled flexibility and control capabilities.- Experience the power of a full suite of audio controls for up to 8 zones, allowing you to customise your sound settings according to your preferences.- Enjoy the freedom of fully flexible signal routing, enabling seamless integration with your existing audio setup.- Benefit from 8 channels of integrated amplification, eliminating the need for separate amplifiers in small to medium applications.- Take control with the user-friendly WebApp interface, simplifying system configuration and everyday operation.- Engage with 2 mic inputs with 48V phantom power and +12dB to +55dB gain, providing high-quality audio capture.- Immerse yourself in crystal-clear sound with 4 stereo line and 2 HDMI inputs for a versatile audio experience.- Create the perfect ambiance with fully programmable presets and timed events, allowing you to set the mood effortlessly.The Optimal Audio Zone 8P is designed to be the heart of your sound system, seamlessly managing audio signal distribution across eight configurable zones. Whether you're setting up sound in a bar, restaurant, or retail space, this audio controller offers the ultimate solution for your audio needs.Invest in the Optimal Audio Zone 8P for a high-performance audio solution that combines cutting-edge technology with a user-friendly interface. Elevate your audio experience and transform any space into a premium sound environment with ease.Product Specifications TYPE: 8 zone audio processor with DSP, amplification and loudspeaker presets MIC INPUTS: 2 with 48V phantom power, +12dB to +55dB gain MIC INPUT PROCESSING: Fixed hi-pass filter @160Hz; sweepable mid-band 200Hz-5kHz, +/-12dB; HF shelf @12kHz LINE INPUTS: 4 stereo with +26dB gain trim. SPDIF option on input 1 HDMI INPUTS: 2 with ARC LINE OUTPUTS: 8 ZONEPAD SOCKETS: 8 AMPLIFIER CHANNELS: 8 AMPLIFIER POWER: 100W at 4Ω or 8Ω PAGING INPUTS (CAT 5): 2 LAN ETHERNET100Mbps: Yes ALARM OVERRIDE: Yes DIMENSIONS: (W) 480mm x (H) 88mm x (D) 400mm (W) 18.90” x (H) 3.46” x (D) 15.75” WEIGHT: 10.3kg (22.7lbs

Read more less

Enhance your audio system with the Optimal Audio Zone 4P 4-Zone Powered Audio Control DSP and WebApp 2 Mic/4 Line. Designed with a focus on flexibility and user-friendly operation, the Zone 4P is a powerful audio controller that offers a full suite of controls for up to 4 zones, making it ideal for a variety of settings from bars and restaurants to shops and offices.With its fully flexible signal routing, integrated amplification, and intuitive WebApp interface, the Zone 4P puts you in complete control of your audio setup. You can easily allocate different sources to each zone, ensuring that your sound system meets your specific requirements with precision. Equipped with 2 mic inputs with 48V phantom power and 4 stereo line inputs, along with 2 HDMI inputs for TV and video sound, the Zone 4P provides you with all the connectivity options you need. The integrated amplifiers eliminate the need for separate amplifiers in most small to medium applications, making installation straightforward and cost-effective.Moreover, the Zone 4P's fully programmable presets and timed events enable you to customise your audio experience according to your preferences and schedule. With very competitive pricing, this audio controller offers exceptional value without compromising on quality.Experience seamless audio signal management and superb sound quality with the Optimal Audio Zone 4P 4-Zone Powered Audio Control DSP and WebApp 2 Mic/4 Line. Elevate your audio system to new heights of performance and convenience with this sophisticated yet user-friendly audio controller.Product Specifications TYPE: 4 zone audio processor with DSP, amplification and loudspeaker presets MIC INPUTS: 2 with 48V phantom power, +12dB to +55dB gain MIC INPUT PROCESSING: Fixed hi-pass filter @160Hz; sweepable mid-band 200Hz-5kHz, +/-12dB; HF shelf @12kHz LINE INPUTS: 4 stereo with +26dB gain trim. SPDIF option on input 1 HDMI INPUTS: 2 withARC LINE OUTPUTS: 4 ZONEPAD SOCKETS: 4 AMPLIFIER CHANNELS: 4 AMPLIFIER POWER: 100W at 4Ω or 8Ω PAGING INPUTS (CAT 5): 2 LAN ETHERNET100Mbps: Yes ALARM OVERRIDE: Yes DIMENSIONS (W) 480mm x (H) 88mm x (D) 400mm (W) 18.90” x (H) 3.46” x (D) 15.75” WEIGHT: 9.75kg (21.5lbs)

Read more less