Martin Audio

Elevate your audio experience to new heights with the Martin Audio VIA5002 2 Channel Class D Power Amplifier. Designed for professional audio setups, this advanced amplifier embodies the perfect blend of power and efficiency. Ideal for live events, venues, and portable sound systems, the VIA5002 boasts a total power output of 5000 Watts, making it the ultimate choice for powering subwoofers and delivering exceptional sound quality.With 2 x 2500W into 4 ohms, this power amplifier ensures a seamless audio performance. The VIA5002 is not only powerful but also energy-efficient, thanks to its high efficiency design that minimizes energy consumption. Its lightweight and compact 2U rack height construction make it a breeze to transport and install, perfect for on-the-go sound setups. The comprehensive protection systems, including signal and clip limiter LEDs, guarantee safe operation and full output capability even in challenging environments with temperatures up to 40°C.Experience crystal-clear sound and reliable performance with the Martin Audio VIA5002. Key specifications:- Total Power Output: 5000 Watts- Power Output: 2 x 2500W @ 4 ohms- Rack Height: 2U- Temperature Resistance: up to 40°CProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT: 2 x 2500W into 4 ohms 2 x 1600W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience with the Martin Audio VIA5004 4 Channel Class D Power Amplifier. This powerful amplifier is designed to deliver unparalleled power and performance for small to medium-scale installations and portable sound applications. With four channels of efficient Class D amplification, this advanced amplifier offers a total power output of 5000 Watts, ensuring exceptional sound quality in demanding environments. The VIA5004 can deliver 4 x 1250 watts into 2 ohms and 2 x 2500 watts into 4 ohms bridged, making it versatile and ideal for a wide range of audio applications.Equipped with comprehensive protection functions, such as signal and clip limiter LEDs, the Martin Audio VIA5004 ensures safe operation and full output capability even in ambient temperatures up to 40°C. The switch mode power supply and variable speed cooling fan with front-to-back airflow provide efficient cooling and reliable performance. Global mains operation allows seamless compatibility with different power supplies, offering flexibility for various setups.Upgrade your sound system with the Martin Audio VIA5004 and enjoy exceptional audio performance, reliability, and ease of use. Whether for installations or portable applications, this 2U rack space amplifier is a must-have for anyone looking to enhance their audio setup.Specifications:- Channels: 4- Power Output: 5000 Watts total- Power Output per Channel: 4 x 1250 watts @ 2 ohms- Bridge Power Output: 2 x 2500 watts @ 4 ohms- Protection Functions: Signal and clip limiter LEDs- Cooling System: Variable speed cooling fan with front-to-back airflow- Temperature Range: Up to 40°C- Operation: Global mains operationProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 1250W into 2 ohms 4 x 800W into 4 ohms 4 x 450W into 8 ohms 2 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10KΩ balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, -3dB output (22kHz bandwidth) SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 10kg

Read more less

Elevate your audio experience to new heights with the Martin Audio VIA2502 2 Channel Class D Power Amplifier. This cutting-edge amplifier delivers a total power output of 2500 Watts, with two channels of efficient Class D amplification providing 2x1250 watts into 2 ohms. Whether you are a professional sound engineer or a music enthusiast, the Martin Audio VIA2502 is the ideal choice for powering BlacklineX, CDD, and V.Series systems in various installations and portable sound applications. Designed to meet the demands of challenging environments, this amplifier combines exceptional lightweight and compact 2U rack height design with a range of advanced features. The comprehensive protection systems ensure safe operating conditions, while the variable speed cooling fan and front-to-back airflow keep the amplifier cool even under pressure. Invest in the Martin Audio VIA2502 and enjoy unparalleled audio performance with ease.Specifications:- Power Output: 2x1250W @ 2Ω- Class: Class D- Total Power Output: 2500 Watts- Rack Height: 2UProduct Specifications General TYPE: Two-channel Class D amplifier POWER OUTPUT 2 x 1250W into 2 ohms 2 x 800W into 4 ohms 2 x 450W into 8 ohms 1 x 2500W bridged into 4 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 2 x female, 2 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 10kΩ Balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 2 x Neutrik Speakon™ NL4 OUTPUT NOISE: -113dBA, referenced to max output (22kHz bandwidth) FREQUENCY RESPONSE: <10Hz ->20kHz +/- 0.25dB TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W SLEW RATE: > 80V per microsecond DAMPING FACTOR: 120 ref 8 ohms POWER SUPPLY: High current, high frequency switch-mode AC OPERATING RANGE 100-240V +/-10% 45 - 65Hz TOTAL SYSTEM EFFICIENCY: > 90% typical MAINS CONNECTOR: 1 x Neutrik Powercon™ Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less

Elevate your sound experience with the Martin Audio VIA2004 4 Channel Class D Power Amplifier. Delivering a total power output of 2000 Watts across four channels, this advanced amplifier is designed to take your audio to new heights. Ideal for venues such as bars, auditoriums, and HoW, the VIA2004 is the perfect choice for small to medium-scale sound reinforcement and club use. Benefit from its efficient Class D amplification technology, which not only reduces energy consumption but also ensures the power reserves needed for exceptional sound quality. The lightweight and compact 2U rack height design makes it versatile for fixed installations or portable applications. Trust in the VIA2004's comprehensive protection functions to maintain safe operating conditions and deliver consistent audio performance. With a variable speed cooling fan and front-to-back airflow, temperature regulation is optimal even in ambient temperatures up to 40°C. Pair the VIA2004 with the Martin Audio DX0.5 or DX4.0 system processor for seamless integration and control under VU-NET. Take advantage of cost-effective scalability and resolution with this powerful amplifier from Martin Audio.Specifications:- Channels: 4- Power Output: 500W per channel @ 4Ω- Total Power Output: 2000 Watts- Rack Height: 2UProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 500W into 4 ohms 4 x 250W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 5 kΩ typical, balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 FREQUENCY RESPONSE: 20Hz - 20kHz +/- 0.45dB, 4 ohm load TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz MAINS CONNECTOR: 1 x Neutrik Powercon™ TOTAL SYSTEM EFFICIENCY: 89% (4 x 250W into 8 ohms) Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less

- Four channels of efficient Class D amplification- High power density in 2U rack height- Advanced DSP and network control for superb audio performanceExperience unparalleled power and performance with the Martin Audio iKon iK42 4 Channel Class D Amplifier. This advanced amplifier is a game-changer in the world of audio equipment, offering a combination of high power density, state-of-the-art DSP, and network control capabilities.With four channels of efficient Class D amplification, the iK42 delivers up to 3000W per channel @ 4Ω, making it ideal for a wide range of audio setups. Its compact 2U rack height design ensures high power density without taking up too much space in your setup.The iK42 is not just about power - it's about precision and control. The high-performance 96kHz DSP on all inputs and outputs, along with up to 1000 FIR filter taps @ 48kHz on each output channel, ensures maximum performance and compatibility with Martin Audio Wavefront Precision line arrays and XE Series stage monitors.Whether you're looking to amplify a Martin Audio loudspeaker range or provide multi-channel amplification for live events, the iKon iK42 is the ultimate choice. With Ethernet for remote control and monitoring, as well as a user-friendly front panel interface, this amplifier offers the perfect blend of power, control, and flexibility. Elevate your audio experience with the Martin Audio iKon iK42 4 Channel Class D Amplifier.Product Specifications GENERAL TYPE: Four-channel Class D amplifier POWER OUTPUT (*): 5000W into 2Ω 3000W into 4Ω 1500W into 8Ω 10000W bridged per channel pair, 4Ω CV LINE OUTPUT (*): 1250W, 25V line 3500W, 70V line 5000W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Elevate your audio setup to unparalleled levels with the Martin Audio iKon iK81 8 Channel Class D Amplifier. This advanced amplifier features eight channels of efficient Class D amplification, delivering a total power output of 10,000 Watts in a compact 2U rack height. Perfect for powering Martin Audio Wavefront Precision WPM line arrays and multi-channel setups across the Martin Audio loudspeaker range, the iK81 ensures exceptional audio performance. Equipped with a sophisticated 96kHz DSP on all inputs and outputs, the amplifier guarantees pristine sound quality with up to 1000 FIR filter taps at 48kHz on each output channel. The high efficiency of this amplifier not only reduces energy consumption but also maintains the necessary power reserves for outstanding sound reproduction in challenging live environments. With Ethernet connectivity for system remote control and monitoring via Martin Audio's VU-NET software, this amplifier offers top-tier performance and reliability. Immerse yourself in a world of precision, power, and cutting-edge technology with the Martin Audio iKon iK81.Specifications:- Power Output: 1250W per channel into 2, 4, or 8 ohms with all channels driven- Rack Height: 2U- DSP: 96kHz DSP on all inputs and outputs, up to 1000 FIR filter taps at 48kHz on each output channel- Connectivity: Ethernet for system remote control and monitoringProduct Specifications GENERAL TYPE: Eight-channel Class D amplifier POWER OUTPUT (*): 1250W into 2Ω 1250W into 4Ω 1250W into 8Ω 2500W bridged per channel pair, 4Ω or 8Ω CV LINE OUTPUT (*): 625W, 25V line 1250W, 70V line 1250W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Experience top-tier sound quality with the Martin Audio X8 BlacklineX 8" 2-Way Passive Speaker. This ultra-compact yet powerful system is designed to elevate your audio experience to new heights. 🔊 The symmetrical multi-angle plywood enclosure ensures a balanced sound projection, while the user-rotatable 90° x 50° horn allows for versatile vertical and horizontal orientation to adapt to any venue requirements.🔊 Whether you're looking to reinforce sound, enhance audio-visual events, or provide front fill, the Blackline X8 is a versatile solution. Its small size belies its remarkable output capability, making it suitable for a wide range of professional applications.🔊 Crafted with meticulous attention to detail, the Blackline X8 features a screw-free steel grille, integral ergonomic handle, and M8 inserts for wall brackets and eyebolt suspension. Its pole-mount socket with a removable bung maintains a sleek appearance in any installation setting.🔊 The X8's 8Ω nominal impedance and twin NL4 connectors offer seamless connectivity options, while its finish in black textured paint adds a touch of sophistication to its design.🔊 Pair the X8 with a BlacklineX subwoofer for an even more immersive audio experience, ideal for portable applications and installations that demand high-quality sound delivery over short and medium distances.🔊 Elevate your sound system with the Martin Audio X8 BlacklineX 8" 2-Way Passive Speaker. Immerse yourself in pristine sound quality with this exceptional piece of audio equipment.Product Specifications General Type: Ultra-compact, passive two-way system Frequency Response: 70Hz-20kHz ± 3dB, -10dB @ 60Hz Driver LF: 8” (200mm)/2” (50mm) voice coil, ferrite motor system Hf: 1” (25mm) exit/1” (25mm) voice coil, polyimide dome compression driver Rated Power: 200W AES, 800W peak Recommended Amplifier: MA2.8Q, MA2.0 Sensitivity: 92dB Maximum SPL: 115dB continuous, 121dB peak Nominal Impedance: 8 ohms Dispersion (-6dB): 90° H x 50° V (user-rotatable) Crossover: 2.9kHz passive Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel with scrim cloth backing Connectors: 2 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): 1+/- to 1+/- Physical & Dimensions Fittings: 13 x M8, 6 x M6 inserts, pole-mount socket, 1 x pocket handle Dimensions: (W) 257mm x (H) 422mm x (D) 243mm Weight: 8kg Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Unobtrusive stage monitoring Corporate AV events and conferences Weddings and parties Main PA infill Secondary stages at festivals HoW, leisure centres and retail outlets

Read more less

Introducing the Martin Audio X10 BlacklineX 10" 2-Way Passive Speaker Rotatable 90x50° Black, a pinnacle of audio excellence in a compact form. This high-performance yet remarkably small two-way passive loudspeaker system is designed to elevate your sound experience to new heights.🔊 Experience crisp and clear audio with a 10” LF driver and a 1” HF compression driver, delivering a perfect balance of powerful bass and precise high frequencies for an immersive sound experience.🔊 The rotatable 90° x 50° HF horn provides equal directivity control in both horizontal and vertical planes, ensuring optimal sound dispersion for a truly exceptional listening experience.🔊 Whether you're setting up distributed sound reinforcement, House of Worship events, AV installations, frontfill, infill, or discreet stage monitoring, the X10 is versatile enough to handle it all with finesse.🔊 With a maximum SPL of 124dB @ 1m, this speaker is ideal for music bars and clubs, providing upfront sound levels from a compact enclosure that defies its size.🔊 Partner the X10 with a BlacklineX Series subwoofer for a small yet powerful dancefloor or sound reinforcement system that offers remarkable performance in a portable package.🔊 Constructed from plywood with a sturdy steel grille, the X10 is not only durable but also designed for easy installation with M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket for added flexibility.🔊 Finished in sleek black textured paint, the X10 exudes a professional aesthetic that complements any environment, from live stages to corporate events.🔊 While the X10 can be used without a controller, pairing it with a Martin Audio DX0.5 will unlock its full potential with advanced EQ and limiter functions. For a complete audio experience, pair it with an X115, X118, or X210 subwoofer and let the DX0.4 or DX0.6 handle crossover and EQ functions seamlessly.Elevate your audio game with the Martin Audio X10 BlacklineX 10" 2-Way Passive Speaker - your ticket to professional-grade sound reinforcement tailored to your specific needs.Product Specifications General Type: Compact, passive two-way system Frequency Response: 65Hz-20kHz ± 3dB, -10dB @ 55Hz Driver: LF: 10” (250mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.4” (35mm) voice coil, polyimide dome compression driver Rated Power: 250W AES, 1000W peak Recommended Amplifier: MA2.0 Sensitivity: 94dB Maximum SPL: 118dB continuous, 124dB peak Nominal Impedance: 8 ohms Dispersion (-6dB): 90° H x 50° V (user-rotatable) Crossover: 2.4kHz passive Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel with scrim cloth backing Connectors: 2 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): 1+/- to 1+/- Physical & Dimensions Fittings: 19 x M8 inserts, pole-mount socket, 1 x bar handle Dimensions: (W) 324mm x (H) 522mm x (D) 289mm Weight: 14kg

Read more less

Immerse yourself in the unparalleled quality of the Martin Audio X12 BlacklineX 12" 2-Way Passive Speaker. With its compact yet robust design, this speaker system is engineered to exceed your expectations in both sound performance and versatility.🔊 Prepare to elevate your audio experience with the Blackline X12's symmetrical multi-angle plywood enclosure, delivering a symphony of sound that captivates every corner of the room. The user-rotatable 80° x 50° horn ensures optimal sound dispersion, perfect for medium throw applications where precision and clarity are paramount.💪 Built to impress, the Blackline X12 features a 12” LF driver unit and a 1” exit compression driver, guaranteeing powerful bass and extended high-frequency response. The high BL motor and poly-imide diaphragm of the HF compression driver contribute to a crisp and articulate audio output that will leave you spellbound.🎶 Whether used as a standalone system or paired with a BlacklineX subwoofer, the X12 delivers high sound levels that are sure to mesmerise any audience. Thanks to its portable design and ergonomic handle, you can take the X12 wherever your next event demands, without compromising on audio excellence.⚙️ The Blackline X12 is not only a testament to superior sound engineering but also a masterpiece of practicality. The screw-free steel grille, M8 inserts for wall brackets, and pole-mount socket with removable bung ensure a seamless installation process, maintaining clean lines and a professional appearance.🌟 Unleash the full potential of the Martin Audio X12 BlacklineX 12" 2-Way Passive Speaker and experience audio perfection like never before. Whether you're a music enthusiast, event planner, or audio professional, elevate your sound game with the exceptional Blackline X12.Product Specifications General Type: Compact, passive two-way system Frequency Response: 62Hz-20kHz ± 3dB, -10dB @ 50Hz Driver: LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Rated Power: 300W AES, 1200W peak Recommended Amplifier: MA2.0, MA3.0, MA5.0Q Sensitivity: 97dB Maximum SPL: 122dB continuous, 128dB peak Nominal Impedance: 8 ohms Dispersion (-6dB): 80° H x 50° V (user-rotatable) Crossover: 2.3kHz passive Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel with scrim cloth backing Connectors: 2 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): 1+/- to 1+/- Physical & Dimensions Fittings: 20 x M8 inserts, pole-mount socket, 1 x bar handle Dimensions: (W) 358mm x (H) 574mm x (D) 337mm Weight: 17kg

Read more less

Experience the pinnacle of sonic excellence with the Martin Audio X15 BlacklineX 15" 2-Way Passive Speaker. Delivering impressive power and clarity, this high-performance speaker is a must-have for professional portable applications and installations that demand nothing but the best.🔊 The Martin Audio X15 features a symmetrical multi-angle plywood enclosure, ensuring optimal sound projection in any setting. Its user-rotatable 80° x 50° horn allows for versatile vertical and horizontal orientation, giving you the flexibility to adapt to various sound requirements with ease.🔊 Designed for maximum impact, the Martin Audio X15 boasts a 15” (380mm) LF drive unit with a 3” (75mm) voice coil, delivering deep, punchy bass. The 1” (25mm) exit HF compression driver with a 1.75” (44mm) polyimide diaphragm ensures extended high-frequency response, capturing every nuance of your audio with precision.🔊 Constructed from sturdy plywood and equipped with a screw-free steel grille, the X15 is as durable as it is powerful. The integral ergonomic handle makes transportation a breeze, while the pole-mount socket with a removable bung maintains a sleek appearance in any installation setup.🔊 Thanks to its 8Ω nominal impedance and Twin NL4 connectors, the Martin Audio X15 offers versatile connectivity options. Whether used on its own or paired with a compatible subwoofer like the X115, X118, or X210, this speaker delivers exceptional sound quality without compromise.🔊 Elevate your audio experience with the Martin Audio X15 - the ultimate choice for professionals who demand superior performance and reliability in a sleek black finish. Perfect for concerts, events, installations, and more, this passive two-way system is a sound investment in top-tier audio excellence.Product Specifications General Type: High-power, passive two-way system Frequency Response: 55Hz-20kHz ± 3dB, -10dB @ 45Hz Driver: LF: 15” (380mm)/3” (75mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Rated Power: 400W AES, 1600W peak Recommended Amplifier: MA3.0, MA5.0Q Sensitivity: 99dB Maximum SPL: 125dB continuous, 131dB peak Nominal Impedance: 8 ohms Dispersion (-6dB): 80° H x 50° V (user-rotatable) Crossover: 2.2kHz passive Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel with scrim cloth backing Connectors: 2 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): 1+/- to 1+/- Physical & Dimensions Fittings: 19 x M8 inserts, pole-mount socket, 2 x bar handles Dimensions: (W) 427mm x (H) 690mm x (D) 419mm Weight: 24kg Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Unobtrusive stage monitoring Corporate AV events and conferences Weddings and parties Main PA infill Secondary stages at festivals HoW, leisure centres and retail outlets

Read more less

Introducing the Martin Audio FP4 4" 2-Way Passive Install/Portable Coaxial Speaker in sleek black, a sophisticated choice for those seeking premium sound quality in a compact package. Designed for use with the Martin Audio DX Network System controllers or iKon Amplifiers, this speaker guarantees optimal performance and exceptional audio reproduction.🔊 The FP4 boasts a Coaxial Point Source configuration, delivering a wide frequency response that ensures crystal-clear sound for both speech and music. With a 4” LF driver and a 0.7” exit HF driver, this speaker achieves an impressive maximum SPL of 108dB peak, perfect for intimate spaces that demand premium audio quality.🏢 Ideal for installations requiring spot and fill coverage in restricted spaces, the FP4 excels in environments such as small stages, churches, museums, bars, and restaurants. Its versatile mounting options, including compatibility with mic stands, allow for discreet integration in any setting, ensuring a seamless aesthetic appeal.🎵 Portable yet powerful, the FP4 is a standout choice for corporate AV events and as a fill speaker in larger sound systems. Pair it with a subwoofer for a premium background music system that enhances the ambience of various venues.🛠 Crafted with a durable birch plywood enclosure finished in hardwearing textured paint, the FP4 exudes quality and reliability. Its threaded inserts for U-brackets offer additional mounting flexibility, making installation a breeze.Experience exceptional audio performance with the Martin Audio FP4 — the compact solution for premium sound in any setting.Product Specifications Type: Coaxial passive 2-way Crossover Frequency: 2.6kHz Frequency Response - 4π (5): 142Hz - 18kHz ± 3dB, -10dB @103Hz with preset Drivers: LF: 4", 1.25" Voice coil, Ferrite Motor HF: 0.7" exit, 1" Voice coil, Coaxial HT polymer dome compression driver Sensitivity: (4V 1m free-field) 84dB Nominal Impedance: 16 Ohms Rated Power: 60W AES, 240W peak Maximum SPL: 102dB Cont, 108dB Peak (6dB) Dispersion (-6dB): 110° conical Connectors: NL4MPXX speakons (pair), Pheonix terminal block 1725302 Pin Connections (INPUT): 1+ / 1- Pin Connections (LINK): 1+/- and 2+/- Fittings: 4 x M6 inserts, 1 x 3/8” (mic stand) fixing point Dimensions: (W) 130mm, (H) 130mm, (D) 126mm (W) 5.1ins, (H) 5.1ins, (D) 5.0ins Weight: 1.9kg (4.2lbs) Volume: 0.8L

Read more less

Introducing the Martin Audio FP6 6" 2-Way Passive Install/Portable Coaxial Speaker in sleek black. Elevate your audio experience with this premium, ultra-compact point-source loudspeaker that packs a punch in performance and coverage consistency. 🔊 Designed for short-throw applications demanding exceptional sonic quality from a compact enclosure, the FP6 delivers full-frequency response and impressive output capabilities. Ideal for small spaces requiring spot and fill coverage, this speaker is a standout choice for spaces like churches, museums, theatres, and restaurants.🔊 Versatile and discreet, the FP6 features a multi-angle enclosure with flexible mounting options, seamlessly integrating into various architectural settings. Perfect for premium corporate AV events and music playback systems when paired with a subwoofer, its portable yet potent nature also makes it an excellent fill speaker within larger touring or installed sound systems.🔊 Boasting a 6” LF driver and a 0.7” exit HF driver with a 1.4” high-temperature polymer dome, the FP6 achieves an impressive maximum SPL of 119dB peak. Its well-defined 100° H x 80° V dispersion pattern, along with horizontal constant directivity characteristics, ensures unparalleled sound projection.🔊 Embrace unparalleled audio clarity and power with the Martin Audio FP6. Elevate your sound experience with this compact yet mighty speaker that brings superb sonic performance to any space.Product Specifications Type: Coaxial passive 2-way Crossover Frequency: 2.3kHz Frequency Response - 4π (5): 73Hz - 20kHz ± 3dB, -10dB @57Hz with preset Drivers: LF: 6", 1.25" Voice coil, Neodymium Motor with flux stabilising rings HF: 0.7" exit, 1.4" Voice coil, Coaxial HT polymer dome compression driver Sensitivity(4V 1m free-field): 91dB Nominal Impedance: 16 Ohms Rated Power: 150W AES, 600W peak Maximum SPL: 113dB Cont, 119dB Peak (6dB) Dispersion (-6dB): 110° H, 80° V Connectors: NL4MPXX speakons (pair) Pin Connections (INPUT): 1+ / 1- Pin Connections (LINK): 1+/- and 2+/- Fittings: 4 x M10, 15 x M6 fixing points, 1 x 3/8” (mic stand) fixing point Dimensions: (W) 321mm, (H) 220mm, (D) 197mm (W) 12.6ins, (H) 8.7ins, (D) 7.8ins Weight: 5.5kg (12.1 lbs) Volume: 7L

Read more less

Experience impeccable sonic performance and unparalleled coverage consistency with the Martin Audio FP8 8" 2-Way Passive Portable Coaxial Speaker in Black. This premium ultra-compact point-source loudspeaker is meticulously designed for short-throw applications that demand nothing less than perfection.Crafted for a spectrum of applications, from professional AV events to architectural integrations, the FP8 boasts a full-frequency response and impressive output capabilities within its compact form. Ideal for touring, installations, and corporate events, this speaker is a versatile powerhouse that never compromises on quality.Featuring a coaxial driver system with an 8” LF driver and a 1” exit HF driver, the FP8 delivers a maximum SPL of 124dB peak, ensuring that every note is crystal clear and impactful. Its 90° H x 70° V dispersion pattern and constant directivity characteristics guarantee consistent sound projection in any environment.Discreetly integrated into architectural spaces or deployed as a powerful stage monitor, the FP8 offers flexibility and convenience without sacrificing performance. When paired with a subwoofer, it becomes an exceptional choice for premium audio experiences, making it perfect for a range of venues, from theatres and museums to bars and corporate settings.Elevate your sound experience with the Martin Audio FP8 - a compact yet powerful solution that redefines the standards of portable passive loudspeakers. Order yours today and immerse yourself in a world of uncompromising audio excellence.Product Specifications Type: Coaxial passive 2-way Crossover Frequency: 2.0kHz Frequency Response - 4π (5): 63Hz - 18kHz ± 3dB, -10dB @50Hz with preset Drivers: LF: 8", 2" Voice coil, Neodymium Motor with flux stabilising rings HF: 1" exit, 1.7" Voice coil, Coaxial HT polymer dome compression driver Sensitivity (2.83V 1m free-field): 94dB Nominal Impedance: 8 Ohms Rated Power: 250W AES, 1000W peak Maximum SPL: 118dB Cont, 124dB Peak (6dB) Dispersion (-6dB): 90° H, 70° V Connectors: NLT4MPXX-BAG speakons (pair) Pin Connections (INPUT): 1+ / 1- Pin Connections (LINK): 1+/- and 2+/- Fittings: 4 x M10, 15 x M6 fixing points, dual pole-mount socket, 2 x handle pockets Dimensions: (W) 376mm, (H) 280mm, (D) 265mm (W) 14.8ins, (H) 11.0ins, (D) 10.4ins Weight: 9.3kg (20.5lbs) Volume: 13L

Read more less

Experience unparalleled sonic performance with the Martin Audio FP12 12" 2-Way Passive Coaxial Speaker in striking Black. Crafted for excellence, this premium speaker is a must-have for those seeking exceptional sound quality and high output capability in a compact design.🔊 Elevate your sound experience with the FP12's Coaxial Point Source configuration, featuring a user-rotatable drive unit for optimal sound dispersion. The 12" low distortion neodymium LF driver combined with the 3" titanium diaphragm HF driver delivers powerful, crystal-clear audio with a maximum SPL of 128dB peak.🎶 Designed for versatility, the FP12 is perfect for various applications ranging from live sound and installations to corporate events, musicians, and DJs. Its multi-angle enclosure and wide mounting options make it ideal for rental companies and professional setups that require flexibility and quick deployment.⚡️Enhance your setup further by pairing the FP12 with a subwoofer for premium short-throw corporate AV events or music playback systems. You can also use it as a high-output stage monitor or integrate it into a larger sound system for touring or installations.🌐 For optimum performance, the FP12 must be used with Martin Audio DX Network System controllers or iKon Amplifiers. Ensure your speakers deliver exceptional sound quality by pairing them with the right equipment.Invest in the Martin Audio FP12 12" 2-Way Passive Coaxial Speaker for extraordinary sound reproduction, impressive coverage consistency, and a superior listening experience. Elevate your audio setup to new heights with this versatile and high-performance speaker system.Product Specifications Type: Coaxial passive 2-way Crossover Frequency: 1.5kHz Frequency Response - 4π (5): 55Hz - 20kHz ± 3dB, -10dB @44Hz with preset Drivers: LF: 12", 3" Voice coil, Neodymium Motor with flux stabilising rings HF: 1.4" exit, 3" Voice coil, Coaxial titanium dome compression driver Sensitivity (2.83V 1m free-field): 97dB Nominal Impedance: 8 Ohms Rated Power: 350W AES, 1400W peak Maximum SPL: 122dB Cont, 128dB Peak (6dB) Dispersion (-6dB): 90° H, 60° V Connectors: NLT4MPXX-BAG speakons (pair) Pin Connections (INPUT): 1+ / 1- Pin Connections (LINK): 1+/- and 2+/- Fittings 4 x M10, 17 x M8 fixing points, dual pole-mount socket, 2 x handle pockets Dimensions: (W) 521mm, (H) 390mm, (D) 346mm (W) 20.5ins, (H) 15.4ins, (D) 13.6ins Weight: 17.5kg (38.6lbs) Volume: 33.5L

Read more less

Immerse yourself in a world of unparalleled sound quality with the Martin Audio FP15 15" 2-Way Passive Install/Portable Coaxial Speaker in sleek black. This premium point-source loudspeaker sets the standard for sonic excellence in short and medium-throw applications.🔊 Experience the powerhouse performance of the FP15, boasting a high-spec 15” neodymium LF driver and a 1.4” exit HF driver with a titanium diaphragm. With a maximum SPL of 132dB peak, this speaker effortlessly delivers crystal-clear audio with impressive volume and low frequency extension, all from a standalone enclosure.🔊 Discover the FP15's precise dispersion pattern of 80° horizontal x 50° vertical, offering consistent horizontal directivity characteristics for uniform sound coverage. By integrating a dedicated waveguide within the magnet structure to form the HF horn, this speaker design avoids irregularities in frequency response, setting it apart from conventional coaxial designs.🔊 Crafted from durable birch plywood and finished in hardwearing textured paint, the FP15's enclosure is built to last. With multiple threaded inserts, this speaker offers versatile mounting options including eyebolt, yoke, wall bracket, and truss mounting for seamless integration into any setting.🔊 Elevate your audio experience with the Martin Audio FP15 – where cutting-edge technology, premium materials, and exceptional design converge to bring you unparalleled sound quality in a portable and installation-friendly package.Product Specifications Type: Coaxial passive 2-way Crossover Frequency: 1.1kHz Frequency Response - 4π (5): 50Hz - 20kHz ± 3dB, -10dB @39Hz with preset Drivers: LF: 15", 3.5" Voice coil, Neodymium Motor with flux stabilising rings HF: 1.4" exit, 3" Voice coil, Coaxial titanium dome compression driver Sensitivity (2.83V 1m free-field): 99dB Nominal Impedance: 8 Ohms Rated Power: 500W AES, 2000W peak Maximum SPL: 126dB Cont, 132dB Peak (6dB) Dispersion (-6dB): 80° H, 50° V Connectors: NLT4MPXX-BAG speakons (pair) Pin Connections (INPUT): 1+ / 1- Pin Connections (LINK): 1+/- and 2+/- Fittings 4 x M10, 17 x M8 fixing points, dual pole-mount socket, 2 x handle pockets Dimensions: (W) 601mm, (H) 460mm, (D) 420mm (W) 23.7ins, (H) 18.1ins, (D) 16.5ins Weight: 27.4kg (60.4lbs) Volume: 57L

Read more less

Experience unmatched audio performance with the Martin Audio CDDLIVE8 8" 2-Way Active Speaker in sleek black. Elevate your sound reinforcement, AV presentations, and more with this ultra-compact, self-powered system that packs a punch far beyond its small size.🔊 The CDD-LIVE 8 boasts Coaxial Differential Dispersion technology for superior audience coverage, producing consistent sound projection unlike any other. Rotate the 8" LF/1" HF Coaxial driver to suit your horizontal or vertical setup preference, offering versatility for various professional applications.🎵 Featuring a robust two-channel Class D amplifier and Dante™ digital audio networking, this speaker simplifies setup and optimises control, eliminating the need for cumbersome amplifier racks. With 1000W LF + 300W HF peak output, enjoy powerful, clear sound that adapts seamlessly to global mains voltages from 100 to 240V 50/60Hz.🎚️ Dive into the depths of customisable sound enhancement with DSP functions like parametric EQ, delay, muting, and gain control accessible via Ethernet for a tailored audio experience. VU-NET™ proprietary software allows for intuitive control over presets and settings, ensuring a seamless integration into your sound system.🎶 Make an impact with the Martin Audio CDDLIVE8 and redefine your audio performance with cutting-edge technology and exceptional fidelity at every turn. Ideal for stage monitors, distributed systems, and more, this active speaker is your gateway to professional-grade sound quality.Product Specifications General TYPE: Ultra-compact, Coaxial Differential Dispersion powered two-way system FREQUENCY RESPONSE (3): 70Hz – 20kHz ±3dB, -10dB @ 50Hz INPUT SENSITIVITY: -26dBu for 100dB SPL MAXIMUM SPL (2): 117dB continuous / 123dB peak DISPERSION: 110˚-80˚ horizontal, 60˚ vertical (user-rotatable) CROSSOVER: 2.3kHz Active LR8 Balance presets for pole mount/ pole mount with sub/ stage monitor Module Audio input CONNECTORS: Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon ANALOGUE INPUT IMPEDANCE: 20 kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: 24.6 Vpp (+21dBu), over voltage protected Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via rear panel switch Driver LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.4” (38mm) voice coil, polyimide dome compression driver Network CONNECTORS: 2x Neutrik ® Ethercon RJ45 PROTOCOL: TCP/IP and UDP/IP Amplifier TYPE: 2 channel switch-mode, class D PEAK OUTPUT POWER: 1300W total | 1000W LF, 300W HF AVERAGE EFFICIENCY: 89% COOLING: External convection cooled, with internal fan MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) for full output Power Supply TYPE: Switch mode, fixed frequency with PFC AC INPUT OPERATING RANGE: 85 – 265V ~ AC, 50 - 60Hz POWER FACTOR: > 0.98 NOMINAL POWER CONSUMPTION: 85W MAINS CONNECTOR: Neutrik® Powercon True1 Mechanical ENCLOSURE: Extensively braced multi-laminate plywood. FINISH: Textured black PU coating. PROTECTIVE GRILLE: HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth FITTINGS: Top hat for pole mounting | 15 x M8 mounting points | Single pocket handle | Optional weather protection cowl IP RATING: IP24 factory option available DIMENSIONS: (W) 258mm x (H) 428mm x (D) 254mm | (W) 10.16in x (H) 16.85in x (D) 10.00in WEIGHT: 14kg (30.8lbs) excluding Transit cover ACCESSORIES: Transit Cover | Optional wall, yoke and universal brackets Notes: (1) Measured on-axis in free space (4π space) at 2 metres, then referred to 1 metre(2) Measured in free space at 1 metre with a tone burst signal(3) Measured on-axis on ground plane (2π space) at 2 metres, then referred to 1 metre(4) Measured in half-space at 1 metre with a tone burst signal

Read more less

Introducing the Martin Audio CDDLIVE12 12" 2-Way Active Speaker with 1" HF Unit in sleek Black. Elevate your audio experience to unparalleled heights with this compact yet powerful self-powered system that boasts cutting-edge technology and superior sound reproduction.🔊 Immerse yourself in crystal-clear audio thanks to the innovative Coaxial Differential Dispersion (CDD) technology, which ensures consistent audience coverage and eliminates off-axis variations in frequency response for a pristine sound experience.🔊 Designed for professional applications requiring high output levels and exceptional fidelity, the CDDLIVE12 delivers a peak output capability of 128dB at 1 metre, making it ideal for a wide range of premium standalone and distributed sound reinforcement needs.🔊 With a high-specification 12" LF/1" exit HF Coaxial Differential Dispersion driver, this speaker provides a wide 110° horizontal coverage close-up, perfect for various settings including touring, theatre, live sound, concert halls, AV events, and stage monitor use.🔊 The self-powered system features a two-channel Class D amplifier, DSP, and Dante™ digital audio networking, streamlining setup, enhancing control, and eliminating the need for amplifier racks.🔊 The onboard amplifier delivers a peak output of 2000W LF + 500W HF to the drivers, with a switched-mode power supply that auto-ranges to global mains voltages from 100 to 240V 50/60Hz.🔊 Control DSP functions such as parametric EQ, delay, muting, gain, and preset selection effortlessly over Ethernet from a PC or Windows® tablet using the intuitive VU-NET™ proprietary software, ensuring a tailored audio experience.🔊 Select from 'plug-and-play' presets or create your user-defined preset directly from the rear panel, all without the need for complex computer control.Transform your audio setup with the Martin Audio CDDLIVE12 12" 2-Way Active Speaker and immerse yourself in exceptional sound quality and versatility. Elevate your sound experience today!Product Specifications General TYPE: Compact, Coaxial Differential Dispersion powered two-way system FREQUENCY RESPONSE (3): 62Hz – 20kHz ±3dB, -10dB @ 50Hz INPUT SENSITIVITY: - 30dBu for 100dB SPL MAXIMUM SPL (2): 122dB continuous / 128dB peak DISPERSION: 110˚-80˚ horizontal, 60˚ vertical (user-rotatable) CROSSOVER: 1.5kHz Active LR8 with low latency HF FIR equalisation. Balance presets for pole mount/ pole mount with sub/ stage monitor Module Audio input CONNECTORS: Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon ANALOGUE INPUT IMPEDANCE: 20 kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: 24.6 Vpp (+21dBu), over voltage protected Internal Processing Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct HPF Low latency HF FIR filters Up to 200ms input delay Pre-set selection via rear panel switch Driver LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Network CONNECTORS: 2x Neutrik ® Ethercon RJ45 PROTOCOL: TCP/IP and UDP/IP Amplifier TYPE: 2 channel switch-mode, class D PEAK OUTPUT POWER: 2500W total | 2000W LF, 500W HF AVERAGE EFFICIENCY: 89% COOLING: External convection cooled, with internal fan MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) for full output Power Supply TYPE: Switch mode, fixed frequency with PFC AC INPUT OPERATING RANGE: 85 – 265V ~ AC, 50 - 60Hz POWER FACTOR: > 0.98 NOMINAL POWER CONSUMPTION: 160W MAINS CONNECTOR: Neutrik® Powercon True1 Mechanical ENCLOSURE: Extensively braced multi-laminate plywood FINISH: Textured black PU coating PROTECTIVE GRILLE: HEX perforated mild steel with protective zinc plating and black powder coat finish. Backed with black grille cloth FITTINGS: Top hat for pole mounting | 15 x M8 mounting points | Single pocket handle | Optional weather protection cowl IP RATING: IP24 factory option available DIMENSIONS: (W) 359mm x (H) 580mm x (D) 373mm | (W) 14.13in x (H) 22.83in x (D) 14.69in WEIGHT: 28kg (61.6lbs) excluding Transit cover ACCESSORIES: Transit Cover | Optional wall, yoke and universal brackets Notes (1) Measured on-axis in free space (4π space) at 2 metres, then referred to 1 metre(2) Measured in free space at 1 metre with a tone burst signal(3) Measured on-axis on ground plane (2π space) at 2 metres, then referred to 1 metre(4) Measured in half-space at 1 metre with a tone burst signal

Read more less

Experience unmatched sound quality and versatility with the Martin Audio XP12 Blackline XP 12" Powered Loudspeaker. This compact powerhouse delivers 1300W of Class D amplification, ensuring crystal-clear audio in any setting. Designed by top acoustic engineers, the XP12 features a 12” LF driver and a 1” exit compression driver with an 80° x 50° rotatable horn, making it perfect for small to mid-size indoor venues. The LF driver's 2.5” voice coil and powerful magnet system provide tight bass response, while the HF compression driver's 1.75” polyimide diaphragm offers extended high-frequency clarity without distortion.The on-board DSP with a rotary control interface allows you to fine-tune your sound easily, with features like a three-channel mixer, three-band EQ, and voicing presets. Whether used as a standalone system, stage monitor, or paired with the XP118 subwoofer, the XP12 ensures exceptional audio performance.Built to last, the XP12 is road-ready with a durable plywood construction and a cloth-backed steel grille for driver protection. The enclosure also features M8 inserts for suspension and a pole-mount socket for easy installation.Elevate your audio experience with the Martin Audio XP12 - where power, precision, and performance converge.Product Specifications Acoustics TYPE: Compact self-powered two-way system Frequency response 62Hz – 20kHz ±3dB -10dB @ 50Hz Drivers LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Maximum spl: 122dB continuous, 128dB peak Dispersion: 80° H x 50° V (user-rotatable) Crossover: 2.3kHz active, 24dB/octave Audio In/Out Input connectors: 2 x female XLR/ ¼” jack combo Mic/line input impedance: 8 kΩ balanced ¼” Jack ts input impedance: 1 MΩ unbalanced Mix output connector: 1 x male XLR Mix output impedance: 600 Ω Balanced Internal Processing Input channel EQ: 3-band on each channel plus HPF (Ch1/2) Speaker EQ: 3 speaker mode/voicing presets Protection: LF and HF Peak and RMS limiting, amplifier thermal protection Amplifier Module Type: 2 channel switch-mode, class D Peak output power 1300W total 1000W LF, 300W HF Average efficiency: 89% Cooling: External convection cooled Maximum ambient temperature: 35°C (95°F) for full output Power Supply Type: Switch-mode, fixed frequency with PFC Ac input operating range: 100-240V ~ AC, 50 - 60Hz Power factor: > 0.98 Nominal power consumption: 550W Max Mains connector: 3-pin IEC Physical & Dimensions Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective grille: Black perforated steel with scrim cloth backing Fittings: 17 x M8 inserts, pole-mount socket, 2 x pocket handles Dimensions (W) 358mm x (H) 574mm x (D) 318mm (W) 14.1in x (H) 22.6in x (D) 12.5in Weight: 18kg (40lbs)

Read more less

Introducing the Martin Audio XP15 Blackline XP 15" 2-Way Powered Loudspeaker! Elevate your audio experience with this high-performance, self-powered loudspeaker designed by leading acoustic engineers. Boasting 1300W of Class D amplification, this powerful system is perfect for indoor portable applications and installations that demand exceptional sonic quality.With a 15" LF drive unit and a 1" HF compression driver featuring a 1.75" polyimide diaphragm, the XP15 delivers a precisely-defined 80° x 50° coverage pattern, ensuring high output capability and impactful low frequencies. The Class D amplifier module provides 1000W LF + 300W HF peak output, with RMS and peak limiters for driver protection.Equipped with an onboard DSP controlled by a rotary encoder interface and multi-function colour display, the XP15 offers versatile functionality including crossover functions, a three-channel mixer with three-band EQ per channel, and three voicing presets for flexible operation without external processing. The symmetrical enclosure, crafted from birch and poplar plywood and finished in textured black paint, is both durable and aesthetically pleasing.Designed for ease of use, the XP15 features M8 inserts for eyebolt suspension, a pole-mount socket with a removable cap, and a cloth-backed protective steel grille that allows for easy access to rotate the HF horn. Experience exceptional sound quality and flexibility with the Martin Audio XP15 Blackline XP 15" 2-Way Powered Loudspeaker — the ultimate choice for those who demand nothing but the best in audio technology.Product Specifications Acoustics Type: High output, self-powered two-way system Frequency response 55Hz – 20kHz ±3dB -10dB @ 45Hz Drivers LF: 15” (380mm)/3” (75mm) voice coil ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver Maximum SPL: 125dB continuous / 131dB peak Dispersion: 80° H x 50° V (user-rotatable) Crossover: 2kHz active, 24dB/octave Audio In/Out Input connectors: 2 x female XLR/ ¼” jack combo Mic/line input impedance: 8 kΩ balanced ¼” Jack ts input impedance: 1 MΩ unbalanced Mix output connector: 1 x male XLR Mix output impedance: 600Ω balanced Internal Processing Input channel EQ: 3-band on each channel plus HPF (Ch1/2) Speaker EQ: 3 speaker mode/voicing presets Protection: LF and HF Peak and RMS limiting, amplifier thermal protection Amplifier Module Type: 2 channel switch-mode, Class D Peak output power 1300W total 1000W LF, 300W HF Average efficiency: 89% Cooling: External convection cooled Maximum ambient temperature: 35°C (95°F) for full output Power Supply TYPE: Switch-mode, fixed frequency with PFC AC input operating range: 100-240V ~ AC, 50 - 60Hz Power factor: > 0.98 Nominal power consumption: 550W Max Mains connector: 3-pin IEC Physical & Dimensions Enclosure: Multi-angle birch/poplar ply Finish: Black textured paint Protective grille: Black perforated steel with scrim cloth backing Fittings: 13 x M8 inserts, pole-mount socket, 2 x pocket handles Dimensions (W) 427mm x (H) 690mm x (D) 407mm (W) 16.8in x (H) 27.2 x (D) 16.0in Weight: 26kg (57lbs)

Read more less

Experience crystal-clear sound and impeccable coverage with the Martin Audio LE100 12" 2-Way Passive Coaxial Stage Monitor. This compact yet powerful stage monitor is designed to elevate your live performances to the next level.🔊 The unique Coaxial Differential Dispersion technology ensures a consistent coverage pattern, with a wide 110° directly over the monitor that gradually reduces to 60° further back. This innovative design creates a near-rectangular coverage plane at head-height, maintaining optimal sound level and balance regardless of distance from the monitor.🎵 Crafted from durable plywood and finished with a sleek black textured paint, the LE100 is as robust as it is stylish. Its low-profile enclosure features ergonomic pocket handles for easy handling, while the perforated steel grille with acoustically transparent cloth backing provides excellent driver protection.🎶 Versatile in its deployment, the LE100 can be used as a stage monitor, pole-mounted sidefill, or part of a sound reinforcement system without needing to rotate the drive unit. With multiple connectors located conveniently for user configurations, this stage monitor offers flexibility like no other.🥁 Elevate your sound experience with the Martin Audio LE100 and immerse your audience in a world of impeccable audio quality and consistent coverage. Ideal for musicians, DJs, and venues looking to take their live performances to new heights, this stage monitor is the epitome of reliability and performance excellence.Product Specifications General TYPE: Two-way passive, Coaxial Differential Dispersion stage monitor FREQUENCY RESPONSE (5): 78Hz-20kHz ± 3dB, -10dB @ 58Hz DRIVERS: LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver RATED POWER (2): 300W AES, 1200W peak SENSITIVITY (8): 97dB MAXIMUM SPL (9): 129dB peak NOMINAL IMPEDANCE: 8Ω DISPERSION (-6DB): 110°-60° horizontal, 60° vertical CROSSOVER: 1.6kHz passive ENCLOSURE: Birch/poplar ply FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing BAFFLE ANGLE: 27˚ CONNECTORS: 5 x NL4 type PIN CONNECTIONS: 1+/1- FITTINGS: 2 x pocket handles Protective rubber feet on base and sides 4 x M8 inserts Pole-mount socket Physical & Dimensions Height: 302mm Width: 490mm Depth: 472mm Weight: 18kg

Read more less

Experience professional sound quality like never before with the Martin Audio LE200 15" 2-Way Passive Coaxial Stage Monitor. This compact stage monitor boasts exceptional performance and versatility, making it the ideal choice for a wide range of applications.🔊 The Coaxial Differential Dispersion technology of the LE200 ensures consistent coverage with a unique horizontal dispersion pattern, providing a near-rectangular coverage plane at head-height. This means you can enjoy a balanced sound level regardless of your proximity to the monitor.🎶 Featuring a durable plywood enclosure with integral ergonomic handles and a hard-wearing black textured paint finish, the LE200 is designed for the demands of professional use. The perforated steel grille with acoustically transparent cloth backing protects the Coaxial Differential Dispersion driver, while the moulded feet prevent movement onstage and safeguard against scratches.🔧 Switchable between bi-amp and passive operation, the LE200 offers flexibility in deployment. The internal 1.6kHz passive crossover and four NL4 connectors cater to a variety of user requirements, ensuring seamless integration into your sound setup.🔈 With a 15" LF driver with a 3" voice coil and a 1.4" HF driver, the LE200 delivers a frequency response of 68Hz-18kHz ± 3dB, with deep bass and crisp high frequencies. Its compact size, M8 rigging inserts, and multiple connectors make it easy to set up and manoeuvre, while its high output and consistent coverage make it the go-to choice for professionals seeking top-notch sound reinforcement.Elevate your audio experience with the Martin Audio LE200 – the definitive, affordable solution for stage monitoring that exceeds expectations in performance and reliability.Product Specifications General TYPE: Two-way, bi-amp/passive Coaxial Differential Dispersion FREQUENCY RESPONSE (5): 68Hz-18kHz ± 3dB, -10dB @ 50Hz DRIVERS: LF: 15” (380mm)/3” (75mm) voice coil, long excursion, shared ferrite motor system with HF HF: 1.4” (32mm) exit/3” (75mm) voice coil, titanium dome compression driver RATED POWER (2): 400W AES, 1600W peak SENSITIVITY (8): LF: 100dB, HF: 103dB Passive: 100dB MAXIMUM SPL (9): 133dB peak NOMINAL IMPEDANCE: LF/FR: 8Ω HF: 8Ω DISPERSION (-6DB): 100°-60° horizontal, 60° vertical CROSSOVER: 1.2kHz active/passive (switchable) ENCLOSURE: Birch/poplar ply FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel with scrim cloth backing BAFFLE ANGLE: 30˚ CONNECTORS: 4 x NL4 type PIN CONNECTIONS: LF/FR: 1+/- HF: 2+/- FITTINGS: 2 x pocket handles Protective rubber feet on base and sides 4 x M8 inserts Physical & Dimensions Height: 364mm Width: 610mm Depth: 562mm Weight: 26kg

Read more less

Elevate your audio experience with the Martin Audio X115 BlacklineX Subwoofer. This compact, direct-radiator subwoofer is meticulously designed to enhance the low-frequency performance of the BlacklineX Series full-range systems. Crafted with precision, the X115 features a powerful 15” driver with a 3” voice coil, delivering deep and resonant bass with exceptional clarity. The four large ports are strategically engineered to minimise air noise even at high output levels, ensuring a pristine audio quality.Not only does the X115 deliver outstanding performance, but its construction is equally impressive. The robust plywood enclosure, finished in sleek black textured paint, exudes durability and style. For added convenience, the subwoofer is equipped with a 35mm pole-mount socket, screw-free perforated steel grille, and side handles for effortless handling.Whether used singly, stacked, or flown using the integral M10 inserts, the X115 offers versatility in setup options to suit your specific audio needs. The subwoofer's 8Ω nominal impedance and compatibility with the MA Series amplifier with onboard DSP option make it a seamless addition to your sound system.Experience the true power of bass with the Martin Audio X115 BlacklineX Subwoofer. Elevate your audio setup and immerse yourself in the rich, dynamic sound that only Martin Audio can deliver.Product Specifications General Type: Compact, direct radiating subwoofer Frequency Response : 45Hz-150Hz ± 3dB, -10dB @ 40Hz Driver: 15” (380mm)/3” (75mm) voice coil, long excursion, ferrite magnet Rated Power: 500W AES, 2000W peak Recommended Amplifier: MA3.0, MA5.0Q Sensitivity: 102dB Maximum SPL: 129dB continuous, 135dB peak (half space) Nominal Impedance: 8 ohms Dispersion (-6dB): Omnidirectional Crossover: 80-120Hz active (with DSP) Enclosure: Birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel Connectors: 3 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): A: 1+/- to 1+/-, B: 2+/- to 1+/- Physical & Dimensions Fittings: 16 x M10 inserts, pole-mount socket, 2 x bar handles, provision for castors Dimensions: (W) 465mm x (H) 590mm x (D) 565mm Weight: 27kg Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Corporate AV events and conferences Weddings and parties Secondary stages at festivals HoW, leisure centres and retail outlets

Read more less

Enhance the depth and power of your sound system with the Martin Audio X118 BlacklineX Subwoofer. Designed for uncompromising performance, this subwoofer boasts a 1x18" driver with a 3" voice coil, delivering rich and impactful low frequencies with precision.Crafted for professional audio setups, the X118 features a compact and robust design that ensures optimal sound quality. The large ports of the subwoofer effectively reduce air noise, allowing for crystal-clear bass reproduction even at high volumes.Versatile in functionality, the X118 can be used standalone, stacked, or flown, thanks to its integral M10 inserts. The sleek black finish adds a touch of sophistication to any setup, while the screw-free perforated steel grille protects the driver without compromising sound quality.Equipped with a 35mm pole-mount socket and side handles for easy transport, the X118 is designed for convenience and durability. The plywood construction and impact-resistant grille ensure longevity, making it a reliable choice for professional audio applications.Whether used in studios, live events, or installations, the Martin Audio X118 BlacklineX Subwoofer is the perfect complement to BlacklineX Series full-range loudspeakers. Elevate your audio experience and feel the deep, resonating bass like never before with this exceptional subwoofer.Product Specification General Type: Compact, direct radiating subwoofer Frequency Response (5): 42Hz-150Hz ± 3dB, -10dB @ 38Hz Driver: 18” (460mm)/3” (75mm) voice coil, long excursion, ferrite magnet Rated Power: 500W AES, 2000W peak Recommended Amplifier: MA3.0, MA5.0Q Sensitivity: 104dB Maximum SPL: 131dB continuous, 137dB peak (half space) Nominal Impedance: 8 ohms Dispersion (-6dB): Omnidirectional Crossover: 80-120Hz active (with DSP) Enclosure: Birch/poplar ply Finish: Black textured paint Protective Grille: Black perforated steel Connectors: 3 x NL4 type Pin Connections (INPUT): 1+/1- Pin Connections (LINK): A: 1+/- to 1+/-, B: 2+/- to 1+/- Physical & Dimensions Fittings: 16 x M10 inserts, pole-mount socket, 2 x bar handles, provision for castors Dimensions: (W) 530mm x (H) 669mm x (D) 640mm Weight: 33kg Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Corporate AV events and conferences Weddings and parties Secondary stages at festivals HoW, leisure centres and retail outlets

Read more less

Introducing the Martin Audio X218 BlacklineX 2x18" Subwoofer with 4" Voice Coil in sleek black finish. Elevate your sound experience with this high-performance subwoofer designed for use with BlacklineX Series full-range loudspeakers. With an operating range of 42Hz-200Hz, it delivers impeccable sound quality, high output levels, and low distortion, making it ideal for a variety of applications.🔊 Immerse yourself in the deep, powerful bass produced by the two 18” drivers with 4” voice coils, housed in a durable plywood enclosure. The eight large ports reduce air turbulence at high output levels, ensuring clear and precise sound projection. Whether used singly or stacked horizontally, the Blackline X218 guarantees an exceptional audio performance.🎶 Perfect for portable sound reinforcement, live music clubs, bars, corporate events, and more, this subwoofer is a versatile addition to any sound setup. With a rated power of 1600W AES (6400W peak) and a maximum SPL of 141dB peak, the Blackline X218 is ready to deliver an unforgettable auditory experience in any setting.🔈 Incorporating practical features such as integral ergonomic handles, pole-mount socket, and stable horizontal stacking capabilities, this subwoofer is designed for convenience and ease of use. Its sleek black textured paint finish and black perforated steel grille add a touch of sophistication to its robust construction.Experience the superior sound quality and impeccable performance of the Martin Audio X218 BlacklineX Subwoofer. Elevate your audio setup, captivate your audience, and make a lasting impression with this professional-grade subwoofer that sets the standard for excellence in sound reproduction.Product Specifications TYPE: Dual-driver, direct radiating subwoofer FREQUENCY RESPONSE (5): 42Hz-200Hz ± 3dB, -10dB @ 33Hz DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet RATED POWER (2): 1600W AES, 6400W peak SENSITIVITY (8): 106dB MAXIMUM SPL (9): 141dB peak (half space) NOMINAL IMPEDANCE: 4Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: Birch/poplar ply FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel CONNECTORS: 2 x NL4 type PIN CONNECTIONS (INPUT): 1+ 1- Link Through 2+ 2- PIN CONNECTIONS (LINK): 1+ 1- Link Through 2+ 2- FITTINGS: 12 x M10 inserts, pole-mount socket DIMENSIONS: (W) 1049mm x (H) 587mm x (D) 727mm (W) 41.3ins x (H) 23.1ins x (D) 28.6ins WEIGHT: 88kg (194lbs)

Read more less

Experience powerful and precise bass with the Martin Audio SX110 1x10” Direct Radiating Slimline Subwoofer. This slimline subwoofer is meticulously designed for applications that demand exceptional impact and low-frequency performance without compromising on aesthetics. The compact size of the SX110 makes it an ideal choice for installations where space is at a premium, such as discreetly positioned under banquette seating.Equipped with a 10” driver featuring a 2” voice coil, this subwoofer delivers deep and defined bass that enhances your audio experience. The generously sized low-frequency port reduces air noise, ensuring a smooth and seamless sound output. Whether you are looking to complement the ADORN Series or small CDD loudspeakers, the SX110 is a versatile subwoofer that can be placed on the ground or flown using the integrated M8 inserts.Crafted from sturdy plywood and finished in sleek black textured paint, the SX110 exudes durability and style. The impact-resistant perforated steel grille not only adds a layer of protection to the drivers but also enhances the overall professional look of the subwoofer. With rubber feet on the base to prevent unwanted movement, the SX110 is designed for stability and reliability.Perfect for pairing with Martin Audio full-range systems, the SX110 offers the flexibility to fine-tune your audio setup with the optional DX0.5 system controller, allowing for seamless crossover and EQ functions. Elevate your sound system with the Martin Audio SX110 and experience a new level of audio performance that is both impressive and unobtrusive.Product Specifications General Frequency Response 50Hz-150Hz ± 3dB -10dB @ 42Hz Driver: 1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet Rated Power: 250W AES, 1000W peak Recommended Amplifier: VIA2004 Sensitivity: 97dB Maximum SPL: 121dB continuous, 127dB peak (half space) Nominal Impedance: 8 ohms Dispersion (-6dB): Omnidirectional Crossover: 80-120Hz active (with DSP) Enclosure: Plywood Finish: Black Protective Grille: Perforated steel Connectors: 2 x NL4 type Pin Connections (Input): +1, -1 Link through: +2, -2 Pin Connections (Link): +1, -1 Link through: +2, -2 Fittings: 12 x M8 inserts Physical & Dimensions Dimensions (INCL FEET) (W) 417mm x (H) 297mm x (D) 415mm (W) 16.4ins x (H) 11.7ins x (D) 16.3ins Weight: 12kg (26.5lbs)

Read more less

Experience deep, rumbling bass like never before with the Martin Audio SX110W 1x10” Direct Radiating Slimline Subwoofer 250W in White. This ultra-compact subwoofer is designed for applications where impactful low-frequency performance is essential, all within a visually discreet enclosure. 🎶Immerse yourself in sound with the 10” driver and 2” voice coil, delivering powerful and dynamic audio with precision. The large port of the subwoofer ensures optimal airflow, reducing air noise for a clean and immersive listening experience. 🕶️Crafted from durable plywood and finished in a sleek white, the SX110W not only delivers exceptional sound but also adds a touch of elegance to any space. Perfectly suited for applications with limited space, such as under banquette seating, this subwoofer effortlessly blends into any environment while enhancing the audio landscape. 🌟Ideal for use with Martin Audio full-range systems, the SX110W can be seamlessly integrated for a complete audio solution. Whether used on the ground or flown using the M8 inserts, this subwoofer offers versatility and performance in one compact package. Elevate your audio system with the Martin Audio SX110W and feel the music like never before. 🎵Product Specifications General Frequency Response 50Hz-150Hz ± 3dB -10dB @ 42Hz Driver: 1 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet Rated Power: 250W AES, 1000W peak Recommended Amplifier: VIA2004 Sensitivity: 97dB Maximum SPL: 121dB continuous, 127dB peak (half space) Nominal Impedance: 8 ohms Dispersion (-6dB): Omnidirectional Crossover: 80-120Hz active (with DSP) Enclosure: Plywood Finish: White Protective Grille: Perforated steel Connectors: 2 x NL4 type Pin Connections (Input): +1, -1 Link through: +2, -2 Pin Connections (Link): +1, -1 Link through: +2, -2 Fittings: 12 x M8 inserts Physical & Dimensions Dimensions (INCL FEET) (W) 417mm x (H) 297mm x (D) 415mm (W) 16.4ins x (H) 11.7ins x (D) 16.3ins Weight: 12kg (26.5lbs)

Read more less

Enhance the audio experience like never before with the Martin Audio SX112 1x12" Direct Radiating Ultra-Compact Subwoofer. Designed for those who demand the utmost clarity and power in their sound systems, this subwoofer is a testament to unparalleled craftsmanship and innovation.🔊 Immerse yourself in the depths of your favourite music or movies with the 12" driver featuring a 3" voice coil, delivering a robust 400W of power for a truly impactful bass experience.🎶 With a frequency response ranging from 48Hz to 150Hz ± 3dB, you can feel the full spectrum of sound with exceptional accuracy and definition.🏢 The ultra-compact design of the SX112 makes it a perfect choice for spaces where size is a concern, such as live music clubs, bars, nightclubs, or even retail outlets that require hidden subwoofers.🔈 Experience the full potential of the SX112 with its impressive 126dB continuous and 132dB peak SPL, ensuring every beat is felt with absolute clarity and precision.🎨 Choose between the classic black or modern white finish to seamlessly blend the subwoofer into any aesthetic, while the impact-resistant construction guarantees durability for long-lasting performance.🛠️ Equipped with integrated flying points and practical applications across various settings, the SX112 is the ideal solution for those seeking a premium sub-bass system.Invest in the Martin Audio SX112 Subwoofer and elevate your audio setup to new heights of excellence and sophistication. Experience the power of precision-engineered sound reproduction with every beat and bassline, setting a new standard for audio quality in any environment.Product Specifications TYPE: Compact, single driver, direct radiating subwoofer FREQUENCY RESPONSE: 48Hz-150Hz ± 3dB -10dB @ 35Hz DRIVER: 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER: 400W AES, 1600W peak SENSITIVITY: 100dB MAXIMUM SPL: 126dB continuous, 132dB peak (half space) NOMINAL IMPEDANCE: 8Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: 52 litre, Plywood FINISH: Black or white textured paint PROTECTIVE GRILLE: Black or white perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link+ FITTINGS: 12 x M10 inserts DIMENSIONS: (W) 487mm x (H) 390mm x (D) 410mm (W) 19.2ins x (H) 15.4ins x (D) 16.1ins WEIGHT: 21.5kg (47.3lbs)

Read more less

Enhance your audio experience to new depths with the Martin Audio SX112W 1x12" Ultra-Compact Subwoofer in striking white. This subwoofer boasts an ultra-compact design, making it the perfect solution to elevate the performance of your full-range loudspeaker models. Designed for ultimate efficiency, the SX112W features a powerful 12" long-throw bass driver with a 3" voice coil, ensuring exceptional clarity and depth in every beat. Its generously-sized reflex ports reduce air noise, delivering a clean and impactful sound profile. With a frequency response of 48Hz-150Hz ± 3dB, this subwoofer adds rich, immersive bass to your audio setup.Crafted from sturdy plywood with an impact-resistant finish, the SX112W is built to withstand the rigours of various environments. The rigid perforated steel grille protects the driver while adding a touch of elegance to its overall design.Ideal for spaces where every inch counts, the SX112W is a versatile addition to live music clubs, bars, nightclubs, museums, hotels, houses of worship, and more. Its compact size and integrated flying points make it easy to install discreetly, blending seamlessly into any setting.Elevate your audio experience with the Martin Audio SX112W Subwoofer and feel the power of deep, immersive bass like never before.Product Specifications TYPE: Compact, single driver, direct radiating subwoofer FREQUENCY RESPONSE: 48Hz-150Hz ± 3dB -10dB @ 35Hz DRIVER: 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER: 400W AES, 1600W peak SENSITIVITY: 100dB MAXIMUM SPL: 126dB continuous, 132dB peak (half space) NOMINAL IMPEDANCE: 8Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: 52 litre, Plywood FINISH: Black or white textured paint PROTECTIVE GRILLE: Black or white perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link+ FITTINGS: 12 x M10 inserts DIMENSIONS: (W) 487mm x (H) 390mm x (D) 410mm (W) 19.2ins x (H) 15.4ins x (D) 16.1ins WEIGHT: 21.5kg (47.3lbs)

Read more less

Experience powerful and dynamic low-frequency performance like never before with the Martin Audio SX115 1x15" Direct Radiating Compact Subwoofer. This compact yet mighty subwoofer boasts a long excursion 15” (380mm)/4” (100mm) voice coil driver with a water-resistant cone, delivering exceptional sound quality with a wide operating range of 45-100Hz + 3dB.Designed for versatility, the SX115 features a durable plywood enclosure finished in textured paint for long-lasting durability. The four reflex ports not only increase LF output efficiency but also minimise turbulent air noise even at high volume levels, ensuring a crystal-clear audio experience every time.For added convenience, the SX115 includes flying inserts for easy suspension of a single enclosure, as well as safety points for secure installations. Ergonomic pocket handles make handling and installation a breeze, while the coated steel grille with acoustically transparent fabric backing protects the powerful driver.Whether used as a stand-alone subwoofer or stacked for increased impact, the SX115 offers flexibility in meeting your sound system requirements. Achieve cardioid operation by arranging forward and rear-facing pairs with individual power for each enclosure and dedicated DSP presets, enhancing your audio performance further.Available in sleek black or crisp white, the Martin Audio SX115 Subwoofer is a must-have for audio professionals seeking uncompromising quality and outstanding performance. Elevate your sound system with the SX115 and immerse yourself in the richness of low frequencies like never before.Product Specifications Type: Direct radiating subwoofer Crossover Frequency: 100Hz Frequency Response 4π (5): 45Hz - 100Hz ± 3dB, -10dB @ 36Hz Drivers: LF: 15” with 4” Voice coil, Ferrite Motor Sensitivity (2.83V 1m half space) 100dB Nominal Impedance: 8 Ohms Rated Power: AES 1000W, PEAK 4000W Maximum SPL (System) 130dB continuous, 136dB peak, 142dB peak (12dB) Dispersion: Omni-Directional/ or Cardioid (paired) Connectors: 2 x NL4 Pin Connections (INPUT): 1+/- or 2+/- Pin Connections (LINK): 1+/- and 2+/- Dimensions: (W) 500mm, (H) 451mm, (D) 678mm (806mm with Casters) (W) 19.69ins, (H) 17.76ins, (D) 26.69ins (31.73ins with Casters) Weight: 36.5kg (80.5lbs

Read more less

Experience powerful and precise low-frequency performance with the Martin Audio SX118 1x18" Direct Radiating Compact Subwoofer. Designed for exceptional sound quality, this compact subwoofer features a long-excursion 18” driver with a 4” voice coil, ensuring deep bass extension down to 47Hz.✨ Elevate your sound experience with the SX118's high output capability. The tour-grade plywood enclosure not only delivers robust sound but also provides durability for touring sound reinforcement in small to medium-size venues.🔊 Whether you're setting up for a concert, corporate event, or outdoor entertainment area, the SX118 is an ideal choice. With its waterproof cone and triple roll surround, this subwoofer is perfect for ensuring a dynamic audio experience in various settings.🎶 Take your sound system to the next level with the Martin Audio SX118 - where compact design meets exceptional performance.Product Specifications TYPE: Compact, direct radiating subwoofer FREQUENCY RESPONSE: 47Hz – 150Hz ±3dB, -10dB @ 41Hz DRIVER: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER: 1000W AES, 4000W peak SENSITIVITY: 102dB MAXIMUM SPL: 138dB peak NOMINAL IMPEDANCE: 8Ω DISPERSION (-6DB): Omnidirectional/or Cardioid (paired) ENCLOSURE: Multi-laminate birch/poplar ply FINISH: Durable Polyurea Coating PROTECTIVE GRILLE: Black perforated Zintec CONNECTORS: 2 x NL4 type PIN CONNECTIONS (INPUT): LF: +1, -1 Link through: +2, -2 PINS CONNECTIONS (LINK): LF: +1, -1 Link through: +2, -2 FITTINGS: Two skids on base, with mating channels on top M20 top-mounted thread plate for pole mounting 16 x M10 mounting points 2 x bar handles, 1 on each side 4 x fittings for optional transit cover 16 x M8 inserts for optional castors DIMENSIONS (INCL SKIDS): (W) 600mm x (H) 509mm x (D) 632mm (760mm including castors) (W) 24in x (H) 20.36in x (D) 25.26in (30.38in including castors) WEIGHT: 43.5kg (96lbs) w/o castors 47kg (104lbs) with castors

Read more less

Introducing the Martin Audio SX210 2x10" Direct Radiating Slimline Dual Subwoofer. Elevate your sound experience with this sleek and powerful subwoofer designed for those seeking a discreet yet impressive audio solution. With its slimline design and dual 10" drivers featuring 2" voice coils, the SX210 delivers exceptional performance in a compact package.Crafted for versatility, this subwoofer can be used singularly, stacked, or even flown thanks to the integrated M10 inserts. Perfect for spaces where room is at a premium, the SX210 offers a frequency response of 50Hz-150Hz ± 3dB, ensuring rich and deep bass that enhances any audio setup.Built to deliver outstanding sound quality, the SX210 boasts a robust construction using birch/poplar ply, finished in a professional black textured paint. The impact-resistant perforated steel grille protects the drivers, guaranteeing durability and longevity. Additionally, the 4Ω nominal impedance and 500W AES power rating ensure an immersive audio experience ideal for a range of applications.From portable sound reinforcement to live music clubs, bars, corporate events, and more, the Martin Audio SX210 excels in delivering high-quality, low-frequency sound reproduction. Elevate your audio setup with this exceptional slimline subwoofer and experience the power of premium sound performance.Product Specifications TYPE: Slimline dual, direct radiating subwoofer FREQUENCY RESPONSE: 50Hz-150Hz ± 3dB, -10dB @ 42Hz DRIVER: 2 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet RATED POWER: 500W AES, 2000W peak SENSITIVITY: 103dB MAXIMUM SPL: 127dB continuous, 133dB peak (half space) NOMINAL IMPEDANCE: 4Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: Birch/poplar ply FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel CONNECTORS: 4 x NL4 type PIN CONNECTIONS (INPUT): 1+/1- PIN CONNECTIONS (LINK): 1+/- to 1+/- FITTINGS: 16 x M8 inserts, 2 x bar handles DIMENSIONS: (W) 718mm x (H) 295mm x (D) 465mm (W) 28.3ins x (H) 11.4ins x (D) 18.3ins WEIGHT: 20kg (44.1lbs)

Read more less

Enhance your audio setup with the Martin Audio SX212 2x12" Direct Radiating Compact Dual Subwoofer in elegant black. This subwoofer is a powerhouse of performance, featuring twin high-efficiency 12" drivers with 3" voice coils for deep and impactful bass reproduction. The optimally-sized reflex ports minimise air noise, ensuring a clean and powerful sound output.Crafted for versatility, the SX212 is the ideal companion for full-range loudspeaker systems, extending the low frequency operating range down to 40Hz. Its compact, low-profile design makes it unobtrusive yet highly effective, perfect for venues where space is a premium.Constructed from sturdy plywood and internally-braced to reduce energy transmission, this subwoofer is built to deliver exceptional sound quality while ensuring durability. The perforated steel grille adds a touch of sophistication while providing protection to the drivers.Whether you're setting up for live music clubs, nightclubs, restaurants, or houses of worship, the Martin Audio SX212 excels in various settings. With a frequency response of 48Hz-150Hz, a power rating of 800W AES, and a maximum SPL of 132dB continuous, this subwoofer delivers a dynamic and immersive audio experience.Elevate your sound system with the Martin Audio SX212 and enjoy powerful, clear bass that fills the room with rich tones. Built for excellence and performance, this subwoofer is a must-have for any audio enthusiast or professional seeking premium audio quality.Product Specifications TYPE: Compact, dual-driver, direct radiating subwoofer FREQUENCY RESPONSE: 48Hz-150Hz ± 3dB, -10dB @ 35Hz DRIVER: 2 x 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER: 800W AES, 3200W peak SENSITIVITY: 106dB MAXIMUM SPL: 132dB continuous, 138dB peak (half space) NOMINAL IMPEDANCE: 4Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: 100 litre, Plywood FINISH: Black textured paint PROTECTIVE GRILLE: Black perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link+ FITTINGS:12 x M10 inserts DIMENSIONS: (W) 872mm x (H) 390mm x (D) 437mm (W) 34.3ins x (H) 15.4ins x (D) 17.2ins WEIGHT: 39kg (86lbs)

Read more less

Introducing the Martin Audio SX212W 2x12" Direct Radiating Compact Dual Subwoofer in elegant white. Elevate your sound experience to new depths with this powerful subwoofer that boasts a compact design without compromising on performance. 🔊 Immerse yourself in deep, impactful bass thanks to the twin high-efficiency 12" drivers with 3" voice coils. Their long-throw capability ensures precise and clear bass delivery for a truly immersive audio experience.🔊 Enjoy precise sound reproduction with the SX212W's water-resistant cones that provide durability and reliability, even in challenging environments.🔊 Designed with practicality in mind, this subwoofer features a compact, low-profile styling that seamlessly blends into any space without compromising on sound quality. 🔊 Say goodbye to unwanted air noise, as the SX212W is equipped with large ports that reduce air noise for a cleaner, more refined sound output.🔊 Built to last, the enclosure of the SX212W is constructed from plywood and internally-braced to minimise energy transmission, ensuring optimal performance every time.🔊 Perfect for venues such as live music clubs, bars, nightclubs, and more, the SX212W extends the low-frequency range of your audio system down to 40Hz, delivering a rich and full sound experience.🔊 Whether you are a sound professional looking to enhance your setup or an audio enthusiast seeking a premium listening experience, the Martin Audio SX212W Subwoofer in white is the perfect choice for those who demand nothing but the best in audio quality.Product Specifications TYPE: Compact, dual-driver, direct radiating subwoofer FREQUENCY RESPONSE: 48Hz-150Hz ± 3dB, -10dB @ 35Hz DRIVER: 2 x 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER: 800W AES, 3200W peak SENSITIVITY: 106dB MAXIMUM SPL: 132dB continuous, 138dB peak (half space) NOMINAL IMPEDANCE: 4Ω DISPERSION (-6DB): Omnidirectional CROSSOVER: 80-120Hz active (with DSP) ENCLOSURE: 100 litre, Plywood FINISH: White textured paint PROTECTIVE GRILLE: White perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS: Left to right: Input+, Input -, Link -, Link+ FITTINGS:12 x M10 inserts DIMENSIONS: (W) 872mm x (H) 390mm x (D) 437mm (W) 34.3ins x (H) 15.4ins x (D) 17.2ins WEIGHT: 39kg (86lbs)

Read more less

Introducing the Martin Audio SX215 2x15" Direct Radiating Compact Subwoofer, a formidable addition to your sound system that promises unparalleled low-frequency performance. Equipped with dual long excursion 15” drivers with water-resistant cones, this subwoofer delivers exceptional bass extension and impact in a compact, sleek enclosure. Not only does it boast a very high output capability, but it also ensures reduced air noise thanks to its large frontal ports.The SX215 is meticulously designed for ease of use and installation, featuring threaded inserts for suspension, an M20 threaded plate for pole-mounting, and ergonomic handles for effortless handling. Its coated steel grille with acoustically transparent fabric backing provides protection to the drivers while maintaining exceptional sound quality.Perfect for standalone use or stacked configuration, the SX215 offers versatility and adaptability to suit your audio needs. To further enhance its performance, consider achieving cardioid operation by pairing forward and rear-facing enclosures with dedicated DSP presets.Whether you choose the striking black finish for a classic look or opt for the pristine white option, the Martin Audio SX215 is a powerful, reliable subwoofer that will elevate your audio experience to new heights. Immerse yourself in deep, impactful bass with this advanced subwoofer that is sure to impress even the most discerning audiophiles. Upgrade your sound system with the Martin Audio SX215 for a truly immersive listening experience.Product Specifications Type: Dual Driver, Direct radiating subwoofer Crossover Frequency: 100Hz Frequency Response 4π (5): 45Hz - 100Hz ± 3dB, -10dB @ 36Hz Drivers: LF: 15” with 4” Voice coil, Ferrite Motor Sensitivity: (2W 1m half space) 106dB (1W 1m half space) 103dB Nominal Impedance: 8 Ohms Rated Power: AES 2000W, PEAK 8000W Maximum SPL (System): 130dB continuous, 142dB peak Dispersion: Omni-Directional/ or Cardioid (paired) Connectors: 2 x NL4 Pin Connections (INPUT): 1+/- or 2+/- Pin Connections (LINK): 1+/- and 2+/- Dimensions: (W) 500mm, (H) 961mm, (D) 679mm (807mm with Casters) (W) 37.83 ins, (H) 18.23ins, (D) 26.73ins (31.77ins with Casters) Weight: 64kg (141 lbs)

Read more less

Experience powerful and precise bass performance with the Martin Audio SXC115 1x15" Compact High-Performance CARDIOID Subwoofer. This sophisticated subwoofer is meticulously designed for touring sound and installations, offering exceptional sound quality in a compact form.Crafted with a front-facing 15” voice coil driver and a rear-facing 12” voice coil driver, each powered by separate amplifier channels and DSP, the SXC115 ensures optimum bass delivery with clarity and depth. With a cardioid dispersion pattern and 28dB rear rejection at 75Hz, this subwoofer focuses on maximising front radiation while minimising unwanted rear radiation, creating a clean and controlled sound experience.The SXC115's tour-grade plywood enclosure houses the drivers in separate chambers with optimised bass reflex porting, providing a powerful low-frequency punch that is ideal for various applications. Whether you are looking to enhance live sound reinforcement, upgrade your nightclub's audio system, or elevate your theatre experience, this subwoofer delivers exceptional performance in any setting.Designed to work seamlessly with WPM line arrays or Martin Audio point source systems, the SXC115 offers versatile usage options including stacking, flying individually, or using it singly. With the recommended iK42 amplifier, the DSP parameters are optimised to maximise rear rejection, ensuring precise and impactful low-frequency response while keeping unwanted reverberations at bay.Unleash the full potential of your sound system with the Martin Audio SXC115 subwoofer, and elevate your audio experience to new heights.Product Specifications TYPE: Compact, cardioid subwoofer FREQUENCY RESPONSE: 44Hz – 150Hz ±3dB, -10dB @ 36Hz DRIVERS: 15” (380mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone 12” (300mm)/4” (100mm) voice coil, long excursion, neodymium magnet, waterproof cone RATED POWER: 15”: 1000W AES, 4000W peak 12”: 800W AES, 3200W peak SENSITIVITY: 101dB MAXIMUM SPL: 137dB peak NOMINAL IMPEDANCE: 15”: 8 ohms 12”: 8 ohms DISPERSION (-6DB): Cardioid ENCLOSURE: Multi-laminate birch ply FINISH: Textured black paint PROTECTIVE GRILLE: Black HEX perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS (INPUT): 15”: +1, -1; 12”: +2, -2 PINS CONNECTIONS (LINK): 15”: +1, -1; 12”: +2, -2 FITTINGS: Two skids on base, with mating channels on top M20 top-mounted thread plate for pole mounting Two bar handles on each side 16 x M10 mounting points 16 x M8 inserts for optional castors DIMENSIONS (INCL SKIDS): (W) 500mm x (H) 550mm x (D) 811mm (939mm incl castors) (W) 19.69in x (H) 21.67in x (D) 31.92in (36.96in incl castors) WEIGHT: 53kg (117lbs), 56kg (124 lbs) incl castors

Read more less

Experience the unmatched power of the Martin Audio SXC118 1x18" Compact High-Performance CARDIOID Subwoofer 1000W. Designed for the most demanding sound environments, this compact subwoofer is equipped with a front-facing 18” voice coil driver and a rear-facing 14” driver, each independently powered for precision performance.With a cardioid dispersion pattern and exceptional 28dB rear rejection at 75Hz, the SXC118 ensures that low frequencies are directed precisely where they are needed, preventing unwanted spill onto stages or walls. The cardioid design provides unparalleled control over the sound output, resulting in a cleaner, more defined bass response.Crafted from tour-grade plywood and finished with a durable textured paint, the SXC118 is ready for the rigours of live sound reinforcement and fixed installations. Whether used in live event venues, nightclubs, theatres, or corporate AV events, this subwoofer delivers high output capability and exceptional clarity.Integrate the Martin Audio SXC118 into your sound system for acoustically challenging rooms, outdoor entertainment areas, and large-scale venues. Maximise your low-frequency impact with the innovative design of this cardioid subwoofer, ensuring that your audience experiences nothing but the purest bass tones.Incorporate the Martin Audio SXC118 into your setup today and elevate your sound experience to new heights. Ideal for professionals seeking precision and power in their sound reinforcement, this compact subwoofer sets a new standard for performance and reliability.Product Specifications TYPE: Compact, cardioid subwoofer FREQUENCY RESPONSE: 43Hz – 150Hz ±3dB, -10dB @ 34Hz DRIVERS: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone 14” (356mm)/3.5” (88mm) voice coil, long excursion, neodymium magnet, waterproof cone RATED POWER: 18”: 1000W AES, 4000W peak 14”: 800W AES, 3200W peak SENSITIVITY: 104dB MAXIMUM SPL: 140dB peak NOMINAL IMPEDANCE: 18”: 8Ω 14”: 8Ω DISPERSION (-6DB): Cardioid ENCLOSURE: Multi-laminate birch and poplar ply FINISH: Textured black paint PROTECTIVE GRILLE: Black HEX perforated steel CONNECTORS: 2 x NL4 PIN CONNECTIONS (INPUT): 18”: +1, -1; 14”: +2, -2 PINS CONNECTIONS (LINK): 18”: +1, -1; 14”: +2, -2 FITTINGS: Two skids on base, with mating channels on top M20 top-mounted thread plate for pole mounting Two bar handles on each side Four fittings for optional transit cover 16 x M10 Mounting Points 16 x M8 inserts for optional castors Two bar handles on each side DIMENSIONS (INCL SKIDS): (W) 635mm x (H) 603mm x (D) 824mm (952mm incl castors) (W) 25in x (H) 23.7in x (D) 32.4in (37.5in incl castors) WEIGHT: 69kg (152lbs) 73kg (161lbs) incl castors

Read more less