Introducing the JBL CBT 200LA-1 WH 32x2" Array Column Speaker in stunning white! Experience the pinnacle of audio technology with this 200 cm tall column speaker that boasts an array of thirty-two 50 mm (2 in) drivers for unparalleled sound coverage. The patented Constant Beamwidth Technology™ ensures consistent coverage up to the highest frequencies, eliminating the issues of vertical beaming and uneven sound distribution that plague other speakers.With the ability to switch between 30° and 15° vertical coverage, this speaker offers versatility in catering to medium or long-throw applications. The Asymmetrical Progressive-Gradient setting directs sound towards the far reaches of your space, ensuring a harmonious listening experience from front to back. Dynamic Sonic-Guard™ technology provides low-audibility overload protection, further enhancing the longevity and reliability of this speaker.In addition to its exceptional performance capabilities, the CBT 200LA-1 comes with a swivel (pan)/tilt wall bracket for easy installation and adjustment. The built-in 70V/100V transformers provide flexibility in setup configurations, while the direct capability ensures seamless integration into your existing audio system.Perfect for a wide range of applications thanks to its narrow width of 98.5 mm (3.8 in), the JBL CBT 200LA-1 WH 32x2" Array Column Speaker in white is not only a powerhouse of sound but also a sleek addition to any space. Elevate your sound experience with this cutting-edge line array column speaker that redefines what is possible in audio technology.Product Specifications General Components: Thirty-two 50 mm (2 in) Full-Range Drivers Frequency Range (-10 dB): 80 Hz – 20 kHz Frequency Response (±3 dB): 130 Hz – 18 kHz (narrow coverage, music mode setting) Coverage - Vertical Narrow Mode: 15° (500 Hz – 16 kHz, +15°/-2° [<60° down to 220 Hz, <90° down to 140 Hz]) Broad Mode: 30° (400 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, < 90° down to 140 Hz]) Asymmetrical Progressive-Gradient Mode: (Top speaker module set at “Narrow” and bottom speaker module at “Broad”, for “J-type” coverage, sending higher sound levels toward the far area of the listening space): 22.°(+7° from aiming axis up; -15° from aiming axis down, 300 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, <90° down to 140 Hz]) Coverage - Horizontal150° (ave, 1 kHz – 4 kHz, ±20°) Sensitivity - Narrow (speech mode): 95 dB (2 kHz – 5 kHz) (music mode): 92 dB (150 Hz – 18 kHz) Sensitivity - Broad (speech mode): 93 dB (2 kHz – 5 kHz) (music mode): 90 dB (150 Hz– 18 kHz) Sensitivity - Asymmetrical Progressive-Gradient Mode (on-axis): (speech mode): 94 dB (2 kHz – 5 kHz) (music mode): 91 dB (150 Hz – 18 kHz) Nominal Impedance (direct): 8Ω per half (top and bottom) for 4 ohms total (in thru mode). Min-Z for system = 2.9Ω. Hookup: Ensure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended. Power Capacity (thru setting): 650W (2600W peak), 2 hrs 400W (1600W peak) 100 hrs Max SPL - Narrow: (speech mode): 123 dB cont ave (129 dB peak) (music mode): 120 dB cont ave (126 dB peak) Max SPL - Broad: (speech mode): 121 dB cont ave (127 dB peak) (music mode): 118 dB cont ave (124 dB peak) Max SPL - Asymmetrical Progressive-Gradient Mode (on-axis): (speech mode): 122 dB cont ave (128 dB peak) (music mode): 119 dB cont ave (125 dB peak) 70V/100V Transformer Type: Set individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (with top & bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4Ω. Max. insertion loss less than 1 dB at any tap. Enclosure: Fiberglass reinforced ABS cabinet, painted aluminum grille Connectors: Two (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2) Outdoor Capability: IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. Configuration: Two pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed. Insert Points: 28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate). Mounting: Included swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 brackets Physical & Dimensions Height: 2000mm Width: 98.5mm Depth: 153mm Weight: 14.6kg
Read more less
