Wireless Handheld Microphone Systems

Experience professional-grade audio performance with the Electro-Voice R300-HD/E CH70 Handheld Wireless Microphone System. This robust UHF system features the durable HT-300 metal handheld transmitter and the versatile PL22 dynamic microphone element. The cardioid pickup pattern of the microphone ensures excellent sound quality, making it ideal for singers, public speakers, and event hosts alike. The receiver's dual antenna diversity minimises signal dropouts, while the rugged metal construction ensures reliability in any setting. ClearScan technology and EZsync channel setup simplify operation, allowing you to focus on your performance. With a 14-hour battery life, this system is designed to meet the demands of professionals. Key Features:- ClearScan automatically finds the clearest channel- EZsync one-step channel setup- PL22 cardioid dynamic microphone element- 14-hour battery life from two AA alkaline batteries- Rugged metal transmitter and receiver chassis- Dual antenna diversity for signal reliabilityProduct Specifications Receiver Type: Synthesized PLL Frequency Range (RF): E Band 850 – 865 MHz Number of Channels: 32 Modulation: ± 40 kHz Diversity: True Antenna RF Sensitivity: <1.0 μV for 12 dB SINAD Image Rejection: > 55 dB Squelch: Tone Code plus Amplitude Power Requirements: 12–16 VDC, 500mA max Operating Temperature: 5°C to 45°C (41°F to 113°F) Dimensions: 43 mm H x 206 mm W x 210 mm D (1.72 in H x 7.8 in W x 8.0 in D) Audio Parameters: Frequency Response: 80 Hz – 18 kHz ± 2 dB Balanced Output: 20 dBV (max @ 40 kHz deviation) Unbalanced Output: Adjustable 8 mV to 0.755V RMS Distortion: < 1.0%, 0.4% typical (ref 1 kHz, 40 kHz deviation) Signal-to-Noise Ratio: > 100 dB A-Weighted Dynamic Range: > 95 dB HT-300 Transmitter Specifications: Radiated Output: 8 mW typical Back Lit LCD Display: Channel, Frequency, Mute, and Battery Level Microphone Head: Electro-Voice PL22 Cardioid Dynamic TA4F Connector Wiring: Pin 1: Ground Pin 2: Mic Input Pin 3: +5V bias Pin 4: +5V thru 2.2k Ω Power Requirement: Two AA batteries Battery Life (Typical): > 14 hours with AA alkaline typical Handheld Antenna: Internal proprietary Dimensions (Handheld): 26.7 cm (10.57 in) Long

Read more less

Upgrade your vocal performances and presentations with the Electro-Voice RE3-ND76-8M Handheld Wireless Microphone System featuring the ND76 dynamic cardioid microphone capsule. The crisp, clear, and balanced vocal presence of the ND76 capsule is perfect for a wide range of voice applications. Experience quick and simple setup using the RE3 clear frequency scan and sync functions, providing a seamless wireless experience. The robust handheld transmitter and diversity receiver ensure rock-solid system performance, making this UHF wireless set a reliable choice for professionals. The ND76-RC3 Wireless Head with ND76 Capsule offers excellent all-around vocal performance, featuring a large diaphragm dynamic capsule that creates a rich and detailed frequency response. The shock-mounted capsule minimizes handling noise, while the Memraflex grille resists denting for durability. The RE3-HHT Handheld Transmitter boasts a robust metal body, sync function for easy frequency setup, and selectable low and high output power. The RE3-RX Diversity Receiver includes frequency scanning for selecting open frequencies and a sync function that links the transmitter to the receiver for easy setup. Enjoy up to 36 MHz tuning bandwidth for trouble-free operation. Elevate your audio quality with the Electro-Voice RE3-ND76-8M Handheld Wireless Microphone System with ND76 Capsule.Product Features:- Frequency Response: 30 Hz-17 kHz- Polar Pattern: Cardioid- Maximum SPL: 135.5 dB- Impedance: 1000 ohms- Power Requirements: 4-6 VDCProduct Specifications ND76-RC3 Wireless Head with ND76 Capsule Element type: Dynamic neodymium magnet structure Frequency response, close: 30 Hz-17 kHz Frequency response, far: 70 Hz-17 kHz Polar pattern: Cardioid Sensitivity, open circuit voltage @ 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa) Maximum SPL: 135.5 dB SPL (1% THD) Impedance: 1000 ohms Power requirements: 4-8 VDC Polarity: Positive pressure on diaphragm produces positive voltage at center contact relative to ground contact Electrical contact: 3-Ring/3-Pin Threaded coupling: 1.25" diameter, 28 UN-2A thread pitch Finish: Black polyurethane paint Materials: Aluminium, steel, steel wire grille screen Dimensions: Length: 3.6 in. (91 mm) Diameter: 2.0 in. (50.5 mm) Net weight: 6.5 oz (184 g) Shipping weight: 8.4 oz (238 g) RE3-HHT Handheld Transmitter Frequency oscillation mode: Phase-locked loop (PLL) Available band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) * 8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic RF power output: Frequency bands 5L (488-524MHz): Low 10mW / High 50mW 5H (560-596MHz): Low 10mW / High 50mW 6M (653-663MHz): Low 10mW / High 20mW 8M (823-865MHz) 10mW T (803-806MHz): Low 10mW / High 50mW Display by: LCD + LED Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, RF power, auto off, key lock. RF stability: <±10kHz@Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Microphone coupling: 1.25” diameter, 28 UN-2A thread pitch Microphone electrical contact: 3-ring/3-pin Finish: Black polyurethane paint Dimensions (without head): Height: 7.52 in. (191mm) Width at threaded end: 1.46 in. (37mm) Width at control cover: 0.856 in. (22mm) Net weight (without head): 12.2 oz. (346 g) Gross weight (without head): 16.9 oz. (480 g) RE3-RX Diversity Receiver Frequency oscillation mode: Phase-locked loop (PLL) Carrier frequency range: 470 - 865 MHz (tuning bandwidth is band dependent) Band names, tuning bandwidths, and carrier frequency ranges: 5L: 36 MHz (488-524 MHz) 5H: 36 MHz (560-596 MHz) 6M: 10 MHz (653-663 MHz) 8M: (823-865 MHz)* T: 3 MHz (803-806 MHz) * 8M is split into two segments: 823-832MHz: 9MHz 863-865MHz: 2MHz Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion (Thd): <0.6%@1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT) Antenna type: Detachable ½ wave with BNC connector Antenna booster power: DC12 - 15V/100mA Function display by: LCD Contents of display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator. Control functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset. Sync data options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch) Audio frequency output level: Ref：±22.5kHz Dev@1kHz Tone ¼” (6.3mm) Phone Jack：-10dBV XLR Jack：-4dBV(Line)、-24dBV(MIC) Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack Power supply: DC12~15V/500mA Finish: Black polyurethane paint Dimensions: Width: 8.27 in. (210mm) Height: (with feet attached) 1.85 in. (47mm) Height: (without feet attached) 1.73 in. (44mm) Depth: (including antenna jack) 6.89 in. (175mm) Depth: (not including antenna jack) 6.1 in. (155mm) Net weight: 2.71 lb (1.23 kg) Gross weight: 3.28 lb (1.49 kg)

Read more less

Experience exceptional sound quality and reliable performance with the Audio Technica ATW-2120B (U) Handheld Mic System with T220a Cardioid Mic CH38. This system includes the ATW-R2100b receiver for true diversity reception, ensuring superior sound quality with reduced interference. The ATW-T220a handheld dynamic microphone/transmitter, boasting the same element used in the professional PRO 41 dynamic handheld microphone, offers the flexibility of switchable high/low RF power for optimal performance. The Automatic frequency scanning function simplifies setup, while the Tone Lock squelch feature fights off potential interference, providing a seamless user experience. Ideal for live events, presentations, and more.Key Features:- ATW2120B Handheld System- ATW-R2100b receiver with true diversity reception- ATW-T220a handheld cardioid dynamic microphone/transmitter- Automatic frequency scanning- Operating Frequency: U- Tone Lock squelch function fights interferenceProduct Specifications Overall System Operating Frequencies: UHF band 656.125 – 678.500 MHz (D Band) 854.900 – 864.900 MHz (F Band) 487.125 – 506.500 MHz (I Band) 606.500 – 631.000 MHz (U Band) Number Of Channels: 10 total Frequency Stability: ±0.005%, Phase Lock Loop frequency control Modulation Mode: FM Frequency Response: 100 Hz to 15,000 Hz Operating Range: 100 m (300') typical Operating Temperature Range: 41° F (5° C) to 113° F (45° C) Receiver - General Receiving System: True Diversity Image Rejection: 55 dB nominal, 50 dB minimum Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz Sensitivity: 20dBuV (S/N 60dB at 5 kHz deviation, IEC-weighted) Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation) Audio Output Attenuator (ATTN): Unbalanced: 25mV (100k ohms load), 1/4" phone jack Balanced: 50mV (Attenuator; 0dB) 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type Antenna Input: BNC-type 50 Ohms – Bias voltage 12V DC, 60mA each Receiver - Physical & Dimensions Height: 44mm Width: 210mm Depth: 162.2mm Weight: 1kg Handheld Transmitter - General RF Power Output: High: 30mW; Low: 10mW, nominal Spurious Emissions: According to National Regulations Microphone Element: Dynamic, unidirectional Battery Type: Two 1.5V AA alkaline or rechargeable AA NiMH (not included) Current Consumption: 150 mA typical Battery Life: Approximately 9 hours (low), 7 hours (high) Handheld Transmitter - Physical & Dimensions Length: 229mm Diameter: 53.5mm Weight: 221g

Read more less

Unlock professional-grade wireless audio performance with the Audio Technica ATW-1302 System 10 PRO Rack Mount 2.4GHz Handheld Mic System. This sophisticated digital wireless system offers interference-free operation in the 2.4 GHz range, ensuring clear and natural sound quality for your audio needs.The System 10 PRO Rack Mount is designed for simplicity and reliability. With three levels of diversity assurance - frequency, time, and space, this system provides you with seamless communication without interference. The ATW-T1002 handheld dynamic unidirectional microphone/transmitter guarantees a powerful and crystal-clear audio performance for your presentations, speeches, or performances.Featuring a 24-bit / 48kHz digital wireless system, the ATW-1302 System 10 PRO offers no interference, operating outside of DTV or 3G bands. The automatic frequency selection and plug & play setup make it incredibly user-friendly and dependable. Its rackable metal chassis with a removable receiver allows for easy installation and maintenance, while the possibility of pairing each receiver with up to 10 transmitters provides versatile connectivity options.The ATW-1302 System 10 PRO Rack Mount Handheld Mic System is perfect for professionals in need of a high-quality wireless audio solution. Take your sound to the next level with this exceptional digital wireless system.Product Features:- 2.4 GHz 24-bit / 48kHz Digital wireless system- Automatic Frequency Selection- Offers 3 levels of diversity (frequency, time, and space)- Rackable metal chassis with removable receiver- Pair each receiver with up to 10 transmittersProduct Specifications General Operating Frequencies: 2.4 GHz ISM band Frequency Response: 20 Hz to 20 kHz Depending on microphone type Operating Range: 60 m (200') Open range env. with no interfering signals Dynamic Range: >109 dB (A-weighted), typical Total Harmonic Distortion: <0.05% typical Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Audio Sampling: 24 bit / 48 kHz Latency: 3.8 ms Receiving System: Diversity (frequency/time/space) Output Connectors (Microphone)Remote Receiver Connector: RJ45 Link Connector: RJ12 Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external Physical & Dimensions Height: 169.3mm Width: 209.8mm Depth: 169.3mm Weight: 940g Handheld Transmitter RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Battery Type: Two 1.5V AA (not included) Battery Life: >7 hours (alkaline) (Depending on battery type and use pattern) Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter Net Weight: 280g

Read more less

Enhance your performance with the Audio Technica ATW-1102 System 10 2.4GHz Digital Handheld Wireless Mic System. This top-of-the-line wireless system is designed to provide musicians and presenters with unparalleled sound quality, reliability, and ease of use. Experience crystal clear, natural sound reproduction with the 24-bit/48 kHz digital operation, free from interference thanks to the 2.4GHz range. The System 10 offers three levels of diversity assurance - frequency, time, and space - ensuring seamless and interference-free operation.Featuring an ATW-R1100 digital receiver and an ATW-T1002 handheld dynamic cardioid microphone, this system boasts an automatic frequency selection for hassle-free setup, along with state-of-the-art digital technology for reliable performance. With an operating range of 30 meters (100 feet) and a dynamic range exceeding 109 dB, this wireless mic system is the ideal choice for musicians and presenters looking for professional-grade audio quality.Key Features:- Digital 24-bit/48 kHz wireless operation for ultimate sound quality- 2.4 GHz range for interference-free performance- Three levels of diversity assurance: frequency, time, & space- Automatic frequency selection for seamless operation- Easy setup with instantaneous channel selection- AT8456a Quiet-Flex stand clamp included- Suitable for rack mounting with the AT8674 System 10 Rack TrayProduct Specifications General Operating Frequencies: 2.4 GHz ISM band Frequency Response: 20 Hz to 20 kHz Depending on microphone type Operating Range: 30 m (100') Open range env. with no interfering signals Dynamic Range: >109 dB (A-weighted), typical Total Harmonic Distortion: <0.05% typical Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Audio Sampling: 24 bit / 48 kHz Latency: 3.8 ms Receiver Receiving System: Diversity (frequency/time/space) Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external Dimensions: 190 mm W x 46.2 mm Hx 128.5 mm D Weight: 290g Handheld Transmitter RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Battery Type: Two 1.5V AA (not included) Battery Life: >7 hours (alkaline) (Depending on battery type and use pattern) Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter Net Weight: 280g

Read more less

Experience unmatched audio clarity and reliability with the Audio Technica ATW-13 (HH2) AT-One Handheld Wireless Mic System HH2-Band CH70. Ideal for those seeking top-notch performance at an affordable price, this system offers a perfect balance of quality and value. With a user-friendly design and robust construction, the AT-One is your go-to choice for seamless wireless audio transmission.The ATW-13 system provides enhanced flexibility with its 2 x 4 channel frequency plan, allowing you to select up to 4 channels within a group. Equipped with the ATW-T3 cardioid condenser handheld transmitter, this system delivers outstanding sound quality. The long-lasting battery ensures up to 10 hours of continuous use, while the 10mW RF output provides reliable signal transmission.Complete with a practical carrying case, rack-mount kit, and detachable antennae, the Audio Technica ATW-13 (HH2) AT-One Handheld Wireless Mic System HH2-Band CH70 is the perfect choice for professionals and enthusiasts alike.Key Features:- Frequency Band: HH2-Band CH70 (824.4 - 830.85 MHz, 863.3 - 864.7 MHz)- 2 x 4 channel frequency plan for enhanced flexibility- ATW-T3 cardioid condenser handheld transmitter- RF transmission power: 10mW- Up to 10 hours of battery lifeProduct Specifications Overall System Operating Frequencies: 824.4 - 830.85 MHz, 863.3 - 864.7 MHz Number Of Channels: 2 x 4 frequencies Frequency Stability: +/- 0.005%, Phase lock loop frequency control Modulation Mode: FM Frequency Response: 60 Hz - 16 kHz Operating Range: 60m, typical Receiver Receiving System: Antenna switching diversity Image Rejection: 55dB minimum Dynamic Range: HH: 108 dB, BP 103 dB (@ max deviation) Sensitivity: 10dBµV (S/N 60dB @ 20 kHz deviation) Total Harmonic Distortion: <1% - 20 kHz deviation @ 1 kHz Audio Output Unbalanced: -2dBV Audio Output Balanced: 4dBV Output Connectors (Microphone): Balanced: XLRM-type Output Connectors (Instrument): Unbalanced: 6.3 mm mono jack Maximum Output Level: Mic / Line (0 / -20dB) Antenna Input: BNC type, 50 - BIAS voltage 12V DC 100mA each Dimensions: 200 mm x 42 mm x 122 mm (W x H x D) Weight: 418 g without accessories Handheld Transmitter RF Power Output: 10 mW Spurious Emissions: Following national regulatios Microphone Element: Condenser Cardioid Battery Type: Two 1.5V AA alkaline Battery Life: 10 hours - depending on battery type and use pattern Dimensions: 268 mm long - 52 mm (diameter) Accessories Included: Stand clamp

Read more less