Audio Interfaces

Experience unparalleled audio performance with the TASCAM US-16x08 USB Audio / MIDI Interface. Boasting high-quality Ultra-HDDA microphone pre-amps with an impressive EIN of -125 dBu, this interface delivers pristine sound quality suitable for professional recording environments. Capture your music at up to 96kHz/24-bit resolution, ensuring every nuance is faithfully reproduced. Seamlessly compatible with Mac and Windows operating systems, the US-16x08 offers 16-in/8-out audio streaming via USB 2.0 for effortless connectivity to your computer.Enhancing your workflow is the selectable operation mode, allowing you to switch between audio interface and standalone mic preamp functionalities. The built-in DSP mixer empowers you with low-latency digital mixing capabilities, complete with individual compressor and 4-band EQ for each input channel, guaranteeing polished and professional-sounding monitor mixes.Featuring eight Ultra-HDDA microphone preamps and eight balanced line inputs, the US-16x08 provides a versatile recording solution. Additionally, the interface offers MIDI input and output for enhanced connectivity options.Whether you opt for the ergonomic desktop stand or the rack mount setup, the TASCAM US-16x08 caters to a wide range of recording applications, making it a must-have tool for musicians and producers looking to elevate their audio production game. Elevate your recordings with the TASCAM US-16x08 - the ultimate audio interface for demanding professionals.Product Specifications Digital conversion Sampling frequencies: 44.1/48/88.2/96 kHz Quantisation bit depth: 16-bit or 24-bit Analogue audio inputs Mic inputs 1-8 (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance: 2.4 kΩ Rated input level: −68 dBu (0.0003 Vrms, gain knob max.) Rated input level: −12 dBu (0.195 Vrms, gain knob min.) Maximum input level: +8 dBu (1.947 Vrms) Maximum gain: 56 dB Instrument inputs 9–10 (unbalanced, LINE/INST switch set to INST): 6.3mm standard TS jacks (Tip: Hot, Sleeve: GND) Input impedance: 1 MΩ or more Rated input level: −57 dBV (0.0014 Vrms, gain knob max.) Rated input level: −12 dBV (0.251 Vrms, gain knob min.) Maximum input level: +8 dBV (2.512 Vrms) Maximum gain: 45 dB Line inputs 9–10 (unbalanced, LINE/INST switch set to LINE): Standard TRS jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND) Input impedance: 10 kΩ Rated input level: −41 dBu (0.0069 Vrms, gain knob max.) Rated input level: +4 dBu (1.228 Vrms, gain knob min.) Maximum input level: +24 dBu (12.282 Vrms) Maximum gain: 45 dB Line inputs 11–16 (unbalanced, LEVEL switch set to −10 dBV): 6.3mm standard TS jacks (Tip: Hot, Sleeve: GND) Input impedance: 10 kΩ Rated input level: −10 dBV (0.3162 Vrms) Maximum input level: +10 dBV (3.162 Vrms) Line inputs 11–16 (balanced, LEVEL switch set to +4 dBu): Standard TRS jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND) Input impedance: 10 kΩ Rated input level: +4 dBu (1.228 Vrms) Maximum input level: +24 dBu (12.282 Vrms) Analogue audio outputs Line outputs 1–8 (balanced): Standard TRS jack, balanced (Tip: HOT, Ring: COLD, Sleeve: GND) Output impedance: 100 Ω Rated output level: +4 dBu (1.228 Vrms) Maximum output level: +24 dBu (12.277 Vrms) Headphones output: 6.3-mm standard stereo jack Maximum output power: 70 mW + 70 mW (THD+N ≤1 %, 32 Ω) Frequency response (input to headphones output): At 44.1 kHz and 48 kHz: 20 Hz – 20 kHz, ±1.0 dB (JEITA) At 88.2 kHz and 96 kHz: 20 Hz – 40 kHz, ±2.0 dB (JEITA) Other inputs/outputs MIDI input: 5-pin DIN connector Format: Standard MIDI format MIDI output: 5-pin DIN connector Format: Standard MIDI format USB: 4-pin USB B-type Transfer rate: USB 2.0 High Speed (480 MBit/s) Audio performance Mic preamp EIN (equivalent input noise): −125 dBu or more Frequency response (input to line output): At 44.1 kHz and 48 kHz: 20 Hz – 20 kHz, ±0.5 dB (JEITA) At 88.2 kHz and 96 kHz: 20 Hz – 40 kHz, ±0.5 dB (JEITA) S/N ratio: 100 dB or higher (line input to line output, gain knob at minimum, JEITA) Distortion: 0.006% or less (mic/line input to line output, 1 kHz sine wave, nominal input level, maximum output level) Crosstalk: 100 dB or higher (mic/line input to line output, 1 kHz) Computer system requirements Windows: Computer hardware requirements: Windows computer with a USB 2.0 or USB 3.0 port 2 GHz or faster dual core processor (x86) 2 GB or more memory Display resolution at least 1280 x 800 px Supported audio drivers: ASIO 2.0, WDM (MME) Mac: Computer hardware requirements: Apple Mac computer with a USB 2.0 or USB 3.0 port 2 GHz or faster dual core processor 2 GB or more memory Display resolution at least 1280 x 800 px Supported audio drivers: Core Audio, Core MIDI Power supply and other specifications Power supply: Specialized AC adapter (GPE248-120200-Z) Power consumption: 12 W External dimensions: 445 mm × 59 mm × 219 mm Weight: 2.8 kg Operating temperature range: 5–35 °C

Read more less

Experience unparalleled audio performance with the TASCAM SERIES 102i USB Audio/MIDI Interface with DSP Mixer. This compact yet powerful interface is a must-have for guitarists, songwriters, and small studio owners seeking professional-grade recording capabilities. Featuring up to ten audio inputs and two audio outputs, the SERIES 102i delivers crystal-clear audio resolution of up to 192 kHz / 24 bit, ensuring every nuance of your music is captured with exceptional clarity. The high-grade Ultra-HDDA microphone pre-amps with ultra-low noise (EIN: –127 dBu) guarantee pristine sound quality, while the high-quality audio input circuits minimise background noise for a truly professional recording experience.The innovative DSP mixer with built-in digital reverb, compressor, phase invert, and four-band EQ for each channel allows for precise control over your sound, giving you the ability to sculpt your audio to perfection. This powerful onboard processor eliminates latency issues and lightens the load on your computer, ensuring efficient audio processing.Equipped with individually switchable 48-Volt phantom power on XLR inputs and the flexibility to switch TRS inputs to instrument-level for direct guitar or bass recording, the SERIES 102i offers versatility to cater to a variety of recording needs. Gain controls, signal indicators, and peak indicators on each analogue input further enhance your control over the recording process, allowing you to fine-tune your sound effortlessly.Perfect for bringing your musical ideas to life with uncompromising quality, the TASCAM SERIES 102i sets a new standard for audio interfaces. Elevate your recording experience and unleash your creativity with this cutting-edge USB interface.Product Specifications General ratings Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bit depth: 16/24-bit Analogue audio inputs Mic inputs (when the input switch set to MIC/LINE): XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance: 1.5 kΩ Nominal input level: −64 dBu (0.0005 Vrms, GAIN knob at MAX) −6 dBu (0.388 Vrms, GAIN knob at MIN) Maximum input level: +10 dBu (2.45 Vrms) Maximum gain: 58 dB Instrument inputs (when the input switch is set to INST): 6.3-mm standard TS jack (Tip: HOT, Sleeve: GND) Input impedance: ≥1 MΩ Nominal input level: −64 dBV (0.0006 Vrms, GAIN knob at MAX) −6 dBV (0.501 Vrms, GAIN knob at MIN) Maximum input level: +10 dBV (3.162 Vrms) Maximum gain: 58 dB Line inputs (when the input switch set to MIC/LINE): 6.3-mm TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND) Input impedance: 10 kΩ Nominal input level: −54 dBu (0.0015 Vrms, GAIN knob at MAX) +4 dBu (1.228 Vrms, GAIN knob at MIN) Maximum input level: +24 dBu (12.282 Vrms) Maximum gain: 58 dB Analogue audio outputs Line outputs (balanced): 6.3-mm TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND) Output impedance: 230 Ω Nominal output level: +4 dBu (1.228 Vrms) Maximum output level: +20 dBu (7.75 Vrms) Headphone outputs (PHONES): Standard 6.3-mm stereo jack Maximum output power (THD+N ≤0,1 %, 32 Ω): 18 mW + 18 mW Digital audio inputs/outputs OPTICAL IN (S/MUX) connector(s): Optical (JEITA RC-5720C) Signal format: Multi-channel optical format (Supports S/MUX when 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz.) Other inputs and outputs USB: 4-pin USB B-type Transfer rate: USB 2.0 Hi-speed (480 MBit/s) MIDI input: 5-pin DIN Format: Standard MIDI format MIDI output: 5-pin DIN Format: Standard MIDI Audio performance Mic amp EIN (equivalent input noise): ≤−129 dBu Frequency response (mic/line input to computer): At 44.1/48 kHz: 20 Hz – 20 kHz, +0/–0.4 dB (JEITA) At 88.2/96 kHz: 20 Hz – 40 kHz, +0/–0.8 dB (JEITA) At 176.4/192 kHz: 20 Hz – 80 kHz (JEITA) S/N ratio: 109 dB (Mic input to Computer, Gain knob at minimum, 20-kHz low-pass filter, A-weighted) 110 dB (Computer to Line output, MONITOR knob at maximum, 20-kHz low-pass filter, A-weighted) Distortion (THD + N): 0,0016 % (Mic input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter) 0,0023 % (Line input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter) 0,0014 % (Computer to Line output, 1 kHz sine wave, MONITOR knob at maximum, 20-kHz low-pass filter) Crosstalk: ≥100 dB (MIC/LINE input to LINE output 1-2, 1 kHz sine wave, gain knob at minimum) Computer system requirements Windows: Computer hardware requirements: Windows computer with a USB port that supports at least USB 2.0 or USB 3.0 CPU/processor speed: 2 GHz or faster dual core processor (x86) Memory: 2 GB or more Mac: Computer hardware requirements: Mac with a USB port that supports at least USB 2.0 or USB 3.0 CPU/processor speed: 2 GHz or faster dual core processor Memory: 2 GB or more iOS device: Apple iOS device running iOS 10 or later Supported audio drivers: Windows: USB Audio Class 2.0, ASIO 2.2, WDM (MME), MIDI Mac: Core Audio, Core MIDI iOS device: Core Audio for iPhone Power supply and other specifications Power: DC 12 V AC adapter (PS-P1220E) Power consumption: 7.2 W Dimensions (W × H × D): 186 mm × 65 mm × 160 mm Weight: 1.1 kg Permissible operating temperature range: 5–35 °C

Read more less