Products

Experience the pinnacle of live sound mixing with the Yamaha CL5 72 Mono+8 Stereo i/p Digital Console. This console is not just a piece of equipment; it is a masterpiece of innovation and excellence in the world of professional audio engineering.Step into a realm where sonic purity meets unparalleled creative freedom. The Yamaha CL5 is designed to offer a refined and accessible mixing experience, catering to the needs of even the most discerning sound engineers. With industry-leading standards and cutting-edge sound shaping capabilities, this digital console sets a new benchmark for live sound performance.Crafted with a three-section fader layout for seamless control, the Yamaha CL5 is a dream come true for those seeking efficiency and precision in their audio setups. Its built-in Dante technology ensures seamless integration into modern digital audio networks, elevating your sound system to new heights of sophistication.With a sampling frequency rate that guarantees optimal audio performance and minimal signal delay, the Yamaha CL5 delivers an unmatched listening experience. From its 100mm motorised faders to its exceptional frequency response, every detail of this console is meticulously designed to meet the demands of the most dynamic live sound environments.Embrace the future of live sound mixing with the Yamaha CL5 72 Mono+8 Stereo i/p Digital Console. Elevate your audio productions to a level of perfection that only Yamaha can deliver. Unleash your creativity and redefine excellence in live sound engineering with this state-of-the-art digital mixing console. Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to -138dB, -∞dB all faders Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min. Hum & Noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max., -88dBu, Residual output noise, ST master off Dynamic range: 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min. Crosstalk: -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min. Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz Power consumption: 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W Others: Temperature Range: Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C Physical & Dimensions Height: 299mm Width: 1053mm Depth: 667mm Weight: 36kg

Read more less

Experience the pinnacle of live sound mixing with the Yamaha CL5 72 Mono+8 Stereo i/p Digital Console. This console is not just a piece of equipment; it is a masterpiece of innovation and excellence in the world of professional audio engineering.Step into a realm where sonic purity meets unparalleled creative freedom. The Yamaha CL5 is designed to offer a refined and accessible mixing experience, catering to the needs of even the most discerning sound engineers. With industry-leading standards and cutting-edge sound shaping capabilities, this digital console sets a new benchmark for live sound performance.Crafted with a three-section fader layout for seamless control, the Yamaha CL5 is a dream come true for those seeking efficiency and precision in their audio setups. Its built-in Dante technology ensures seamless integration into modern digital audio networks, elevating your sound system to new heights of sophistication.With a sampling frequency rate that guarantees optimal audio performance and minimal signal delay, the Yamaha CL5 delivers an unmatched listening experience. From its 100mm motorised faders to its exceptional frequency response, every detail of this console is meticulously designed to meet the demands of the most dynamic live sound environments.Embrace the future of live sound mixing with the Yamaha CL5 72 Mono+8 Stereo i/p Digital Console. Elevate your audio productions to a level of perfection that only Yamaha can deliver. Unleash your creativity and redefine excellence in live sound engineering with this state-of-the-art digital mixing console. Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to -138dB, -∞dB all faders Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min. Hum & Noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max., -88dBu, Residual output noise, ST master off Dynamic range: 112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min. Crosstalk: -100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min. Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz Power consumption: 170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W Others: Temperature Range: Operating temperature range: 0 - 40°C, Storage temperature range: -20 - 60°C Physical & Dimensions Height: 299mm Width: 1053mm Depth: 667mm Weight: 36kg

Read more less

Introducing the Yamaha DM3S Standard Compact Digital Mixer, a cutting-edge audio solution that combines exceptional sound quality with professional-level features for a range of applications. Featuring a compact design and versatile capabilities, the DM3S Standard is the ultimate tool for achieving superior sound control and seamless operation.🎵 Experience unparalleled audio performance with the Yamaha DM3S, offering a wide array of features to elevate your sound mixing capabilities. 🎵 Boasting a superior 16 mono + 1 stereo + 2 FX return input mixing channels, this digital mixer provides the flexibility and capacity required for dynamic audio production.🎵 With a 8 + 1 fader configuration and a user-friendly 9-inch multi-touch screen, the DM3S ensures intuitive control and easy navigation for seamless operation.🎵 This compact mixer is equipped with essential busses, including 1 Stereo, 6 Mix, 2 FX, and 2 Matrix, supporting input to Matrix functionality for enhanced versatility in audio processing.🎵 The DM3S features 16 Mic/Line inputs (12 XLR + 4 XLR/TRS Phones Combo) and 8 XLR outputs, allowing for comprehensive connectivity and superior signal flow management.🎵 Experience the convenience of USB connectivity with 18 inputs and 18 outputs, offering seamless integration with external devices and recording equipment.🎵 Enhance your mixing experience with 8 DCA groups with Roll-out, 18 Effects, and GEQ on Mix 1-6 and Stereo channels, ensuring precision control over your audio output.🎵 With a sampling rate of 48 kHz/96 kHz, the Yamaha DM3S guarantees crisp, high-fidelity sound reproduction for professional-grade audio production.🎵 Compact in size and weighing just 14.3lbs, this digital mixer is designed for portability without compromising on performance, making it ideal for a wide range of applications.Elevate your audio mixing capabilities with the Yamaha DM3S Standard Compact Digital Mixer and unlock a world of possibilities in sound production and control. Experience exceptional sound quality, versatile features, and intuitive operation with this cutting-edge digital mixer.Product Specifications Outline Mixing Capacity Input Channels: 16 mono + 1 stereo + 2 FX return Mix Buses: 6 Matrices: 2 (Supports input to matrix) Stereo Buses: 1 FX Buses: 2 Cue Buses: 1 General specifications I/O Connectors Analog Input: 16 Mic/Line (12 XLR + 4 XLR/TRS Phones Combo) Analog Output: 8 (XLR) Network: 1 (RJ-45) USB TO HOST: 1 (USB Type-B, USB2.0) USB TO DEVICE: 1 (USB Type-A) Phones: 1 (TRS Phones) DC: 1 (XLR 4pin, DC power IN) User Interface: 1x 9-inch multi-touch screen, 9x faders (8 channels + 1 main), 1x "Touch and Turn" rotary encoder Recording & Playback: PC/Mac: Recording 18 track, Playback 18 track USB storage device: Recording 2 track (USB hard disk / SSD / flash memory), Playback 2 track (USB hard disk / SSD / flash memory) Sampling frequency rate: 96 kHz / 48 kHz Signal delay: Less than 1.3 ms, (CH INPUT to OMNI OUT, Fs=96 kHz) Frequency response: +0.5, -1.0 dB 20 Hz-20 kHz, reference to the nominal output level@1 kHz, INPUT to OMNI OUT Total harmonic distortion: Less than 0.01 % 20 Hz - 20 kHz@+4 dBu into 10 kΩ, INPUT to OMNI OUT, Input Gain= Min Hum & noise level: Equivalent input noise: -126 dBu typ., Input Gain= Max. Residual output noise: -84 dBu, ST main off Dynamic range: 110 dB typ., DA Converter, 106 dB typ., INPUT to OMNI OUT, Input Gain=Min. Crosstalk: -100 dB, adjacent INPUT/OMNI OUT channels, Input Gain= Min. @1 kHz Power requirements: DC24 V/2.5 A, PA-L500 (100 V-240 V, 50 Hz/60 Hz) Power consumption: 43 W Dimensions: W: 320 mm (12.6") H: 140 mm (5.6") D: 455 mm (18.0") Net weight: 6.5 kg (14.3 lb) Operating temperature: 0 - 40 °C Storage temperature: -20 - 60 °C

Read more less

Introducing the Yamaha DM7 Digital Mixer 120 Mono/ 2 Stereo/ 12 Matrix + Dante - a pinnacle of cutting-edge audio technology and unparalleled performance. This versatile digital mixing console is equipped with Dante, ensuring seamless connectivity and outstanding sound quality for your audio mixing needs.Designed with high reliability in mind, the Yamaha DM7 boasts a configuration of 24 + 4 faders, allowing for precise control and flexibility in adjusting audio levels. The console features a 2 x 12" touchscreen along with a 1 x 7" touchscreen, providing an intuitive and user-friendly interface for effortless operation.With 120 mono input mixing channels, 48 buses, and 12 matrix channels, the Yamaha DM7 offers extensive versatility in managing your audio signals. The console is equipped with a total of 28 faders (12, 12, and 4), providing tactile control over your audio mix. Additionally, the DM7 features 32 inputs and 16 outputs for analogue I/O, ensuring seamless integration with a wide range of audio devices.Noteworthy for its dual 12.1" multi-touch screens and a 7" multi-touch screen, the Yamaha DM7 delivers a visually immersive mixing experience, allowing you to access all critical controls and parameters with ease. The inclusion of built-in power supply and redundant power supply further enhances the reliability and convenience of this digital mixer.Ideal for professional audio engineers, live sound technicians, and recording studios, the Yamaha DM7 Compact Digital Mixer sets a new standard in audio mixing technology. Elevate your audio production to new heights with the exceptional performance and versatility of the Yamaha DM7 Digital Mixer.Product Specifications Input mixing channels: 120 mono Buses: 48 Mix + 12 Matrix + 2 Stereo Display: 12.1" multi-touch screen x 2, 7" multi-touch screen x 1 Faders: 28 (12 + 12 + 4) Analog I/O: 32 inputs / 16 outputs Dante: 144 in / 144 out AES/EBU: 2 in / 2 out (with SRC) Slot: PY Slot x 1 USB Audio Interface: 18 in / 18 out Power supply: Redundant power supply built-in Power consumption: 240 W Dimensions (W x H x D): 793 mm x 324 mm x 564 mm (31.3" x 12.8" x 22.2") Net Weight: 23.5 kg (51.8 lb)

Read more less

Experience unparalleled sound quality and seamless operation with the Yamaha DM7C Compact Digital Mixer. This cutting-edge mixing console is equipped with Dante technology, ensuring top-tier audio performance for a wide range of applications. The DM7C boasts a user-friendly interface with its 12 + 4 faders and dual multi-touch screens (1 x 12'' and 1 x 7''), offering intuitive control at your fingertips.Perfect for professional studios, live sound setups, and more, the DM7C is rack-mountable with the optional RK1 rack mount kit for seamless integration into your existing setup. With an impressive 72 mono input channels, 48 mix buses, and 12 matrix buses, this mixer provides unparalleled versatility and flexibility for your sound mixing needs.Let the Yamaha DM7C Compact Digital Mixer elevate your audio production with its exceptional features, including 16 faders, 16 inputs/16 outputs analog I/O, and a powerful Dante interface offering 144 in/out. The addition of a redundant power supply ensures reliability during critical performances.Take your sound mixing to the next level with the Yamaha DM7C Compact Digital Mixer – the ultimate choice for professionals seeking uncompromising quality and performance in their audio production setup.Product Specifications Input mixing channels: 72 mono Buses: 48 Mix + 12 Matrix + 2 Stereo Display: 12.1" multi-touch screen x 1, 7" multitouch screen x 1 Faders: 16 (12 + 4) Analog I/O: 16 inputs / 16 outputs Dante: 144 in / 144 out AES/EBU: 1 out Slot: PY Slot x 1 USB Audio Interface: 18 in / 18 out Power supply: Redundant power supply built-in Power consumption: 240 W Dimensions (W x H x D): 468 mm x 324 mm x 564 mm (18.5" x 12.8" x 22.2") Net Weight: 16.5 kg (36.4 lb)

Read more less

Introducing the Yamaha EMX7 12Ch Lightweight Powered Mixer Amp 710+710W – the pinnacle of sound quality and convenience for musicians, performers, and public speakers. Designed to elevate your sound reinforcement to new heights, this powerful mixer amp combines compact construction with impressive features, making it a must-have for those who demand the best in audio performance.Here's why the Yamaha EMX7 stands out:- **Powerful Amplifier**: With 2x 710W at 4Ω, this mixer ensures your sound is clear and impactful.- **High-Z Input**: Connect guitars or basses directly to channel 4 for added convenience.- **Flex 9 Graphic Equalizer**: Tailor your sound precisely with this comprehensive equalizer.- **Professional Effects**: Explore 24 different effects for added creativity and versatility.- **Yamaha Speaker Presets**: Take advantage of preset settings for Yamaha speakers, ensuring optimal sound output.- **Robust Construction**: The metal chassis guarantees extended operation and durability, perfect for on-the-go performances.- **Portability**: Featuring large handles, this mixer amp is extremely portable without compromising on protection.- **Efficient Design**: Enjoy a universal power supply that eliminates worries about power fluctuations.- **User-Friendly Controls**: From feedback suppressors to 1-knob compression, the EMX7 offers intuitive control over your audio.Whether you're setting up for a gig, event, or presentation, the Yamaha EMX7 provides all the tools you need to mix, process, and deliver your audio just the way you envision. Elevate your performances with this reliable and versatile powered mixer amp.Product Specifications I/O Inputs: TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE) Phantom Power: +48 V Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R] Control and others: FOOT SWITCH : Effect Mute on/off Bus Stereo: 1, AUX: 2 (Including FX) Input Channel Function PAD: 30 dB (CH1-4) Hi-Z: Supported (CH4) HPF: 80 Hz, -12 dB/oct. (CH1–3) COMP: 1-knob COMP (CH1–4) EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving) EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking) EQ LOW: 100 Hz +15 dB / -15 dB (Shelving) On-Board Processors DSP: SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor On-Board Amplifiers Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W Level Meter 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK) Frequency Response Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz Total Harmonic Distortion Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF) Hum & Noise Level Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter) Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter) Crosstalk -85 dB (1 kHz, Measured with 1 kHz band pass filter) Protection Circuit Load protection: DC-fault Amplifier protection: Over heat protection, Over current protection, Integral power protection Power supply protection: Over heat protection, Over current protection Power Requirements AC 100-240V, 50Hz/60Hz Power Consumption 45 W (Idle) / 250 W (1/8 Power) Physical & Dimensions Height: 308mm Width: 465mm Depth: 325mm Weight: 9.5kg

Read more less

Experience top-notch sound mixing with the Yamaha MG06 6-Channel Mixing Console. Designed for the active musician, this mixer is built to withstand the rigours of frequent use, thanks to its durable steel chassis that is both impact resistant and powder-coated. The sleek design not only looks professional but also ensures that no compromises are made on the quality of the final product.The Yamaha MG Series is known for its state-of-the-art design, which includes convection cooling to prevent overheating during long sessions. With the power supply separated from the analog circuitry, you can enjoy a near-silent background noise, resulting in a clean and high-quality output sound.Equipped with 2 mono and 2 stereo inputs, the Yamaha MG06 Mixer offers versatility for various sound mixing needs. The "D-PRE" mic preamps with an inverted Darlington circuit deliver exceptional sound clarity and precision. Additionally, the strategic knob placement above the chassis provides added protection to the circuitry, ensuring durability even in case of accidental drops or mishandling.Whether you are a professional musician, audio engineer, or hobbyist, the Yamaha MG06 6-Channel Mixing Console is a reliable and high-performance tool that will elevate your sound mixing experience to new heights. Achieve professional-grade results with ease and confidence with this exceptional mixer.Product Specifications General 6-Channel Mixing Console Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereo) 1 Stereo Bus “D-PRE” mic preamps with an inverted Darlington circuit XLR balanced outputs PAD switch on mono inputs +48V phantom power Physical & Dimensions Metal chassis Dimensions(W×H×D): 149 mm x 62 mm x 202 mm (5.9"x 2.4"x 7.9") Net Weight: 0.9 kg (1.98 lbs.)

Read more less

Step into the world of professional audio mixing with the Yamaha MG10XU 10-Channel Mixing Console. This innovative console offers unparalleled sound quality and reliability, making it a must-have for any music enthusiast or audio professional.Crafted with precision and expertise, the Yamaha MG10XU boasts 4 microphone inputs and 10 line inputs, providing you with the flexibility to connect a variety of instruments and devices. The inclusion of "D-PRE" mic preamps with an inverted Darlington circuit ensures pristine audio quality, capturing every nuance of your sound with unparalleled clarity.Experience the power of studio-quality preamps and high-grade effects with the SPX algorithm offering 24 programs. Whether you're a musician, sound engineer, or content creator, the Yamaha MG10XU is the perfect tool to elevate your sound to the next level.In addition to its superior audio capabilities, this mixing console also features a user-friendly interface with intuitive controls, making it easy to shape and refine your sound with confidence. The compact and rugged design of the Yamaha MG10XU ensures durability and reliability, whether you're in the studio, on stage, or on the go.With advanced features such as 1-knob compressors, 1 stereo bus, 1 AUX (including FX), and 24-bit/192kHz 2in/2out USB audio functions, the Yamaha MG10XU offers a comprehensive solution for all your mixing needs. Compatible with iPad and including Cubase AI DAW software, this console is a versatile and powerful tool for all your audio projects.Transform your sound experience with the Yamaha MG10XU 10-Channel Mixing Console - where superior craftsmanship, innovation, and cutting-edge technology come together to deliver exceptional audio performance.Product Specifications Outline Mixing capability On-board processors: SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) I/O Phantom power: +48 V Digital I/O: USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit Input Channels Mono[MIC/LINE]: 4 Stereo[LINE]: 3 Output Channels STEREO OUT: 2 MONITOR OUT: 1 PHONES: 1 AUX SEND: 1 Bus Stereo: 1, AUX[FX]: 1 Input Channel Function PAD: 26 dB (Mono) HPF: 80 Hz, 12 dB/oct (Mono) COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] General specifications Total harmonic distortion: 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min Frequency response: +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min Hum & noise level Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) Crosstalk: -83 dB Power requirements: PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha Power consumption: 22.9 W Physical & Dimensions Dimensions (W x H x D): 244 mm (9.6") x 71 mm (2.8") x 294 mm (11.6") Net weight: 2.1 kg (4.63 lbs.)

Read more less

Experience unparalleled audio quality and professional-grade performance with the Yamaha MG10XUF Mixing Console. With a heritage of over a century in superior craftsmanship and innovation, Yamaha embodies excellence in every detail of their products. The MG Series, now in its third iteration, showcases cutting-edge technologies developed for high-end professional consoles, guaranteeing top-tier sound production every time.Here's why the Yamaha MG10XUF stands out:- Enjoy a 10-channel mixing capability, accommodating up to 4 mic inputs and 10 line inputs for versatile audio control.- Benefit from high-quality “D-PRE” mic preamps with an inverted Darlington circuit, ensuring pristine sound reproduction.- The inclusion of 1-knob compressors makes it easy to fine-tune your audio levels effortlessly.- Delve into a world of sonic exploration with the high-grade effects of the SPX algorithm, offering 24 programs for creative sound manipulation.- With 24-bit/192kHz 2in/2out USB audio functions, this mixer is equipped for seamless connectivity and recording capabilities.- The Yamaha MG10XUF is compatible with the iPad, expanding your possibilities for creative audio production.Whether you're in a studio, live music venue, or recording environment, the Yamaha MG10XUF Mixing Console empowers you to shape your sound with confidence. Partnered with the reliable construction and user-friendly interface of the MG Series, this mixer promises unrivalled sound quality and reliability in its class. Elevate your audio productions and performances with the Yamaha MG10XUF - where innovation meets precision.Product Specifications General Mixing capability: On-board processors SPX algorithm: 24 programs PARAMETER control: 1 FOOT SW: 1 (FX RTN CH on/off) I/O Phantom power: +48 V Digital I/O: USB Audio Class 2.0 compliant Sampling Frequency: Max 192 kHz Bit Depth: 24-bit Input Channels Mono[MIC/LINE]: 4 Stereo[LINE]: 3 Output Channels STEREO OUT: 2 MONITOR OUT: 1 PHONES: 1 AUX SEND: 1 Bus: Stereo: 1, AUX[FX]: 1 Total harmonic distortion: 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min Crosstalk: -83 dB Power consumption: 22.9W Physical Width: 275 mm (10.8") Height: 110 mm (4.3") Depth: 390 mm (15.4") Net weight: 3.3 kg (7.3 lbs)

Read more less

Experience the pinnacle of professional sound mixing with the Yamaha MG12 12-Channel Mixing Console. Designed to withstand the rigours of live performances, this mixer boasts a robust steel chassis that is both impact-resistant and powder-coated, ensuring it remains pristine despite any bumps or scratches it may encounter.Crafted with a state-of-the-art design, the Yamaha MG12 features convection cooling technology that prevents overheating during extended use, guaranteeing optimal performance at all times. The separation of the power supply from the analog circuitry results in near-silent background noise, delivering a pure and high-quality sound output that will impress even the most discerning musicians.With 12 channels, including 6 microphone inputs and 12 line inputs, the Yamaha MG12 offers unparalleled versatility for creating dynamic soundscapes. The addition of 2 GROUP Buses and 1 Stereo Bus, along with 2 AUX (including FX), further enhances your mixing capabilities, giving you the freedom to craft your audio with precision.Experience the excellence of the Yamaha MG Series and elevate your sound mixing to new heights. Whether you're a seasoned professional or a passionate enthusiast, trust the Yamaha MG12 to deliver exceptional audio quality and unmatched durability for all your musical endeavours.Product Specifications General 12-Channel Mixing Console Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) 2 GROUP Buses + 1 Stereo Bus 2 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Optional Rack Mount Kit RK-MG12 Available Physical & Dimensions Metal chassis 308 mm x 118 mm x 422 mm (9.6" x 2.8" x 11.6") Net Weight: 4.0 kg (8.8 lbs.)

Read more less

Experience the superior craftsmanship and relentless pursuit of innovation with the Yamaha MG12XU 12-Ch Mixing Console. Crafted by Yamaha, a brand with over a century of legacy in creating world-class musical instruments and professional audio equipment, this mixing console is a true testament to excellence.Equipped with studio-quality preamps, powerful digital processing, and a rugged construction, the Yamaha MG12XU incorporates cutting-edge technologies usually found in high-end professional consoles. Its intuitive interface ensures ease of use, allowing you to effortlessly shape your sound with confidence.Whether you're in a studio, recording environment, or live music setting, the Yamaha MG12XU is designed to deliver peak performance and unparalleled sound quality. With 12 channels, including 6 mic inputs and 12 line inputs, this mixing console offers versatility for various applications.Embrace the Yamaha MG12XU 12-Ch Mixing Console and elevate your audio experience to a whole new level of professional excellence. Ideal for musicians, sound engineers, and audio enthusiasts alike, this mixing console is a pinnacle of quality and reliability in its class.Product Specifications General 12-Channel Mixing Console Max. 6 Mic / 12 Line Inputs (4 mono + 4 stereo) 2 GROUP Buses + 1 Stereo Bus 2 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors High-grade effects: SPX with 24 programs 24-bit / 192kHz 2in / 2out USB Audio functions Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter Includes Cubase Al DAW software download version PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Optional Rack Mount Kit RK-MG12 Available Physical & Dimensions Metal chassis Dimensions(W×H×D): 308 mm x 118 mm x 422 mm (12.1" x 4.6" x 16.6") Net Weight: 4.2 kg (9.3 lbs.)

Read more less

Experience the pinnacle of sound engineering with the Yamaha MG12XUK 12-Channel Mixing Console. Designed for audio professionals and enthusiasts alike, this mixing console is a testament to Yamaha's legacy of excellence in audio technology.Unleash your creativity with up to 12 inputs, including 6 microphone and 12 line inputs, allowing you to craft intricate soundscapes with precision. The "D-PRE" mic preamps with inverted Darlington circuitry deliver pristine audio quality, capturing every nuance of your performance.Take control of your sound with the 1-Knob compressors, effortlessly shaping and enhancing your audio with a single control. The high-grade SPX effects with 24 programs offer a world of sonic possibilities at your fingertips, elevating your mixes to new heights.With its rugged metal chassis and intuitive layout, the Yamaha MG12XUK is built to withstand the demands of professional studio, live music, and recording environments. Whether you're a seasoned audio engineer or a budding musician, this mixing console provides the tools you need to achieve pristine sound quality with confidence.Enhance your audio production capabilities with the included Cubase AI DAW software and compatibility with the iPad, opening up a world of recording possibilities. From its studio-quality preamps to its powerful digital processing, the Yamaha MG12XUK combines cutting-edge technology with a user-friendly interface, making it a must-have for any audio enthusiast serious about their craft. Elevate your sound to a new level of excellence with the Yamaha MG12XUK 12-Channel Mixing Console.Product Specifications Outline Mixing capability On-board processors: SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) I/O Phantom power: +48 V Digital I/O: USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit Input Channels Mono[MIC/LINE]: 6 Stereo[LINE]: 3 Output Channels STEREO OUT: 2 MONITOR OUT: 1 PHONES: 1 AUX SEND: 1 Bus: Stereo: 1, AUX[FX]: 1 Input Channel Function PAD: 26 dB (Mono) HPF: 80 Hz, 12 dB/oct (Mono) COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] General specifications Total harmonic distortion: 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min Frequency response: +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min Hum & noise level Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) Crosstalk: -83 dB Power requirements: PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha Power consumption: 22.9 W Physical & Dimensions Dimensions (W x H x D): 315 mm (12.4") x 91 mm (3.6") x 297mm (11.7") Net weight: 3.0kg(6.62 lbs)

Read more less

Experience professional-grade audio mixing with the Yamaha MG16 16-Channel Mixing Console. Built to withstand the rigours of the music industry, this mixer boasts a robust steel chassis that is impact-resistant and powder-coated, ensuring it can handle the wear and tear of active musicians. The sleek design of the Yamaha MG16 not only exudes elegance but also houses state-of-the-art features. With a convection cooling system, this mixer prevents overheating during long hours of use, providing you with uninterrupted performance. The separation of the power supply from the analog circuitry results in near-silent background noise, guaranteeing a premium audio output.Featuring 16 channels with a maximum of 10 microphone and 16 line inputs, the Yamaha MG16 offers versatility for any audio mixing needs. With 4 GROUP buses, 1 stereo bus, and 4 AUX outputs (including FX), this mixer empowers you to create professional-grade soundscapes with ease. Invest in the Yamaha MG16 16-Channel Mixing Console for a seamless audio mixing experience that delivers exceptional quality and reliability for both live performances and studio recordings. Elevate your audio production with this industry-leading mixer.Product Specifications General 16-Channel Mixing Console Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo) 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Rack Mount Kit Included Physical & Dimensions Metal chassis 444 mm x 130 mm x 500 mm (17.5" x 5.1" x 19.7") 6.6 kg (14.6 lbs.)

Read more less

Step into the world of professional audio excellence with the Yamaha MG16XU 16-Ch Mixing Console. Crafted with superior craftsmanship and unmatched innovation, this mixing console from Yamaha's prestigious MG Series sets a new standard in design excellence. Built with technologies perfected for high-end professional consoles, the Yamaha MG16XU features studio-quality preamps, powerful digital processing, and a robust construction that ensures reliability in any scenario. With 10 microphone inputs and 16 line inputs, this console offers exceptional versatility for a wide range of applications.The intuitive interface of the Yamaha MG16XU makes it a breeze to use, allowing you to focus on your creativity without any technical barriers. Whether you're in a recording studio, a live music venue, or a fixed installation setting, the MG16XU is designed to deliver top-notch performance consistently.Experience the legacy of Yamaha's century-long commitment to excellence in musical instruments and professional audio equipment. Elevate your sound quality, shape your audio with confidence, and enjoy unparalleled reliability with the Yamaha MG16XU 16-Ch Mixing Console. Engage in a world of sonic possibilities with this outstanding addition to your audio setup.Product Specifications General 16-Channel Mixing Console Max. 10 Mic / 16 Line Inputs (8 mono + 4 stereo) 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors High-grade effects: SPX with 24 programs 24-bit/192kHz 2in/2out USB Audio functions Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter Includes Cubase Al DAW software download version PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Rack Mount Kit Included Physical & Dimensions Metal chassis Dimensions(W×H×D): 444 mm x 130 mm x 500 mm (17.5" x 5.1" x 19.7") Net Weight: 6.8 kg (15.0 lbs.)

Read more less

Discover the pinnacle of audio excellence with the Yamaha MG20XU 20-Ch Mixing Console. Merging superior craftsmanship and cutting-edge innovation, this console is the epitome of design excellence. Built on over a century of Yamaha's legacy in crafting world-class musical instruments and professional audio equipment, the MG Series represents the zenith of quality and performance. Equipped with studio-quality preamps, powerful digital processing, and a robust construction, the Yamaha MG20XU ensures unparalleled sound reproduction and reliability. Its intuitive interface makes operation seamless, while its flexible design allows for effortless sound shaping. Whether you are in an installed venue, recording studio, or live performance setting, this mixer guarantees peak performance and exceptional sound quality.The Yamaha MG20XU boasts 20 channels, including 16 microphone inputs and 20 line inputs, offering a wide range of connectivity options. With features like 12 mono and 4 stereo inputs, the mixer provides versatility for various audio setups. Additionally, the inclusion of the SPX digital effects with faders elevates your mixing capabilities to new heights.Embark on a journey of sonic perfection with the Yamaha MG20XU Mixing Console. Experience the precision, reliability, and innovation that have made Yamaha a trusted name in the audio industry for decades. Elevate your sound experience with this outstanding mixing console and unleash your creativity with every mix, performance, or recording.Product Specifications General 20-Channel Mixing Console Max. 16 Mic / 20 Line Inputs (12 mono + 4 stereo) 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX) “D-PRE” mic preamps with an inverted Darlington circuit 1-Knob compressors High-grade effects: SPX with 24 programs 24-bit/192kHz 2in/2out USB Audio functions Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter Includes Cubase AI DAW software download version PAD switch on mono inputs +48V phantom power XLR balanced outputs Internal universal power supply for world-wide use Rack Mount Kit Included Physical & Dimensions Metal chassis Dimensions(W×H×D): 444 mm x 130 mm x 500 m (17.5" x 5.1" x 19.7") Net Weight: 7.1kg (15.7 lbs.)

Read more less

Enhance your Yamaha digital mixing console's capabilities with the Yamaha MY8AD96 8Ch Analogue Input Card featuring a 25-pin D-sub connector. This high-quality 24-bit, 96 kHz eight-channel line-level analogue input card is designed for seamless integration into the option I/O slots of Yamaha digital mixers and mixing engines.With the MY8AD96 Analogue Input Card, you can effortlessly transition from traditional analogue audio formats to standard digital audio and proprietary network protocols. The Mini-YGDAI (Yamaha General Digital Audio Interface) compatibility ensures easy addition of I/O in various audio and network formats to your compatible Yamaha devices equipped with card slots.Experience flexibility at its finest as you harness the power of Mini-YGDAI cards to enhance your audio setup. Whether you're looking to upgrade your existing infrastructure or incorporate the latest digital network technology, the MY8AD96 Analogue Input Card provides the solution. Its 25-pin D-sub connector and 24-bit resolution deliver superior audio performance, making it ideal for professional sound reinforcement applications.Take your audio production to the next level with the Yamaha MY8AD96 8Ch Analogue Input Card - the perfect choice for expanding your system's capabilities and achieving unparalleled sound quality.Product Specifications General I/O: Output x 8 Format: Analog Connector: Euroblock Resolution: 24 bit

Read more less

Enhance your audio setup with the Yamaha NY64-D Dante In/Out Expansion Card for TF Series Consoles. Designed to elevate your audio experience, this I/O expansion card offers a seamless integration for TF series consoles, enabling the transmission and reception of up to 128 channels of uncompressed 48 kHz 24-bit digital audio data through a Dante™ audio network. Key Features: - Unlock the potential of your TF series console with 64 inputs and 64 outputs of 32-bit, 48 kHz uncompressed digital audio signals. - Enjoy the flexibility of simple daisy chaining or opt for redundant connections using the primary and secondary data paths for enhanced reliability. - Stay informed with the various indicators that provide real-time status updates and error notifications, ensuring smooth operation. By pairing the NY64-D with the Tio1608-D I/O, you can create a versatile stage box system with up to 48 inputs and 24 outputs, offering you a comprehensive and professional audio solution. Elevate your audio production capabilities with the Yamaha NY64-D Dante In/Out Expansion Card, where quality and efficiency meet seamlessly.

Read more less

Unleash the power of professional sound reinforcement with the Yamaha PX3 Class D Power Amplifier. Delivering an impressive 2x500W at 4Ω, this amplifier boasts a newly developed Class-D engine with custom LSI for top-notch performance. Equipped with flexible onboard PEQ, crossover, filters, delay, and limiter functions, the PX3 ensures precise audio control. Benefit from Yamaha Speaker presets and utilities for secure operation. The Yamaha PX3 is the go-to choice for versatile power amplification needs.Product Features:- 2x 300W at 8Ω / 2x 500W at 4Ω- Newly developed Class-D amplifier engine with custom LSI- Flexible onboard PEQ, crossover, filters, delay, and limiter functions- Yamaha Speaker presets- Utilities for safe and secure operationProduct Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total Harmonic Distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency Response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) Maximum Input Voltage: +24dBu Input Impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

Read more less

Experience unparalleled power and versatility with the Yamaha PX5 Class D Power Amplifier. This innovative amplifier boasts a newly developed Class-D engine with a custom LSI, delivering 2x800W at 4Ω for crystal-clear sound reproduction. Equipped with onboard DSP, enjoy flexible control over PEQ, crossover, filters, delay, and limiter functions to tailor your audio experience. The Yamaha Speaker presets ensure optimised sound performance, while the utilities guarantee safe and secure operation. Ideal for a wide range of sound reinforcement applications, this power amp offers 2x500W at 8Ω and 2x800W at 4Ω, making it a powerhouse in the audio industry.Key Features:- Power Output: 2x 500W at 8Ω, 2x 800W at 4Ω- Newly developed Class-D amplifier engine with a custom LSI- Onboard DSP for PEQ, crossover, filters, delay, and limiter functions- Yamaha Speaker presets for optimised sound performance- Utilities for safe and secure operationProduct Specifications General Internal Sampling Frequency rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 100dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) 8Ω Volume max /Power Boost mode: 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output portsNeutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line InputXLR-3-31 x2, 1/4 "PHONE(TRS) x2 OthersUSB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power consumption 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 6.9kg

Read more less

Upgrade your sound reinforcement setup with the Yamaha PX8 Class D Power Amplifier. This professional-grade amplifier delivers remarkable power and precision, with 2x1050W output at 4Ω and a newly developed Class-D amplifier engine. Equipped with flexible onboard PEQ, crossover, filters, delay, and limiter functions, this amplifier ensures optimal sound quality tailored to your specific preferences. Also featuring Yamaha Speaker presets, the PX8 offers utilities for safe and secure operation. The Yamaha PX8 Class D Power Amplifier is a versatile and reliable choice for various sound reinforcement environments, providing 800W x 2 at 8Ω and 1050W x 2 at 4Ω. Elevate your audio experience with this powerhouse amplifier.Specifications:- Internal Sampling Frequency Rate: 48kHz- Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)- Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz)- S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu)- Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)- Voltage Gain/Sensitivity: 8Ω Volume max: 32.0dB/+8.3dBu- Maximum input voltage: +24dBu- Input impedance: 20kΩ (Balance), 10kΩ (Unbalance)I/O Connectors:- Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2- Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2- Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update; AC inlet x1 with AC cord clampIndicators:- POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green)Processors:- Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker ProcessorElevate your audio setup with the Yamaha PX8 Class D Power Amplifier!Product Specifications General Internal Sampling Frequency Rate: 48kHz A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz) S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu) Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) Voltage Gain/Sensitivity 8Ω Volume max: 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) Maximum input voltage: +24dBu Input impedance: 20kΩ (Balance), 10kΩ (Unbalance) I/O Connectors Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp Indicators POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature Processors Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay) Latency 1.5 msec (Analog Input to Speakers) Presets 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) Protection Circuit Load protectionPOWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) Amplifier protectionThermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) Power supply protectionThermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown Amplifier Class Class D, Balanced output circuit (BTL) Cooling 16 step variable speed fan x 2, front to rear airflow Power Requirements Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. Power Consumption 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) Physical & Dimensions Height: 88mm Width: 480mm Depth: 388mm Weight: 7.2kg

Read more less

Immerse yourself in a world of unparalleled audio excellence with the Yamaha QL1 32 Mono+8 Stereo i/p Digital Console with Built-in Dante. Designed with the expertise and innovation that Yamaha is renowned for, this digital mixing console delivers a level of refinement that will elevate your live sound experiences.🎵 Built-in Dante Networking: Experience the flexibility of system configuration like never before, allowing you to tailor your setup to your exact requirements with ease.🎵 All-in-One Mixing and Processing: This compact yet powerful console offers a comprehensive solution for small to medium scale live sound productions. From corporate events to installations, the QL1 is your ultimate tool for delivering exceptional audio quality.🎵 Evolved Sound Quality: The QL1 inherits core features and performance from the acclaimed CL series, ensuring a natural, sonically superb sound that will captivate your audience and elevate your performance to new heights.🎵 User-Friendly Operation: Adaptable to any working environment, the QL1 boasts intuitive controls and a streamlined layout that makes mixing a breeze, even in the most demanding scenarios.🎵 Superior Internal Processing: With total harmonic distortion of less than 0.05% and a frequency response that ensures optimum clarity and accuracy, the QL1 guarantees impeccable audio reproduction from input to output.Transform your live sound production with the Yamaha QL1 Digital Console – where cutting-edge technology meets unparalleled performance.Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu, Residual output noise, ST master off Crosstalk: -100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. Power requirements: 100-240V 50/60Hz Power consumption: 135W Physical & Dimensions Height: 272mm Width: 468mm Depth: 562mm Weight: 14.7kg

Read more less

Immerse yourself in a world of unparalleled audio excellence with the Yamaha QL1 32 Mono+8 Stereo i/p Digital Console with Built-in Dante. Designed with the expertise and innovation that Yamaha is renowned for, this digital mixing console delivers a level of refinement that will elevate your live sound experiences.🎵 Built-in Dante Networking: Experience the flexibility of system configuration like never before, allowing you to tailor your setup to your exact requirements with ease.🎵 All-in-One Mixing and Processing: This compact yet powerful console offers a comprehensive solution for small to medium scale live sound productions. From corporate events to installations, the QL1 is your ultimate tool for delivering exceptional audio quality.🎵 Evolved Sound Quality: The QL1 inherits core features and performance from the acclaimed CL series, ensuring a natural, sonically superb sound that will captivate your audience and elevate your performance to new heights.🎵 User-Friendly Operation: Adaptable to any working environment, the QL1 boasts intuitive controls and a streamlined layout that makes mixing a breeze, even in the most demanding scenarios.🎵 Superior Internal Processing: With total harmonic distortion of less than 0.05% and a frequency response that ensures optimum clarity and accuracy, the QL1 guarantees impeccable audio reproduction from input to output.Transform your live sound production with the Yamaha QL1 Digital Console – where cutting-edge technology meets unparalleled performance.Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu, Residual output noise, ST master off Crosstalk: -100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. Power requirements: 100-240V 50/60Hz Power consumption: 135W Physical & Dimensions Height: 272mm Width: 468mm Depth: 562mm Weight: 14.7kg

Read more less

Experience the pinnacle of live digital mixing with the Yamaha QL5 64 Mono+8 Stereo i/p Digital Console with Built-in Dante. Synonymous with excellence, this digital console embodies unrivalled sound quality, superior operability, and exceptional functionality, setting new standards in the industry.Crafted with core features and performance inherited directly from the acclaimed CL series, the QL5 delivers natural sound supported by sonically superb internal processing capabilities. Its operation effortlessly adapts to the demands of any working environment, while the built-in Dante networking allows for flexible system configuration, making it a versatile choice for small to medium scale live sound, corporate speech events, and installations of various kinds.The compact QL series digital mixing consoles epitomise convenience by offering all-in-one mixing, processing, and routing capabilities. With a 32 + 2 fader configuration that accommodates a wide range of channel layouts, the QL5 is a compact console with large-scale capabilities that will elevate your sound production to new heights.Discover the power of seamless integration and precise control with the Yamaha QL5. Whether you're managing a live concert, corporate event, or installation project, this digital console is designed to exceed expectations and deliver impeccable performance every time. Elevate your audio experience with the Yamaha QL5 Digital Console.Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu, Residual output noise, ST master off Crosstalk: -100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. Power requirements: 100-240V 50/60Hz Power consumption: 200W Physical & Dimensions Height: 272mm Width: 828mm Depth: 563mm Weight: 21.8kg

Read more less

Experience the pinnacle of live digital mixing with the Yamaha QL5 64 Mono+8 Stereo i/p Digital Console with Built-in Dante. Synonymous with excellence, this digital console embodies unrivalled sound quality, superior operability, and exceptional functionality, setting new standards in the industry.Crafted with core features and performance inherited directly from the acclaimed CL series, the QL5 delivers natural sound supported by sonically superb internal processing capabilities. Its operation effortlessly adapts to the demands of any working environment, while the built-in Dante networking allows for flexible system configuration, making it a versatile choice for small to medium scale live sound, corporate speech events, and installations of various kinds.The compact QL series digital mixing consoles epitomise convenience by offering all-in-one mixing, processing, and routing capabilities. With a 32 + 2 fader configuration that accommodates a wide range of channel layouts, the QL5 is a compact console with large-scale capabilities that will elevate your sound production to new heights.Discover the power of seamless integration and precise control with the Yamaha QL5. Whether you're managing a live concert, corporate event, or installation project, this digital console is designed to exceed expectations and deliver impeccable performance every time. Elevate your audio experience with the Yamaha QL5 Digital Console.Product Specifications General Sampling frequency rate Internal: 44.1kHz / 48kHz External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) Signal delay: Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz Fader: 100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu, Residual output noise, ST master off Crosstalk: -100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. Power requirements: 100-240V 50/60Hz Power consumption: 200W Physical & Dimensions Height: 272mm Width: 828mm Depth: 563mm Weight: 21.8kg

Read more less

Experience unparalleled audio quality and flexibility with the Yamaha RIO1608D2 Dante Network Rack. Boasting a sleek design and cutting-edge features, this rack is a must-have for professional audio setups. The long-distance Dante network capability allows for seamless audio transmission, while the intuitive display and encoder enhance visibility and operability.Thanks to the remotely controllable internal head amplifiers and gain compensation function, you have precise control over your audio levels. The inclusion of two internal power supply units ensures uninterrupted performance, making this rack ideal for critical applications where reliability is paramount.The Yamaha RIO1608D2 is part of the R Series I/O racks, which utilise the Dante network audio protocol for unmatched flexibility and ease of setup. Whether you are enhancing your mixing console's sonic potential or integrating various system components, this rack delivers natural, musical sound quality.With redundancy options for ultimate reliability, this 3U rack features 16 inputs and 8 outputs, catering to a wide range of I/O requirements. Experience low signal delay, minimal distortion, and exceptional dynamic range, all contributing to a flawless audio experience.Invest in the Yamaha RIO1608D2 Dante Network Rack and elevate your audio setup to new heights. Experience pristine sound reproduction, seamless connectivity, and unmatched reliability for all your professional audio needs. Opt for excellence with Yamaha.Product Specifications General Sampling frequency rate External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% Signal delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. Frequency response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz Dynamic range: 108dB typ., INPUT to OUTPUT, Input Gain = Min Hum & noise level Equivalent input noise: -128dBu typ., Equivalent Input Noise, Input Gain=Max Residual output noise: -88dBu Residual output noise, ST master off Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz Power consumption: 70W Physical & Dimensions Height: 144mm Width: 480mm Depth: 361.5mm Weight: 8.8kg

Read more less

Experience the pinnacle of audio excellence with the Yamaha RIO3224D2 Dante Network Rack. Engineered with precision and expertise, this high-performance I/O Rack unit seamlessly integrates with the Yamaha digital mixing consoles to elevate your sound production to unprecedented levels of clarity and purity. Embrace the cutting-edge Dante network protocol, offering unparalleled flexibility in system setup and configuration. With dual power supply units ensuring maximum reliability by minimising the risk of power loss, and a revamped internal airflow system reducing fan noise to a whisper, the RIO3224D2 is designed for seamless, uninterrupted performance every time.Revolutionise your audio editing capabilities as you directly adjust gain, high-pass filters, and phantom power settings from the I/O Rack interface, all while enjoying the convenience of remote operation via the R Remote software. The Gain Compensation function ensures optimal sound balance, delivering a harmonious and polished audio experience that exceeds expectations.Whether you are a seasoned professional in need of exceptional sonic transparency or an aspiring audio enthusiast aiming for unparalleled quality, the Yamaha RIO3224D2 Dante Network Rack stands as a testament to Yamaha's commitment to delivering the purest and most natural sound. Elevate your audio engineering game and embrace the future of sound technology with the Yamaha RIO3224D2.Product Specifications General Sampling frequency rate External: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm) Signal delay: Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec Total harmonic distortion: Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min. Frequency response: +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz Dynamic range: 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain= Max. Residual output noise: –88 dBu, ST master off Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz Power requirements: 100-240V, 50/60Hz Power consumption: 120W Physical & Dimensions Height: 220mm Width: 480mm Depth: 368mm Weight: 13.5kg

Read more less

Experience the pinnacle of professional sound quality with the Yamaha STAGEPAS 400BT All in One PA System. Delivering a powerful 400W of crystal-clear audio output, this portable PA system is designed to elevate your sound experience to new heights. The high-quality speakers, featuring an 8" woofer and a 1" voice coil compression driver, ensure a dynamic and immersive sound performance.The STAGEPAS 400BT boasts a detachable 8-channel mixer, providing you with versatile audio control options. With 4 mono/line inputs and 4 mono/2 stereo line inputs, this system offers flexibility for various sound setups. The integrated Bluetooth audio streaming feature allows seamless wireless connectivity for streaming your favourite playlists or backing tracks.Enhance your sound with the 1-Knob Master EQ, offering a virtual bass boost for deep and impactful lows. Explore the world of soundscapes with the high-resolution SPX digital reverbs, offering four types of reverbs with parameter control. Say goodbye to unwanted feedback with the onboard feedback suppressor, ensuring a clean and professional sound output.The Yamaha STAGEPAS 400BT is not just a PA system; it is a complete audio solution. With features like switchable stereo/mono inputs, hi-Z inputs, phantom power, monitor and subwoofer outputs, and the option for a reverb footswitch, this system caters to all your audio needs. The powered mixer with two passive speakers delivers a frequency range of 55Hz-20kHz, ensuring every note is heard with clarity.Ideal for musicians, rental companies, schools, and venues, the Yamaha STAGEPAS 400BT All in One PA System is your gateway to exceptional sound quality and unparalleled performance. Elevate your audio game and make every event a memorable one with this powerful and versatile PA system.Product Specifications System System Type: Powered mixer with 2 passive speakers Frequency Range (-10dB): 55Hz-20kHz Maximum SPL (Measured Peak IEC Noise@1m): 125dB SPL / speaker Power Consumption: 30W (Idle), 70W (1/8 Power) Power Requirements: 100V-240V 50Hz/60Hz Dimentions (W x H x D): Speaker 289mm x 472mm x 275mm (11.4" x 18.6" x 10.8"), Mixer 308mm x 180mm x 116mm (12.1" x 7.1" x 4.6") Net weight: 18.3 kg (40.3 lbs) (2 x Speaker 7.7kg + Mixer 2.9kg) Powered Mixer Mixer Mixing: Channels 8 Analogue Inputs: 4 mono mic/line + 4 mono / 2 stereo line Bluetooth Input: Bluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m Channel EQ: 2-band (HIGH Shelving: 8kHz, LOW Shelving: 100Hz) Channel Functions: Hi-Z switch: CH4, ST/MONO switch: CH5/6-7/8 Digital Effects: SPX digital reverb (4 program, parameter control) Output Processing: Feedback suppressor, 1-Knob Master EQ™ Phantom Power: +30V (CH1, 2) Outputs: SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF Control and Others: Reverb foot switch Built in Amplifiers Power Rating (Dynamic): 400W (200W + 200W) Power Rating (Continuous): 360W (180W + 180W) Speaker Type: Two-way bass-relfex speakers Components: LF: 8" (20cm) cone, HF: 1" (2.54cm) voice coil compression driver Coverage Angle: 90° x 60° Floor Monitor Angle: 50° Handle: 1 x Top Pole Socket: 34.8-35.2mm pole socket with StageLok™

Read more less

Step onto the stage with confidence and take your sound to new heights with the Yamaha STAGEPAS 600BT All in One PA System. This powerhouse of a system boasts a remarkable 680W power output split between two high-quality speakers – a 10" woofer and a 1.4" voice coil compression driver. With its detachable 10-channel mixer, comprising of 4 mono/line and 6 mono/3 stereo line inputs, the Yamaha STAGEPAS 600BT offers unparalleled versatility for your audio needs. The inclusion of Bluetooth audio streaming means you can effortlessly connect your devices and play your music wirelessly.Experience superb sound control with the 1-Knob Master EQ featuring a virtual bass boost, along with high-resolution SPX digital reverbs offering four types of reverb with parameter control. The onboard feedback suppressor ensures a clear and crisp sound without any unwanted noise disruptions.Not only does the STAGEPAS 600BT deliver exceptional audio quality, but it also provides convenient features such as switchable stereo/mono inputs, Hi-Z inputs, phantom power, and monitor and subwoofer outputs. Additionally, the optional reverb footswitch enhances your performance capabilities even further.Designed for portability and ease of use, this 680-watt PA system is perfect for musicians, performers, and event organisers looking for a reliable and versatile audio solution. Elevate your sound to the next level with the Yamaha STAGEPAS 600BT and ensure a memorable and professional audio experience every time you step into the spotlight.Product Specifications System System Type: Powered mixer with 2 passive speakers Frequency Range (-10dB): 55Hz-20kHz Maximum SPL (Measured Peak IEC Noise@1m): 129dB SPL / speaker Power Consumption: 35W (Idle), 100W (1/8 Power) Power Requirements: 100V-240V 50Hz/60Hz Dimentions (W x H x D): Speaker 335mm x 545mm x 319mm (13.2" x 21.5" x 12.6"), Mixer 348mm x 197mm x 135mm (13.7" x 7.8" x 5.3") Net weight: 25.6 kg (56.4 lbs) (2 x Speaker 10.9 kg + Mixer 3.8 kg) Powered Mixer Mixer Mixing: Channels 10 Analogue Inputs: 4 mono mic/line + 6 mono / 3 stereo line Bluetooth Input: Bluetooth Ver.4.1, A2DP v1.2, Maximum Range: Approx. 10 m Channel EQ: 3-band (HIGH Shelving: 8kHz, MID peaking: 2.5kHz, LOW Shelving: 100Hz) Channel Functions: Hi-Z switch: CH4, ST/MONO switch: CH5/6-9/10 Digital Effects: SPX digital reverb (4 program, parameter control) Output Processing: Feedback suppressor, 1-Knob Master EQ™ Phantom: Power +30V (CH1, 2) Outputs: SPEAKERS OUT (L, R), MONITOR OUT (L/MONO, R), SUBWOOFER OUT (MONO) with auto HPF Control and Others: Reverb foot switch Built in Amplifiers Power Rating (Dynamic): 680W (340W + 340W) Power Rating (Continuous): 560W (280W + 280W) Speaker Type: Two-way bass-relfex speakers Components: LF: 10" (25cm) cone, HF: 1.4" (3.56cm) voice coil compression driver Coverage Angle: 90° x 60° Floor Monitor Angle: 50° Handle: 1 x Top Pole Socket: 34.8-35.2mm pole socket with StageLok™

Read more less

Experience unparalleled mixing and processing capabilities with the Yamaha TF RACK, the compact rack mount version of the renowned TF1 Series. Designed for small to medium scale live sound events, corporate speeches, installations, and more, the TF-RACK combines intuitive user interface with powerful features to elevate your audio production to new heights.Delve into a world of seamless operation with the TF-RACK's scene memory function, boasting banks A and B with the capacity to store up to 100 scenes each. Say goodbye to tedious EQ adjustments with the innovative 1-knob EQ feature, ensuring improved speed and precision in shaping your sound.Explore a plethora of possibilities with over 100 QuickPro Presets for input channels catering to vocals, drum sets, and more. Tailor your output channels effortlessly with presets designed for speaker systems and in-ear monitors, offering multiple variations to accommodate diverse environments and room sizes.Benefit from the enhanced performance of Yamaha's acclaimed D-PRE microphone preamplifier, now in a convenient, recallable format. The TF-RACK is equipped with eight advanced processing/effect units housing SPX processors, setting new standards in audio production for both recording and live sound applications.With a sampling frequency rate of 48 kHz and signal delay of less than 2.6 ms, the TF-RACK ensures precision and clarity in every mix. Immerse yourself in a harmonious audio experience, with total harmonic distortion of less than 0.05% and a frequency response that delivers exceptional accuracy across the spectrum.Transform your audio setup and elevate your performances with the Yamaha TF RACK - where innovation meets excellence in sound engineering. Experience the future of mixing with Yamaha's expertise at your fingertips.Product Specifcations General Sampling frequency rate: Internal 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω, INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 108 dB typ., INPUT to OMNI OUT, Input Gain=Min. Input channel functions: 8 DCA Groups Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. On-board processors: DSP 8 Effects + 10 GEQ Power requirements: 100–240 V 50/60 Hz Power consumption: 85 W I/O Inputs: 16 mic/line (XLR/TRS combo) + 1 stereo line (RCA pin) Outputs: 16 (8 XLR + 8 TRS phone) Expansion slots: 1 (for NY64-D) Mixing Capacity Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Hum & Noise Level Equivalent input noise–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise–85 dBu, ST master off (Measured with an A-Weight filter) Physical & Dimensions Height: 132mm Width: 480mm Depth: 409mm Weight: 9.2kg

Read more less

Experience unparalleled mixing and processing capabilities with the Yamaha TF RACK, the compact rack mount version of the renowned TF1 Series. Designed for small to medium scale live sound events, corporate speeches, installations, and more, the TF-RACK combines intuitive user interface with powerful features to elevate your audio production to new heights.Delve into a world of seamless operation with the TF-RACK's scene memory function, boasting banks A and B with the capacity to store up to 100 scenes each. Say goodbye to tedious EQ adjustments with the innovative 1-knob EQ feature, ensuring improved speed and precision in shaping your sound.Explore a plethora of possibilities with over 100 QuickPro Presets for input channels catering to vocals, drum sets, and more. Tailor your output channels effortlessly with presets designed for speaker systems and in-ear monitors, offering multiple variations to accommodate diverse environments and room sizes.Benefit from the enhanced performance of Yamaha's acclaimed D-PRE microphone preamplifier, now in a convenient, recallable format. The TF-RACK is equipped with eight advanced processing/effect units housing SPX processors, setting new standards in audio production for both recording and live sound applications.With a sampling frequency rate of 48 kHz and signal delay of less than 2.6 ms, the TF-RACK ensures precision and clarity in every mix. Immerse yourself in a harmonious audio experience, with total harmonic distortion of less than 0.05% and a frequency response that delivers exceptional accuracy across the spectrum.Transform your audio setup and elevate your performances with the Yamaha TF RACK - where innovation meets excellence in sound engineering. Experience the future of mixing with Yamaha's expertise at your fingertips.Product Specifcations General Sampling frequency rate: Internal 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω, INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 108 dB typ., INPUT to OMNI OUT, Input Gain=Min. Input channel functions: 8 DCA Groups Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. On-board processors: DSP 8 Effects + 10 GEQ Power requirements: 100–240 V 50/60 Hz Power consumption: 85 W I/O Inputs: 16 mic/line (XLR/TRS combo) + 1 stereo line (RCA pin) Outputs: 16 (8 XLR + 8 TRS phone) Expansion slots: 1 (for NY64-D) Mixing Capacity Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Hum & Noise Level Equivalent input noise–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise–85 dBu, ST master off (Measured with an A-Weight filter) Physical & Dimensions Height: 132mm Width: 480mm Depth: 409mm Weight: 9.2kg

Read more less

Experience the unparalleled sophistication and versatility of the Yamaha TF1 32 Mono+2 Stereo+2 Return 17 Fader Digital Console. Designed to elevate sound reinforcement to new heights, this compact, portable, and rack-mountable console offers impressive capability for smaller systems. With TouchFlow Operation™ at its core, this digital mixer allows you to respond to the music and artists on stage with unprecedented speed and freedom, delivering a level of refinement that will exceed your expectations. The intuitive user interface, optimised for touch panel operation, ensures that both seasoned engineers and newcomers can achieve the perfect mix effortlessly.Featuring recallable D-PRE™ preamplifiers, the TF1 guarantees sound quality that will satisfy even the most discerning ears in the industry. Whether you are an experienced sound engineer or a novice, the Touch & Turn knob and traditional overview interfaces provide extra control precision for a seamless setup and operation process.Unlock your creative potential with the Yamaha TF1 Digital Console, offering advanced live recording features and seamless operation with high-performance I/O racks. Perfect for a wide range of applications, the TF1 is the ideal choice for those seeking an evolved digital console that combines intuitive control with unmatched creative freedom. Elevate your sound experience with the Yamaha TF1 today.Product Specifications General Sampling frequency rate Internal: 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise: –85 dBu, ST master off (Measured with an A-Weight filter) Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. Power requirements: 100–240 V 50/60 Hz Power consumption: 120 W Physical & Dimensions Height: 225mm Width: 510mm Depth: 599mm Weight: 13.5kg

Read more less

Experience the unparalleled sophistication and versatility of the Yamaha TF1 32 Mono+2 Stereo+2 Return 17 Fader Digital Console. Designed to elevate sound reinforcement to new heights, this compact, portable, and rack-mountable console offers impressive capability for smaller systems. With TouchFlow Operation™ at its core, this digital mixer allows you to respond to the music and artists on stage with unprecedented speed and freedom, delivering a level of refinement that will exceed your expectations. The intuitive user interface, optimised for touch panel operation, ensures that both seasoned engineers and newcomers can achieve the perfect mix effortlessly.Featuring recallable D-PRE™ preamplifiers, the TF1 guarantees sound quality that will satisfy even the most discerning ears in the industry. Whether you are an experienced sound engineer or a novice, the Touch & Turn knob and traditional overview interfaces provide extra control precision for a seamless setup and operation process.Unlock your creative potential with the Yamaha TF1 Digital Console, offering advanced live recording features and seamless operation with high-performance I/O racks. Perfect for a wide range of applications, the TF1 is the ideal choice for those seeking an evolved digital console that combines intuitive control with unmatched creative freedom. Elevate your sound experience with the Yamaha TF1 today.Product Specifications General Sampling frequency rate Internal: 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise: –85 dBu, ST master off (Measured with an A-Weight filter) Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. Power requirements: 100–240 V 50/60 Hz Power consumption: 120 W Physical & Dimensions Height: 225mm Width: 510mm Depth: 599mm Weight: 13.5kg

Read more less

Experience the pinnacle of live sound reinforcement with the Yamaha TF3 40 Mono+2 Stereo+2 Return 25 Fader Digital Console. This compact console offers an abundance of input capacity and hands-on control, all in a portable and rack-mountable design. Enhance your mixing capabilities with the TouchFlow Operation™, a revolutionary feature that allows you to respond to the music and artists on stage with unparalleled speed and freedom. The intuitive user interface, optimised for touch panel operation, provides both experienced engineers and newcomers with the tools to achieve the perfect mix effortlessly. The TF3 is equipped with recallable D-PRE™ preamplifiers that deliver exceptional sound quality, ensuring a professional audio experience that will satisfy even the most discerning ears. Its advanced live recording features, alongside seamless operation with high-performance I/O racks, make this console a versatile choice for a wide range of applications.With the Yamaha TF3, you'll enjoy superior visibility, quick operation, and precise control thanks to its touch & turn knob and innovative design. Elevate your sound engineering to new heights and unleash your creativity with this truly evolved digital console. Welcome to a world where control and refinement meet seamlessly to deliver an unparalleled audio experience.Product Specifications General Sampling frequency rate Internal: 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise: –85 dBu, ST master off (Measured with an A-Weight filter) Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. Power requirements: 100–240 V 50/60 Hz Power consumption: 120 W Physical & Dimensions Height: 225mm Width: 716mm Depth: 599mm Weight: 17kg

Read more less

Experience the pinnacle of live sound reinforcement with the Yamaha TF3 40 Mono+2 Stereo+2 Return 25 Fader Digital Console. This compact console offers an abundance of input capacity and hands-on control, all in a portable and rack-mountable design. Enhance your mixing capabilities with the TouchFlow Operation™, a revolutionary feature that allows you to respond to the music and artists on stage with unparalleled speed and freedom. The intuitive user interface, optimised for touch panel operation, provides both experienced engineers and newcomers with the tools to achieve the perfect mix effortlessly. The TF3 is equipped with recallable D-PRE™ preamplifiers that deliver exceptional sound quality, ensuring a professional audio experience that will satisfy even the most discerning ears. Its advanced live recording features, alongside seamless operation with high-performance I/O racks, make this console a versatile choice for a wide range of applications.With the Yamaha TF3, you'll enjoy superior visibility, quick operation, and precise control thanks to its touch & turn knob and innovative design. Elevate your sound engineering to new heights and unleash your creativity with this truly evolved digital console. Welcome to a world where control and refinement meet seamlessly to deliver an unparalleled audio experience.Product Specifications General Sampling frequency rate Internal: 48 kHz Signal delay: Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz Fader: 100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders Total harmonic distortion: Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 Ω , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) Frequency response: +0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT Dynamic range: 110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. Hum & noise level Equivalent input noise: –128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) Residual output noise: –85 dBu, ST master off (Measured with an A-Weight filter) Crosstalk: –100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. Power requirements: 100–240 V 50/60 Hz Power consumption: 120 W Physical & Dimensions Height: 225mm Width: 716mm Depth: 599mm Weight: 17kg

Read more less