Products

Elevate your audio setup to new heights with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier. Tailored as the ultimate companion for NEXO speakers with DTD Controller support, this 4-channel amplifier is a game-changer for professional audio environments. Boasting a high-efficiency Switch Mode power supply and Amplifier channel design, the DTDAMP4X0.7C ensures unmatched sound quality and reliability for your performances. With comprehensive protection features such as mains over/undervoltage, temperature monitoring, and DC outputs protection, this amplifier offers peace of mind during every use. Despite its powerful capabilities, this lightweight and compact 1U rack unit weighing only 7.5 Kg is perfect for mobile setups. The variable-speed cooling system guarantees quiet operation while enhancing performance. Simplify your setup, unleash your NEXO speakers' full potential, and experience a new level of audio precision with the NEXO DTDAMP4X0.7C 4Ch Power Amplifier.Specifications:- Power: 4x700W @ 4Ω- Weight: 7.5 Kg- Size: 1U RackProduct Specifications General Number of channels: 4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 85 Volts Max. output power (4 x 8 Ohms): 4 x 360 Watts Max. output power (4 x 4 Ohms): 4 x 700 Watts Max. output power (2 bridge x 8 Ohms): 2 x 1400 watts Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +5 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 580 Watts Power consumption 1/4 max. / 4 Ohms: 1100 Watts Physical Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Other Operating temperature range: 0°C - 45 °C CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC

Read more less

Elevate your audio experience to new heights with the NEXO DTDAMP4X1.3C 4Ch Power Amp. Designed as the optimal companion for NEXO speakers backed by the DTD Controller, this power amplifier delivers a robust and crystal-clear sound performance. Featuring 4 channels capable of providing 4x1250W at 4Ω, this amplifier ensures a powerful audio output for your setup. The NEXO DTDAMP4X1.3C offers versatile bridging options allowing channels to be independently bridged two by two, providing flexibility in configuring your audio system. It boasts an ultra-efficient Switch Mode power supply and amplifier channel design for superior performance. The extensive protection features safeguard your equipment against mains over/undervoltage, temperature fluctuations, and DC outputs, ensuring the longevity and safety of your audio system. Ideal for powering mobile setups or fixed installations of NEXO ID and PS Series systems, the NEXO DTDAMP4X1.3C is available in two models: one delivering 4 x 700 Watts and another providing 4 x 1300 Watts at 4 Ohms. Specifications:- Channels: 4- Power Output: 4x1250W @ 4Ω- Bridging Options: Independent bridging two by two- Protection Features: Comprehensive protection against mains over/undervoltage, temperature fluctuations, and DC outputs- Power Supply: Switch Mode- Amplifier Channel Design: High-efficiency designProduct Specifications Power Number of channels:4 x amplifiers channel, 2 by 2 bridgeable Max. output voltage (no Load): 4 x 135 Volts Max. output power (4 x 8 Ohms): 4 x 750 Watts Max. output power (4 x 4 Ohms): 4 x 1300 Watts Max. output power (2 bridge x 8 Ohms): 2 x 2600 Watts Audio Characteristics Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz Input impedance: 10 kOhms Input sensitivity: +8 dBU Nominal Gain: 32 dB Dynamic Range (A-weighted): > 110 dB THD+N: Typical 0.01% Back Panel Features Analog audio inputs: 4 x balanced analog inputs on XLR Power outputs: 4 x SP4 outputs Link switch: To use same XLR input for 2 x adjacent channels Mains sockets: IEC C14 Inlet with secure lock Front Panel Features Switch and knobs: Mains On/Off switch and volume control knob per channel View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel Amplifier status: Amp Ready and Temperature indicator per channels pairs Mains Requirements Mains voltage: Factory set for 120 volts of 230 volts mains operation Power consumption (Idle): 65 Watts Power consumption 1/8 max. / 4 Ohms: 900 Watts Power consumption 1/4 max. / 4 Ohms: 1800 Watts Physical Specifications Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U Weight: 7.5 kg Operating temperature range: 0°C - 45 °C Certifications CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS) Electrical safety certification: CSA, CB, EN60065 EMC certification: EN55103-1 / EN55103-2 / FCC Ordering Information Pre-configured for 230 volts mains: DTDAMP4x1.3C Pre-configured for 120 volts mains: DTDAMP4x1.3U

Read more less

Experience the power of deep, resonant bass with the NEXO eLS18 18" Installation Subwoofer IP55 in sleek black. Engineered with precision, this installation subwoofer features a high-excursion 18-inch woofer that delivers exceptional sound quality, making it the perfect companion to the ePS12 installation loudspeaker.Crafted with a compact design that can be easily stacked or flown together with the ePS12 main speaker, the eLS18 boasts a discrete and easy-to-integrate design that seamlessly blends into any environment. The solid construction, utilising 15mm birch plywood enclosure, ensures durability and longevity.With an IP55 protection level, this subwoofer is built to withstand the elements, making it ideal for both indoor and outdoor installations. The eLS18 is not just a subwoofer - it's a powerhouse of performance. Achieving a peak SPL of 138dB and a frequency range extending down to 32Hz, immerse yourself in rich, immersive bass like never before.Convenience is key with the eLS18, featuring rigging points for easy installation and two pairs of In/Out connectors for seamless connectivity. The comprehensive range of accessories available allows you to deploy the eLS18 in a wide variety of applications, making it a versatile and indispensable addition to your sound setup.Transform your audio experience with the NEXO eLS18 18" Installation Subwoofer IP55. Elevate your sound to new heights with this exceptional subwoofer that combines superior performance, durability, and versatility in one sleek package. Experience the difference with NEXO.Product Specifications Frequency Response @-6 dB: 32 Hz to 150 Hz Sensitivity 1W@1m: 106 dB SPL Nominal Peak SPL@1m: 138 dB Crossover Frequency: 32-85 Hz, 32-120 Hz, 32-150 Hz Nominal Impedance: 8 Ω Recommended Power: 1100 to 1750 Watts / 8 Ohms LF Component: 1 x 18” 8 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 11 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 531mm x 600mm x 671mm (20.9” x 23.6” x 26.4”) Weight: Net: 41 kg (91 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Enhance the sound experience of your installation with the NEXO eLS18 18" Installation Subwoofer IP55 in White. Crafted with precision and expertise, this subwoofer boasts a high-excursion 18-inch woofer that delivers deep, resonant bass tones with exceptional clarity.Designed as the perfect companion to the ePS12 installation loudspeaker, the eLS18 features a compact design that can be easily stacked or flown with the ePS12 main speaker, providing you with versatile installation options for any space. Its discrete and easy-to-integrate design ensures seamless integration into any environment.Constructed with a robust 15mm birch plywood enclosure and boasting an IP55 protection level, the eLS18 is built to withstand the rigours of professional use while maintaining its exceptional performance. The cabinet is protected by a strong polyurethane-based coating, and the Magnelis® front grille is covered by a black UV and fire-resistant cloth, ensuring both durability and a sleek aesthetic.Experience an immersive sound quality with the eLS18, achieving a peak SPL of 138dB and a frequency range extending down to 32Hz. Equipped with convenient rigging points and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover, this subwoofer offers ease of installation and versatility in connectivity.Take your sound system to the next level with the NEXO eLS18 18" Installation Subwoofer IP55. Explore the wide array of accessories available to deploy the eLS18 in various applications, and elevate your audio experience like never before. Ideal for professional installations, this subwoofer is a testament to outstanding craftsmanship and exceptional performance.Product Specifications Frequency Response @-6 dB: 32 Hz to 150 Hz Sensitivity 1W@1m: 106 dB SPL Nominal Peak SPL@1m: 138 dB Crossover Frequency: 32-85 Hz, 32-120 Hz, 32-150 Hz Nominal Impedance: 8 Ω Recommended Power: 1100 to 1750 Watts / 8 Ohms LF Component: 1 x 18” 8 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 11 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 531mm x 600mm x 671mm (20.9” x 23.6” x 26.4”) Weight: Net: 41 kg (91 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO eLS400 12" Installation Subwoofer in sleek IP54 Black - the pinnacle of excellence in sound reinforcement. This subwoofer is meticulously engineered to elevate your audio experience to unparalleled heights. 🔊 Immerse yourself in the deep, rich tones delivered by the high-excursion 12-inch Neodymium driver, perfectly complementing the ePS6 and ePS8 installation loudspeakers. 🔊 Designed for versatility, this subwoofer boasts a compact yet powerful configuration, allowing it to be effortlessly stacked or flown alongside the ePS6 or ePS8 main speakers. 🔊 Crafted with precision using lightweight neodymium drivers and a sturdy baltic birch plywood enclosure, the eLS400 weighs just 14.5kg, making it easily transportable for any setup requirement. 🔊 With an IP54 protection rating, this subwoofer is built to withstand the elements without compromising on performance. 🔊 Experience the seamless integration of the eLS400 into your sound system, thanks to its discrete design and solid construction using 15mm birch plywood. 🔊 Featuring a peak SPL of 130dB and a frequency range extending down to 45Hz, this subwoofer delivers an immersive audio experience like no other. 🔊 From convenient rigging points to versatile connectivity options, the eLS400 is equipped with everything you need to deploy it in a wide range of applications effortlessly. Transform your audio setup with the NEXO eLS400 12" Installation Subwoofer and unleash the true potential of your sound system. Elevate your sound to perfection with this exceptional piece of audio engineering.Product Specifications Frequency Response @-6 dB: 45 Hz to 150 Hz Sensitivity 1W@1m: 102 dB SPL Nominal Peak SPL@1m: 130 dB Crossover Frequency: 45-85 Hz, 45-120 Hz, 45-150 Hz Nominal Impedance: 6 Ω Recommended Power: 450 to 700 Watts / 6 Ohms (requires a 700 to 1000 Watts / 4 Ohms amplifier) Component: 1 x Neodymium 12” 6 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 365mm x 423mm x 450mm (14.4” x 16.7” x 17.7”) Weight: Net: 14.5 kg (32 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP54

Read more less

Enhance your sound system with the NEXO eLS400 12" Installation Subwoofer in IP54 White. This sophisticated subwoofer boasts a high-excursion 12-inch Neodymium driver, delivering powerful and deep bass that will elevate your audio experience to new heights.Designed to complement the ePS6 and ePS8 installation loudspeakers perfectly, the eLS400 is the ideal companion for creating a seamless and immersive sound environment. Its compact design allows for flexible placement options - whether stacked or flown with its companion main speakers, the ePS6 and ePS8.Crafted with precision and attention to detail, the eLS400 features a lightweight yet sturdy construction using a combination of neodymium drivers and 15mm Baltic birch plywood enclosure. The IP54 protection level ensures durability and reliability, making it suitable for various indoor and outdoor applications where weather resistance is essential.With a frequency response ranging from 45 Hz to 150 Hz and a peak SPL of 130dB, the eLS400 guarantees exceptional audio quality that will impress even the most discerning audiophiles. The discreet and easy-to-integrate design, along with convenient rigging points and multiple connector options, make it a versatile choice for a wide range of audio setups.Unleash the full potential of your audio system with the NEXO eLS400 12" Installation Subwoofer. Elevate your sound experience with deep, rich bass and exceptional performance that will immerse you in every beat, note, and sound. Upgrade your audio setup with the eLS400 and take your sound system to the next level.Product Specifications Frequency Response @-6 dB: 45 Hz to 150 Hz Sensitivity 1W@1m: 102 dB SPL Nominal Peak SPL@1m: 130 dB Crossover Frequency: 45-85 Hz, 45-120 Hz, 45-150 Hz Nominal Impedance: 6 Ω Recommended Power: 450 to 700 Watts / 6 Ohms (requires a 700 to 1000 Watts / 4 Ohms amplifier) Component: 1 x Neodymium 12” 6 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: White structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 365mm x 423mm x 450mm (14.4” x 16.7” x 17.7”) Weight: Net: 14.5 kg (32 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP54

Read more less

Experience powerful, precision-engineered bass with the NEXO eLS600 15" Installation Subwoofer IP54 Black. This cutting-edge subwoofer boasts a high-excursion 15-inch woofer, making it the perfect partner for the ePS10 installation loudspeaker. Crafted from robust 15mm Baltic birch plywood and enveloped in a sturdy polyurethane-based coating, the eLS600 is designed for durability.Measuring 423mm high x 531mm wide x 566mm deep and weighing 26.3Kg, this subwoofer features a bass-reflex design that delivers a frequency range extending down to an impressive 40Hz. With a peak SPL of 136dB, the eLS600 ensures a commanding presence in any audio setup. Not just a powerhouse in performance, the eLS600 showcases a sleek black finish and a Magnelis® front grille covered in black UV and fire-resistant cloth. Its discrete design allows for easy integration and deployment, whether stacked or flown with the ePS10 main speaker. Equipped with four pairs of M10 rigging points and two pairs of In/Out connectors on screw terminal blocks, the eLS600 offers versatile connectivity options for seamless installation. With an IP54 protection level, this subwoofer is ready to deliver exceptional sound quality in any environment.Complete your sound system with the NEXO eLS600 15" Installation Subwoofer and immerse yourself in rich, deep bass that elevates your audio experience to new heights. Unleash the power of precise sound replication with this premium installation subwoofer.Product Specifications Frequency Response @-6 dB: 45 Hz to 150 Hz Sensitivity 1W@1m: 105 dB SPL Nominal Peak SPL@1m: 136 dB Crossover Frequency: 40-85 Hz, 40-120 Hz, 40- 150 Hz Nominal Impedance: 4 Ω Recommended Power: 850 to 1350 Watts / 4 Ohms Component: 1 x 15” 4 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 423mm x 531mm x 566mm (16.7” x 20.9” x 22.3”) Weight: Net: 26.3 kg (58 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP54

Read more less

Introducing the NEXO eLS600 15" Installation Subwoofer IP54 White, a powerful addition to your sound system that promises to elevate your audio experience to new heights. Crafted with a high-excursion 15-inch woofer, this subwoofer is the perfect companion to the ePS10 installation loudspeaker, offering a seamless integration that enhances the overall sound output. The compact design allows for versatile placement options, whether stacked or flown with the ePS10 main speaker, providing flexibility in setup configurations.Constructed from 15mm baltic birch plywood, the eLS600 boasts a sturdy build that exudes durability and reliability. Its IP54 protection level ensures peace of mind, even in challenging environments. The sleek design seamlessly blends into any space, offering a discreet yet impactful sound solution.With a frequency range extending down to 40Hz and a peak SPL of 136dB, the eLS600 delivers exceptional performance, ensuring a rich and immersive listening experience. Rigging points and multiple connector options make setup a breeze, while the comprehensive range of accessories expands the deployment possibilities for this subwoofer.Enhance your audio setup with the NEXO eLS600 15" Installation Subwoofer IP54 White, an exceptional choice for venues, events, and installations where superior sound quality is non-negotiable. Experience the difference with the ultimate in subwoofer technology.Product Specifications Frequency Response @-6 dB: 45 Hz to 150 Hz Sensitivity 1W@1m: 105 dB SPL Nominal Peak SPL@1m: 136 dB Crossover Frequency: 40-85 Hz, 40-120 Hz, 40- 150 Hz Nominal Impedance: 4 Ω Recommended Power: 850 to 1350 Watts / 4 Ohms Component: 1 x 15” 4 Ohms long excursion Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 4 x pairs of M10 rigging points (two on each side) Material: 15mm baltic birch plywood body and Magnelis grill Finish: White structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 423mm x 531mm x 566mm (16.7” x 20.9” x 22.3”) Weight: Net: 26.3 kg (58 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP54

Read more less

Experience the pinnacle of audio excellence with the NEXO ePS10 2-Way 10" LF / 1.4" HF Installation Loudspeaker in sleek Black. 🔊 Elevate your sound environment with this high-powered loudspeaker, boasting a remarkable 130 dB peak performance. Whether for fixed installations in commercial spaces or entertainment venues, this versatile speaker delivers exceptional sound quality that captivates audiences.🔊 Crafted from lightweight yet robust 15mm Birch plywood, the ePS10 is designed to withstand the rigours of professional use while maintaining a portable weight of just 14.8kg. 🔊 Featuring NEXO’s innovative Asymmetrical Dispersion Constant Directivity horn design, this speaker ensures an immersive audio experience with a wide coverage area and precise sound projection. The IP55 protection level makes it suitable for outdoor installations, guaranteeing durability and longevity.🔊 With a peak SPL of 130dB and a frequency range spanning from 70Hz to 20kHz, the ePS10 delivers powerful and clear audio performance. The rotatable horn allows for flexible positioning, while the convenient rigging points make installation a breeze.🔊 Boasting a comprehensive range of accessories and a sleek black finish (with custom RAL colours available), the NEXO ePS10 is the perfect solution for a wide variety of fixed installation applications. 🔊 Transform any space into an auditory masterpiece with the NEXO ePS10 2-Way Loudspeaker. Upgrade your sound system today and immerse your audience in an unparalleled audio experience.Product Specifications Frequency Response @-6 dB: 70 Hz to 20 kHz Sensitivity 1W@1m: 101 dB SPL Nominal Peak SPL@1m: 130 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 70 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 500 to 800 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 10” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 531mm x 316mm x 285mm (14.4” x 7.8” x 7.1”) Weight: Net: 14.8 kg (17.9 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Experience unparalleled sound quality and performance with the NEXO ePS10 2-Way 10" LF / 1.4" HF Installation Loudspeaker in striking white finish. Designed for fixed installations, this high-power point source loudspeaker is a true game-changer in the world of audio equipment.Crafted from lightweight yet robust 15mm Birch plywood, the ePS10 boasts a sleek and modern design that seamlessly blends into any environment. With a frequency range of 70Hz to 20kHz and a peak SPL of 130dB, this loudspeaker delivers crystal clear sound with incredible precision.The NEXO's Asymmetrical Dispersion Constant Directivity horn design ensures optimal sound dispersion, while the IP55 protection level guarantees durability and reliability even in challenging conditions. Featuring a 10-inch LF driver and a 1.4-inch HF driver, the ePS10 excels in delivering immersive audio experiences.Versatile and easy to install, the ePS10 comes with a comprehensive range of accessories for seamless deployment in a variety of fixed installation applications. With its convenient rigging points and rotatable horn design, this loudspeaker offers flexibility and convenience like never before.Take your audio setup to the next level with the NEXO ePS10 2-Way Installation Loudspeaker. Elevate your sound experience and immerse yourself in unparalleled clarity and power with this exceptional piece of audio equipment.Product Specifications Frequency Response @-6 dB: 70 Hz to 20 kHz Sensitivity 1W@1m: 101 dB SPL Nominal Peak SPL@1m: 130 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 70 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 500 to 800 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 10” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: White structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 531mm x 316mm x 285mm (14.4” x 7.8” x 7.1”) Weight: Net: 14.8 kg (17.9 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO ePS12 2-Way 12" LF / 1.4" HF Installation Loudspeaker in sleek IP55 Black finish. Elevate your audio experience with this high-powered point source loudspeaker designed specifically for fixed installations. Crafted from lightweight yet durable 15mm Birch plywood, this speaker boasts a robust construction that ensures longevity and exceptional sound quality.Delivering a peak SPL of 133dB and a wide frequency range from 60Hz to 20kHz, the ePS12 showcases a 12-inch LF driver with a 1.4-inch HF driver for immersive sound reproduction. Its innovative Asymmetrical Dispersion Constant Directivity horn design allows for precise audio coverage, while the rotatable horn provides flexibility in directing sound.Designed with versatility in mind, the ePS12 features convenient rigging points on the top, bottom, and back of the cabinet, making installation a breeze. The IP55 protection level ensures durability in various environmental conditions, making it an ideal choice for outdoor installations. With a comprehensive range of accessories available, the ePS12 caters to a wide variety of fixed installation applications, providing endless possibilities for integrating audio solutions. Whether you are looking to enhance your commercial space, venue, or outdoor event, the NEXO ePS12 promises exceptional performance and reliability.Experience the perfect blend of power, precision, and durability with the NEXO ePS12 2-Way Installation Loudspeaker. Immerse yourself in crystal-clear sound like never before. Elevate your audio setup with the NEXO ePS12 today.Product Specifications Frequency Response @-6 dB: 60 Hz to 20 kHz Sensitivity 1W@1m: 103 dB SPL Nominal Peak SPL@1m: 133 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° asymmetrical Crossover Frequency: 60 Hz, 85 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 600 to 950 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 12” 8 Ohms long excursion neodymium driver HF Component: 1.7” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 11 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 600mm x 370mm x 317mm (23.6” x 14.6” x 12.5”) Weight: Net: 18 kg (40 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Enhance your fixed installation audio setup with the NEXO ePS12 2-Way 12" LF / 1.4" HF Installation Loudspeaker in sleek white. This high-performance loudspeaker boasts impressive power, with a peak SPL of 133 dB, guaranteeing an immersive sound experience that captivates any audience.Crafted from lightweight yet durable 15mm Baltic birch plywood, the ePS12 combines a 12-inch LF driver and a 1.7-inch voice coil HF driver in a meticulously designed trapezoidal cabinet. The Asymmetrical Dispersion Constant Directivity horn design ensures optimal sound projection, while the IP55 protection level delivers reliability even in challenging environments.With a frequency range spanning from 60Hz to 20kHz, this loudspeaker offers exceptional clarity across all audio frequencies. The rotatable horn allows for flexible sound dispersion, catering to various installation requirements. Additionally, the convenient rigging points on the cabinet make setup hassle-free.Versatile in its application, the ePS12 is perfect for a wide range of fixed installation scenarios, making it a valuable addition to any professional audio setup. Elevate your audio experience with the NEXO ePS12 and enjoy unparalleled sound quality in a sleek and reliable package.Product Specifications Frequency Response @-6 dB: 60 Hz to 20 kHz Sensitivity 1W@1m: 103 dB SPL Nominal Peak SPL@1m: 133 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° asymmetrical Crossover Frequency: 60 Hz, 85 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 600 to 950 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 12” 8 Ohms long excursion neodymium driver HF Component: 1.7” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 11 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: White Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 600mm x 370mm x 317mm (23.6” x 14.6” x 12.5”) Weight: Net: 18 kg (40 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Experience exceptional audio quality with the NEXO ePS6 2-Way 6" LF / 1.4" HF Installation Loudspeaker in IP55 Black. This cutting-edge loudspeaker is meticulously engineered for fixed installations, boasting a high power output of 125 dB peak and a wide frequency range from 90Hz to 20kHz.Crafted from robust 15 mm Birch plywood, the ePS6 is not only lightweight at 7.1kg but also durable, ensuring longevity in any setting. Its unique Asymmetrical Dispersion Constant Directivity horn design delivers unparalleled sound projection, enhanced by a rotatable asymmetrical horn that allows for precise audio coverage.Designed for versatility, the ePS6 features convenient rigging points on the cabinet top, bottom, and back, making installation a breeze. With IP55 protection, this loudspeaker is suitable for indoor and outdoor use, offering a seamless audio experience in any environment.Whether used in commercial spaces, auditoriums, or houses of worship, the NEXO ePS6 guarantees crystal-clear sound reproduction, thanks to its 6-inch LF driver and 1.4-inch HF driver. Achieving a peak SPL of 125dB, this sleek black loudspeaker is a perfect blend of performance and aesthetics.Take your audio setup to the next level with the NEXO ePS6 - the ultimate choice for discerning audio enthusiasts and professionals alike.Product Specifications Frequency Response @-6 dB: 90 Hz to 20 kHz Sensitivity 1W@1m: 98 dB SPL Nominal Peak SPL@1m: 125 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 90 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 310 to 490 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 6” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 365mm x 198mm x 181mm (14.4” x 7.8” x 7.1”) Weight: Net: 7.1 kg (15.7 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO ePS6 2-Way 6" LF / 1.4" HF Installation Loudspeaker in elegant white finish. Designed for fixed installations, this powerful point source loudspeaker is a pinnacle of innovation and performance. Crafted from robust 15mm Baltic birch plywood, the ePS6 boasts a sleek trapezoidal cabinet that houses a high excursion 6-inch LF driver and a 1.4-inch voice coil HF driver, delivering a peak SPL of 125dB with precision.Immerse yourself in a world of pristine sound with NEXO's Asymmetrical Dispersion Constant Directivity horn design, allowing for a seamless audio experience with a frequency range from 90Hz to 20kHz. Whether you are looking to enhance your commercial space, auditorium, or performance venue, the ePS6's IP55 protection level ensures durability and reliability in various environments.Experience the versatility of the ePS6 with its comprehensive range of accessories for effortless deployment in a wide array of fixed installations. With convenient rigging points on the cabinet top, bottom, and back, setting up your sound system has never been easier. Featuring two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover, the ePS6 is designed for convenience and practicality.The NEXO ePS6 transcends boundaries, offering a combination of high power, lightweight design, and exceptional performance. Elevate your audio experience with this exceptional speaker that not only meets but exceeds industry standards. Choose excellence. Choose the NEXO ePS6 2-Way 6" LF / 1.4" HF Installation Loudspeaker.Product Specifications Frequency Response @-6 dB: 90 Hz to 20 kHz Sensitivity 1W@1m: 98 dB SPL Nominal Peak SPL@1m: 125 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 90 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 310 to 490 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 6” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: White structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 365mm x 198mm x 181mm (14.4” x 7.8” x 7.1”) Weight: Net: 7.1 kg (15.7 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO ePS8 - a sophisticated 2-way installation loudspeaker that delivers a harmonious fusion of power and precision for fixed installations. Crafted with meticulous attention to detail, this high-performance loudspeaker offers a plethora of features that set it apart from the rest.🔊 High power meets refined design: With a peak SPL of 128 dB, the ePS8 is a powerhouse encased in a lightweight 15 mm Birch plywood enclosure, weighing just 8.1kg. Its robust construction ensures durability, making it a reliable choice for any installation setting.🔊 Unrivalled sound dispersion: Featuring NEXO's Asymmetrical Dispersion Constant Directivity horn design, the ePS8 provides an immersive audio experience with a frequency range of 80Hz to 20kHz. The rotatable horn allows for precision vertical and horizontal dispersion, catering to a wide audience with clarity and consistency.🔊 Built for versatility: The ePS8 is not just a speaker; it's a solution. With an IP55 protection level, this loudspeaker is suitable for both indoor and outdoor installations. Whether in a commercial space, place of worship, or event venue, the ePS8 adapts seamlessly to diverse environments.🔊 Precision engineering: The ePS8 boasts an 8-inch LF driver and a 1.4-inch HF driver, meticulously designed for optimal performance. The trapezoidal cabinet design, bass-reflex construction, and asymmetric crossover frequency further enhance its audio capabilities, delivering a captivating sound experience.🔊 Easy installation and connectivity: Equipped with convenient rigging points and multiple In/Out connectors, the ePS8 offers effortless setup and integration. Compatible with a wide range of cables, this loudspeaker ensures a seamless connection in any installation scenario.Elevate your audio experience with the NEXO ePS8 - where innovation meets excellence in sound reproduction. Immerse yourself in crystal-clear audio and unleash the true potential of your fixed installation environment.Product Specifications Frequency Response @-6 dB: 80 Hz to 20 kHz Sensitivity 1W@1m: 100 dB SPL Nominal Peak SPL@1m: 128 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 80 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 350 to 570 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 8” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: Black structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 423mm x 250mm x 227mm (14.4” x 7.8” x 7.1”) Weight: Net: 8.1 kg (17.9 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO ePS8 2-Way 8" LF / 1.4" HF Installation Loudspeaker in IP55 White, a high-performance audio solution crafted for fixed installations. Elevate your sound experience with this point source loudspeaker, boasting a remarkable peak SPL of 128 dB. Crafted from lightweight yet durable 15mm Birch plywood, the ePS8 is designed to deliver exceptional audio quality while offering ease of installation. Its innovative Asymmetrical Dispersion Constant Directivity horn design ensures optimal sound dispersion, coupled with a rotatable feature for tailored audio projection.With a frequency range spanning from 80Hz to 20kHz, the ePS8 accommodates a wide array of audio needs, delivering clear and powerful sound reproduction. The trapezoidal cabinet design, constructed from premium baltic birch plywood, houses an 8-inch LF driver and a 1.4-inch voice coil HF driver, ensuring a harmonious blend of lows and highs.Versatility is key with the ePS8, featuring convenient rigging points on the cabinet for easy installation and two pairs of In/Out connectors for seamless connectivity. The IP55 protection level ensures durability, making it suitable for various fixed installation applications.Transform your audio setup with the NEXO ePS8, where impeccable design meets exceptional performance. Experience the difference that premium quality and precision engineering can make in your sound system. Elevate your audio experience with the ePS8 from NEXO.Product Specifications Frequency Response @-6 dB: 80 Hz to 20 kHz Sensitivity 1W@1m: 100 dB SPL Nominal Peak SPL@1m: 128 dB Vertical Dispersion: +25°/-30° Horizontal Dispersion: 50° to 100° Asymmetrical Crossover Frequency: 80 Hz, 120 Hz Nominal Impedance: 8 Ω Recommended Power: 350 to 570 Watts / 8 Ohms Number of ways: 2 way passive LF Component: 8” 8 Ohms long excursion neodymium driver HF Component: 1.4” diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles) Compatible cables section: Cables from 0.75 mm² to 3.31 mm² (AWG 18 to 12) copper section Compatible cables outside diameter: Cable with maximum outside diameter of 9 mm Rigging points: 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot) Material: 15 mm thick birch plywood body and galvanized grill Finish: White structural paint (RAL9005 or Custom RAL upon request) Front Finish: UV & Fire resistant acoustic fabric Height x Width x Depth: 423mm x 250mm x 227mm (14.4” x 7.8” x 7.1”) Weight: Net: 8.1 kg (17.9 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F) IP Rating: IP55

Read more less

Introducing the NEXO IDS110-T 10" Compact Touring Subwoofer Bass 400W in black – a powerhouse of audio performance in a sleek and compact design. Partnering seamlessly with the NEXO processor, this subwoofer is meticulously engineered to deliver NEXO's renowned sound quality, reliability, and unmatched performance.🔊 Compact yet mighty, this subwoofer is a perfect match for the ID loudspeaker range, offering a punchy sub-bass performance in a compact form factor that measures just 285mm high x 525mm wide x 550mm deep. Its elegant and low-profile design ensures easy integration into a variety of spaces – from walls to staircases or even under furniture.🔊 Featuring an M20 base plate for compatibility with the ID24 loudspeaker and IDT-TVP PA pole adaptor, the NEXO IDS110-T is the ideal choice for those seeking exceptional sound quality and versatility. With handles on the side for convenient transport, this touring version is built for on-the-go professionals who demand nothing but the best in audio quality.🔊 This subwoofer boasts a frequency range from 43Hz to 130Hz (+/- 3dB), ensuring a rich and immersive audio experience. With a sensitivity of 97dB SPL and a nominal peak SPL level of 125dB, the NEXO IDS110-T guarantees impressive performance that truly stands out from the crowd.🔊 Whether you're a sound enthusiast, a professional event planner, or a music connoisseur, the NEXO IDS110-T 10" Compact Touring Subwoofer Bass 400W in black is a must-have addition to your audio arsenal. Elevate your sound experience with NEXO's iconic blend of quality, innovation, and superior performance.Product Specifications General Frequency Range: 43Hz – 130Hz (+/- 3dB) Sensitivity: (1W / 1m) 97dB SPL Nominal Peak: SPL Level (1m) 125dB Peak Crossover Frequency: 85Hz / 120Hz Nominal Impedance: 4Ω Recommended Amplification: 400 to 650W Physical & Dimensions Components: 1x 10’’ - Long excursion Material: Finnish birch plywood Finish: Black structured paint Rigging: 4x M6 Inserts | M20 flange (t version only) Weight: 21 kg – 47 lb Dimensions (H x W x D): 285mm x 525mm x 550m

Read more less

Experience the power of deep, resonating bass with the NEXO L15 15" Subwoofer. Designed as a dedicated partner sub for the P12, this subwoofer extends low-frequency performance down to 40Hz, ensuring a full and immersive sound experience. Equipped with a 15" long-excursion Neodymium driver, the L15 delivers a peak SPL of 139dB, allowing you to feel the music like never before.Versatile in its application, the L15 can be deployed in both standard and cardioid modes, providing flexibility in sound reinforcement setups. Featuring threaded inserts on the back and both sides, this subwoofer allows for easy connection of mounting accessories, ensuring seamless integration into your existing sound system.Crafted from Baltic birch and poplar plywood, the L15 boasts a durable construction that can withstand the rigours of live performances and touring. With a sleek black finish and a steel front grille, this subwoofer exudes a professional and sophisticated look that complements any stage setup.Ideal for FOH and stage monitoring applications, the NEXO L15 is a powerhouse of low-end sound reproduction. Whether used in flown applications, as a drum fill, or in any other setup requiring extended LF performance, this subwoofer delivers exceptional clarity and depth to elevate your audio experience to new heights. Elevate your sound system with the NEXO L15 15" Subwoofer and feel the music come alive.Product Specifications Frequency Response (+6 dB): 40 Hz - 120 Hz Peak SPL Level (1m): 139 dB Peak Operating Voltage: 55Vrms (150Vpeak) Crossover Frequency: 85 Hz - 120 Hz Nominal Impedance: 4Ω Components: 1x 15" – 4 ohms – Long excursion – Neodymium driver Material: Baltic birch / Poplar plywood Finish: Black or white structural paint Front Finish: Steel front grille Fittings: Handles on both sides. Threaded inserts on both sides for connection of mounting accessories. Stand fitting M20. Connector: 2x NL4, 4 poles connectors Weight: 35 kg Height x Width x Depth: 430mm x 650mm x 550mm (16.9" x 25.5" x 21.6")

Read more less

Experience a new level of deep, powerful bass with the NEXO L18 18" Subwoofer with Neodymium Driver in striking black. This dedicated partner subwoofer is meticulously designed to perfectly complement the P15 speaker, creating a seamless audio experience. With a peak SPL of 140dB, the L18 effortlessly extends low-frequency performance down to 32Hz, enriching your sound system with thunderous depth.Crafted with precision, the L18 features a robust 18" neodymium driver housed in a Baltic birch and poplar plywood cabinet. The threaded inserts on the back and sides allow for easy connection of mounting accessories, offering flexibility in setup options. Whether used in standard or cardioid modes, this subwoofer delivers exceptional performance in any configuration.With a frequency range spanning from 32Hz to 120Hz, the NEXO L18 ensures that every bass note is heard and felt with clarity and impact. At 50kg, this substantial subwoofer stands as a powerhouse in both sound and construction, promising durability and reliability in any audio environment.Enhance your sound system with the NEXO L18 18" Subwoofer and immerse yourself in the full spectrum of sound, from pulsating lows to soaring highs. Elevate your audio experience to new heights with NEXO's renowned craftsmanship and flawless integration capabilities.Product Specifications Frequency Response (+6 dB: 32 Hz - 120 Hz Peak SPL Level (1m): 140 dB Peak Recommended Amplifiers: 1550 to 2450 Watts / 4Ω Crossover Frequency: 60 Hz, 85 Hz, 120 Hz Nominal Impedance: 4Ω Components: 1x 18" – 4 ohms – Long excursion – Neodymium driver Connectors: 2x NL4, 4 poles connectors Rigging Points: 1 x Universal accessory fit on each side + 1 x M20 thread for Pole Stand on top Material: Custom made bent plywood of Baltic birch and poplar Finish: Black or white structural paint Front Finish: Steel front grille Weight: 50 kg Height x Width x Depth: 559mm x 680mm x 775 mm (22.0” x 26.8” x 30.5”) Operating Temperature Range: 0°C - 40°C (32°F - 104°F) Storage Temperature Range: -20°C - 60°C (-4°F - 140°F) System Operation Recommended Powering Solution: NXAMP4X2MK2: 1 x L18 per channel Optional Powering Solutions: NXAMP4X1MK2 (Bridged): 1 x L18 per channel NXAMP4X4MK2: Up to 2 x L18 per channel

Read more less

Elevate your audio experience with the NEXO NXAMP4X1MK2 4Ch Power Amp Controller 4x1300W 2U. This powerhouse amplifier boasts cutting-edge features that deliver unparalleled sound quality and precise control. The advanced Array-EQ User EQ allows for up to 8 bands per channel, ensuring a tailored sound experience with every note heard exactly as intended. Equipped with ultra-low distortion Class D amplifiers and 32-bit/96KHz converters, this amplifier produces crystal-clear sound reproduction with solid bass and impressive high-end definition. With two layers of mute options, Voltage and Protection Meters, and seamless integration with three new multi-core DSPs, fine-tuning your audio setup has never been easier. Future-proofed hardware ensures potential firmware updates and continuous relevance over the years. Take your sound system to the next level with the NEXO NXAMP4X1MK2 Power Amp Controller.Specifications:- Power: 4x1300W- Amplifier Type: Class D- Number of Channels: 4- EQ Bands per Channel: Up to 8- Converters: 32-bit/96KHz- Signal Processing: 64-bit- Interface: Remote Control- Connectivity: Versatile OptionsProduct Specifications Power Specifications Number of amplifiers channels: 4 x amplifiers channels, 2 by 2 bridgeable Max. output voltage (no load): 4 x 105 Volts 4 x 140 Volts Max. output power (4 channels mode/8 Ohms load per channel): 4 x 600 Watts 4 x 1200 Watts Max. output power (4 channels mode/4 Ohms load per channel): 4 x 900 Watts 4 x 1900 Watts Max. output power (4 channels mode/2 Ohms load per channel): 4 x 1300 Watts 4 x 2500 Watts Max. output power (2 channels mode/8 Ohms load per channel): 2 x 1800 Watts 2 x 3800 Watts Max. output power (2 channels mode/4 Ohms load per channel): 2 x 2600 Watts 2 x 5000 Watts Power consumption (Standby): 10 Watts Power consumption (Idle): 200 Watts Input to Power Out Frequency response: +/-0.5 dB from 10 Hz to 20 KHz Input Impedance / Max. level: 22 K Ω / +25 dBu Dynamic Range / TDH + N: 107 dB unweighted / Typical 0.1% on a flat setup Latency: 550 us on a flat setup Audio AD and DA Converters: 32 bits @ 96 KHz Processing: 3 x multicore 64 bits processing DSPs Back Panel Features Analogue audio inputs: 4 x balanced analogue inputs on XLR3 Power outputs: 4 x Neutrik Speakon NL-4 outputs RS232 port: 1 x DB-9 connector dedicated for DPU connection GPIO port: 1 x DB-25 connector with 5 x inputs and 8 x outputs or for DMU connection Expansion slot: For networking and digital audio cards, 4 x digital audio inputs and remote control Mains sockets: 1 x Neutrik Powercon NAC3 (1 x 20 A) User Interface And Controls Front panel buttons and knobs: Rotary Encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGA, 480 x 272 Mains Requirements Mains voltage: Universal Power Supply with Active PFC 100 - 240 Volts (50/60/Hz) Power consumption 1/4 max. 2 Ohms: 1900 Watts 3500 Watts Physical & Dimensions Height: 2U 19" Rack Depth: 506 mm Weight: 15.7 Kg Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Experience the pinnacle of sound quality with the NEXO NXAMP4X2MK2 4Ch Power Amp Controller. This powerhouse of a power amp controller is a collaborative creation between NEXO and Yamaha, designed to ensure top-notch sound quality for NEXO loudspeaker systems. Boasting cutting-edge technology, this controller features 4 ultra-low distortion Class D amplifiers, each delivering a whopping 2500 Watts of power, setting a new standard in sound reinforcement.The user-friendly interface of the NEXO NXAMP4X2MK2, with all essential parameters easily accessible via a large colour touchscreen on the front panel, provides a seamless setup experience for both fixed installations and touring. Elevate your sound system with this power amp controller and immerse your audience in a whole new level of audio excellence.Key Specifications:- Brand: NEXO- Power: 4x2500W- Amplifier Type: Class D- Interface: Colour touchscreen- Application: Fixed installations, touringProduct Specifications Power Specifications: Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 140 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1200 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 2500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 3800 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 5000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 16 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Lantency: 550 us on a flat setup Audio AD and DA converters: 32-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs Back Panel features: Analogue audio inputs: 4x balanced analogue inputs on XLR3 Power outputs: 4×Neutrik Speakon NL-4 outputs RS232 port: 1×DB-9 connector dedicated for DPU connection GPIO port: 1ｘDB-25 connector with 5x Inputs and 8x Outputs for DMU connection Expansion slot: For networking and digital audio cards, 4x digital audio inputs and remote control Main sockets: 1x Neutrik Powercon NAC3 (1x 20 A) User interface and controls: Front panel buttons and knobs: Rotary encoder with push and backlight, tactile screen Display: 4.3 inches diagonal colour display, WQVGZ, 480 x 272 Main requirements: Mains voltage: Universal power supply with active PFC 100-240 Volts (50/60 Hz) Mains voltage: Power consumption（1/4 max 2 Ω）: 3500 W Dimensions and Certifications: Dimensions: 2U 19" rack, 502mm / 20" depth, 16.1 kg / 35.3 lbs weight Electrical safety certification: cULus, CB (CE), CCC, PSE, KC EMC certification: CE, FCC Green status: Compliant with ROHS directive

Read more less

Experience unparalleled sound quality with the NEXO NXAMP4X4C MK2 4Ch Power Amp and Controller. Developed through the exceptional collaboration between NEXO and Yamaha, this state-of-the-art device brings a revolution in audio performance. Delivering a robust 4 x 4500 Watts output, this 4U unit features advanced signal processing and ultra-low distortion Class D amplifiers, ensuring an exceptional auditory experience. The large colour touchscreen on the front panel provides easy access to all essential parameters, making setup effortless. Whether for fixed installations or touring, this powered controller offers flexibility, convenience, efficiency. Elevate your sound system to new heights with the NEXO NXAMP4X4C MK2, providing remarkable clarity and detail in sound reproduction. With 24-bit/96KHz converters and 64-bit signal processing, enjoy articulate and rich performance from solid bass to impressive high-end definition. Even at low volumes, the sound remains transparent and pure, enhancing the audience experience. Specifications:- Power output: 4 x 4500 Watts- Signal Processing: 64-bit- Converters: 24-bit/96KHz- Amplifier Type: Class D- Touchscreen: Large Colour Touchscreen- Unit Size: 4UProduct Specifications Power Specifications Number of channels: 4 amplifier channels, 2 by 2 bridgeable Max output voltage (no load): 4 x 180 V Max output power (4 channels mode / 8 Ohms load per channel): 4 x 1900 W Max output power (4 channels mode / 4 Ohms load per channel): 4 x 3300 W Max output power (4 channels mode / 2 Ohms load per channel): 4 x 4500 W Max output power (2 channels mode / 8 Ohms load per channel): 2 x 6600 W Max output power (2 channels mode / 4 Ohms load per channel): 2 x 9000 W Power consumption (Standby): 10 W Power consumption (idle): 200 W Input to Power Out Specifications: Frequency response: 10 Hz － 20 KHz ±1 dB Input Impedance / Input Sensitivity: 20 K Ω / 18 dBu Dynamic range / TDH + N: 110 dB unweighted / Typical 0.01% （Flat setup） Latency: 580 us on a flat setup Audio AD and DA converters: 24-bits @ 96 KHz Processing: 3x multicore 64-bits processing DSPs

Read more less

Experience top-tier sound quality with the NEXO P10 10" Passive Touring Loudspeaker in sleek black. This touring speaker boasts a compact, low-profile design that houses a powerful 10” LF Neodymium driver and a 1.7” diaphragm HF driver in a coaxial configuration, delivering impressive audio performance. Featuring variable HF directivity and a peak SPL of 136dB, the NEXO P10 is designed for professional audio applications where quality is paramount. With threaded inserts for easy connection of mounting accessories, this speaker offers versatility for various setups. The P10 also provides flexibility with stand fittings on both sides, allowing you to use it vertically or horizontally as a wedge monitor. Additionally, the dispersion angles can be quickly adjusted to suit your specific needs, ensuring precise sound coverage every time. Whether you choose the mobile or install version, the NEXO P10 promises outstanding sound reproduction. Its compact dimensions of 384mm wide x 497mm high x 274mm deep and weight of 15Kg make it portable and ideal for different settings. The speaker's passive design and Speakon connectors make it easy to integrate into your audio system.Don't compromise on sound quality - bring the NEXO P10 Loudspeaker into your audio setup and experience professional-grade audio like never before.Product Specifications Frequency Response (+6 dB): 63 Hz to 20 kHz Peak SPL Level (1m): 136 dB Peak Operating Voltage: 50 Vrms (150 Vpeak) HF Dispersion (according to horn): 100° x 100° (Default) - 110° x 60° (with 110° x 60° optional horn) Crossover Frequency: 63 Hz, 85 Hz Nominal Impedance: 8Ω Components: 1 x Coaxial Neodymium LF 10" 8 Ohms long excursion & HF 1.7" 8 Ohms Number of ways: 2 ways passive Connectors (Touring version): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) Connectors (Install version): 1 x Cable gland with 2 cores cable Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom Material: Custom made bent plywood of baltic birch and poplar Finish: Black or White structural paint Front Finish (Touring version): Magnelis® steel front grille + back mesh Front Finish (Install version): UV resistant acoustic fabric fitted front grill Height x Width x Depth: 497 mm x 384 mm x 274mm (19.6" x 15.2" x 10.8") Weight: Net: 15 kg (33 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F)

Read more less

Experience the pinnacle of audio excellence with the NEXO P12 12" Active/Passive Touring Loudspeaker in sleek black. Elevate your sound system with this compact, low-profile speaker that boasts a 12” LF Neodymium driver and a 3” diaphragm HF driver in a powerful coaxial configuration.Achieve exceptional sound quality with a peak SPL of 140dB in Active Mode, making every note and beat crystal clear. The variable HF directivity allows you to customise the sound dispersion to suit any application, ensuring a perfect match every time.Whether you're looking to enhance your mobile setup or an installation project, the versatile NEXO P12 is here to exceed your expectations. The curvilinear enclosure crafted from custom birch and poplar plywood houses cutting-edge technology for an unparalleled audio experience.With threaded inserts on the back and both sides, as well as stand fittings, this speaker offers seamless connectivity and mounting options. Easily switch between Active and Passive modes to adapt to different setups and environments effortlessly.Ideal for both vertical and horizontal deployment, including as a wedge monitor, the NEXO P12 delivers a superior audio performance that's bound to impress. Expand the versatility of your sound system with the comprehensive range of accessories compatible with this outstanding loudspeaker.Take your sound production to new heights with the NEXO P12. Contact our sales team today to discuss custom colour options and place your order for this exceptional piece of audio equipment.Product Specifications Frequency Response (+6 dB) 60 Hz - 20 kHz Sensitivity 1W@1m 107 dB Peak SPL Level (1m) 138dB Peak (Passive mode) / 140dB Peak (Active mode) Recommended Amplifiers 800 to 1250 Watts / 8Ω HF Dispersion (according to horns) 60°x60° - 90°x40° - Asymmetrical Dispersion 60° to 100°x40° Crossover Frequency 60 Hz, 85 Hz, 120 Hz Nominal Impedance Active mode (8Ω LF, 8Ω HF), Passive mode: 8Ω Recommended Power Active: (800 to 1270 W LF + 400 to 630 W HF) / Passive: 800 to 1270 W Components LF: 1x12" - 8Ω; HF : 1x3" - 8Ω - Neodymium driver Number of ways (Touring/TIS versions) 2 ways passive (2+/2- P12) or 2 ways active (1+/1- LF, 2+/2- HF) switchable Number of ways (Install version) 2 ways passives Connectors (Touring/TIS versions) 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) Connectors (Install version) 1 x Cable gland with 2 cores cable Rigging points 1 x universal accessory fit on each side + 1 x on the bottom Material Custom made bent plywood of baltic birch and poplar Finish Black or White structural paint Front Finish (Touring version) Steel front grille + back mesh Front Finish (Install/TIS versions) Acoustic fabric fitted front gril Weight : Net 20 kg (44 lbs) Height x Width x Depth 534mm x 432mm x 314 mm (21.0” x 17.0” x 12.3”) Operating Temperature Range 0°C - 40°C (32°F - 104°F) Storage Temperature Range -20°C - 60°C (-4°F - 140°F)

Read more less

Experience powerful and pristine sound with the NEXO P15 15" Active/Passive Touring Loudspeaker in sleek black. Designed for the ultimate audio performance, this speaker boasts a compact, low-profile curvilinear enclosure that delivers exceptional sound quality while remaining lightweight and durable.Equipped with a 15” LF Neodymium driver and a 3” diaphragm HF driver in a coaxial configuration, the NEXO P15 ensures a seamless blend of rich lows and crystal-clear highs for a truly immersive listening experience.Switch between Active and Passive modes with ease, allowing flexibility in your setup. Achieve a peak SPL of 141dB in Active Mode, ensuring your sound carries far and wide with impressive clarity.Featuring threaded inserts on the back and sides, the NEXO P15 offers convenient connections for mounting accessories, making setup a breeze. With the option for both Touring and Installation versions, this speaker caters to various needs and preferences.The custom-made bent plywood shell with poplar veneer on the inside layers and birch on the outside not only provides a robust build but also contributes to the speaker's exceptional sound quality. The bass-reflex tuning through two computer-optimised shaped ports guarantees ultra-low distortion, even at high levels.Experience the convenience of two large comfortable handles on the Touring version, each holding a 35 mm pole stand adapter and a discrete Speakon® connector. The integrated passive filter, encapsulated in certified resin, ensures longevity by protecting components from vibration and dust.Take your sound to the next level with the NEXO P15 Active/Passive Touring Loudspeaker - the perfect choice for those seeking professional-grade audio performance and versatility.Product Specifications General Frequency Response @-6 dB: 57 Hz - 20 kHz Sensitivity 1W@1m: 108 dB SPL Nominal Peak SPL@1m: 139 dB Peak (Passive mode) / 141 dB Peak (Active mode) Operating Voltage: 55 Vrms (180 Vpeak) HF Dispersion (according to flanges): 60°x60° (Default) - 90°x40° (with 90x40 flange) - 60°~100°x40° (with PS flange) Crossover Frequency: 57 H, 85 Hz, 120Hz Nominal Impedance: Active mode: (8 Ω LF + 8 Ω HF) / Passive mode: 8 Ω Recommended Power: Active: (800 to 1350 W LF + 400 to 630 W HF) / Passive: 800 to 1350 W Features Components: 1 x Coaxial Neodymium LF 15” 8 Ohms long excursion & HF 3“ 8 Ohms Number of ways (Touring version): 2 ways passive (2+/2- P15) or 2 ways active (1+/1- LF, 2+/2- HF) switchable Connectors (Touring version): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom Material: Custom made bent plywood of Baltic birch and poplar Finish: Black or White structural paint Front Finish (Touring version): Steel front grille + back mesh Weight: Net: 23 kg Height x Width x Depth: 600mm x 483mm x 352 mm Operating temperature range: 0°C - 40°C Storage temperature range: -20°C - 60°C System Operation: Recommended powering solution: NXAMP4x2mk2 Powered TDcontroller: up to 2 x P15 per channel Optional powering solution: DTDcontroller + DTDAMP4x1.3 : 1 x P15 per channel NXAMP4x1mk2 Powered TDcontroller (Bridged): up to 2 x P15 per channel NXAMP4x4mk2 Powered TDcontroller: up to 4 x P15 per channel

Read more less

Introducing the NEXO P8 8" Passive Touring Loudspeaker in a sleek black finish, designed to elevate your sound experience to new heights. This compact yet powerful speaker boasts a unique curvilinear enclosure housing an 8" LF Neodymium driver and a 1.5" diaphragm HF driver in a coaxial configuration, delivering crystal-clear audio across a wide frequency range.Experience versatility like never before with the variable HF directivity that allows you to tailor the sound projection to your specific needs. With a peak SPL of 129dB, this loudspeaker ensures an immersive auditory experience that captivates your audience.Equipped with threaded inserts on the back and both sides, this speaker offers seamless connectivity for mounting accessories, while the stand fitting on both sides allows for easy setup and positioning flexibility. Whether deployed vertically or horizontally as a wedge monitor, the NEXO P8 adapts effortlessly to any application.The NEXO P8 is thoughtfully designed with 4x NL4, 4 poles connectors for convenient connectivity, making it an ideal choice for touring events and installations. With a frequency response ranging from 66 Hz to 20 kHz and a peak operating voltage of 40 Vrms (105 Vpeak), this speaker delivers powerful and precise sound reproduction.Immerse yourself in the world of professional audio with the NEXO P8 Passive Touring Loudspeaker. Elevate your sound quality and performance with this cutting-edge speaker that combines premium components, versatile design, and exceptional sound clarity.Product Specifications Frequency Response (+6 dB): 66 Hz to 20 kHz Peak SPL Level (1m): 129 dB Peak Operating Voltage: 40 Vrms (105 Vpeak) HF Dispersion (according to horn): 100° x 100° (Default) - 110° x 60° (with 110° x 60° optional horn) Crossover Frequency: 66 Hz, 85 Hz Nominal Impedance: 8Ω Components: 1 x Coaxial LF 8" 8 Ohms long excursion & Neodymium HF 1.5" 8 Ohms Number of ways: 2 ways passive Connectors (Touring version): 4 x NL4, 4 poles connectors (1 per handle + 2 at the back) Connectors (Install version): 1 x Cable gland with 2 cores cable Rigging points: 1 x universal accessory fit on each side + 1 x on the bottom Material: Custom made bent plywood of baltic birch and poplar Finish: Black or White structural paint Front Finish (Touring version): Magnelis® steel front grille + back mesh Front Finish (Install version): UV resistant acoustic fabric fitted front grill Height x Width x Depth: 423 mm x 276 mm x 250 mm (16.7" x 10.9" x 9.8") Weight: Net: 12 kg (26.5 lbs) Operating temperature range: 0°C - 40 °C (32° F - 104° F) Storage temperature range: -20 °C - 60 °C (-4 ° F - 140° F)

Read more less