Elevate your venue's audio experience to new heights with the Dynacord C1300FDI Install Series DSP Power Amplifier. This professional-grade power amplifier is designed for permanent installation applications to deliver exceptional sound quality and flawless operation. Featuring fully integrated professional speaker processing and FIR Drive technology, this power amp ensures crystal-clear sound reproduction, bringing your music to life with exceptional clarity. The robust power supply and powerful linear amp design guarantee uninterrupted performance in even the most demanding environments, providing rock-solid reliability for continuous use. The intuitive system control software allows for easy setup and control, enabling users to tailor their audio experience effortlessly. Immerse your audience in unparalleled sound quality with the Dynacord C1300FDI Install Series DSP Power Amplifier.Key Specifications:- Power Output: 2x600W @ 4Ω- Rack Unit Size: 2UProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) Maximum Output Power, Bridged: High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70V: 1 x 625W (0.0 dB)* High Impedance Operation: 70V (in bridged mode) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: < 0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg
Elevate your venue's audio experience with the Dynacord C1800FDI Install Series DSP Power Amplifier 2x850W @ 4Ω 2U. Designed for permanent installation applications, this powerhouse of an amplifier delivers exceptional sound performance, making it ideal for bars, churches, restaurants, sports facilities, and performing arts centers. Featuring advanced DSP technology with FIR Drive, this amplifier ensures market-leading acoustic performance and rock-solid reliability for your audio setup. Enjoy effortless system control with the intuitive software that simplifies setup and allows for tailored sound adjustments to suit your venue's specific requirements. The Dynacord C1800FDI is equipped with Euroblock connectors and a robust power supply, guaranteeing flawless operation even in demanding environments. Whether you need Low Z or 70/100V operation, this amplifier has got you covered. Benefit from power-saving standby mode for energy efficiency when not in use, ensuring cost-effective operation.Key specifications:- Maximum Output Power: 2x850W @ 4Ω- Speaker Processing: Fully integrated professional speaker processing with FIR Drive technology- Connectivity: Euroblock connectors- Operation: Low Z or 70/100V operation- System Control: Intuitive software for easy setup and sound adjustment- Energy Efficiency: Power-saving standby modeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 1250W; Maximum Output Power, Bridged: Load Impedance= 4Ω=2800W; 8Ω=1700W; High Impedance= 70V Operation=1x 600W; 100V Operation=1x 1250W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70 V: 2 x 1250 W (-1.5 dB)* 100 V: 1 x 1250 W (-1.5 dB)* High Impedance Operation: 70 V (dual channel), 100 V (bridged) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg
Elevate your audio experience with the Dynacord C2800FDI Install Series DSP Power Amp, a powerhouse amplifier designed for permanent installation applications. With exceptional acoustic performance and reliability, this 2U amplifier delivers 2x1300W @ 4Ω, guaranteeing crystal-clear sound and top-notch precision. The fully integrated professional speaker processing, including FIR Drive technology, ensures unparalleled sound quality, while the intuitive system control software allows for effortless setup and customisation. Perfect for venues like bars, churches, restaurants, sports facilities, and performing arts centres, this amplifier boasts a power-saving standby mode for energy efficiency. Upgrade your audio setup today and enjoy flawless operation in any environment with the Dynacord C2800FDI Install Series DSP Power Amp. Specifications:- Power Output: 2x1300W @ 4Ω- Design: 2U Compact Design- Speaker Processing: Fully Integrated Professional Speaker Processing with FIR Drive Technology- Operation: Low Z and 70/100V Options- Energy Efficiency: Power-Saving Standby ModeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W Maximum Output Power, Bridged: Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05%% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg
- High Output Power: With a maximum output power of 2x1700W @ 4Ω, the Dynacord C3600FDI Install Series DSP Power Amp ensures a robust and reliable performance, making it perfect for venues such as bars, churches, and sports facilities.- Advanced DSP Technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, leading to market-leading acoustic performance and rock-solid reliability for an exceptional audio experience.- Easy System Control: The intuitive system control software simplifies setup and control, allowing you to effortlessly tailor the sound to suit your venue's specific requirements.Immerse your audience in a world of unparalleled audio quality with the Dynacord C3600FDI Install Series DSP Power Amp 2x1700W @ 4Ω. Designed for permanent installation applications, this powerhouse amplifier is the perfect choice for venues seeking to elevate their sound experience. Featuring cutting-edge DSP technology, this amplifier delivers fully integrated professional speaker processing with FIR Drive technology, ensuring market-leading acoustic performance and unmatched reliability. Whether you're setting up in a bar, church, restaurant, sports facility, or performing arts center, the Dynacord C3600FDI guarantees flawless operation even in the most demanding environments.Take control of your sound with the intuitive system control software, making setup and adjustments a breeze. With a maximum output power of 2x1700W @ 4Ω, this amplifier provides the high output power needed to fill your venue with crystal-clear sound. Elevate your audio experience with the Dynacord C3600FDI Install Series DSP Power Amp and set the stage for an unforgettable auditory journey.Product Specifications General Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; High Impedance= 70 V Operation=2 x 1250 W; 100 V Operation=2 x 2500 W Maximum Output Power, Bridged: Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance Direct Drive Load Capability: 100 V: 2 x 2500 W (-1.5 dB)* High Impedance Operation: 70V Operation & 100V Operation Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg
Experience unparalleled sound quality and versatility with the Dynacord CMS1000-3 10Ch Console. Representing the pinnacle of innovation in the professional audio industry, this compact mixing system combines premium components with cutting-edge features to deliver concert-quality performance every time.🎵 The CMS1000-3 features an intuitive, user-friendly design, making it the ideal choice for a wide range of professional applications. Whether you're a seasoned audio engineer or a novice in the field, this mixer offers an impressive feature set that caters to your every need.🔊 Boasting 10 input channels, including 6 Mic/Line and 4 Mic/Stereo-Line options, the CMS1000-3 provides exceptional flexibility for all your audio needs. With 2 high-quality editable effects, 100 factory presets, and 20 user presets, you'll have endless possibilities to fine-tune your sound.💻 Take your audio production to the next level with the professional 4x4 24-bit/96 kHz USB interface, complete with MIDI capabilities. This digital interface allows seamless connectivity to your PC or Mac, enhancing your workflow and expanding your creative horizons.🎚️ Fine-tune your sound with the 11-band stereo graphic equalizer, ensuring optimal audio quality for every performance. Plus, with optional accessories like the robust cover-lid with integrated handle, you can protect your mixer in style while on the go.⚡ Elevate your audio game with the Dynacord CMS1000-3 10Ch Console - the ultimate solution for professional live mixing. Experience the difference that precision engineering and superior sound quality can make in your performances. Choose Dynacord for exceptional audio excellence.Product Specifications Short Description: 100-240V, 6 Mic/Line + 4 Mic/Stereo Line Channels, 6 x AUX, Dual 24 bit Stereo Effects, USB-Audio Interface Power Consumption (without lamp / with lamp): 45 W / 50 W Dimensions (W x H x D, without lid): 510.5 x 155 x 498.5 mm Rack-mount: 483.0 x 135.0 x 443.7 mm Weight, without lid: 9.5 kg (10.5 kg incl. RMK) Product Accessories Lid DC-LID1000 Rack Mount Kit for CMS 1000 DC-RMK1000CMS Gooseneck Lamp, 12V/5W, 12”, XLR 4 pol. DC-LITLITE-4P FS 11 (Footswitch with LED) DC-FS11
Experience unparalleled audio quality and versatility with the Dynacord CMS600-3 8Ch Console. Ideal for professional applications requiring high audio quality and a compact design, this mixer is a top choice for a range of settings. Whether for live performances or fixed installations, the CMS600-3 excels in delivering exceptional performance.Featuring a unique 4+4 channel configuration, this mixer offers a total of four stereo channels, making it a perfect choice for DJs and audio professionals alike. With microphone inputs equipped with Gain control and phantom power, as well as Trim control for specific channels, this console is designed to enhance your audio mixing experience.Each channel on the CMS600-3 boasts a 3-band EQ with individual controls for High, Mid, and Low frequencies, allowing you to tailor your sound precisely to your preferences. Additionally, the mixer provides multiple send options for FX, AUX, and Monitor, giving you flexibility and control over your audio output.The master section of the CMS600-3 features dual L/R master faders, along with controls for FX1, FX2, Aux, and Monitor Return, accompanied by a 9-band master EQ. Furthermore, the digital effects device offers 200 presets and 40 user memories, allowing you to add professional-grade effects to your audio mixes effortlessly.With top-of-the-line components such as faders and potentiometers from ALPS, the Dynacord CMS600-3 ensures reliability and superior performance in any audio setting. Elevate your audio mixing experience with this intuitive, user-friendly mixer that combines advanced features with a compact and transport-friendly design.Product Specifications Part Number: F01U213891 CMS 600-3 Channels (Mono + Stereo): 4 +2 + 2 Auxiliarys (AUX, MON): Pre/Post switchable, Pre Power Consumption, at 1/8 maximum output power, 4 Ohms: 35 W Net Weight: 5.8 kg Dimensions (W x H x D), mm: 416.9 x 109.6 x 347.8 Product Accessories RMK-600-3 (Rack Mount Kit for CMS 600-3) FS 11 (Footswitch with LED) Carrying Bag for CMS 600-3
Experience unparalleled sound reinforcement with the Dynacord L1300FD Live Series DSP Amplifier. Designed to elevate live music performances, this amplifier delivers crystal-clear audio quality for professional musicians and production companies. With 2x600W @ 4Ω and 2x1000W @ 2Ω, every note is heard with precision and clarity. The integration of FIR Drive technology and true 2 ohm stability ensures market-leading acoustic performance and rock-solid reliability. The advanced DSP features, including multi-band PEQs, crossovers, limiters, and delay per channel, allow for precise sound adjustments. The amplifier's true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group provide unprecedented control over audio output. Ideal for venues of all sizes, from music clubs to performance centres, the Dynacord L1300FD Live Series DSP Amplifier is a powerhouse that guarantees an unforgettable audio experience.Specifications:- Power Output: 2x600W @ 4Ω, 2x1000W @ 2Ω- Form Factor: 2U- FIR Drive technology- True 2 ohm stability- Advanced DSP features- True channel grouping control- Multiple PEQs, crossovers, limiters, and delay per channelProduct Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω=950W; 4Ω=660W; 8Ω=350W Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω=850W; 4Ω=600W; 8Ω=320W Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68 dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg
- Exceptional sound quality and reliability: With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, the Dynacord L1800FD Live Series DSP Amplifier ensures market-leading acoustic performance and rock-solid reliability, making it the perfect choice for demanding live music applications.- Professional speaker processing with FIR Drive technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, providing you with precise control over your sound output for a truly professional performance every time.- Intuitive system control software: Enjoy easy setup and control with the intuitive system control software, allowing you to tailor your sound reinforcement to your specific needs effortlessly.Experience the pinnacle of sound reinforcement with the Dynacord L1800FD Live Series DSP Amplifier. Engineered for live music applications, this amplifier is a must-have for performing musicians and production companies seeking professional-grade performance at an accessible price point. The L Series power amplifiers boast a best-in-class feature set, including true 2 ohm stability and advanced FIR-Drive technology for exceptional sound quality and reliability. With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, this amplifier delivers unparalleled performance in venues such as music clubs, community hall events, performance centres, and sports venues. The onboard DSP provides multi-band PEQs, crossovers, limiters, and delay per channel, while the sophisticated protection circuit ensures safe and reliable operation in any environment. Take your live performances to the next level with the Dynacord L1800FD Live Series DSP Amplifier. Elevate your sound, captivate your audience, and unleash your true potential with this professional-grade amplifier.Product Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 1600W; 2.6Ω= 1300W; 4Ω= 950W; 8Ω= 480W Maximum Output Power, Dual Channel: 2Ω= 1400W; 2.6Ω= 1200W; 4Ω= 850W; 8Ω= 450W Maximum Output Power, Bridged: 4Ω= 2800W; 8Ω= 1700W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg
- Exceptional sound quality with plenty of headroom- True 2 ohm stability for reliable performance- Fully integrated professional speaker processing with FIR Drive technologyExperience unparalleled sound quality and reliability with the Dynacord L2800FD Live Series DSP Amplifier. Engineered for demanding live music applications, this amplifier delivers a powerful performance that is ideal for musicians and production companies alike. With a robust power supply and linear amp design, this amplifier ensures flawless operation even in the most challenging environments.The Dynacord L2800FD features a fully integrated professional speaker processing system with FIR Drive technology, guaranteeing market-leading acoustic performance and rock-solid reliability. Its true 2 ohm stability provides peace of mind during live performances, while the intuitive system control software makes setup and control a breeze. Equipped with an onboard DSP that includes multi-band PEQs, crossovers, limiters, and delay per channel, the Dynacord L2800FD offers advanced features such as true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group. With its exceptional engineering and applied technologies, this amplifier brings professional performance to a more accessible price point, making it a must-have for venues like music clubs, community hall events, performance centers, and sports venues. Elevate your sound reinforcement setup with the Dynacord L2800FD Live Series DSP Amplifier.Product Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: 2Ω= 2200W; 2.7Ω= 1800W; 4Ω= 1300W; 8Ω= 650W; Maximum Output Power, Bridged: 4Ω= 4400W; 8Ω= 2600W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (at 900 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg
Elevate your live music performances to professional levels with the Dynacord L3600FD Live Series DSP Amplifier. This amplifier is engineered for demanding live music applications and is the perfect companion for performing musicians and production companies seeking exceptional sound reinforcement. With a powerful output of 2x1700W @ 4Ω and 2x3000W @ 2Ω, this amplifier ensures unparalleled sound quality, providing plenty of headroom for dynamic performances. The integrated FIR Drive technology and professional speaker processing deliver market-leading acoustic performance and rock-solid reliability, setting a new standard in sound reinforcement. The true 2 ohm stability of the amplifier, along with the intuitive system control software, makes setup and operation effortless. Trust the robust protection circuit to ensure flawless operation in any environment. Experience the best-in-class features of the Dynacord L Series amplifiers at a more accessible price point and take your live performances to the next level with exceptional sound quality and professional performance characteristics.Specifications:- Power Output: 2x1700W @ 4Ω, 2x3000W @ 2Ω- FIR Drive Technology- Professional Speaker Processing- True 2 ohm stability- Intuitive System Control Software- Robust Protection CircuitProduct Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: 2Ω= 3000W; 2.7Ω= 2500W; 4Ω= 1700W; 8Ω= 900W Maximum Output Power, Bridged: 4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Maximum Output Power, Bridged4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg
Experience unparalleled audio performance with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U. This professional power amplifier delivers a robust output of 2x400W in a compact 2U chassis, ensuring exceptional sound quality for your audio setup. Featuring advanced protection circuits such as Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection, this power amp ensures the safety of both the amplifier and connected loudspeaker systems.With versatile connectivity options including phoenix input plugs for easy installation, a single block plug for all output signals, and bridged mode for multi-channel setups, the Dynacord PCL1240T provides flexibility and convenience in connection. Tailor your sound with the switchable high-pass filter in each channel and make precise audio adjustments using the level controller for each channel. The premium phoenix style screw-lock connectors facilitate a seamless setup process, while the high-performance output transformers offer floating outputs compatible with 50V, 70V, and 100V installations.Elevate your audio experience with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U, designed to meet the demands of professional audio setups.Specifications:- Power Output: 2x400W- Chassis Size: 2U- Protection Circuits: Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, Thermal Overload Protection- Connectivity: Phoenix Input Plugs, Single Block Plug, Bridged Mode- High-Pass Filter: Switchable in Each Channel- Output Transformers: High-Performance for 50V, 70V, and 100V installationsProduct Specifications Please refer to the User Manual for product specifications.
Experience the power of professional audio excellence with the Dynacord PowerMate 1000-3 10Ch Powered Mixer with Twin Digital FX. This compact powerhouse is not just a mixer; it's a complete audio solution designed for the most demanding applications in the music industry.🎵 Unleash your creativity with a mixer that combines six dedicated audio devices in one sleek unit: a mixing console, two effects units, a graphic equalizer, a USB audio interface, and a powerful amplifier. Each component is crafted with the highest quality materials, ensuring unparalleled sound performance.🎶 The PowerMate 1000-3 boasts a sophisticated mixing section with 10 discrete microphone preamps, providing crystal-clear audio quality for your performances. With 6 auxiliary busses, including two switchable pre/post fader options, you have the flexibility to customise your monitoring setup to perfection.🔊 Let your sound truly shine with the two high-quality editable effects processors, offering 100 factory presets (including the renowned PowerMate reverbs) and 20 user memories for your custom settings. The built-in USB audio interface, with 4 playback and 4 recording channels at studio-standard 24-bit/96 kHz, seamlessly connects you to your PC or Mac.💪 Deliver a powerful performance with the reliable 2 x 1000 Watts amplifier, ensuring your sound is heard loud and clear. Despite its impressive capabilities, the PowerMate 1000-3 remains lightweight at just 14 kg, making it the perfect road-ready companion for your gigs.🎹 Whether you're a professional musician, sound engineer, or live performer, the Dynacord PowerMate 1000-3 is the essential tool to elevate your audio experience to new heights. Explore a world of unparalleled versatility and exceptional sound quality with this compact yet mighty mixer.Product Specifications Channels (Mono + Stereo): 6 + 4 Auxiliarys (MON, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post switchable Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms: 2 x 1000 W Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz Power Consumption, at 1/8 maximum output power, 4 Ohms: 450 W Dimensions with lid (W x H x D): 510.5 x 164.5 x 498.5 mm Net Weight, without lid: 14.0 kg
Experience the pinnacle of audio performance with the Dynacord PowerMate 600-3 8Ch Powered Mixer. Setting a new standard in compact power mixers, this powerhouse delivers a remarkable total output of 2,000 watts while weighing in at only 9kg. Perfect for professional applications requiring high audio quality and minimal channels, this mixer excels in versatility and user-friendliness.Equipped with an intuitive mixing section, the PowerMate 600-3 features 2 editable digital effects units with 100 factory presets and 20 user memories each, ensuring a world of creative possibilities. The incorporation of a professional 4x4 24-bit / 96 kHz USB interface allows for seamless connection to a PC or Mac, enhancing your recording and playback capabilities with ease.Crafted with excellence, this mixer boasts exclusive high-quality components, including ALPS faders and potentiometers, guaranteeing durability and reliability in every performance. The class-D power amplifier delivers a robust 2 x 1,000 watts RMS into 4 ohms, ensuring pristine sound quality and power without compromise.With a mixer section featuring 8 input channels, including 4 MIC/LINE channels, 2 MIC/Stereo USB channels, and 2 stereo LINE channels, the PowerMate 600-3 caters to diverse audio needs with precision. Its lightweight design, road-ready package, and extra robust cover-lid make it the ideal choice for professional gigging and fixed installations alike.Step into a world of unmatched audio excellence with the Dynacord PowerMate 600-3 8Ch Powered Mixer. Whether you're a seasoned professional or a budding enthusiast, this compact powerhouse is your gateway to a superior sound experience. Elevate your audio game with Dynacord today.Product Specifications Channels (Mono + Stereo): 4 + 4 Auxiliarys (MON, FX, AUX): 1 Pre, 1 Post, 1 Pre/Post switchable Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms: 2 x 1000 W Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz Power Consumption, at 1/8 maximum output power, 4 Ohms: 450 W Dimensions with lid (W x H x D): 438.8 x 161.7 x 362.5 mm Net Weight, without lid: 9.0 kg
Experience superior audio performance with the Dynacord SL1200 Class-AB Power Amp. Designed for excellence, this power amp delivers a maximum output power of 2x600W @ 4Ω and 2x900W @ 2Ω, making it the ideal choice for a variety of mobile and club systems. Equipped with a comprehensive protection system and dynamic limiters, this power amp ensures the safety of your loudspeakers with features like turn-on-delay relays and the patented LPN filter, guarding against transient distortion in dynamic signals.Immerse yourself in crystal-clear sound quality with a frequency response of 10Hz to 40kHz (±1dB), delivering a dynamic and immersive listening experience. Elevate your audio setup with the Dynacord SL1200 Class-AB Power Amp and enjoy unparalleled performance and protection for your sound system.Specifications:- Power Output: 2x600W @ 4Ω, 2x900W @ 2Ω- Frequency Response: 10Hz to 40kHz (±1dB)- Maximum Input Level: +21dBuProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 600Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +3.1dBu (1.11Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1800W, 8Ω - 1200W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 900W, 4Ω - 600W, 8Ω - 380W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1700W, 4Ω - 950W, 8Ω - 480W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 14.8kg
Elevate your audio experience with the Dynacord SL1800 Class-H Power Amplifier. Designed for both mobile and club systems, this power amp delivers unmatched power and efficiency, ideal for those who demand top performance. With a max output power of 900W @ 4Ω and 1250W @ 2Ω, you can enjoy crystal-clear sound quality at any volume level. Experience worry-free listening with the comprehensive protection system, including turn-on-delay relays and dynamic limiters, ensuring your loudspeakers are always safe. The integrated patented LPN filter corrects frequency response and optimizes transient behaviour, resulting in a truly immersive sound experience. Specifications:- Power Output: 2x900W @ 4Ω, 2x1250W @ 2Ω- Rack Space: 2U- Protection System: Turn-on-delay relays, dynamic limiters- Special Feature: Patented LPN filter for optimal sound qualityProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 900Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +5.1dBu (1.39Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 2800W, 8Ω - 1800W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1250W, 4Ω - 900W, 8Ω - 550W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 2450W, 4Ω - 1400W, 8Ω - 700W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 16.3kg
Elevate your audio setup to professional standards with the Dynacord SL2400 Class-H Power Amplifier. This powerhouse of performance and reliability is designed for the discerning audiophile who demands exceptional quality. With a maximum output power of 1200W @ 4Ω and 1800W @ 2Ω, the SL2400 delivers a high, stable power output with impressive efficiency, making it the perfect choice for a versatile range of mobile and club systems.Experience peace of mind with the comprehensive protection system of the SL2400, featuring turn-on-delay relays that safeguard your loudspeakers from damage. The integrated patented LPN filter compensates for transient distortion in dynamic signals, ensuring a smooth and uninterrupted audio performance. Additionally, the switchable Low-Pass Notch filter corrects the frequency response and optimizes the transient behavior of your loudspeakers, providing a premium audio experience with clear and accurate sound reproduction.Immerse yourself in the world of professional audio with the Dynacord SL2400 Class-H Power Amplifier. With its sleek black finish and robust design, the SL2400 is not just a power amp - it's a statement of quality and performance.Specifications:- Output Power: 2x1200W @ 4Ω, 2x1800W @ 2Ω- Form Factor: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 1200Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +6.6dBu (1.66Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 3600W, 8Ω - 2400W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1800W, 4Ω - 1200W, 8Ω - 750W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 3400W, 4Ω - 1800W, 8Ω - 950W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 17.1kg
Experience unparalleled power and reliability with the Dynacord SL900 Class-AB Power Amplifier. Delivering an impressive 450W per channel at 4Ω, this amplifier is engineered to meet the demands of both mobile DJs and club systems. Its high stability and efficiency factor ensure a consistent and powerful performance, making it the ultimate choice for audio professionals. Equipped with a comprehensive protection system including dynamic limiters, turn-on-delay relays, and a patented LPN filter, this amplifier guarantees the safety and security of your equipment, especially your loudspeakers. The sleek black finish and compact 2U design not only exude professionalism but also signify durability and long-lasting performance. Elevate your audio setup today with the Dynacord SL900 Power Amplifier.Specifications:- Maximum Output Power: 450W per channel @ 4Ω- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Size: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 450Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +2,2dBu (1,0Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1300W, 8Ω - 900W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 650W, 4Ω - 450W, 8Ω - 270W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1150W, 4Ω - 660W, 8Ω - 350W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 12.6kg
With a total output capacity of 600 watts, this compact two-channel amplifier Dynacord V600:2 is not only tailored for background music and announcements but also excels whenever higher SPL levels in small to mid-sized fixed installations are required, including educational facilities, hospitality venues, retail areas and houses of worshipThis versatile 2-channel amplifier delivers a total power capacity of 600W, making it perfect for a wide range of applications, from soothing background music to impactful announcements. Engineered for small to mid-sized fixed installations, this powerhouse combines power and efficiency seamlessly. With advanced technologies such as powerTANK, Variable Load Drive (VLD), ecoRAIL, and dualCOOL, this amplifier ensures flexible power usage, reduced energy consumption, and silent operation. The compact half-rack design offers multiple installation options, even in space-limited environments. Say goodbye to bulky amplifiers and embrace the sleek and powerful V600:2 to revolutionise your audio experience.Specifications
Total rated output power: 600 W
Number of channels: 2
Rated output power1: 2 x 300 W
Output power:: 4 Ω / 8 Ω / 70 V / 100 V
Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W
Amplifier 4 Ω / 8 Ω / 70 V / 100 V
Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB
Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB
THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 %
Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male,parallel 1x RJ45 (AES72-1E)
Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female
Control port type: 1 x 5-pin Euroblock, 3.81 mm, male
Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter
Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC
Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W
Consumption at 1/8 rated output power: 115 W
Standby mode (APD active): < 1 W
Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection
Product Specifications Electrical Total rated output power: 600 W Number of channels: 2 Rated output power1: 2 x 300 W Output power:: 4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 % Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E) Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control port type: 1 x 5-pin Euroblock, 3.81 mm, male General Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W Consumption at 1/8 rated output power: 115 W Standby mode (APD active): < 1 W Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection See Datasheet in Downloads tab for full specifications
The Dynacord V600:4 Power Amp offers a total powerTANK capacity of 600W, ensuring reliable and robust performance for small to mid-sized installation scenarios. - Featuring dualCOOL convection cooling and intelligent fan ecoRAIL, this 4-channel amplifier delivers a significant reduction in power consumption, making it an energy-efficient choice for various applications. - The Variable Load Drive (VLD) technology allows the V600:4 to provide the same power output into 4Ω, 8Ω, 70V, or 100V, offering unparalleled flexibility for driving multiple audio zones with different loads. Step into a world of professional audio excellence with the Dynacord V600:4 Power Amp 4Ch 600W powerTANK 4Ω/8Ω/100V 19" 1U. Designed for consultants, installers, and specifiers seeking a versatile and reliable amplifier, the V600:4 is the epitome of cutting-edge technology and performance. With a compact 1U form factor that saves valuable rack space, this amplifier is a powerhouse for various installation scenarios, from education and hospitality to retail and houses of worship. Experience the ultimate in efficiency with dualCOOL convection cooling and intelligent fan ecoRAIL, ensuring optimal performance while minimising power consumption. The Variable Load Drive (VLD) technology empowers the V600:4 to deliver consistent power output across different impedance levels, making it a go-to choice for driving multiple audio zones seamlessly. Say goodbye to energy wastage as the Dynacord powerTANK technology acts as a power reservoir, allowing for asymmetric power distribution as needed. Whether you're setting up a compact zone or a larger auditorium, the Dynacord V600:4 is your ideal companion, offering unparalleled flexibility and ease of installation. Elevate your audio experience and unlock the true potential of your sound system with the Dynacord V600:4 Power Amp - where innovation meets performance effortlessly.Specifications
Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter
Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC
Power consumption: Consumption at 1/8 rated output power 115 W
Idle mode (ecoRAIL with no input signal) < 20 W
Standby mode (APD active) < 1 W
Power supply topology: Switching power supply with power factor correction
Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection
Front status LEDs: Signal, limit, fault LEDs per channel; power LED
Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W
Maximum output power per channel (power sharing): 300 W
Total rated output power: 600 W
Analog Audio Input:
Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK
Maximum input level (LEVEL 0 dB): +18 dBu
Input impedance, active balanced: 20 kΩ
Mains Input: IEC C14
Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female
Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male
REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC
Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions.
Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F)
Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft)
IEC Protection Class: Class I (grounded)
With 19” mounting brackets 44.2 x 483 x 269.5 mm(1.74 x 19.2 x 10.6 in)
Weight: 3.6 kg (7.9 lb)
Product Specifications General Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology: Switching power supply with power factor correction Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs: Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W Maximum output power per channel (power sharing): 300 W Total rated output power: 600 W Connectivity Analog Audio Input: Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB): +18 dBu Input impedance, active balanced: 20 kΩ Mains Input: IEC C14 Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC Climatic conditions Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft) Enclosure IEC Protection Class: Class I (grounded) Dimensions (HxWxD) With 19” mounting brackets 44.2 x 483 x 269.5 mm (1.74 x 19.2 x 10.6 in) Weight: 3.6 kg (7.9 lb) See Datasheet in Downloads tab for power specifications
Elevate your venue's audio experience to new heights with the Dynacord C1300FDI Install Series DSP Power Amplifier. This professional-grade power amplifier is designed for permanent installation applications to deliver exceptional sound quality and flawless operation. Featuring fully integrated professional speaker processing and FIR Drive technology, this power amp ensures crystal-clear sound reproduction, bringing your music to life with exceptional clarity. The robust power supply and powerful linear amp design guarantee uninterrupted performance in even the most demanding environments, providing rock-solid reliability for continuous use. The intuitive system control software allows for easy setup and control, enabling users to tailor their audio experience effortlessly. Immerse your audience in unparalleled sound quality with the Dynacord C1300FDI Install Series DSP Power Amplifier.Key Specifications:- Power Output: 2x600W @ 4Ω- Rack Unit Size: 2UProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) Maximum Output Power, Bridged: High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70V: 1 x 625W (0.0 dB)* High Impedance Operation: 70V (in bridged mode) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: < 0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg
Elevate your venue's audio experience with the Dynacord C1800FDI Install Series DSP Power Amplifier 2x850W @ 4Ω 2U. Designed for permanent installation applications, this powerhouse of an amplifier delivers exceptional sound performance, making it ideal for bars, churches, restaurants, sports facilities, and performing arts centers. Featuring advanced DSP technology with FIR Drive, this amplifier ensures market-leading acoustic performance and rock-solid reliability for your audio setup. Enjoy effortless system control with the intuitive software that simplifies setup and allows for tailored sound adjustments to suit your venue's specific requirements. The Dynacord C1800FDI is equipped with Euroblock connectors and a robust power supply, guaranteeing flawless operation even in demanding environments. Whether you need Low Z or 70/100V operation, this amplifier has got you covered. Benefit from power-saving standby mode for energy efficiency when not in use, ensuring cost-effective operation.Key specifications:- Maximum Output Power: 2x850W @ 4Ω- Speaker Processing: Fully integrated professional speaker processing with FIR Drive technology- Connectivity: Euroblock connectors- Operation: Low Z or 70/100V operation- System Control: Intuitive software for easy setup and sound adjustment- Energy Efficiency: Power-saving standby modeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 1250W; Maximum Output Power, Bridged: Load Impedance= 4Ω=2800W; 8Ω=1700W; High Impedance= 70V Operation=1x 600W; 100V Operation=1x 1250W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70 V: 2 x 1250 W (-1.5 dB)* 100 V: 1 x 1250 W (-1.5 dB)* High Impedance Operation: 70 V (dual channel), 100 V (bridged) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg
Elevate your audio experience with the Dynacord C2800FDI Install Series DSP Power Amp, a powerhouse amplifier designed for permanent installation applications. With exceptional acoustic performance and reliability, this 2U amplifier delivers 2x1300W @ 4Ω, guaranteeing crystal-clear sound and top-notch precision. The fully integrated professional speaker processing, including FIR Drive technology, ensures unparalleled sound quality, while the intuitive system control software allows for effortless setup and customisation. Perfect for venues like bars, churches, restaurants, sports facilities, and performing arts centres, this amplifier boasts a power-saving standby mode for energy efficiency. Upgrade your audio setup today and enjoy flawless operation in any environment with the Dynacord C2800FDI Install Series DSP Power Amp. Specifications:- Power Output: 2x1300W @ 4Ω- Design: 2U Compact Design- Speaker Processing: Fully Integrated Professional Speaker Processing with FIR Drive Technology- Operation: Low Z and 70/100V Options- Energy Efficiency: Power-Saving Standby ModeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W Maximum Output Power, Bridged: Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05%% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg
- High Output Power: With a maximum output power of 2x1700W @ 4Ω, the Dynacord C3600FDI Install Series DSP Power Amp ensures a robust and reliable performance, making it perfect for venues such as bars, churches, and sports facilities.- Advanced DSP Technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, leading to market-leading acoustic performance and rock-solid reliability for an exceptional audio experience.- Easy System Control: The intuitive system control software simplifies setup and control, allowing you to effortlessly tailor the sound to suit your venue's specific requirements.Immerse your audience in a world of unparalleled audio quality with the Dynacord C3600FDI Install Series DSP Power Amp 2x1700W @ 4Ω. Designed for permanent installation applications, this powerhouse amplifier is the perfect choice for venues seeking to elevate their sound experience. Featuring cutting-edge DSP technology, this amplifier delivers fully integrated professional speaker processing with FIR Drive technology, ensuring market-leading acoustic performance and unmatched reliability. Whether you're setting up in a bar, church, restaurant, sports facility, or performing arts center, the Dynacord C3600FDI guarantees flawless operation even in the most demanding environments.Take control of your sound with the intuitive system control software, making setup and adjustments a breeze. With a maximum output power of 2x1700W @ 4Ω, this amplifier provides the high output power needed to fill your venue with crystal-clear sound. Elevate your audio experience with the Dynacord C3600FDI Install Series DSP Power Amp and set the stage for an unforgettable auditory journey.Product Specifications General Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; High Impedance= 70 V Operation=2 x 1250 W; 100 V Operation=2 x 2500 W Maximum Output Power, Bridged: Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance Direct Drive Load Capability: 100 V: 2 x 2500 W (-1.5 dB)* High Impedance Operation: 70V Operation & 100V Operation Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg
Experience unparalleled sound quality and versatility with the Dynacord CMS1000-3 10Ch Console. Representing the pinnacle of innovation in the professional audio industry, this compact mixing system combines premium components with cutting-edge features to deliver concert-quality performance every time.🎵 The CMS1000-3 features an intuitive, user-friendly design, making it the ideal choice for a wide range of professional applications. Whether you're a seasoned audio engineer or a novice in the field, this mixer offers an impressive feature set that caters to your every need.🔊 Boasting 10 input channels, including 6 Mic/Line and 4 Mic/Stereo-Line options, the CMS1000-3 provides exceptional flexibility for all your audio needs. With 2 high-quality editable effects, 100 factory presets, and 20 user presets, you'll have endless possibilities to fine-tune your sound.💻 Take your audio production to the next level with the professional 4x4 24-bit/96 kHz USB interface, complete with MIDI capabilities. This digital interface allows seamless connectivity to your PC or Mac, enhancing your workflow and expanding your creative horizons.🎚️ Fine-tune your sound with the 11-band stereo graphic equalizer, ensuring optimal audio quality for every performance. Plus, with optional accessories like the robust cover-lid with integrated handle, you can protect your mixer in style while on the go.⚡ Elevate your audio game with the Dynacord CMS1000-3 10Ch Console - the ultimate solution for professional live mixing. Experience the difference that precision engineering and superior sound quality can make in your performances. Choose Dynacord for exceptional audio excellence.Product Specifications Short Description: 100-240V, 6 Mic/Line + 4 Mic/Stereo Line Channels, 6 x AUX, Dual 24 bit Stereo Effects, USB-Audio Interface Power Consumption (without lamp / with lamp): 45 W / 50 W Dimensions (W x H x D, without lid): 510.5 x 155 x 498.5 mm Rack-mount: 483.0 x 135.0 x 443.7 mm Weight, without lid: 9.5 kg (10.5 kg incl. RMK) Product Accessories Lid DC-LID1000 Rack Mount Kit for CMS 1000 DC-RMK1000CMS Gooseneck Lamp, 12V/5W, 12”, XLR 4 pol. DC-LITLITE-4P FS 11 (Footswitch with LED) DC-FS11
Experience unparalleled audio quality and versatility with the Dynacord CMS600-3 8Ch Console. Ideal for professional applications requiring high audio quality and a compact design, this mixer is a top choice for a range of settings. Whether for live performances or fixed installations, the CMS600-3 excels in delivering exceptional performance.Featuring a unique 4+4 channel configuration, this mixer offers a total of four stereo channels, making it a perfect choice for DJs and audio professionals alike. With microphone inputs equipped with Gain control and phantom power, as well as Trim control for specific channels, this console is designed to enhance your audio mixing experience.Each channel on the CMS600-3 boasts a 3-band EQ with individual controls for High, Mid, and Low frequencies, allowing you to tailor your sound precisely to your preferences. Additionally, the mixer provides multiple send options for FX, AUX, and Monitor, giving you flexibility and control over your audio output.The master section of the CMS600-3 features dual L/R master faders, along with controls for FX1, FX2, Aux, and Monitor Return, accompanied by a 9-band master EQ. Furthermore, the digital effects device offers 200 presets and 40 user memories, allowing you to add professional-grade effects to your audio mixes effortlessly.With top-of-the-line components such as faders and potentiometers from ALPS, the Dynacord CMS600-3 ensures reliability and superior performance in any audio setting. Elevate your audio mixing experience with this intuitive, user-friendly mixer that combines advanced features with a compact and transport-friendly design.Product Specifications Part Number: F01U213891 CMS 600-3 Channels (Mono + Stereo): 4 +2 + 2 Auxiliarys (AUX, MON): Pre/Post switchable, Pre Power Consumption, at 1/8 maximum output power, 4 Ohms: 35 W Net Weight: 5.8 kg Dimensions (W x H x D), mm: 416.9 x 109.6 x 347.8 Product Accessories RMK-600-3 (Rack Mount Kit for CMS 600-3) FS 11 (Footswitch with LED) Carrying Bag for CMS 600-3
Experience unparalleled sound reinforcement with the Dynacord L1300FD Live Series DSP Amplifier. Designed to elevate live music performances, this amplifier delivers crystal-clear audio quality for professional musicians and production companies. With 2x600W @ 4Ω and 2x1000W @ 2Ω, every note is heard with precision and clarity. The integration of FIR Drive technology and true 2 ohm stability ensures market-leading acoustic performance and rock-solid reliability. The advanced DSP features, including multi-band PEQs, crossovers, limiters, and delay per channel, allow for precise sound adjustments. The amplifier's true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group provide unprecedented control over audio output. Ideal for venues of all sizes, from music clubs to performance centres, the Dynacord L1300FD Live Series DSP Amplifier is a powerhouse that guarantees an unforgettable audio experience.Specifications:- Power Output: 2x600W @ 4Ω, 2x1000W @ 2Ω- Form Factor: 2U- FIR Drive technology- True 2 ohm stability- Advanced DSP features- True channel grouping control- Multiple PEQs, crossovers, limiters, and delay per channelProduct Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω=950W; 4Ω=660W; 8Ω=350W Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω=850W; 4Ω=600W; 8Ω=320W Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68 dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg
- Exceptional sound quality and reliability: With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, the Dynacord L1800FD Live Series DSP Amplifier ensures market-leading acoustic performance and rock-solid reliability, making it the perfect choice for demanding live music applications.- Professional speaker processing with FIR Drive technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, providing you with precise control over your sound output for a truly professional performance every time.- Intuitive system control software: Enjoy easy setup and control with the intuitive system control software, allowing you to tailor your sound reinforcement to your specific needs effortlessly.Experience the pinnacle of sound reinforcement with the Dynacord L1800FD Live Series DSP Amplifier. Engineered for live music applications, this amplifier is a must-have for performing musicians and production companies seeking professional-grade performance at an accessible price point. The L Series power amplifiers boast a best-in-class feature set, including true 2 ohm stability and advanced FIR-Drive technology for exceptional sound quality and reliability. With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, this amplifier delivers unparalleled performance in venues such as music clubs, community hall events, performance centres, and sports venues. The onboard DSP provides multi-band PEQs, crossovers, limiters, and delay per channel, while the sophisticated protection circuit ensures safe and reliable operation in any environment. Take your live performances to the next level with the Dynacord L1800FD Live Series DSP Amplifier. Elevate your sound, captivate your audience, and unleash your true potential with this professional-grade amplifier.Product Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 1600W; 2.6Ω= 1300W; 4Ω= 950W; 8Ω= 480W Maximum Output Power, Dual Channel: 2Ω= 1400W; 2.6Ω= 1200W; 4Ω= 850W; 8Ω= 450W Maximum Output Power, Bridged: 4Ω= 2800W; 8Ω= 1700W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg
- Exceptional sound quality with plenty of headroom- True 2 ohm stability for reliable performance- Fully integrated professional speaker processing with FIR Drive technologyExperience unparalleled sound quality and reliability with the Dynacord L2800FD Live Series DSP Amplifier. Engineered for demanding live music applications, this amplifier delivers a powerful performance that is ideal for musicians and production companies alike. With a robust power supply and linear amp design, this amplifier ensures flawless operation even in the most challenging environments.The Dynacord L2800FD features a fully integrated professional speaker processing system with FIR Drive technology, guaranteeing market-leading acoustic performance and rock-solid reliability. Its true 2 ohm stability provides peace of mind during live performances, while the intuitive system control software makes setup and control a breeze. Equipped with an onboard DSP that includes multi-band PEQs, crossovers, limiters, and delay per channel, the Dynacord L2800FD offers advanced features such as true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group. With its exceptional engineering and applied technologies, this amplifier brings professional performance to a more accessible price point, making it a must-have for venues like music clubs, community hall events, performance centers, and sports venues. Elevate your sound reinforcement setup with the Dynacord L2800FD Live Series DSP Amplifier.Product Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: 2Ω= 2200W; 2.7Ω= 1800W; 4Ω= 1300W; 8Ω= 650W; Maximum Output Power, Bridged: 4Ω= 4400W; 8Ω= 2600W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (at 900 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg
Elevate your live music performances to professional levels with the Dynacord L3600FD Live Series DSP Amplifier. This amplifier is engineered for demanding live music applications and is the perfect companion for performing musicians and production companies seeking exceptional sound reinforcement. With a powerful output of 2x1700W @ 4Ω and 2x3000W @ 2Ω, this amplifier ensures unparalleled sound quality, providing plenty of headroom for dynamic performances. The integrated FIR Drive technology and professional speaker processing deliver market-leading acoustic performance and rock-solid reliability, setting a new standard in sound reinforcement. The true 2 ohm stability of the amplifier, along with the intuitive system control software, makes setup and operation effortless. Trust the robust protection circuit to ensure flawless operation in any environment. Experience the best-in-class features of the Dynacord L Series amplifiers at a more accessible price point and take your live performances to the next level with exceptional sound quality and professional performance characteristics.Specifications:- Power Output: 2x1700W @ 4Ω, 2x3000W @ 2Ω- FIR Drive Technology- Professional Speaker Processing- True 2 ohm stability- Intuitive System Control Software- Robust Protection CircuitProduct Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: 2Ω= 3000W; 2.7Ω= 2500W; 4Ω= 1700W; 8Ω= 900W Maximum Output Power, Bridged: 4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Maximum Output Power, Bridged4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg
Experience unparalleled audio performance with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U. This professional power amplifier delivers a robust output of 2x400W in a compact 2U chassis, ensuring exceptional sound quality for your audio setup. Featuring advanced protection circuits such as Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection, this power amp ensures the safety of both the amplifier and connected loudspeaker systems.With versatile connectivity options including phoenix input plugs for easy installation, a single block plug for all output signals, and bridged mode for multi-channel setups, the Dynacord PCL1240T provides flexibility and convenience in connection. Tailor your sound with the switchable high-pass filter in each channel and make precise audio adjustments using the level controller for each channel. The premium phoenix style screw-lock connectors facilitate a seamless setup process, while the high-performance output transformers offer floating outputs compatible with 50V, 70V, and 100V installations.Elevate your audio experience with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U, designed to meet the demands of professional audio setups.Specifications:- Power Output: 2x400W- Chassis Size: 2U- Protection Circuits: Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, Thermal Overload Protection- Connectivity: Phoenix Input Plugs, Single Block Plug, Bridged Mode- High-Pass Filter: Switchable in Each Channel- Output Transformers: High-Performance for 50V, 70V, and 100V installationsProduct Specifications Please refer to the User Manual for product specifications.
Experience the power of professional audio excellence with the Dynacord PowerMate 1000-3 10Ch Powered Mixer with Twin Digital FX. This compact powerhouse is not just a mixer; it's a complete audio solution designed for the most demanding applications in the music industry.🎵 Unleash your creativity with a mixer that combines six dedicated audio devices in one sleek unit: a mixing console, two effects units, a graphic equalizer, a USB audio interface, and a powerful amplifier. Each component is crafted with the highest quality materials, ensuring unparalleled sound performance.🎶 The PowerMate 1000-3 boasts a sophisticated mixing section with 10 discrete microphone preamps, providing crystal-clear audio quality for your performances. With 6 auxiliary busses, including two switchable pre/post fader options, you have the flexibility to customise your monitoring setup to perfection.🔊 Let your sound truly shine with the two high-quality editable effects processors, offering 100 factory presets (including the renowned PowerMate reverbs) and 20 user memories for your custom settings. The built-in USB audio interface, with 4 playback and 4 recording channels at studio-standard 24-bit/96 kHz, seamlessly connects you to your PC or Mac.💪 Deliver a powerful performance with the reliable 2 x 1000 Watts amplifier, ensuring your sound is heard loud and clear. Despite its impressive capabilities, the PowerMate 1000-3 remains lightweight at just 14 kg, making it the perfect road-ready companion for your gigs.🎹 Whether you're a professional musician, sound engineer, or live performer, the Dynacord PowerMate 1000-3 is the essential tool to elevate your audio experience to new heights. Explore a world of unparalleled versatility and exceptional sound quality with this compact yet mighty mixer.Product Specifications Channels (Mono + Stereo): 6 + 4 Auxiliarys (MON, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post switchable Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms: 2 x 1000 W Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz Power Consumption, at 1/8 maximum output power, 4 Ohms: 450 W Dimensions with lid (W x H x D): 510.5 x 164.5 x 498.5 mm Net Weight, without lid: 14.0 kg
Experience the pinnacle of audio performance with the Dynacord PowerMate 600-3 8Ch Powered Mixer. Setting a new standard in compact power mixers, this powerhouse delivers a remarkable total output of 2,000 watts while weighing in at only 9kg. Perfect for professional applications requiring high audio quality and minimal channels, this mixer excels in versatility and user-friendliness.Equipped with an intuitive mixing section, the PowerMate 600-3 features 2 editable digital effects units with 100 factory presets and 20 user memories each, ensuring a world of creative possibilities. The incorporation of a professional 4x4 24-bit / 96 kHz USB interface allows for seamless connection to a PC or Mac, enhancing your recording and playback capabilities with ease.Crafted with excellence, this mixer boasts exclusive high-quality components, including ALPS faders and potentiometers, guaranteeing durability and reliability in every performance. The class-D power amplifier delivers a robust 2 x 1,000 watts RMS into 4 ohms, ensuring pristine sound quality and power without compromise.With a mixer section featuring 8 input channels, including 4 MIC/LINE channels, 2 MIC/Stereo USB channels, and 2 stereo LINE channels, the PowerMate 600-3 caters to diverse audio needs with precision. Its lightweight design, road-ready package, and extra robust cover-lid make it the ideal choice for professional gigging and fixed installations alike.Step into a world of unmatched audio excellence with the Dynacord PowerMate 600-3 8Ch Powered Mixer. Whether you're a seasoned professional or a budding enthusiast, this compact powerhouse is your gateway to a superior sound experience. Elevate your audio game with Dynacord today.Product Specifications Channels (Mono + Stereo): 4 + 4 Auxiliarys (MON, FX, AUX): 1 Pre, 1 Post, 1 Pre/Post switchable Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms: 2 x 1000 W Power Requirements (SMPS with auto range mains input): 100 V to 240 V AC, 50 Hz to 60 Hz Power Consumption, at 1/8 maximum output power, 4 Ohms: 450 W Dimensions with lid (W x H x D): 438.8 x 161.7 x 362.5 mm Net Weight, without lid: 9.0 kg
Experience superior audio performance with the Dynacord SL1200 Class-AB Power Amp. Designed for excellence, this power amp delivers a maximum output power of 2x600W @ 4Ω and 2x900W @ 2Ω, making it the ideal choice for a variety of mobile and club systems. Equipped with a comprehensive protection system and dynamic limiters, this power amp ensures the safety of your loudspeakers with features like turn-on-delay relays and the patented LPN filter, guarding against transient distortion in dynamic signals.Immerse yourself in crystal-clear sound quality with a frequency response of 10Hz to 40kHz (±1dB), delivering a dynamic and immersive listening experience. Elevate your audio setup with the Dynacord SL1200 Class-AB Power Amp and enjoy unparalleled performance and protection for your sound system.Specifications:- Power Output: 2x600W @ 4Ω, 2x900W @ 2Ω- Frequency Response: 10Hz to 40kHz (±1dB)- Maximum Input Level: +21dBuProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 600Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +3.1dBu (1.11Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1800W, 8Ω - 1200W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 900W, 4Ω - 600W, 8Ω - 380W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1700W, 4Ω - 950W, 8Ω - 480W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 14.8kg
Elevate your audio experience with the Dynacord SL1800 Class-H Power Amplifier. Designed for both mobile and club systems, this power amp delivers unmatched power and efficiency, ideal for those who demand top performance. With a max output power of 900W @ 4Ω and 1250W @ 2Ω, you can enjoy crystal-clear sound quality at any volume level. Experience worry-free listening with the comprehensive protection system, including turn-on-delay relays and dynamic limiters, ensuring your loudspeakers are always safe. The integrated patented LPN filter corrects frequency response and optimizes transient behaviour, resulting in a truly immersive sound experience. Specifications:- Power Output: 2x900W @ 4Ω, 2x1250W @ 2Ω- Rack Space: 2U- Protection System: Turn-on-delay relays, dynamic limiters- Special Feature: Patented LPN filter for optimal sound qualityProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 900Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +5.1dBu (1.39Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 2800W, 8Ω - 1800W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1250W, 4Ω - 900W, 8Ω - 550W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 2450W, 4Ω - 1400W, 8Ω - 700W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 16.3kg
Elevate your audio setup to professional standards with the Dynacord SL2400 Class-H Power Amplifier. This powerhouse of performance and reliability is designed for the discerning audiophile who demands exceptional quality. With a maximum output power of 1200W @ 4Ω and 1800W @ 2Ω, the SL2400 delivers a high, stable power output with impressive efficiency, making it the perfect choice for a versatile range of mobile and club systems.Experience peace of mind with the comprehensive protection system of the SL2400, featuring turn-on-delay relays that safeguard your loudspeakers from damage. The integrated patented LPN filter compensates for transient distortion in dynamic signals, ensuring a smooth and uninterrupted audio performance. Additionally, the switchable Low-Pass Notch filter corrects the frequency response and optimizes the transient behavior of your loudspeakers, providing a premium audio experience with clear and accurate sound reproduction.Immerse yourself in the world of professional audio with the Dynacord SL2400 Class-H Power Amplifier. With its sleek black finish and robust design, the SL2400 is not just a power amp - it's a statement of quality and performance.Specifications:- Output Power: 2x1200W @ 4Ω, 2x1800W @ 2Ω- Form Factor: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 1200Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +6.6dBu (1.66Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 3600W, 8Ω - 2400W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1800W, 4Ω - 1200W, 8Ω - 750W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 3400W, 4Ω - 1800W, 8Ω - 950W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 17.1kg
Experience unparalleled power and reliability with the Dynacord SL900 Class-AB Power Amplifier. Delivering an impressive 450W per channel at 4Ω, this amplifier is engineered to meet the demands of both mobile DJs and club systems. Its high stability and efficiency factor ensure a consistent and powerful performance, making it the ultimate choice for audio professionals. Equipped with a comprehensive protection system including dynamic limiters, turn-on-delay relays, and a patented LPN filter, this amplifier guarantees the safety and security of your equipment, especially your loudspeakers. The sleek black finish and compact 2U design not only exude professionalism but also signify durability and long-lasting performance. Elevate your audio setup today with the Dynacord SL900 Power Amplifier.Specifications:- Maximum Output Power: 450W per channel @ 4Ω- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Size: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 450Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +2,2dBu (1,0Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1300W, 8Ω - 900W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 650W, 4Ω - 450W, 8Ω - 270W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1150W, 4Ω - 660W, 8Ω - 350W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 12.6kg
With a total output capacity of 600 watts, this compact two-channel amplifier Dynacord V600:2 is not only tailored for background music and announcements but also excels whenever higher SPL levels in small to mid-sized fixed installations are required, including educational facilities, hospitality venues, retail areas and houses of worshipThis versatile 2-channel amplifier delivers a total power capacity of 600W, making it perfect for a wide range of applications, from soothing background music to impactful announcements. Engineered for small to mid-sized fixed installations, this powerhouse combines power and efficiency seamlessly. With advanced technologies such as powerTANK, Variable Load Drive (VLD), ecoRAIL, and dualCOOL, this amplifier ensures flexible power usage, reduced energy consumption, and silent operation. The compact half-rack design offers multiple installation options, even in space-limited environments. Say goodbye to bulky amplifiers and embrace the sleek and powerful V600:2 to revolutionise your audio experience.Specifications
Total rated output power: 600 W
Number of channels: 2
Rated output power1: 2 x 300 W
Output power:: 4 Ω / 8 Ω / 70 V / 100 V
Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W
Amplifier 4 Ω / 8 Ω / 70 V / 100 V
Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB
Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB
THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 %
Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male,parallel 1x RJ45 (AES72-1E)
Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female
Control port type: 1 x 5-pin Euroblock, 3.81 mm, male
Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter
Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC
Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W
Consumption at 1/8 rated output power: 115 W
Standby mode (APD active): < 1 W
Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection
Product Specifications Electrical Total rated output power: 600 W Number of channels: 2 Rated output power1: 2 x 300 W Output power:: 4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 % Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E) Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control port type: 1 x 5-pin Euroblock, 3.81 mm, male General Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W Consumption at 1/8 rated output power: 115 W Standby mode (APD active): < 1 W Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection See Datasheet in Downloads tab for full specifications
The Dynacord V600:4 Power Amp offers a total powerTANK capacity of 600W, ensuring reliable and robust performance for small to mid-sized installation scenarios. - Featuring dualCOOL convection cooling and intelligent fan ecoRAIL, this 4-channel amplifier delivers a significant reduction in power consumption, making it an energy-efficient choice for various applications. - The Variable Load Drive (VLD) technology allows the V600:4 to provide the same power output into 4Ω, 8Ω, 70V, or 100V, offering unparalleled flexibility for driving multiple audio zones with different loads. Step into a world of professional audio excellence with the Dynacord V600:4 Power Amp 4Ch 600W powerTANK 4Ω/8Ω/100V 19" 1U. Designed for consultants, installers, and specifiers seeking a versatile and reliable amplifier, the V600:4 is the epitome of cutting-edge technology and performance. With a compact 1U form factor that saves valuable rack space, this amplifier is a powerhouse for various installation scenarios, from education and hospitality to retail and houses of worship. Experience the ultimate in efficiency with dualCOOL convection cooling and intelligent fan ecoRAIL, ensuring optimal performance while minimising power consumption. The Variable Load Drive (VLD) technology empowers the V600:4 to deliver consistent power output across different impedance levels, making it a go-to choice for driving multiple audio zones seamlessly. Say goodbye to energy wastage as the Dynacord powerTANK technology acts as a power reservoir, allowing for asymmetric power distribution as needed. Whether you're setting up a compact zone or a larger auditorium, the Dynacord V600:4 is your ideal companion, offering unparalleled flexibility and ease of installation. Elevate your audio experience and unlock the true potential of your sound system with the Dynacord V600:4 Power Amp - where innovation meets performance effortlessly.Specifications
Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter
Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC
Power consumption: Consumption at 1/8 rated output power 115 W
Idle mode (ecoRAIL with no input signal) < 20 W
Standby mode (APD active) < 1 W
Power supply topology: Switching power supply with power factor correction
Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection
Front status LEDs: Signal, limit, fault LEDs per channel; power LED
Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W
Maximum output power per channel (power sharing): 300 W
Total rated output power: 600 W
Analog Audio Input:
Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK
Maximum input level (LEVEL 0 dB): +18 dBu
Input impedance, active balanced: 20 kΩ
Mains Input: IEC C14
Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female
Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male
REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC
Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions.
Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F)
Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft)
IEC Protection Class: Class I (grounded)
With 19” mounting brackets 44.2 x 483 x 269.5 mm(1.74 x 19.2 x 10.6 in)
Weight: 3.6 kg (7.9 lb)
Product Specifications General Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology: Switching power supply with power factor correction Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs: Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W Maximum output power per channel (power sharing): 300 W Total rated output power: 600 W Connectivity Analog Audio Input: Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB): +18 dBu Input impedance, active balanced: 20 kΩ Mains Input: IEC C14 Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC Climatic conditions Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft) Enclosure IEC Protection Class: Class I (grounded) Dimensions (HxWxD) With 19” mounting brackets 44.2 x 483 x 269.5 mm (1.74 x 19.2 x 10.6 in) Weight: 3.6 kg (7.9 lb) See Datasheet in Downloads tab for power specifications
