Optimal Audio Up 6 Two-Way 6" Ceiling Speaker with Backcan 60W @ 100V White

Description

Main Features

  • 6” coaxial driver
  • Discreet size
  • Unobtrusive design
  • 16 ohm or 70/100V line operation
  • Range of power taps
  • Wide conical coverage pattern

Up 6 Two-Way 6" Ceiling Speaker with Backcan 60W @ 100V White

Up 6 is a no-compromise two-way, passive 6” ceiling speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments that require higher sound pressure levels from hotels and concourses to retail outlets, bars and restaurants.

An integral fixing system is included to achieve a simple and clean installation. Up 6 has a steel back can, perforated steel grill and is finished in neutral white.

Up 6 features a 6” (162mm) low frequency driver paired with a 0.7″ (20mm) metal dome tweeter. It is suitable for both high quality speech and music reproduction. A conical 110° coverage pattern delivers consistent, high performance sound where it needs to go.

Each Up 6 can be run on a series of 70 or 100 Volt taps or at low impedance. The 16 ohm setting allows up to four units to be connected to each amplifier channel at low impedance. Tap selection is via a rotary switch behind the removable grille.

SmartAmps or Zone will provide optimal performance and loudspeaker protection. When coupled with the Zone series, a ZonePad and the WebApp makes setting up a system and end user control simple and intuitive.

Product Features

  • 6” coaxial driver
  • Discreet size
  • Unobtrusive design
  • 16 ohm or 70/100V line operation
  • Range of power taps
  • Wide conical coverage pattern
  • Integrated mounting hardware

Product Specifications

  • TYPE: Two-way, full range, passive, ceiling speaker
  • FREQUENCY RESPONSE (with preset)
    • 115Hz – 18kHz ± 3dB
    • -10dB @ 80Hz
  • DRIVERS:
    • LF: 6.5” (162mm), Coated paper
    • HF: 1” (25mm) exit/ 0.7” (20mm) Metal dome
  • RATED POWER: 60W (AES) 120W (Peak)
  • NOMINAL IMPEDANCE: 16Ω
  • SENSITIVITY (1W/1m): 90dB
  • MAXIMUM SPL: 108dB (cont), 111dB (peak)
  • CROSSOVER: 2.7kHz passive
  • RECOMMENDED HIGH-PASS FILTER: 24dB/octave @ 80Hz
  • TRANSFORMER TAPS @ 70V: 60, 30, 15, 7.5W
  • TRANSFORMER TAPS @ 100V: 60, 30, 15W
  • DISPERSION (-6dB): 110˚ conical
  • BACK CAN: Zinc-plated Steel
  • BAFFLE: ABS
  • PROTECTIVE GRILLE: Perforated steel with cloth backing
  • FIRE RATING: UL94-V0
  • CONNECTORS: 4 Pin Euroblock with link out
  • FITTINGS: C-ring support backing plate
  • DIMENSIONS (inc. Grille)
    • (Ø) 251mm x (D) 205.1mm
    • (Ø) 9.88” x (D) 8.08”
  • CUT-OUT DIAMETER: 222mm (8.74”)
  • WEIGHT: 3.0kg (6.6lbs)
Product form

Main Features 6” coaxial driver Discreet size Unobtrusive design 16 ohm or 70/100V line operation Range of power taps Wide... Read more

SKU: 131138

£174.00

    • 2 years warranty and 30 days returns
    • Spread your payment using Klarna without fees
    Icon for truckDelivery: 2-3 working days

    Description

    Main Features

    • 6” coaxial driver
    • Discreet size
    • Unobtrusive design
    • 16 ohm or 70/100V line operation
    • Range of power taps
    • Wide conical coverage pattern

    Up 6 Two-Way 6" Ceiling Speaker with Backcan 60W @ 100V White

    Up 6 is a no-compromise two-way, passive 6” ceiling speaker delivering consistent coverage and full frequency sound to a wide range of cost conscious, commercial environments that require higher sound pressure levels from hotels and concourses to retail outlets, bars and restaurants.

    An integral fixing system is included to achieve a simple and clean installation. Up 6 has a steel back can, perforated steel grill and is finished in neutral white.

    Up 6 features a 6” (162mm) low frequency driver paired with a 0.7″ (20mm) metal dome tweeter. It is suitable for both high quality speech and music reproduction. A conical 110° coverage pattern delivers consistent, high performance sound where it needs to go.

    Each Up 6 can be run on a series of 70 or 100 Volt taps or at low impedance. The 16 ohm setting allows up to four units to be connected to each amplifier channel at low impedance. Tap selection is via a rotary switch behind the removable grille.

    SmartAmps or Zone will provide optimal performance and loudspeaker protection. When coupled with the Zone series, a ZonePad and the WebApp makes setting up a system and end user control simple and intuitive.

    Product Features

    • 6” coaxial driver
    • Discreet size
    • Unobtrusive design
    • 16 ohm or 70/100V line operation
    • Range of power taps
    • Wide conical coverage pattern
    • Integrated mounting hardware

    Product Specifications

    • TYPE: Two-way, full range, passive, ceiling speaker
    • FREQUENCY RESPONSE (with preset)
      • 115Hz – 18kHz ± 3dB
      • -10dB @ 80Hz
    • DRIVERS:
      • LF: 6.5” (162mm), Coated paper
      • HF: 1” (25mm) exit/ 0.7” (20mm) Metal dome
    • RATED POWER: 60W (AES) 120W (Peak)
    • NOMINAL IMPEDANCE: 16Ω
    • SENSITIVITY (1W/1m): 90dB
    • MAXIMUM SPL: 108dB (cont), 111dB (peak)
    • CROSSOVER: 2.7kHz passive
    • RECOMMENDED HIGH-PASS FILTER: 24dB/octave @ 80Hz
    • TRANSFORMER TAPS @ 70V: 60, 30, 15, 7.5W
    • TRANSFORMER TAPS @ 100V: 60, 30, 15W
    • DISPERSION (-6dB): 110˚ conical
    • BACK CAN: Zinc-plated Steel
    • BAFFLE: ABS
    • PROTECTIVE GRILLE: Perforated steel with cloth backing
    • FIRE RATING: UL94-V0
    • CONNECTORS: 4 Pin Euroblock with link out
    • FITTINGS: C-ring support backing plate
    • DIMENSIONS (inc. Grille)
      • (Ø) 251mm x (D) 205.1mm
      • (Ø) 9.88” x (D) 8.08”
    • CUT-OUT DIAMETER: 222mm (8.74”)
    • WEIGHT: 3.0kg (6.6lbs)

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account