Power Amplifiers

Elevate your sound experience with the Martin Audio VIA2004 4 Channel Class D Power Amplifier. Delivering a total power output of 2000 Watts across four channels, this advanced amplifier is designed to take your audio to new heights. Ideal for venues such as bars, auditoriums, and HoW, the VIA2004 is the perfect choice for small to medium-scale sound reinforcement and club use. Benefit from its efficient Class D amplification technology, which not only reduces energy consumption but also ensures the power reserves needed for exceptional sound quality. The lightweight and compact 2U rack height design makes it versatile for fixed installations or portable applications. Trust in the VIA2004's comprehensive protection functions to maintain safe operating conditions and deliver consistent audio performance. With a variable speed cooling fan and front-to-back airflow, temperature regulation is optimal even in ambient temperatures up to 40°C. Pair the VIA2004 with the Martin Audio DX0.5 or DX4.0 system processor for seamless integration and control under VU-NET. Take advantage of cost-effective scalability and resolution with this powerful amplifier from Martin Audio.Specifications:- Channels: 4- Power Output: 500W per channel @ 4Ω- Total Power Output: 2000 Watts- Rack Height: 2UProduct Specifications General TYPE: Four-channel Class D amplifier POWER OUTPUT: 4 x 500W into 4 ohms 4 x 250W into 8 ohms COOLING: Vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (105°F) ANALOGUE IN/LINK (4 CHANNELS): 4 x female, 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 5 kΩ typical, balanced MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 FREQUENCY RESPONSE: 20Hz - 20kHz +/- 0.45dB, 4 ohm load TOTAL HARMONIC DISTORTION: 0.003% typical, 1kHz @ 1W POWER SUPPLY: 2 x high current, high frequency switch-mode AC OPERATING RANGE: 100-240V +/-10% 45 - 65Hz MAINS CONNECTOR: 1 x Neutrik Powercon™ TOTAL SYSTEM EFFICIENCY: 89% (4 x 250W into 8 ohms) Physical & Dimensions Height: 88mm Width: 482mm Depth: 441mm Weight: 8kg

Read more less

- Four channels of efficient Class D amplification- High power density in 2U rack height- Advanced DSP and network control for superb audio performanceExperience unparalleled power and performance with the Martin Audio iKon iK42 4 Channel Class D Amplifier. This advanced amplifier is a game-changer in the world of audio equipment, offering a combination of high power density, state-of-the-art DSP, and network control capabilities.With four channels of efficient Class D amplification, the iK42 delivers up to 3000W per channel @ 4Ω, making it ideal for a wide range of audio setups. Its compact 2U rack height design ensures high power density without taking up too much space in your setup.The iK42 is not just about power - it's about precision and control. The high-performance 96kHz DSP on all inputs and outputs, along with up to 1000 FIR filter taps @ 48kHz on each output channel, ensures maximum performance and compatibility with Martin Audio Wavefront Precision line arrays and XE Series stage monitors.Whether you're looking to amplify a Martin Audio loudspeaker range or provide multi-channel amplification for live events, the iKon iK42 is the ultimate choice. With Ethernet for remote control and monitoring, as well as a user-friendly front panel interface, this amplifier offers the perfect blend of power, control, and flexibility. Elevate your audio experience with the Martin Audio iKon iK42 4 Channel Class D Amplifier.Product Specifications GENERAL TYPE: Four-channel Class D amplifier POWER OUTPUT (*): 5000W into 2Ω 3000W into 4Ω 1500W into 8Ω 10000W bridged per channel pair, 4Ω CV LINE OUTPUT (*): 1250W, 25V line 3500W, 70V line 5000W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Elevate your audio setup to unparalleled levels with the Martin Audio iKon iK81 8 Channel Class D Amplifier. This advanced amplifier features eight channels of efficient Class D amplification, delivering a total power output of 10,000 Watts in a compact 2U rack height. Perfect for powering Martin Audio Wavefront Precision WPM line arrays and multi-channel setups across the Martin Audio loudspeaker range, the iK81 ensures exceptional audio performance. Equipped with a sophisticated 96kHz DSP on all inputs and outputs, the amplifier guarantees pristine sound quality with up to 1000 FIR filter taps at 48kHz on each output channel. The high efficiency of this amplifier not only reduces energy consumption but also maintains the necessary power reserves for outstanding sound reproduction in challenging live environments. With Ethernet connectivity for system remote control and monitoring via Martin Audio's VU-NET software, this amplifier offers top-tier performance and reliability. Immerse yourself in a world of precision, power, and cutting-edge technology with the Martin Audio iKon iK81.Specifications:- Power Output: 1250W per channel into 2, 4, or 8 ohms with all channels driven- Rack Height: 2U- DSP: 96kHz DSP on all inputs and outputs, up to 1000 FIR filter taps at 48kHz on each output channel- Connectivity: Ethernet for system remote control and monitoringProduct Specifications GENERAL TYPE: Eight-channel Class D amplifier POWER OUTPUT (*): 1250W into 2Ω 1250W into 4Ω 1250W into 8Ω 2500W bridged per channel pair, 4Ω or 8Ω CV LINE OUTPUT (*): 625W, 25V line 1250W, 70V line 1250W, 100V line DIGITAL SIGNAL PROCESSING: 96kHz/48kHz DSP on all inputs and outputs COOLING: Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE: 40°C (104°F) AUDIO INPUTS/OUTPUTS ANALOGUE IN/LINK (4 CHANNELS): 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE: 20kΩ balanced to ground MAXIMUM ANALOGUE INPUT LEVEL: +20dBu AES3 IN/LINK (2 CHANNELS): 1 x female, 1 x male Neutrik™ XLR, balanced AMPLIFIER OUTPUTS: 4 x Neutrik Speakon™ NL4 AUDIO PERFORMANCE DYNAMIC RANGE: >113dBA, analogue input FREQUENCY RESPONSE: 7Hz-30kHz (‐2.5dB points, 4Ω load) TOTAL HARMONIC DISTORTION: <0.05% typical @ 1kHz, 4Ω load SLEW RATE: >60V per microsecond DAMPING FACTOR: >800 at amplifier output, ref 8Ω CONTROL AND MONITORING NETWORK PROTOCOL: Ethernet CONTROL APPLICATION: Martin Audio VU-NET™ DIGITAL SIGNAL PROCESSING SAMPLE RATE: 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS: 4 x analogue 2 x AES DRIVE MODULE INPUT DSP: Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP: Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters POWER SUPPLY TYPE: High performance Series Resonant AC INPUT OPERATING RANGE: 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT: 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR: Neutrik 32A Powercon™ PHYSICAL DIMENSIONS: (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT: 12.5kg (27.5lbs)

Read more less

Step into the realm of professional audio excellence with the Lab Gruppen IPX 2400 2-Channel Compact Power Amplifier with DSP 2x1200W. This powerhouse amplifier, designed for touring applications, offers a compact yet formidable solution for your sound reinforcement needs. Delivering a total output of 2,400 Watts across 2 channels, the IPX 2400 guarantees unparalleled performance in a single rack space. Harness the highly advanced DSP of this amplifier with 40 real-time multi-slope Parametric EQ's and 100 user presets, granting you the flexibility to fine-tune your sound system to perfection. The networked control via touchscreen user interface adds a modern touch, enabling intuitive operation and seamless integration into your setup. Prioritising efficiency and protection, the IPX 2400 features Speaker Protect Limiter for loudspeaker system safety and low mains current draw with IDEEA technology for power conservation without sacrificing performance. Whether you're establishing a permanent installation, portable corporate AV system, or live PA setup, the Lab Gruppen IPX 2400 stands as the ultimate choice for those seeking top-tier audio amplification. Elevate your sound experience with the IPX 2400 – where power meets precision.Specifications:- Total Output: 2,400 Watts- Channels: 2- DSP: Advanced with 40 real-time multi-slope Parametric EQ's- User Presets: 100- Interface: Touchscreen user interface- Speaker Protect Limiter: Yes- Power Draw Technology: IDEEAProduct Specifications Maximum Output Power 2 Ω per channel, stereo: 800 W 4 Ω per channel, stereo: 1200 W 8 Ω per channel, stereo: 600 W Controls Front: Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel) System Number of channels: 2 Output voltage: 100 V peak / 70 Vrms / 39.2 dBu Input sensitivity for maximum output voltage: 6 dBu Output current: 20 Arms Output circuit type: Class-D THD+N < 0.1%, 20 Hz - 20 kHz @ 1 W < 0.05% @ 1 kHz, 1 dB below clip Output noise: -65 dBu, A-weighted Signal-to-noise: > 104 dB Channel crosstalk: > 80dB @ 1 kHz Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 dB Common mode rejection (CMR): > 50 dB Gain (all DSP controls set to 0 dB): 33 dB Indicators Power: Red LED Limit, per channel: Red LED Signal / mute, per channel: Green/Red LED

Read more less

Elevate your audio experience with the Lab Gruppen IPX 1200 2-Channel Compact Power Amplifier with DSP 2x600W. Designed for touring applications, this powerhouse amplifier offers a compact yet robust solution for various audio needs. With a high power density and competitive cost, the IPX 1200 delivers 2 x 600W at 4 ohms, ensuring reliable power and performance in a single rack space.Experience unparalleled audio control with the highly advanced DSP featuring 40 real-time multi-slope Parametric EQ's. Customise your sound with adjustable gain, input, and output delay, as well as high- and low-pass filters adjustable to any frequency. The innovative software-controlled Speaker Protect Limiter provides extensive protection for your loudspeaker system, ensuring peace of mind during performances.Take command of your audio setup with networked control via the touchscreen user interface. Access all setup parameters, input mixing, DSP features, and limiter settings with ease. With 100 user-defined presets available for system configuration and setup, the IPX 1200 offers unparalleled flexibility and convenience.Key Specifications:- Wattage: 2 x 600W- Number of Channels: 2- DSP Control: Yes- Parametric EQ's: 40 real-time multi-slope- Input/Output: Adjustable gain, delay, high- and low-pass filters- Speaker Protect Limiter: Yes- User-defined Presets: 100- Connectivity: Networked control via touchscreen user interfaceProduct Specifications Maximum Output Power 2 Ω per channel, stereo: 500 W 4 Ω per channel, stereo: 600 W 8 Ω per channel, stereo: 300 W Controls Front: Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel) System Number of channels: 2 Output voltage: 70 V peak / 50 Vrms / 36.2 dBu Input sensitivity for maximum output voltage: 6 dBu Output current: 16 Arms Output circuit type: Class-D THD+N: < 0.1%, 20 Hz - 20 kHz @ 1 W < 0.05% @ 1 kHz, 1 dB below clip Output noise: -66 dBu, A-weighted Signal-to-noise: > 102 dB Channel crosstalk: > 80dB @ 1 kHz Frequency response: 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 d Common mode rejection (CMR): > 50 dB Gain (all DSP controls set to 0 dB): 30 dB Indicators Power: Red LED Limit, per channel: Red LED Signal / mute, per channel: Green/Red LED

Read more less

Elevate your sound system to new heights with the Lab Gruppen E10:4 Energy Efficient Class-D Amplifier. This powerhouse boasts a 1,000W amplifier with 4 flexible output channels in a compact 1U rack unit, delivering unparalleled performance and efficiency. The ultra-compact size saves valuable rack space while ensuring optimal power without compromise. With IntelliDrive Energy Efficient Amplifier technology (IDEEA) and Rail Sensing Limiter (RSL), experience crystal-clear sound, minimal distortion, and reduced signal clipping. The IDEEA technology maximises power levels with minimal mains current draw, offering a smart and energy-efficient solution for any installation. The RSL feature optimises each output channel for high-quality audio output under all load conditions. With the Lab Gruppen E10:4, enjoy a premium audio experience with smart green credentials and a low lifetime cost of ownership.Specifications:- Power: 1,000W- Output Channels: 4x250W- Size: 19" 1U- Technology: IntelliDrive Energy Efficient Amplifier (IDEEA), Rail Sensing Limiter (RSL)Product Specifications General Number of amplifier channels: 4 Total output all channels driven: 1000 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 14 Arms Max output power (all channels driven) 2 ohms: N.R. 4 ohms: 250 W 8 ohms: 250 W 16 ohms: 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W) 70 V: 250 W 100 V: Can deliver 250 W to a 100 V load tapped at 500 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: > 70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 63.2 V Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 3 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 31.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Switches Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Two fans, front-rear airflow, temperature controlled speed Power Nominal voltage: 100 - 240 VAC Operating voltage: 85 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”) Weight Weight: 6.2 kg (13.7 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, ANSI/UL 60065 (ETL), CSA, CCC, PSE, Energy Star

Read more less

Experience unparalleled efficiency and performance with the Lab Gruppen E12:2 Energy Efficient Class-D Amplifier. This powerful 1,200W amplifier, in a compact 19" 1U design, delivers exceptional audio quality while conserving valuable rack space. Energy Star 2.1 compliant, this amplifier boasts supreme green credentials and remarkably low lifetime running costs, making it the environmentally conscious choice for any audio setup. The innovative IntelliDrive technology allows customisation of the output channels, delivering 2 x 600W at either constant voltage 70V or low impedance (2, 4, and 8 Ohms) as required. With comprehensive circuit protection, fault indication, and efficient cooling, the Lab Gruppen E12:2 ensures rock-solid durability and reliability for your audio needs. Elevate your sound experience with cutting-edge technology and exceptional performance.Specifications:- Power output: 2 x 600W- Rack Size: 19" 1U- Energy Star 2.1 compliant- Output Channels: 2- Amplifier Class: Class-D- Customisable Output: Constant voltage 70V or low impedance (2, 4, and 8 Ohms)- Circuit Protection: Comprehensive- Cooling: EfficientProduct Specifications General Number of amplifier channels: 2 Max total output all channels driven: 1200 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 18 Arms Max output power (all channels driven) 2 ohms: 600 W 4 ohms: 600 W 8 ohms: 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W) 16 ohms: 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W) 70 V: 600 W 100 V: Can deliver 600 W to a 100 V load tapped at 1200 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 69.3 V Sensitivity for stated power into 4 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 2 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 8 Ohm in 70 V mode: 3.8 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 4 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 32 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

- Energy efficient Class-D amplifier with 2x200W output channels- Certified Energy Star 2.1 compliant for supreme green credentials- Compact size and high operating efficiency for cost-effective installation solutionsExperience the pinnacle of energy efficiency and sonic excellence with the Lab Gruppen E4:2 Energy Efficient Class-D Amplifier. This amplifier boasts a powerful 400W output spread across 2 flexible channels, all housed in a sleek 19" 1U rack unit. With Energy Star 2.1 certification, this amplifier guarantees exceptionally low lifetime running costs while reducing your carbon footprint. The E4:2 features Lab Gruppen's innovative IDEEA technology, delivering high power levels with minimal distortion and power consumption. Its Rail Sensing Limiter (RSL™) ensures top-notch audio quality by reducing signal clipping, while allowing for user configuration between Hi-Z and Lo-Z outputs. This flexibility extends to asymmetric loading of channels, optimising performance and efficiency. Ideal for installations where space and cost are crucial factors, the Lab Gruppen E4:2 Energy Efficient Class-D Amplifier is the perfect choice for those seeking a balance between performance, energy efficiency, and cost-effectiveness. Elevate your audio setup with the E4:2 and enjoy premium sound quality while saving on operating costs in the long run.Product Specifications General Number of amplifier channels: 2 Max total output all channels driven: 400 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 11 Arms Max output power (all channels driven) 2 ohms: 200 W 4 ohms: 200 W 8 ohms: 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W) 16 ohms: 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W) 70 V: 200 W 100 V: Can deliver 200 W to a 100 V load tapped at 400 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 40 V Sensitivity for stated power into 4 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 2 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 8 Ohm in 70 V mode: -0.9 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 2.1 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 27.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output: Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

Elevate your audio experience with the Lab Gruppen E2:2 Energy Efficient Class-D Amplifier. This cutting-edge amplifier is more than just a sound powerhouse; it is a game-changer in the realm of audio technology. Boasting Energy Star certification, the Lab Gruppen E2:2 sets the standard for green credentials, ensuring not only exceptional performance but also a sustainable choice for sound aficionados. Its versatile IntelliDrive technology allows for delivering 2 x 100W at a constant voltage of 70V or across low impedance ranges of 2, 4, and 8 Ohms, providing unparalleled flexibility in sound system configurations. The amplifier's fail-safe circuit protection guarantees reliable performance and durability, offering peace of mind while enjoying top-notch audio quality. Key Specifications:- Power Output: 2x100W- Amp Class: Class-D- Voltage Output: 70V- Impedance Compatibility: 2, 4, and 8 Ohms- Dimensions: 19" x 1UProduct Specifications General Number of amplifier channels: 2 Total output all channels driven: 200 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 7.7 Arms Max output power (all channels driven) 2 ohms: N.R. 4 ohms: 100 W 8 ohms: 100 W 16 ohms: 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W) 70 V: 100 W 100 V: Can deliver 100 W to a 100 V load tapped at 200 W Performance THD 20 Hz - 20 kHz at 1 W: <0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: >70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V VPL for 70 V mode: 100 V VPL for Lo-Z mode: 40 V Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: -0.9 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 27.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Buttons Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed Power Nominal voltage: 100 – 240 VAC Operating voltage: 70 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) Weight Weight: 4.2 kg (9.3 lbs) Approvals Approvals: CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Read more less

Discover unmatched audio performance and energy efficiency with the Lab Gruppen CA2401 Commercial Amplifier. This 240 Watt powerhouse is expertly designed to cater to the demands of commercial and industrial settings, providing exceptional sound quality across a variety of speaker configurations. Whether you require a background music system for a retail space or a public address system for a corporate environment, the Lab Gruppen CA2401 is the perfect solution for your audio needs. Crafted with Energy Star certified design, this amplifier not only delivers impressive sound but also contributes to energy conservation, reducing operational costs and making it an environmentally sustainable choice for businesses. Its direct drive, constant power technology ensures consistent performance and reliability, while the GPI remote volume control and individual front panel controls allow for convenient adjustments according to your preferences. Versatile and easy to install, the Lab Gruppen CA2401 is ideal for a range of venues, from bars and restaurants to hotels and educational institutions. Its sleek 1U rack-mountable design, complete with joining brackets for various mounting options, adds practicality to its exceptional functionality. Elevate your audio experience and save on energy costs with the Lab Gruppen CA2401 Commercial Amplifier.- Power: 240 Watts- Loudspeaker Configurations: Low-Z (4/8 Ohm) and High-Z (70/100 V)- Energy Star Certified- Direct Drive, Constant Power Technology- GPI Remote Volume ControlProduct Specifications Maximum Output Power 4 Ω per channel: 240 W 8 Ω per channel: 240 W 70 V per channel: 240 W 100 V per channel: 240 W Number of Output Channels Number: 1 Minimum Load Impedance 4 Ω mode: 4 Ω 8 Ω mode: 8 Ω 70 V output mode: 20 Ω 100 V output mode: 41 Ω Controls Front: Power standby button, gain control, tone controls - bass and treble Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter Tone Controls Bass: ±10 dB @ 100 Hz Treble: ±10 dB @ 10 kHz Indicators Power: On (blue), force standby (red), sleep (yellow) Master Signal (green LED): >12.3 mV (-36 dBu) Limit (red LED): Input clip, output limit Fault (red LED): Overheat, DC fault, over current, etc System Inputs: 1 x 3-pin 5.08 mm Euroblock connector 1 x RCA stereo summed Input impedance: 10 kΩ unbalanced and RCA, 20 kΩ balanced Input sensitive: Balanced: 1.23 V (+4 dBu) RCA: 0.62 V (-2 dBu) each for mono sum RCA Maximum input level: 9.75 V (+22 dBu) Outputs: 1 x 2-pin 5.08 mm Euroblock connector Output circuit type: Class D Remote connector: 1 x RJ45 connector Performance Distortion, 1/8 rated power: <0.05% Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB Crosstalk (2 channel models): >85 dB Signal-to-noise: >97 dBA High-pass filter: 80 Hz HPF Circuit Protection Cooling: Convection-cooled, fanless Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection Load protection: Controlled start and shutdown behaviour, DC-fault protection Power Supply, Voltage (Fuse) Main voltage: 100-240 V~, 50/60 Hz with active power factor correction Fuse: T 6.3 A L 250 V Power consumption 1/8th rated power @ 4 Ω: 70 W Mains connector: Standard IEC connector Physical and Dimensions Dimensions (H x W x D): 44 x 218 x 299 mm (1.7 x 8.6 x 11.8") Weight: 2.4 kg (5.3 lbs) Finish: Brushed black anodized aluminium chassis with black painted steel bottom Approvals: CE, cTUVus, PSE, CCC, RoHS, FCC part 15 Class B and Energy Star 3.0

Read more less

Experience unmatched sound quality and performance with the Gemini XGA-5000 2-Channel Power Amplifier. This powerful amplifier delivers a crystal-clear sound output of 2 x 300W @ 4Ω, making it perfect for professional sound systems. Boasting a durable construction, this amplifier ensures consistent, reliable performance night after night. The efficient cooling technology incorporated in its design reduces maintenance needs, making it an ideal choice for professional sound system applications. With features like XLR and 1/4" balanced inputs, Stereo and Mono Bridge modes, and comprehensive front panel indicators, the Gemini XGA-5000 offers exceptional amplification performance at a remarkable value. Elevate your sound system with the Gemini XGA-5000 and enjoy the perfect blend of exceptional sound quality and power for all your events.Key Features:- Brand: Gemini- Channels: 2- Power Output: 2 x 300W @ 4Ω- Input Connectors: XLR, 1/4" Balanced- Modes: Stereo, Mono Bridge- Construction: Durable and Reliable- Cooling Technology: Efficient- Front Panel Indicators: ComprehensiveProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse: 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 400W RMS Output Stereo 4 Ω: 2 x 550W RMS Output Bridged 8 Ω: 1100W RMS Dimensions (WxDxH): 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight: 26.8 lbs (12.1 kg)

Read more less

Elevate your sound system with the Gemini XGA-4000 2-Channel Power Amplifier, offering a potent 2 x 250W @ 4Ω output to ensure robust and clear sound performance. This amplifier is crafted for professional audio applications and guarantees thermal stability and reliability with its efficient front-to-rear airflow and cooling fan technology. With the versatility of Stereo and Mono Bridge options, you have the flexibility to configure your setup according to your preferences. The comprehensive front panel indicators provide easy monitoring and adjustment ensuring optimal sound quality. Weighing just 25 lbs, it is lightweight for easy transportation yet durable for long-lasting reliability. Unleash the full potential of your audio system with the Gemini XGA-4000, combining professional amplification performance with exceptional value.Specifications:- Power Output: 2 x 250W @ 4Ω- Design: 2-Channel, 2U- Airflow: Front-to-Rear- Cooling: Cooling Fan- Setup Options: Stereo and Mono Bridge- Weight: 25 lbsProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse: 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 250W RMS Output Stereo 4 Ω: 2 x 350W RMS Output Bridged 8 Ω: 700W RMS Dimensions (WxDxH): 19” x 13.8” x 3.5” (482mm x 350mm x 88mm) Net Weight: 23.4 lbs (10.6 kg)

Read more less

- Delivering professional amplification performance with 2 x 175W @ 4Ω output- Ensuring thermal stability and reliability with front-to-rear airflow and cooling fan- Offering versatility with Stereo and Mono Bridge options, along with comprehensive front panel indicatorsExperience unmatched professional sound quality and power with the Gemini XGA-3000 2-Channel Power Amplifier. This powerhouse amplifier boasts 2 x 175W @ 4Ω output, providing you with the perfect solution for your sound system needs. With front-to-rear airflow and a cooling fan, this amplifier guarantees thermal stability and reliability, ensuring consistent performance night after night.The XGA-3000 is not just about power; it offers versatility with its balanced Stereo and Mono Bridge options, allowing you to tailor your sound to your specific requirements. The constant speed fan ensures low noise operation, while the comprehensive front panel indicators keep you informed with signal, clip, protect, and bridge status.Built for the professional sound system application, this amplifier is lightweight at just 19 lbs, making it easy to transport and set up for any event. The durable construction and efficient cooling technology of the XGA-3000 make it a reliable unit with low maintenance needs. Elevate your sound experience and choose the Gemini XGA-3000 for exceptional performance and great value.Product Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise (LF/HF): >90dB THD (LF/HF): > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor (F=1kHz 8Ω): >350 Input Impedance: 20K Ω Fuse 5mm x 20mm: AC 115v/230v 50~60Hz Output Stereo 8 Ω: 2 x 150W RMS Output Stereo 4 Ω: 2 x 200W RMS Output Bridged 8 Ω: 400W RMS Dimensions (WxDxH mm): 482 x 350 x 88 Weight: 8.6kg

Read more less

Introducing the Gemini XGA-2000 Professional 2-Channel Power Amplifier, a powerhouse of performance and reliability designed for the discerning audio enthusiast. This amplifier is engineered to deliver 2 x 125W @ 4Ω of professional amplification performance in a sturdy 2U construction. Enjoy the versatility of XLR and ¼” balanced Stereo and Mono Bridge inputs, along with a comprehensive set of front-panel indicators ensuring intuitive operation. The front-to-rear airflow technology, coupled with cooling fan technology, guarantees thermal stability and reliability, allowing for consistent performance night after night. With 3 Speakon outputs for Channels A/B/Bridge, this amplifier offers flexibility and convenience in connecting your speakers. Step up your sound game with the Gemini XGA-2000 2-Channel Power Amplifier.Specifications:- Power Output: 2 x 125W @ 4Ω- Construction: 2U- Inputs: XLR and ¼” balanced Stereo and Mono Bridge- Outputs: 3 Speakon outputs for Channels A/B/BridgeProduct Specifications Frequency Response: 10Hz ~ 50kHz ±1.5dB Signal to Noise: (LF / HF) >90dB THD: (LF / HF) > 0.1% Input Sensitivity: 0.77v Maximum Input Level: 21dBv/9v Damping Factor: (F=1kHz 8Ω) >350 Input Impedance: 20K Ω Fuse 5mm x 20mm AC 115v/230v 50~60Hz Output Stereo: 8 Ω 2 x 90W RMS Output Bridged: 8 Ω 250W RMS Dimensions: 482 x 350 x 88 mm Weight: 7.98kg

Read more less

Experience unparalleled audio performance and reliability with the Electro-Voice PA2400T 2 Channel 100V Line Amplifier. This premium amplifier is designed to meet the demands of various installation applications, providing efficient performance for both low impedance and distributed systems. Ideal for sound reinforcement, paging, and life safety applications, the PA2400T delivers a powerful output of 400W per channel for 4 Ω or 70/100 V lines, ensuring your audio needs are met with exceptional clarity and strength.The compact 2U design of the amplifier allows for easy integration into your setup, while the stepped rear-panel level attenuation provides precise control over sound output. The bridged mono out feature impressively delivers 860W into 8 Ω, ensuring that your audio is projected loud and clear.With built-in protection circuits such as Thermal Overload Protection and Dynamic Audio Limiters, the PA2400T safeguards your amplifier and connected loudspeaker systems from potential damage. This amplifier also offers a selectable high-pass filter and low-noise high-performance fans for optimal audio quality and thermal stability, making it a reliable choice for any installation.Invest in the Electro-Voice PA2400T 2 Channel 100V Line Amplifier for exceptional value, versatility, and peace of mind in your audio setup. Elevate your sound reinforcement, paging, and public address systems with this reliable and high-performance amplifier.Key Specifications:- Power Output: 2x400W/100V- Channels: 2- Construction: 2U rack-mountable design- Protection Circuits: Thermal Overload Protection, Dynamic Audio Limiters- Special Features: Bridged mono out feature, selectable high-pass filter, low-noise high-performance fans- Amplifier Type: 100V Line AmplifierProduct Specifications General Amplifier Gain: 34 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 430 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 215 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz -1dB, ref. 1kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 400/200 W 70V/100V-400 Rated output power (*rated load) THD < 1%, 1kHz: 430/215 W 70V/100V-430 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 25 V/µs 70V-46, 100V-65 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 26kg

Read more less

- Efficient performance for low impedance or distributed systems- Ideal for sound reinforcement, paging, and life safety applications- Comprehensive protection circuits to safeguard the power amplifier and connected loudspeaker systemsStep into the world of professional audio amplification with the Electro-Voice PA2250T 2-Channel 100V-Line Amplifier. Designed for optimal performance in low impedance or distributed systems, this amplifier delivers efficient power output suitable for a range of applications, from sound reinforcement to paging and life safety announcements.Experience peace of mind knowing that your audio system is protected by a host of safety features, including Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection. The integrated hi-pass filters allow you to tailor your sound by attenuating unwanted low-frequency signals, while the stepped rear-panel level attenuation gives you precise control over your audio output.Compact yet powerful, the PA2250T offers 250W per channel for 4 Ω or 70/100 V lines, with a bridged mono out option for a whopping 540W into 8 Ω. The 2 RU design ensures easy integration into your setup, while the three-stage front-to-rear fans provide optimal thermal stability without compromising on noise levels. With phoenix-type inputs and outputs for secure connections and integrated rack ears for direct mounting, this amplifier is a reliable and versatile choice for your audio needs. Elevate your sound system with the Electro-Voice PA2250T and enjoy professional-grade performance with peace of mind.Product Specifications General Amplifier Gain: 34.3 dB Continuous Rated Power (1 kHz, THD 1%) 100v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 70v: 270 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 135 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 100v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 70v: 250 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 125 Watts Crosstalk: < < -75 dB DIM 30: < 0.1 % Frequency Response: 65Hz - 40kHz Impedance: 4/8 Ω 70V/100V Input Impedance (Balanced): > 20 kΩ Input Sensitivity: 0 dBu (775mV) @ rated output power or voltage, 1kHz Intermodulation Distortion (SMPTE): < 0.1 % Network Control (IRIS-Net): No Number of Channels: 2 Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz: 250/125 W 70V/100V-250 Rated output power (*rated load) THD < 1%, 1kHz: 270/135 W 70V/100V-270 Signal-to-Noise Ratio (A-weighted): 103 dB Slew Rate: 18 V/µs 70V-41, 100V-61 Total Harmonic Distortion: < 0.1 % Physical & Dimensions Height: 2RU 88mm Width: 483mm Depth: 406mm Weight: 23.5kg

Read more less

Step into a realm of unparalleled audio excellence with the Electro-Voice CPS2.6-II Installation Power Amp. This 2U power amplifier, designed for audio professionals and contractors, is a game-changer for sound systems, delivering up to 2 x 900W into 2 ohms with exceptional clarity and precision. Secure Phoenix-type input and output connections, along with rear-mounted attenuators, provide full control over audio levels. The optional RCM-810 card enables advanced networking features, allowing seamless control via IRIS-Net software. Experience optimal sound quality with the switchable 50 Hz high-pass filter, complemented by a complete protection package, three-stage front-to-rear fans, and Class-AB design for safety and longevity. Elevate your audio setup with this reliable and efficient power amp.Specifications:- Power Output: 2 x 900W @ 2 ohms- Inputs: Phoenix-type- Networking: Optional RCM-810 Card- Control: IRIS-Net Software- High-Pass Filter: 50 Hz (switchable)- Cooling: Three-stage front-to-rear fans- Design: Class-AB- Protection: Complete protection packageProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 900 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 600 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 380 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 500 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 250 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.02 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +3.1 dBu (1.11Vrms) Intermodulation Distortion (SMPTE): 0.05 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1800 Watts Maximum Bridged Output 8Ω: 1200 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional Slew Rate: 26 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 14.8kg

Read more less

Elevate your audio projects with the Electro-Voice CPS2.4-II Installation Power Amp. This robust 2-RU amplifier delivers up to 2 x 650W into 2 ohms, ensuring powerful and clear sound performance for audio installations. Featuring versatile Phoenix-type input and output connections, a switchable 50 Hz high-pass filter, and a complete protection package, this amplifier offers reliability and flexibility for any project. The CPS2.4-II provides advanced control and cooling capabilities with programmable time for custom power-on delay settings, a module slot for the optional RCM-810 card, and three-stage front-to-rear fans. Ideal for contractors and professionals, the Electro-Voice CPS2.4-II Installation Power Amp offers ease of use and customisation options to enhance your sound system setup. Specifications:- Power Output: 2 x 450W @ 4Ω- Chassis Size: 2UProduct Specifications General Amplifier Gain: 32 dB Analog Inputs: 2, electronically balanced, Phoenix-type Audio Network: No CAN Bus Interface: Optional (RCM-810 card) Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans Crossover Type: Optional Modules DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: 2.2 dBu (1.0V) Intermodulation Distortion (SMPTE): 0.1 % Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured) Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): Optional (RCM-810 card) Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Variable Load Drive (VLD): No Physical & Dimensions Height: 2RU 88.1mm Width: 482.6mm Depth: 421.5mm Weight: 12.6 kg

Read more less

Experience unparalleled value and performance with the Electro-Voice Q44II Class A-B Power Amplifier. Specifically designed for club and mobile systems, this powerful amplifier offers exceptional power and efficiency, making it the ideal choice for a wide range of venues. With up to 650W per channel at 2 ohms, the Q44II delivers outstanding dynamic headroom, ensuring optimal transient response and 30% greater output capability for short-duration signals. The Class A-B design, coupled with dynamic limiting features, prevents output clipping and provides extensive protection against thermal damage and electrical malfunction.The Q44II is built on Electro-Voice's legacy of power and performance, taking amplifier technology to new heights. Whether you're hosting a concert, performance centre event, or sports venue, the Q44II is the perfect amplifier for all sizes of venues. Equipped with XLR pass-through input connections, protective low-cut for systems without subwoofers, and a switchable LPN filter for enhanced tonal fundamentals, this amplifier offers versatility and reliability.The Electro-Voice Q44II Class A-B Power Amplifier features three-stage front-to-rear fans for efficient cooling, ensuring optimal performance even during long durations of use. The compact and affordable design makes the Q44II an excellent choice for any audio setup. Elevate your sound system with the Electro-Voice Q44II Class A-B Power Amplifier and enjoy unparalleled performance and peace of mind.Specifications:- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Dynamic Headroom for superb audio performance- Complete protection package with built-in dynamic limiters- XLR pass-through input connections- Three-stage front-to-rear fans for efficient coolingProduct Specifications General Amplifier Gain: 32 dB Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400 Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200 Watts Cooling: Front-to-Rear, 3-stage fans DIM 30: 0.05 % Electronics Type: Amplifier Frequency Response: 10 Hz - 40 kHz ±1 dB Impedance: 2/4/8 Ω Input Impedance (Balanced): 20 kΩ Input Sensitivity: +2.2 dBu Intermodulation Distortion (SMPTE): 0.1 % Maximum Bridged Output 4Ω: 1300 Watts Maximum Bridged Output 8Ω: 900 Watts Maximum Input Voltage: +21 dBu 8.69 Vrms Network Control (IRIS-Net): No Signal-to-Noise Ratio (A-weighted): 106 dB Slew Rate: 25 V/µs Topology: Class-AB Total Harmonic Distortion: 0.03 % Physical & Dimensions Height: 2RU 88.1 mm (3.47") Width: 483 mm (19.02") Depth: 421.5 mm (16.59") Weight Net: 12.6 kg (27.78 lbs)

Read more less

The Dynacord V600:4 Power Amp offers a total powerTANK capacity of 600W, ensuring reliable and robust performance for small to mid-sized installation scenarios. - Featuring dualCOOL convection cooling and intelligent fan ecoRAIL, this 4-channel amplifier delivers a significant reduction in power consumption, making it an energy-efficient choice for various applications. - The Variable Load Drive (VLD) technology allows the V600:4 to provide the same power output into 4Ω, 8Ω, 70V, or 100V, offering unparalleled flexibility for driving multiple audio zones with different loads. Step into a world of professional audio excellence with the Dynacord V600:4 Power Amp 4Ch 600W powerTANK 4Ω/8Ω/100V 19" 1U. Designed for consultants, installers, and specifiers seeking a versatile and reliable amplifier, the V600:4 is the epitome of cutting-edge technology and performance. With a compact 1U form factor that saves valuable rack space, this amplifier is a powerhouse for various installation scenarios, from education and hospitality to retail and houses of worship. Experience the ultimate in efficiency with dualCOOL convection cooling and intelligent fan ecoRAIL, ensuring optimal performance while minimising power consumption. The Variable Load Drive (VLD) technology empowers the V600:4 to deliver consistent power output across different impedance levels, making it a go-to choice for driving multiple audio zones seamlessly. Say goodbye to energy wastage as the Dynacord powerTANK technology acts as a power reservoir, allowing for asymmetric power distribution as needed. Whether you're setting up a compact zone or a larger auditorium, the Dynacord V600:4 is your ideal companion, offering unparalleled flexibility and ease of installation. Elevate your audio experience and unlock the true potential of your sound system with the Dynacord V600:4 Power Amp - where innovation meets performance effortlessly.Specifications Signal processing:  Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements:  100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology:  Switching power supply with power factor correction Protections:  Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs:  Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V:  4 x 150 W Maximum output power per channel (power sharing):  300 W Total rated output power:  600 W Analog Audio Input: Type:  2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB):  +18 dBu Input impedance, active balanced:  20 kΩ Mains Input:  IEC C14 Loudspeaker output:  2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT:  Galvanic isolated relay, max. 30 VDC / 500 mADC Cooling concept:  Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits:  -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating):  -500 m to +5000 m (-1614 ft to 16404 ft) IEC Protection Class:  Class I (grounded) With 19” mounting brackets 44.2 x 483 x 269.5 mm(1.74 x 19.2 x 10.6 in) Weight:  3.6 kg (7.9 lb) Product Specifications General Signal processing: Input Routing, HPF 24 dB/ Oct., LPF 24 dB/Oct., Flat, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Consumption at 1/8 rated output power 115 W Idle mode (ecoRAIL with no input signal) < 20 W Standby mode (APD active) < 1 W Power supply topology: Switching power supply with power factor correction Protections: Audio limiters, high temperature, DC, HF, short circuit, back‑EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Front status LEDs: Signal, limit, fault LEDs per channel; power LED Rated Power @ 4Ω, 8Ω, 70V, 100V: 4 x 150 W Maximum output power per channel (power sharing): 300 W Total rated output power: 600 W Connectivity Analog Audio Input: Type: 2 x 6‑pin Euroblock, 3.81 mm, male, parallel 1x RJ45 AMP‑LINK Maximum input level (LEVEL 0 dB): +18 dBu Input impedance, active balanced: 20 kΩ Mains Input: IEC C14 Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control Port: Type 1 x 5‑pin Euroblock, 3.81 mm, male REMOTE ON Remote On / Standby contact (overrides power button on front panel) READY/FAULT: Galvanic isolated relay, max. 30 VDC / 500 mADC Climatic conditions Cooling concept: Convection cooling in tabletop application and rack application with spacing between units. Forced cooling (side to rear) in rack application without spacing between units and in extreme thermal conditions. Ambient temperature limits: -5 °C to +45 °C (+23 °F to +113 °F) Altitude (operating): -500 m to +5000 m (-1614 ft to 16404 ft) Enclosure IEC Protection Class: Class I (grounded) Dimensions (HxWxD) With 19” mounting brackets 44.2 x 483 x 269.5 mm (1.74 x 19.2 x 10.6 in) Weight: 3.6 kg (7.9 lb) See Datasheet in Downloads tab for power specifications

Read more less

With a total output capacity of 600 watts, this compact two-channel amplifier Dynacord V600:2 is not only tailored for background music and announcements but also excels whenever higher SPL levels in small to mid-sized fixed installations are required, including educational facilities, hospitality venues, retail areas and houses of worshipThis versatile 2-channel amplifier delivers a total power capacity of 600W, making it perfect for a wide range of applications, from soothing background music to impactful announcements. Engineered for small to mid-sized fixed installations, this powerhouse combines power and efficiency seamlessly. With advanced technologies such as powerTANK, Variable Load Drive (VLD), ecoRAIL, and dualCOOL, this amplifier ensures flexible power usage, reduced energy consumption, and silent operation. The compact half-rack design offers multiple installation options, even in space-limited environments. Say goodbye to bulky amplifiers and embrace the sleek and powerful V600:2 to revolutionise your audio experience.Specifications Total rated output power:  600 W Number of channels:  2 Rated output power1:  2 x 300 W Output power::  4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing):  500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB):  27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB):  > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ):  < 0.1 % Connectivity Type:  1 x 6-pin Euroblock, 3.81 mm, male,parallel 1x RJ45 (AES72-1E) Loudspeaker output:  2 x 4-pin Euroblock, 5.08 mm, female Control port type:  1 x 5-pin Euroblock, 3.81 mm, male Signal processing:  Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements:  100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal):  < 12 W Consumption at 1/8 rated output power:  115 W Standby mode (APD active):  < 1 W Protections:  Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection Product Specifications Electrical Total rated output power: 600 W Number of channels: 2 Rated output power1: 2 x 300 W Output power:: 4 Ω / 8 Ω / 70 V / 100 V Maximum output power per channel (power sharing): 500 W / 600 W / 500 W / 600 W Amplifier 4 Ω / 8 Ω / 70 V / 100 V Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 27.0 dB / 30.0 dB / 33.2 dB / 36.2 dB Signal to Noise Ratio (A‑weighted, ref. to rated output power, LEVEL 0 dB): > -100 dB / > 102 dB / > 101 dB / > 103 dB THD+N (1/8 RATED OUTPUT POWER, 1 KHZ): < 0.1 % Connectivity Type: 1 x 6-pin Euroblock, 3.81 mm, male, parallel 1x RJ45 (AES72-1E) Loudspeaker output: 2 x 4-pin Euroblock, 5.08 mm, female Control port type: 1 x 5-pin Euroblock, 3.81 mm, male General Signal processing: Input Routing, Filter (24 dB/Oct.), Hi-pass 30/50/100/150 Hz, Lo-pass 150 Hz, Peak Limiter Power requirements: 100 V to 240 V, 50 Hz to 60 Hz AC Power consumption: Idle mode (ecoRAIL with no input signal): < 12 W Consumption at 1/8 rated output power: 115 W Standby mode (APD active): < 1 W Protections: Audio limiters, high temperature, DC, HF, short circuit, back-EMF, peak current limiters, inrush current limiters, mains over/under voltage protection See Datasheet in Downloads tab for full specifications

Read more less

Experience unparalleled audio performance with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U. This professional power amplifier delivers a robust output of 2x400W in a compact 2U chassis, ensuring exceptional sound quality for your audio setup. Featuring advanced protection circuits such as Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection, this power amp ensures the safety of both the amplifier and connected loudspeaker systems.With versatile connectivity options including phoenix input plugs for easy installation, a single block plug for all output signals, and bridged mode for multi-channel setups, the Dynacord PCL1240T provides flexibility and convenience in connection. Tailor your sound with the switchable high-pass filter in each channel and make precise audio adjustments using the level controller for each channel. The premium phoenix style screw-lock connectors facilitate a seamless setup process, while the high-performance output transformers offer floating outputs compatible with 50V, 70V, and 100V installations.Elevate your audio experience with the Dynacord PCL1240T Paramus 100V-Line Power Amp 2x400W 2U, designed to meet the demands of professional audio setups.Specifications:- Power Output: 2x400W- Chassis Size: 2U- Protection Circuits: Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, Thermal Overload Protection- Connectivity: Phoenix Input Plugs, Single Block Plug, Bridged Mode- High-Pass Filter: Switchable in Each Channel- Output Transformers: High-Performance for 50V, 70V, and 100V installationsProduct Specifications Please refer to the User Manual for product specifications.

Read more less

Elevate your live music performances to professional levels with the Dynacord L3600FD Live Series DSP Amplifier. This amplifier is engineered for demanding live music applications and is the perfect companion for performing musicians and production companies seeking exceptional sound reinforcement. With a powerful output of 2x1700W @ 4Ω and 2x3000W @ 2Ω, this amplifier ensures unparalleled sound quality, providing plenty of headroom for dynamic performances. The integrated FIR Drive technology and professional speaker processing deliver market-leading acoustic performance and rock-solid reliability, setting a new standard in sound reinforcement. The true 2 ohm stability of the amplifier, along with the intuitive system control software, makes setup and operation effortless. Trust the robust protection circuit to ensure flawless operation in any environment. Experience the best-in-class features of the Dynacord L Series amplifiers at a more accessible price point and take your live performances to the next level with exceptional sound quality and professional performance characteristics.Specifications:- Power Output: 2x1700W @ 4Ω, 2x3000W @ 2Ω- FIR Drive Technology- Professional Speaker Processing- True 2 ohm stability- Intuitive System Control Software- Robust Protection CircuitProduct Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: 2Ω= 3000W; 2.7Ω= 2500W; 4Ω= 1700W; 8Ω= 900W Maximum Output Power, Bridged: 4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Maximum Output Power, Bridged4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current; limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg

Read more less

- Exceptional sound quality with plenty of headroom- True 2 ohm stability for reliable performance- Fully integrated professional speaker processing with FIR Drive technologyExperience unparalleled sound quality and reliability with the Dynacord L2800FD Live Series DSP Amplifier. Engineered for demanding live music applications, this amplifier delivers a powerful performance that is ideal for musicians and production companies alike. With a robust power supply and linear amp design, this amplifier ensures flawless operation even in the most challenging environments.The Dynacord L2800FD features a fully integrated professional speaker processing system with FIR Drive technology, guaranteeing market-leading acoustic performance and rock-solid reliability. Its true 2 ohm stability provides peace of mind during live performances, while the intuitive system control software makes setup and control a breeze. Equipped with an onboard DSP that includes multi-band PEQs, crossovers, limiters, and delay per channel, the Dynacord L2800FD offers advanced features such as true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group. With its exceptional engineering and applied technologies, this amplifier brings professional performance to a more accessible price point, making it a must-have for venues like music clubs, community hall events, performance centers, and sports venues. Elevate your sound reinforcement setup with the Dynacord L2800FD Live Series DSP Amplifier.Product Specifications General Load Impedance: 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: 2Ω= 2200W; 2.7Ω= 1800W; 4Ω= 1300W; 8Ω= 650W; Maximum Output Power, Bridged: 4Ω= 4400W; 8Ω= 2600W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (at 900 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg

Read more less

- Exceptional sound quality and reliability: With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, the Dynacord L1800FD Live Series DSP Amplifier ensures market-leading acoustic performance and rock-solid reliability, making it the perfect choice for demanding live music applications.- Professional speaker processing with FIR Drive technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, providing you with precise control over your sound output for a truly professional performance every time.- Intuitive system control software: Enjoy easy setup and control with the intuitive system control software, allowing you to tailor your sound reinforcement to your specific needs effortlessly.Experience the pinnacle of sound reinforcement with the Dynacord L1800FD Live Series DSP Amplifier. Engineered for live music applications, this amplifier is a must-have for performing musicians and production companies seeking professional-grade performance at an accessible price point. The L Series power amplifiers boast a best-in-class feature set, including true 2 ohm stability and advanced FIR-Drive technology for exceptional sound quality and reliability. With a power output of 2x850W @ 4Ω and 2x1400W @ 2Ω, this amplifier delivers unparalleled performance in venues such as music clubs, community hall events, performance centres, and sports venues. The onboard DSP provides multi-band PEQs, crossovers, limiters, and delay per channel, while the sophisticated protection circuit ensures safe and reliable operation in any environment. Take your live performances to the next level with the Dynacord L1800FD Live Series DSP Amplifier. Elevate your sound, captivate your audience, and unleash your true potential with this professional-grade amplifier.Product Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω= 1600W; 2.6Ω= 1300W; 4Ω= 950W; 8Ω= 480W Maximum Output Power, Dual Channel: 2Ω= 1400W; 2.6Ω= 1200W; 4Ω= 850W; 8Ω= 450W Maximum Output Power, Bridged: 4Ω= 2800W; 8Ω= 1700W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V= T10AH; 120 V/100 V= T20AH Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz) Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg

Read more less

Experience unparalleled sound reinforcement with the Dynacord L1300FD Live Series DSP Amplifier. Designed to elevate live music performances, this amplifier delivers crystal-clear audio quality for professional musicians and production companies. With 2x600W @ 4Ω and 2x1000W @ 2Ω, every note is heard with precision and clarity. The integration of FIR Drive technology and true 2 ohm stability ensures market-leading acoustic performance and rock-solid reliability. The advanced DSP features, including multi-band PEQs, crossovers, limiters, and delay per channel, allow for precise sound adjustments. The amplifier's true channel grouping control and extra DSP capabilities like PEQ, GEQ, and delay for each group provide unprecedented control over audio output. Ideal for venues of all sizes, from music clubs to performance centres, the Dynacord L1300FD Live Series DSP Amplifier is a powerhouse that guarantees an unforgettable audio experience.Specifications:- Power Output: 2x600W @ 4Ω, 2x1000W @ 2Ω- Form Factor: 2U- FIR Drive technology- True 2 ohm stability- Advanced DSP features- True channel grouping control- Multiple PEQs, crossovers, limiters, and delay per channelProduct Specifications General Load Impedance: 2Ω 2.6Ω 4Ω 8Ω Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω=950W; 4Ω=660W; 8Ω=350W Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω=850W; 4Ω=600W; 8Ω=320W Maximum Output Power, Bridged: 4Ω=2000W; 8Ω=1200W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref 1 kHz, at 100 W/4 Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68 dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (⅛ Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg

Read more less

- High Output Power: With a maximum output power of 2x1700W @ 4Ω, the Dynacord C3600FDI Install Series DSP Power Amp ensures a robust and reliable performance, making it perfect for venues such as bars, churches, and sports facilities.- Advanced DSP Technology: Benefit from fully integrated professional speaker processing with FIR Drive technology, leading to market-leading acoustic performance and rock-solid reliability for an exceptional audio experience.- Easy System Control: The intuitive system control software simplifies setup and control, allowing you to effortlessly tailor the sound to suit your venue's specific requirements.Immerse your audience in a world of unparalleled audio quality with the Dynacord C3600FDI Install Series DSP Power Amp 2x1700W @ 4Ω. Designed for permanent installation applications, this powerhouse amplifier is the perfect choice for venues seeking to elevate their sound experience. Featuring cutting-edge DSP technology, this amplifier delivers fully integrated professional speaker processing with FIR Drive technology, ensuring market-leading acoustic performance and unmatched reliability. Whether you're setting up in a bar, church, restaurant, sports facility, or performing arts center, the Dynacord C3600FDI guarantees flawless operation even in the most demanding environments.Take control of your sound with the intuitive system control software, making setup and adjustments a breeze. With a maximum output power of 2x1700W @ 4Ω, this amplifier provides the high output power needed to fill your venue with crystal-clear sound. Elevate your audio experience with the Dynacord C3600FDI Install Series DSP Power Amp and set the stage for an unforgettable auditory journey.Product Specifications General Maximum Output Power, SIngle Channel: 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=3000W; 2.7Ω=2500W; 4Ω=1700W; 8Ω=900W; High Impedance= 70 V Operation=2 x 1250 W; 100 V Operation=2 x 2500 W Maximum Output Power, Bridged: Load Impedance= 4Ω=6000 W; 8Ω=3400 W; High Impedance= Not Recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 90.6V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >109dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 850 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance Direct Drive Load Capability: 100 V: 2 x 2500 W (-1.5 dB)* High Impedance Operation: 70V Operation & 100V Operation Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 18.2kg

Read more less

Elevate your audio experience with the Dynacord C2800FDI Install Series DSP Power Amp, a powerhouse amplifier designed for permanent installation applications. With exceptional acoustic performance and reliability, this 2U amplifier delivers 2x1300W @ 4Ω, guaranteeing crystal-clear sound and top-notch precision. The fully integrated professional speaker processing, including FIR Drive technology, ensures unparalleled sound quality, while the intuitive system control software allows for effortless setup and customisation. Perfect for venues like bars, churches, restaurants, sports facilities, and performing arts centres, this amplifier boasts a power-saving standby mode for energy efficiency. Upgrade your audio setup today and enjoy flawless operation in any environment with the Dynacord C2800FDI Install Series DSP Power Amp. Specifications:- Power Output: 2x1300W @ 4Ω- Design: 2U Compact Design- Speaker Processing: Fully Integrated Professional Speaker Processing with FIR Drive Technology- Operation: Low Z and 70/100V Options- Energy Efficiency: Power-Saving Standby ModeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω= 2300W; 2.7Ω= 2000W; 4Ω= 1400W; 8Ω= 700W; Maximum Output Power, Dual Channel: Load Impedance= 2Ω=2200W; 2.7Ω=1800W; 4Ω=1300W; 8Ω=650W; High Impedance= 70V Operation=2x 1250W; 100V Operation=2x 2500W Maximum Output Power, Bridged: Load Impedance= 4Ω=4400W; 8Ω=2600W; High Impedance= Not recommended Maximum RMS Voltage Swing, THD = 1%, 1kHz: 78.8V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05%% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >107dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class H Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 16.2kg

Read more less

Elevate your venue's audio experience with the Dynacord C1800FDI Install Series DSP Power Amplifier 2x850W @ 4Ω 2U. Designed for permanent installation applications, this powerhouse of an amplifier delivers exceptional sound performance, making it ideal for bars, churches, restaurants, sports facilities, and performing arts centers. Featuring advanced DSP technology with FIR Drive, this amplifier ensures market-leading acoustic performance and rock-solid reliability for your audio setup. Enjoy effortless system control with the intuitive software that simplifies setup and allows for tailored sound adjustments to suit your venue's specific requirements. The Dynacord C1800FDI is equipped with Euroblock connectors and a robust power supply, guaranteeing flawless operation even in demanding environments. Whether you need Low Z or 70/100V operation, this amplifier has got you covered. Benefit from power-saving standby mode for energy efficiency when not in use, ensuring cost-effective operation.Key specifications:- Maximum Output Power: 2x850W @ 4Ω- Speaker Processing: Fully integrated professional speaker processing with FIR Drive technology- Connectivity: Euroblock connectors- Operation: Low Z or 70/100V operation- System Control: Intuitive software for easy setup and sound adjustment- Energy Efficiency: Power-saving standby modeProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1600W; 2.6Ω= 1300W; 4Ω= 950W 8Ω= 480W Maximum Output Power, Dual Channel: Load Impedance= 2Ω=1400W; 2.6Ω=1200W; 4Ω=850W; 8Ω=450W; High Impedance= 70V Operation=2x 1250W; Maximum Output Power, Bridged: Load Impedance= 4Ω=2800W; 8Ω=1700W; High Impedance= 70V Operation=1x 600W; 100V Operation=1x 1250W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: <0.1% DIM 30: <0.05% Maximum Input Level: +21dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >105dB Output Noise , A-weighted: <-68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 700W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70 V: 2 x 1250 W (-1.5 dB)* 100 V: 1 x 1250 W (-1.5 dB)* High Impedance Operation: 70 V (dual channel), 100 V (bridged) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Remote Power ON/GPIO: Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection Total Harmonic Distortion: <0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 15.2kg

Read more less

Elevate your venue's audio experience to new heights with the Dynacord C1300FDI Install Series DSP Power Amplifier. This professional-grade power amplifier is designed for permanent installation applications to deliver exceptional sound quality and flawless operation. Featuring fully integrated professional speaker processing and FIR Drive technology, this power amp ensures crystal-clear sound reproduction, bringing your music to life with exceptional clarity. The robust power supply and powerful linear amp design guarantee uninterrupted performance in even the most demanding environments, providing rock-solid reliability for continuous use. The intuitive system control software allows for easy setup and control, enabling users to tailor their audio experience effortlessly. Immerse your audience in unparalleled sound quality with the Dynacord C1300FDI Install Series DSP Power Amplifier.Key Specifications:- Power Output: 2x600W @ 4Ω- Rack Unit Size: 2UProduct Specifications General Maximum Output Power, SIngle Channel: 2Ω=1100W; 2.6Ω= 950W; 4Ω= 660W; 8Ω= 350W (Load Impedance) Maximum Output Power, Dual Channel: 2Ω=1000W; 2.6Ω= 850W; 4Ω= 600W; 8Ω= 320W (Load Impedance) Maximum Output Power, Bridged: High Impedance= 2Ω & 2.6Ω=1x 600W; Load Impedance= 4Ω=2000W; 8Ω=1200W; Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3V Voltage Gain ref.1kHz: 32.0dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% Maximum Input Level: +21 dBu Crosstalk: < -80dB Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): >104dB Output Noise , A-weighted: < -68dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Colour: Black Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Direct Drive Load Capability: 70V: 1 x 625W (0.0 dB)* High Impedance Operation: 70V (in bridged mode) Operating Temperature Range: +5°C to +40°C (40°F to +105°F) Total Harmonic Distortion: < 0.05% Physical & Dimensions Height: 88mm Width: 483mm Depth: 462.4mm Weight: 12.9kg

Read more less

Elevate your audio setup to professional standards with the Dynacord SL2400 Class-H Power Amplifier. This powerhouse of performance and reliability is designed for the discerning audiophile who demands exceptional quality. With a maximum output power of 1200W @ 4Ω and 1800W @ 2Ω, the SL2400 delivers a high, stable power output with impressive efficiency, making it the perfect choice for a versatile range of mobile and club systems.Experience peace of mind with the comprehensive protection system of the SL2400, featuring turn-on-delay relays that safeguard your loudspeakers from damage. The integrated patented LPN filter compensates for transient distortion in dynamic signals, ensuring a smooth and uninterrupted audio performance. Additionally, the switchable Low-Pass Notch filter corrects the frequency response and optimizes the transient behavior of your loudspeakers, providing a premium audio experience with clear and accurate sound reproduction.Immerse yourself in the world of professional audio with the Dynacord SL2400 Class-H Power Amplifier. With its sleek black finish and robust design, the SL2400 is not just a power amp - it's a statement of quality and performance.Specifications:- Output Power: 2x1200W @ 4Ω, 2x1800W @ 2Ω- Form Factor: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 1200Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +6.6dBu (1.66Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 3600W, 8Ω - 2400W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1800W, 4Ω - 1200W, 8Ω - 750W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 3400W, 4Ω - 1800W, 8Ω - 950W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 17.1kg

Read more less

Elevate your audio experience with the Dynacord SL1800 Class-H Power Amplifier. Designed for both mobile and club systems, this power amp delivers unmatched power and efficiency, ideal for those who demand top performance. With a max output power of 900W @ 4Ω and 1250W @ 2Ω, you can enjoy crystal-clear sound quality at any volume level. Experience worry-free listening with the comprehensive protection system, including turn-on-delay relays and dynamic limiters, ensuring your loudspeakers are always safe. The integrated patented LPN filter corrects frequency response and optimizes transient behaviour, resulting in a truly immersive sound experience. Specifications:- Power Output: 2x900W @ 4Ω, 2x1250W @ 2Ω- Rack Space: 2U- Protection System: Turn-on-delay relays, dynamic limiters- Special Feature: Patented LPN filter for optimal sound qualityProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 900Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class H Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +5.1dBu (1.39Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 2800W, 8Ω - 1800W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 1250W, 4Ω - 900W, 8Ω - 550W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 2450W, 4Ω - 1400W, 8Ω - 700W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 16.3kg

Read more less

Experience superior audio performance with the Dynacord SL1200 Class-AB Power Amp. Designed for excellence, this power amp delivers a maximum output power of 2x600W @ 4Ω and 2x900W @ 2Ω, making it the ideal choice for a variety of mobile and club systems. Equipped with a comprehensive protection system and dynamic limiters, this power amp ensures the safety of your loudspeakers with features like turn-on-delay relays and the patented LPN filter, guarding against transient distortion in dynamic signals.Immerse yourself in crystal-clear sound quality with a frequency response of 10Hz to 40kHz (±1dB), delivering a dynamic and immersive listening experience. Elevate your audio setup with the Dynacord SL1200 Class-AB Power Amp and enjoy unparalleled performance and protection for your sound system.Specifications:- Power Output: 2x600W @ 4Ω, 2x900W @ 2Ω- Frequency Response: 10Hz to 40kHz (±1dB)- Maximum Input Level: +21dBuProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 600Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +3.1dBu (1.11Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1800W, 8Ω - 1200W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 900W, 4Ω - 600W, 8Ω - 380W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1700W, 4Ω - 950W, 8Ω - 480W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 14.8kg

Read more less

Experience unparalleled power and reliability with the Dynacord SL900 Class-AB Power Amplifier. Delivering an impressive 450W per channel at 4Ω, this amplifier is engineered to meet the demands of both mobile DJs and club systems. Its high stability and efficiency factor ensure a consistent and powerful performance, making it the ultimate choice for audio professionals. Equipped with a comprehensive protection system including dynamic limiters, turn-on-delay relays, and a patented LPN filter, this amplifier guarantees the safety and security of your equipment, especially your loudspeakers. The sleek black finish and compact 2U design not only exude professionalism but also signify durability and long-lasting performance. Elevate your audio setup today with the Dynacord SL900 Power Amplifier.Specifications:- Maximum Output Power: 450W per channel @ 4Ω- Power Output: 2x450W @ 4Ω, 2x650W @ 2Ω- Size: 2UProduct Specifications General Maximum Output Power, Single Channel @ 2Ω: 450Watts Voltage Gain, ref. 1 kHz: 32.0dB Maximum Input Level: +21dBu (8.69Vrms) Frequency Response, ref. 1 kHz: 10Hz…40kHz (±1dB) Output Stage Topology: Class AB Channels: 2 Input Sensitivity, rated power @ 8 Ω, 1 kHz: +2,2dBu (1,0Vrms) Maximum Bridged Output Power, THD = 1%, 1 kHz: 4Ω - 1300W, 8Ω - 900W Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel: 2Ω - 650W, 4Ω - 450W, 8Ω - 270W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A: 2Ω - 1150W, 4Ω - 660W, 8Ω - 350W Physical & Dimensions Height: 88.1mm Width: 483mm Depth: 421.5mm Weight: 12.6kg

Read more less

Discover the pinnacle of audio amplification with the Crown CT 8150 ComTech DriveCore Fanless Power Amplifier. Featuring cutting-edge DriveCore™ technology, this amplifier merges the amplifier drive stage and power output stage into a single chip, providing exceptional audio quality comparable to a Class AB design. Its versatile input routing and various power configurations, such as Auto-Standby and Deep Sleep modes, ensure adaptability to different setups. The sleek convection-cooled chassis of this amplifier operates silently, offering reliability and efficiency for your sound system. Elevate your audio experience with the Crown CT 8150 and enjoy unparalleled performance.Key Specifications:- Power Output: 8x125W @ 4Ω- Fanless Design: Convection-cooled for silent operation- Input Routing: Flexible input routing options- Power Configurations: Includes Auto-Standby and Deep Sleep modesProduct Specifications General Channels: 8 Sensitivity: 1.4V Rated Power Output: 125W per channel into 8/4 ohms Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-weighted): 110 dB Total Harmonic Distortion (full rated power, 1kHz): < 0.05% Intermodulation Response (from 0dB down to -30dB): < 0.05% Frequency Response: ± 0.5 dB Common Mode Rejection (20kHz to 1kHz): 70 dB Load Ranges: 4-160 Ohms Physical & Dimensions Height: 1.75" Width: 19" Depth: 15.19" Weight: 10lbs

Read more less

Elevate your sound system with the innovative Crown CT 4150 ComTech DriveCore Fanless Power Amplifier. Revolutionising the audio amplification industry, this 4-channel amplifier is designed to deliver unparalleled efficiency and performance. With DriveCore™ technology seamlessly integrating the amplifier drive stage with the power output stage, you can expect exceptional audio quality with a rated power output of 125W per channel at 4 ohms. The convection cooled chassis design ensures silent operation, making noisy fans a thing of the past. Featuring flexible input routing for versatile connectivity options, this amplifier is ideal for both professional sound engineers and passionate audiophiles. Immerse yourself in crystal-clear audio and experience the future of audio amplification with the Crown CT 4150.Specifications:- Power Output: 125W per channel @ 4 ohms- Cooling System: Convection cooled chassis design- Connectivity: Flexible input routingProduct Specifications General Channels: 4 Sensitivity: 1.4 V Rated Power Output (all channels driven): 125W per CH @ 4 ohms, 125W per CH @ 8 ohms Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted): 110 dB THD (full rated power, 20 Hz - 20 kHz): < 0.05% Intermodulation Distortion (from 0 dB down to -30 dB): < 0.05% Frequency Response (at 1W, 4/8 ohms): +/- 0.5 dB Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB Common Mode Rejection (20 Hz to 1 kHz): > 55 dB, typically > 70 dB Voltage Gain: 27 dB DC Offset: +/- 20mV Idle Power Consumption (Standard Mode): 17.5W Physical & Dimensions Height: 1.75" Width: 19" Depth: 15.19" Weight: 10lbs

Read more less